Hi all
I recently had to reinstall after an SSD death. However geany is not accepting my tag files. These are the same ones I used for a long time before. They are in pipe format. I tried loading them from Tools > Load Tags. In the status bar below, it says "Could not load tags file .....". In the debug message it says "Unknown filetype for file ..."
I created a simple file and called it simple.txt.tags and it has the following stuff.
# format=pipe testinga||| dingbat|||
It still does not load and says unknown file type.
What am I missing?
Thanks
Hi Rue,
I recently had to reinstall after an SSD death. However geany is not accepting my tag files. These are the same ones I used for a long time before. They are in pipe format. I tried loading them from Tools > Load Tags. In the status bar below, it says "Could not load tags file .....". In the debug message it says "Unknown filetype for file ..."
I created a simple file and called it simple.txt.tags and it has the
do you have any filetype configured with the extensions ".txt"? The filename part before ".tags", in your case "txt" need to match a known filetype for Geany. This filetype is used to load the tags for as tags are always bound to filetypes.
Regards, Enrico
Hi Enrico
I do. When I go to the tab I was hoping to get the tags to autocomplete, Document > Set FileType shows txt checked.
Thanks
On Thu, Oct 14, 2021 at 3:02 PM Enrico Tröger enrico.troeger@uvena.de wrote:
Hi Rue,
I recently had to reinstall after an SSD death. However geany is not accepting my tag files. These are the same ones I used for a long time before. They are in pipe format. I tried loading them from Tools > Load Tags. In the status bar below, it says "Could not load tags file .....". In the debug message it says "Unknown filetype for file ..."
I created a simple file and called it simple.txt.tags and it has the
do you have any filetype configured with the extensions ".txt"? The filename part before ".tags", in your case "txt" need to match a known filetype for Geany. This filetype is used to load the tags for as tags are always bound to filetypes.
Regards, Enrico
-- Get my GPG key from https://www.uvena.de/pub.asc _______________________________________________ Users mailing list Users@lists.geany.org https://lists.geany.org/cgi-bin/mailman/listinfo/users
I've created a custom filetype named "txt" and saved your posted tags file and then I could load it successfully.
So, I assume there is something wrong with your configuration. Could you post your filetype configuration for "txt"?
Regards, Enrico
On 14.10.21 22:09, Rue Sixteen wrote:
Hi Enrico
I do. When I go to the tab I was hoping to get the tags to autocomplete, Document > Set FileType shows txt checked.
Thanks
On Thu, Oct 14, 2021 at 3:02 PM Enrico Tröger <enrico.troeger@uvena.de mailto:enrico.troeger@uvena.de> wrote:
Hi Rue, > I recently had to reinstall after an SSD death. However geany is not > accepting my tag files. These are the same ones I used for a long time > before. They are in pipe format. I tried loading them from Tools > Load > Tags. > In the status bar below, it says "Could not load tags file .....". In > the debug message it says "Unknown filetype for file ..." > > I created a simple file and called it simple.txt.tags and it has the do you have any filetype configured with the extensions ".txt"? The filename part before ".tags", in your case "txt" need to match a known filetype for Geany. This filetype is used to load the tags for as tags are always bound to filetypes. Regards, Enrico -- Get my GPG key from https://www.uvena.de/pub.asc <https://www.uvena.de/pub.asc> _______________________________________________ Users mailing list Users@lists.geany.org <mailto:Users@lists.geany.org> https://lists.geany.org/cgi-bin/mailman/listinfo/users <https://lists.geany.org/cgi-bin/mailman/listinfo/users>
That is interesting.
Below is $USER/.config/geany/filedefs/filetypes.txt.conf # For complete documentation of this file, please see Geany's main documentation [styling] # Edit these in the colorscheme .conf file instead default=default comment=comment tag=tag class=class pseudoclass=string_1 unknown_pseudoclass=default unknown_identifier=default operator=operator identifier=keyword_2 doublestring=string_1 singlestring=string_2 attribute=attribute value=value id=class identifier2=keyword_2 variable=identifier_1 important=error directive=preprocessor identifier3=keyword_1 pseudoelement=string_2 extended_identifier=keyword_1 extended_pseudoclass=string_1 extended_pseudoelement=string_2 media=parameter
[keywords]
[settings] # default extension used when saving files extension=txt tag_parser=COBOL # MIME type mime_type=text/plain
[indentation]
Thanks
On Thu, Oct 14, 2021 at 3:31 PM Enrico Tröger enrico.troeger@uvena.de wrote:
I've created a custom filetype named "txt" and saved your posted tags file and then I could load it successfully.
So, I assume there is something wrong with your configuration. Could you post your filetype configuration for "txt"?
Regards, Enrico
On 14.10.21 22:09, Rue Sixteen wrote:
Hi Enrico
I do. When I go to the tab I was hoping to get the tags to autocomplete, Document > Set FileType shows txt checked.
Thanks
On Thu, Oct 14, 2021 at 3:02 PM Enrico Tröger <enrico.troeger@uvena.de mailto:enrico.troeger@uvena.de> wrote:
Hi Rue, > I recently had to reinstall after an SSD death. However geany isnot
> accepting my tag files. These are the same ones I used for a long time > before. They are in pipe format. I tried loading them from Tools > Load > Tags. > In the status bar below, it says "Could not load tags file .....". In > the debug message it says "Unknown filetype for file ..." > > I created a simple file and called it simple.txt.tags and it hasthe
do you have any filetype configured with the extensions ".txt"? The filename part before ".tags", in your case "txt" need to match a known filetype for Geany. This filetype is used to load the tags foras
tags are always bound to filetypes. Regards, Enrico -- Get my GPG key from https://www.uvena.de/pub.asc <https://www.uvena.de/pub.asc> _______________________________________________ Users mailing list Users@lists.geany.org <mailto:Users@lists.geany.org> https://lists.geany.org/cgi-bin/mailman/listinfo/users <https://lists.geany.org/cgi-bin/mailman/listinfo/users>
Users mailing list Users@lists.geany.org https://lists.geany.org/cgi-bin/mailman/listinfo/users
There must be something else wrong.
If I use the tags file and the custom filetype you provided here, I can successfully load the tags: 13:29:31.561147: Geany INFO : Loaded /tmp/test.txt.tags (txt), 2 symbol(s).
Maybe the whole output of Help->Debug Messages could give a hint.
Regards, Enrico
On 14.10.21 22:48, Rue Sixteen wrote:
That is interesting.
Below is $USER/.config/geany/filedefs/filetypes.txt.conf # For complete documentation of this file, please see Geany's main documentation [styling] # Edit these in the colorscheme .conf file instead default=default comment=comment tag=tag class=class pseudoclass=string_1 unknown_pseudoclass=default unknown_identifier=default operator=operator identifier=keyword_2 doublestring=string_1 singlestring=string_2 attribute=attribute value=value id=class identifier2=keyword_2 variable=identifier_1 important=error directive=preprocessor identifier3=keyword_1 pseudoelement=string_2 extended_identifier=keyword_1 extended_pseudoclass=string_1 extended_pseudoelement=string_2 media=parameter
[keywords]
[settings] # default extension used when saving files extension=txt tag_parser=COBOL # MIME type mime_type=text/plain
[indentation]
Thanks
On Thu, Oct 14, 2021 at 3:31 PM Enrico Tröger <enrico.troeger@uvena.de mailto:enrico.troeger@uvena.de> wrote:
I've created a custom filetype named "txt" and saved your posted tags file and then I could load it successfully. So, I assume there is something wrong with your configuration. Could you post your filetype configuration for "txt"? Regards, Enrico On 14.10.21 22:09, Rue Sixteen wrote: > Hi Enrico > > I do. When I go to the tab I was hoping to get the tags to autocomplete, > Document > Set FileType shows txt checked. > > Thanks > > On Thu, Oct 14, 2021 at 3:02 PM Enrico Tröger <enrico.troeger@uvena.de <mailto:enrico.troeger@uvena.de> > <mailto:enrico.troeger@uvena.de <mailto:enrico.troeger@uvena.de>>> wrote: > > Hi Rue, > > > I recently had to reinstall after an SSD death. However geany is not > > accepting my tag files. These are the same ones I used for a long > time > > before. They are in pipe format. I tried loading them from Tools > > Load > > Tags. > > In the status bar below, it says "Could not load tags file > .....". In > > the debug message it says "Unknown filetype for file ..." > > > > I created a simple file and called it simple.txt.tags and it has the > > do you have any filetype configured with the extensions ".txt"? > The filename part before ".tags", in your case "txt" need to match a > known filetype for Geany. This filetype is used to load the tags for as > tags are always bound to filetypes. > > > Regards, > Enrico > > -- > Get my GPG key from https://www.uvena.de/pub.asc <https://www.uvena.de/pub.asc> > <https://www.uvena.de/pub.asc <https://www.uvena.de/pub.asc>> > _______________________________________________ > Users mailing list > Users@lists.geany.org <mailto:Users@lists.geany.org> <mailto:Users@lists.geany.org <mailto:Users@lists.geany.org>> > https://lists.geany.org/cgi-bin/mailman/listinfo/users <https://lists.geany.org/cgi-bin/mailman/listinfo/users> > <https://lists.geany.org/cgi-bin/mailman/listinfo/users <https://lists.geany.org/cgi-bin/mailman/listinfo/users>> > _______________________________________________ Users mailing list Users@lists.geany.org <mailto:Users@lists.geany.org> https://lists.geany.org/cgi-bin/mailman/listinfo/users <https://lists.geany.org/cgi-bin/mailman/listinfo/users>
Users mailing list Users@lists.geany.org https://lists.geany.org/cgi-bin/mailman/listinfo/users
Sorry for the late reply. Debug info below.
I am trying to use the tags in txt.txt.tags to show up in n1.txt - which is recognized as txt file but as txt [UTF-8]. I don't know whether that is the problem.
07:19:16: GLib-GIO DEBUG : _g_io_module_get_default: Found default implementation gvfs (GDaemonVfs) for ‘gio-vfs’ 07:19:16: Geany INFO : Geany 1.37.1, en_US.UTF-8 07:19:16: Geany INFO : GTK 3.24.30, GLib 2.70.0 07:19:16: Geany INFO : OS: Manjaro Linux 07:19:16: Geany INFO : System data dir: /usr/share/geany 07:19:16: Geany INFO : User config dir: /home/xxxx/.config/geany 07:19:16: Geany INFO : Loaded GTK+ CSS theme '/usr/share/geany/geany.css' 07:19:16: Geany INFO : Loaded GTK+ CSS theme '/usr/share/geany/geany-3.20.css' 07:19:16: Geany INFO : System plugin path: /usr/lib/geany 07:19:16: Geany INFO : Added filetype JSON (63). 07:19:16: Geany INFO : Added filetype Graphviz (64). 07:19:16: Geany INFO : Added filetype Nim (65). 07:19:16: Geany INFO : Added filetype Swift (66). 07:19:16: Geany INFO : Added filetype Clojure (67). 07:19:16: Geany INFO : Added filetype Groovy (68). 07:19:16: Geany INFO : Added filetype CUDA (69). 07:19:16: Geany INFO : Added filetype Kotlin (70). 07:19:16: Geany INFO : Added filetype Cython (71). 07:19:16: Geany INFO : Added filetype TypeScript (72). 07:19:16: Geany INFO : Added filetype Genie (73). 07:19:16: Geany INFO : Added filetype Scala (74). 07:19:16: Geany INFO : Added filetype Arduino (75). 07:19:16: Geany INFO : Added filetype stf (76). 07:19:16: Geany INFO : Added filetype txt (77). 07:19:16: Geany INFO : Loaded libvte from libvte-2.91.so 07:19:16: Geany INFO : Unknown filetype for file '/home/xxxx/.config/geany/tags/stf.stf.tags'. 07:19:16: Geany INFO : Unknown filetype for file '/home/xxxx/.config/geany/tags/txt.txt.tags'. 07:19:16: Geany INFO : /home/xxxx/Documents/n1.txt : txt (UTF-8) 15:41:24: GLib-GIO DEBUG : _g_io_module_get_default: Found default implementation dconf (DConfSettingsBackend) for ‘gsettings-backend’
Thanks
On Sat, Oct 16, 2021 at 6:32 AM Enrico Tröger enrico.troeger@uvena.de wrote:
There must be something else wrong.
If I use the tags file and the custom filetype you provided here, I can successfully load the tags: 13:29:31.561147: Geany INFO : Loaded /tmp/test.txt.tags (txt), 2 symbol(s).
Maybe the whole output of Help->Debug Messages could give a hint.
Regards, Enrico
On 14.10.21 22:48, Rue Sixteen wrote:
That is interesting.
Below is $USER/.config/geany/filedefs/filetypes.txt.conf # For complete documentation of this file, please see Geany's main documentation [styling] # Edit these in the colorscheme .conf file instead default=default comment=comment tag=tag class=class pseudoclass=string_1 unknown_pseudoclass=default unknown_identifier=default operator=operator identifier=keyword_2 doublestring=string_1 singlestring=string_2 attribute=attribute value=value id=class identifier2=keyword_2 variable=identifier_1 important=error directive=preprocessor identifier3=keyword_1 pseudoelement=string_2 extended_identifier=keyword_1 extended_pseudoclass=string_1 extended_pseudoelement=string_2 media=parameter
[keywords]
[settings] # default extension used when saving files extension=txt tag_parser=COBOL # MIME type mime_type=text/plain
[indentation]
Thanks
On Thu, Oct 14, 2021 at 3:31 PM Enrico Tröger <enrico.troeger@uvena.de mailto:enrico.troeger@uvena.de> wrote:
I've created a custom filetype named "txt" and saved your posted tags file and then I could load it successfully. So, I assume there is something wrong with your configuration. Could you post your filetype configuration for "txt"? Regards, Enrico On 14.10.21 22:09, Rue Sixteen wrote: > Hi Enrico > > I do. When I go to the tab I was hoping to get the tags to autocomplete, > Document > Set FileType shows txt checked. > > Thanks > > On Thu, Oct 14, 2021 at 3:02 PM Enrico Tröger <enrico.troeger@uvena.de <mailto:enrico.troeger@uvena.de> > <mailto:enrico.troeger@uvena.de <mailto:enrico.troeger@uvena.de>>> wrote: > > Hi Rue, > > > I recently had to reinstall after an SSD death. However geany is not > > accepting my tag files. These are the same ones I used for a long > time > > before. They are in pipe format. I tried loading them from Tools > > Load > > Tags. > > In the status bar below, it says "Could not load tags file > .....". In > > the debug message it says "Unknown filetype for file ..." > > > > I created a simple file and called it simple.txt.tags and it has the > > do you have any filetype configured with the extensions".txt"?
> The filename part before ".tags", in your case "txt" need to match a > known filetype for Geany. This filetype is used to load the tags for as > tags are always bound to filetypes. > > > Regards, > Enrico > > -- > Get my GPG key from https://www.uvena.de/pub.asc <https://www.uvena.de/pub.asc> > <https://www.uvena.de/pub.asc <https://www.uvena.de/pub.asc>> > _______________________________________________ > Users mailing list > Users@lists.geany.org <mailto:Users@lists.geany.org> <mailto:Users@lists.geany.org <mailto:Users@lists.geany.org>> > https://lists.geany.org/cgi-bin/mailman/listinfo/users <https://lists.geany.org/cgi-bin/mailman/listinfo/users> > <https://lists.geany.org/cgi-bin/mailman/listinfo/users <https://lists.geany.org/cgi-bin/mailman/listinfo/users>> > _______________________________________________ Users mailing list Users@lists.geany.org <mailto:Users@lists.geany.org> https://lists.geany.org/cgi-bin/mailman/listinfo/users <https://lists.geany.org/cgi-bin/mailman/listinfo/users>
Users mailing list Users@lists.geany.org https://lists.geany.org/cgi-bin/mailman/listinfo/users
Users mailing list Users@lists.geany.org https://lists.geany.org/cgi-bin/mailman/listinfo/users
Ok, I think you are just missing an item for your custom filetypes in ~/.config/geany/filetype_extensions.conf like:
txt=*.txt;
in the [Extensions] section. Geany uses this mapping to associate tags files based on their extension to the configured filetypes.
Regards, Enrico
On 19.10.21 22:45, Rue Sixteen wrote:
Sorry for the late reply. Debug info below.
I am trying to use the tags in txt.txt.tags to show up in n1.txt - which is recognized as txt file but as txt [UTF-8]. I don't know whether that is the problem.
07:19:16: GLib-GIO DEBUG : _g_io_module_get_default: Found default implementation gvfs (GDaemonVfs) for ‘gio-vfs’ 07:19:16: Geany INFO : Geany 1.37.1, en_US.UTF-8 07:19:16: Geany INFO : GTK 3.24.30, GLib 2.70.0 07:19:16: Geany INFO : OS: Manjaro Linux 07:19:16: Geany INFO : System data dir: /usr/share/geany 07:19:16: Geany INFO : User config dir: /home/xxxx/.config/geany 07:19:16: Geany INFO : Loaded GTK+ CSS theme '/usr/share/geany/geany.css' 07:19:16: Geany INFO : Loaded GTK+ CSS theme '/usr/share/geany/geany-3.20.css' 07:19:16: Geany INFO : System plugin path: /usr/lib/geany 07:19:16: Geany INFO : Added filetype JSON (63). 07:19:16: Geany INFO : Added filetype Graphviz (64). 07:19:16: Geany INFO : Added filetype Nim (65). 07:19:16: Geany INFO : Added filetype Swift (66). 07:19:16: Geany INFO : Added filetype Clojure (67). 07:19:16: Geany INFO : Added filetype Groovy (68). 07:19:16: Geany INFO : Added filetype CUDA (69). 07:19:16: Geany INFO : Added filetype Kotlin (70). 07:19:16: Geany INFO : Added filetype Cython (71). 07:19:16: Geany INFO : Added filetype TypeScript (72). 07:19:16: Geany INFO : Added filetype Genie (73). 07:19:16: Geany INFO : Added filetype Scala (74). 07:19:16: Geany INFO : Added filetype Arduino (75). 07:19:16: Geany INFO : Added filetype stf (76). 07:19:16: Geany INFO : Added filetype txt (77). 07:19:16: Geany INFO : Loaded libvte from libvte-2.91.so http://libvte-2.91.so 07:19:16: Geany INFO : Unknown filetype for file '/home/xxxx/.config/geany/tags/stf.stf.tags'. 07:19:16: Geany INFO : Unknown filetype for file '/home/xxxx/.config/geany/tags/txt.txt.tags'. 07:19:16: Geany INFO : /home/xxxx/Documents/n1.txt : txt (UTF-8) 15:41:24: GLib-GIO DEBUG : _g_io_module_get_default: Found default implementation dconf (DConfSettingsBackend) for ‘gsettings-backend’
Thanks
On Sat, Oct 16, 2021 at 6:32 AM Enrico Tröger <enrico.troeger@uvena.de mailto:enrico.troeger@uvena.de> wrote:
There must be something else wrong. If I use the tags file and the custom filetype you provided here, I can successfully load the tags: 13:29:31.561147: Geany INFO : Loaded /tmp/test.txt.tags (txt), 2 symbol(s). Maybe the whole output of Help->Debug Messages could give a hint. Regards, Enrico On 14.10.21 22:48, Rue Sixteen wrote: > That is interesting. > > Below is $USER/.config/geany/filedefs/filetypes.txt.conf > # For complete documentation of this file, please see Geany's main > documentation > [styling] > # Edit these in the colorscheme .conf file instead > default=default > comment=comment > tag=tag > class=class > pseudoclass=string_1 > unknown_pseudoclass=default > unknown_identifier=default > operator=operator > identifier=keyword_2 > doublestring=string_1 > singlestring=string_2 > attribute=attribute > value=value > id=class > identifier2=keyword_2 > variable=identifier_1 > important=error > directive=preprocessor > identifier3=keyword_1 > pseudoelement=string_2 > extended_identifier=keyword_1 > extended_pseudoclass=string_1 > extended_pseudoelement=string_2 > media=parameter > > [keywords] > > [settings] > # default extension used when saving files > extension=txt > tag_parser=COBOL > # MIME type > mime_type=text/plain > > > [indentation] > > > > Thanks > > > On Thu, Oct 14, 2021 at 3:31 PM Enrico Tröger <enrico.troeger@uvena.de <mailto:enrico.troeger@uvena.de> > <mailto:enrico.troeger@uvena.de <mailto:enrico.troeger@uvena.de>>> wrote: > > > I've created a custom filetype named "txt" and saved your posted tags > file and then I could load it successfully. > > So, I assume there is something wrong with your configuration. > Could you post your filetype configuration for "txt"? > > Regards, > Enrico > > > On 14.10.21 22:09, Rue Sixteen wrote: > > Hi Enrico > > > > I do. When I go to the tab I was hoping to get the tags to > autocomplete, > > Document > Set FileType shows txt checked. > > > > Thanks > > > > On Thu, Oct 14, 2021 at 3:02 PM Enrico Tröger > <enrico.troeger@uvena.de <mailto:enrico.troeger@uvena.de> <mailto:enrico.troeger@uvena.de <mailto:enrico.troeger@uvena.de>> > > <mailto:enrico.troeger@uvena.de <mailto:enrico.troeger@uvena.de> > <mailto:enrico.troeger@uvena.de <mailto:enrico.troeger@uvena.de>>>> wrote: > > > > Hi Rue, > > > > > I recently had to reinstall after an SSD death. However > geany is not > > > accepting my tag files. These are the same ones I used for > a long > > time > > > before. They are in pipe format. I tried loading them from > Tools > > > Load > > > Tags. > > > In the status bar below, it says "Could not load tags file > > .....". In > > > the debug message it says "Unknown filetype for file ..." > > > > > > I created a simple file and called it simple.txt.tags and > it has the > > > > do you have any filetype configured with the extensions ".txt"? > > The filename part before ".tags", in your case "txt" need to > match a > > known filetype for Geany. This filetype is used to load the > tags for as > > tags are always bound to filetypes. > > > > > > Regards, > > Enrico > > > > -- > > Get my GPG key from https://www.uvena.de/pub.asc <https://www.uvena.de/pub.asc> > <https://www.uvena.de/pub.asc <https://www.uvena.de/pub.asc>> > > <https://www.uvena.de/pub.asc <https://www.uvena.de/pub.asc> <https://www.uvena.de/pub.asc <https://www.uvena.de/pub.asc>>>
Hi
I added that now. Still says unable to load tag file. filetype_extensions.conf says txt=*.txt; I removed everything else from it and only the line above exists. All other lines were commented out anyway before. Weird thing is geany works in my laptop but not desktop, both have same Manjaro with same config/setup!!
Thanks
Debug info below. 16:58:43: GLib-GIO DEBUG : _g_io_module_get_default: Found default implementation gvfs (GDaemonVfs) for ‘gio-vfs’ 16:58:43: Geany INFO : Geany 1.37.1, en_US.UTF-8 16:58:43: Geany INFO : GTK 3.24.30, GLib 2.70.0 16:58:43: Geany INFO : OS: Manjaro Linux 16:58:43: Geany INFO : System data dir: /usr/share/geany 16:58:43: Geany INFO : User config dir: /home/xxxx/.config/geany 16:58:43: Geany INFO : Loaded GTK+ CSS theme '/usr/share/geany/geany.css' 16:58:43: Geany INFO : Loaded GTK+ CSS theme '/usr/share/geany/geany-3.20.css' 16:58:43: Geany INFO : System plugin path: /usr/lib/geany 16:58:43: Geany INFO : Added filetype JSON (63). 16:58:43: Geany INFO : Added filetype Graphviz (64). 16:58:43: Geany INFO : Added filetype Nim (65). 16:58:43: Geany INFO : Added filetype Swift (66). 16:58:43: Geany INFO : Added filetype Clojure (67). 16:58:43: Geany INFO : Added filetype Groovy (68). 16:58:43: Geany INFO : Added filetype CUDA (69). 16:58:43: Geany INFO : Added filetype Kotlin (70). 16:58:43: Geany INFO : Added filetype Cython (71). 16:58:43: Geany INFO : Added filetype TypeScript (72). 16:58:43: Geany INFO : Added filetype Genie (73). 16:58:43: Geany INFO : Added filetype Scala (74). 16:58:43: Geany INFO : Added filetype Arduino (75). 16:58:43: Geany INFO : Added filetype stf (76). 16:58:43: Geany INFO : Added filetype txt (77). 16:58:43: Geany INFO : Loaded libvte from libvte-2.91.so 16:58:43: Geany INFO : Unknown filetype for file '/home/xxxx/.config/geany/tags/stf.stf.tags'. 16:58:43: Geany INFO : Unknown filetype for file '/home/xxxx/.config/geany/tags/txt.txt.tags'. 16:58:44: Geany INFO : /home/xxxx/Documents/n1.txt : txt (UTF-8) 16:58:49: GLib-GIO DEBUG : _g_io_module_get_default: Found default implementation dconf (DConfSettingsBackend) for ‘gsettings-backend’
On Wed, Oct 20, 2021 at 4:48 PM Enrico Tröger enrico.troeger@uvena.de wrote:
Ok, I think you are just missing an item for your custom filetypes in ~/.config/geany/filetype_extensions.conf like:
txt=*.txt;
in the [Extensions] section. Geany uses this mapping to associate tags files based on their extension to the configured filetypes.
Regards, Enrico
On 19.10.21 22:45, Rue Sixteen wrote:
Sorry for the late reply. Debug info below.
I am trying to use the tags in txt.txt.tags to show up in n1.txt - which is recognized as txt file but as txt [UTF-8]. I don't know whether that is the problem.
07:19:16: GLib-GIO DEBUG : _g_io_module_get_default: Found default implementation gvfs (GDaemonVfs) for ‘gio-vfs’ 07:19:16: Geany INFO : Geany 1.37.1, en_US.UTF-8 07:19:16: Geany INFO : GTK 3.24.30, GLib 2.70.0 07:19:16: Geany INFO : OS: Manjaro Linux 07:19:16: Geany INFO : System data dir: /usr/share/geany 07:19:16: Geany INFO : User config dir: /home/xxxx/.config/geany 07:19:16: Geany INFO : Loaded GTK+ CSS theme '/usr/share/geany/geany.css' 07:19:16: Geany INFO : Loaded GTK+ CSS theme '/usr/share/geany/geany-3.20.css' 07:19:16: Geany INFO : System plugin path: /usr/lib/geany 07:19:16: Geany INFO : Added filetype JSON (63). 07:19:16: Geany INFO : Added filetype Graphviz (64). 07:19:16: Geany INFO : Added filetype Nim (65). 07:19:16: Geany INFO : Added filetype Swift (66). 07:19:16: Geany INFO : Added filetype Clojure (67). 07:19:16: Geany INFO : Added filetype Groovy (68). 07:19:16: Geany INFO : Added filetype CUDA (69). 07:19:16: Geany INFO : Added filetype Kotlin (70). 07:19:16: Geany INFO : Added filetype Cython (71). 07:19:16: Geany INFO : Added filetype TypeScript (72). 07:19:16: Geany INFO : Added filetype Genie (73). 07:19:16: Geany INFO : Added filetype Scala (74). 07:19:16: Geany INFO : Added filetype Arduino (75). 07:19:16: Geany INFO : Added filetype stf (76). 07:19:16: Geany INFO : Added filetype txt (77). 07:19:16: Geany INFO : Loaded libvte from libvte-2.91.so http://libvte-2.91.so 07:19:16: Geany INFO : Unknown filetype for file '/home/xxxx/.config/geany/tags/stf.stf.tags'. 07:19:16: Geany INFO : Unknown filetype for file '/home/xxxx/.config/geany/tags/txt.txt.tags'. 07:19:16: Geany INFO : /home/xxxx/Documents/n1.txt : txt (UTF-8) 15:41:24: GLib-GIO DEBUG : _g_io_module_get_default: Found default implementation dconf (DConfSettingsBackend) for ‘gsettings-backend’
Thanks
On Sat, Oct 16, 2021 at 6:32 AM Enrico Tröger <enrico.troeger@uvena.de mailto:enrico.troeger@uvena.de> wrote:
There must be something else wrong. If I use the tags file and the custom filetype you provided here, Ican
successfully load the tags: 13:29:31.561147: Geany INFO : Loaded /tmp/test.txt.tags (txt), 2 symbol(s). Maybe the whole output of Help->Debug Messages could give a hint. Regards, Enrico On 14.10.21 22:48, Rue Sixteen wrote: > That is interesting. > > Below is $USER/.config/geany/filedefs/filetypes.txt.conf > # For complete documentation of this file, please see Geany's main > documentation > [styling] > # Edit these in the colorscheme .conf file instead > default=default > comment=comment > tag=tag > class=class > pseudoclass=string_1 > unknown_pseudoclass=default > unknown_identifier=default > operator=operator > identifier=keyword_2 > doublestring=string_1 > singlestring=string_2 > attribute=attribute > value=value > id=class > identifier2=keyword_2 > variable=identifier_1 > important=error > directive=preprocessor > identifier3=keyword_1 > pseudoelement=string_2 > extended_identifier=keyword_1 > extended_pseudoclass=string_1 > extended_pseudoelement=string_2 > media=parameter > > [keywords] > > [settings] > # default extension used when saving files > extension=txt > tag_parser=COBOL > # MIME type > mime_type=text/plain > > > [indentation] > > > > Thanks > > > On Thu, Oct 14, 2021 at 3:31 PM Enrico Tröger <enrico.troeger@uvena.de <mailto:enrico.troeger@uvena.de> > <mailto:enrico.troeger@uvena.de <mailto:enrico.troeger@uvena.de>>> wrote: > > > I've created a custom filetype named "txt" and saved your posted tags > file and then I could load it successfully. > > So, I assume there is something wrong with your configuration. > Could you post your filetype configuration for "txt"? > > Regards, > Enrico > > > On 14.10.21 22:09, Rue Sixteen wrote: > > Hi Enrico > > > > I do. When I go to the tab I was hoping to get the tags to > autocomplete, > > Document > Set FileType shows txt checked. > > > > Thanks > > > > On Thu, Oct 14, 2021 at 3:02 PM Enrico Tröger > <enrico.troeger@uvena.de <mailto:enrico.troeger@uvena.de> <mailto:enrico.troeger@uvena.de <mailto:enrico.troeger@uvena.de>> > > <mailto:enrico.troeger@uvena.de <mailto:enrico.troeger@uvena.de> > <mailto:enrico.troeger@uvena.de <mailto:enrico.troeger@uvena.de>>>> wrote: > > > > Hi Rue, > > > > > I recently had to reinstall after an SSD death.However
> geany is not > > > accepting my tag files. These are the same ones I used for > a long > > time > > > before. They are in pipe format. I tried loading them from > Tools > > > Load > > > Tags. > > > In the status bar below, it says "Could not load tags file > > .....". In > > > the debug message it says "Unknown filetype for file ..." > > > > > > I created a simple file and called it simple.txt.tags and > it has the > > > > do you have any filetype configured with the extensions ".txt"? > > The filename part before ".tags", in your case "txt" need to > match a > > known filetype for Geany. This filetype is used to load the > tags for as > > tags are always bound to filetypes. > > > > > > Regards, > > Enrico > > > > -- > > Get my GPG key from https://www.uvena.de/pub.asc <https://www.uvena.de/pub.asc> > <https://www.uvena.de/pub.asc <https://www.uvena.de/pub.asc>> > > <https://www.uvena.de/pub.asc <https://www.uvena.de/pub.asc> <https://www.uvena.de/pub.asc <https://www.uvena.de/pub.asc>>>
Users mailing list Users@lists.geany.org https://lists.geany.org/cgi-bin/mailman/listinfo/users
Just to get sure: in filetype_extensions.conf there exists the line [Extensions] and it is uncommented before "txt=*.txt;"? Otherwise it can't work.
If that doesn't help either, did you compare the Geany config folder on both machines for differences?
On 21.10.21 00:03, Rue Sixteen wrote:
Hi
I added that now. Still says unable to load tag file. filetype_extensions.conf says txt=*.txt; I removed everything else from it and only the line above exists. All other lines were commented out anyway before. Weird thing is geany works in my laptop but not desktop, both have same Manjaro with same config/setup!!
Thanks
Debug info below. 16:58:43: GLib-GIO DEBUG : _g_io_module_get_default: Found default implementation gvfs (GDaemonVfs) for ‘gio-vfs’ 16:58:43: Geany INFO : Geany 1.37.1, en_US.UTF-8 16:58:43: Geany INFO : GTK 3.24.30, GLib 2.70.0 16:58:43: Geany INFO : OS: Manjaro Linux 16:58:43: Geany INFO : System data dir: /usr/share/geany 16:58:43: Geany INFO : User config dir: /home/xxxx/.config/geany 16:58:43: Geany INFO : Loaded GTK+ CSS theme '/usr/share/geany/geany.css' 16:58:43: Geany INFO : Loaded GTK+ CSS theme '/usr/share/geany/geany-3.20.css' 16:58:43: Geany INFO : System plugin path: /usr/lib/geany 16:58:43: Geany INFO : Added filetype JSON (63). 16:58:43: Geany INFO : Added filetype Graphviz (64). 16:58:43: Geany INFO : Added filetype Nim (65). 16:58:43: Geany INFO : Added filetype Swift (66). 16:58:43: Geany INFO : Added filetype Clojure (67). 16:58:43: Geany INFO : Added filetype Groovy (68). 16:58:43: Geany INFO : Added filetype CUDA (69). 16:58:43: Geany INFO : Added filetype Kotlin (70). 16:58:43: Geany INFO : Added filetype Cython (71). 16:58:43: Geany INFO : Added filetype TypeScript (72). 16:58:43: Geany INFO : Added filetype Genie (73). 16:58:43: Geany INFO : Added filetype Scala (74). 16:58:43: Geany INFO : Added filetype Arduino (75). 16:58:43: Geany INFO : Added filetype stf (76). 16:58:43: Geany INFO : Added filetype txt (77). 16:58:43: Geany INFO : Loaded libvte from libvte-2.91.so http://libvte-2.91.so 16:58:43: Geany INFO : Unknown filetype for file '/home/xxxx/.config/geany/tags/stf.stf.tags'. 16:58:43: Geany INFO : Unknown filetype for file '/home/xxxx/.config/geany/tags/txt.txt.tags'. 16:58:44: Geany INFO : /home/xxxx/Documents/n1.txt : txt (UTF-8) 16:58:49: GLib-GIO DEBUG : _g_io_module_get_default: Found default implementation dconf (DConfSettingsBackend) for ‘gsettings-backend’
On Wed, Oct 20, 2021 at 4:48 PM Enrico Tröger <enrico.troeger@uvena.de mailto:enrico.troeger@uvena.de> wrote:
Ok, I think you are just missing an item for your custom filetypes in ~/.config/geany/filetype_extensions.conf like: txt=*.txt; in the [Extensions] section. Geany uses this mapping to associate tags files based on their extension to the configured filetypes. Regards, Enrico On 19.10.21 22:45, Rue Sixteen wrote: > Sorry for the late reply. Debug info below. > > I am trying to use the tags in txt.txt.tags to show up in n1.txt - which > is recognized as txt file but as txt [UTF-8]. I don't know whether that > is the problem. > > 07:19:16: GLib-GIO DEBUG : _g_io_module_get_default: Found default > implementation gvfs (GDaemonVfs) for ‘gio-vfs’ > 07:19:16: Geany INFO : Geany 1.37.1, en_US.UTF-8 > 07:19:16: Geany INFO : GTK 3.24.30, GLib 2.70.0 > 07:19:16: Geany INFO : OS: Manjaro Linux > 07:19:16: Geany INFO : System data dir: /usr/share/geany > 07:19:16: Geany INFO : User config dir: /home/xxxx/.config/geany > 07:19:16: Geany INFO : Loaded GTK+ CSS theme '/usr/share/geany/geany.css' > 07:19:16: Geany INFO : Loaded GTK+ CSS theme > '/usr/share/geany/geany-3.20.css' > 07:19:16: Geany INFO : System plugin path: /usr/lib/geany > 07:19:16: Geany INFO : Added filetype JSON (63). > 07:19:16: Geany INFO : Added filetype Graphviz (64). > 07:19:16: Geany INFO : Added filetype Nim (65). > 07:19:16: Geany INFO : Added filetype Swift (66). > 07:19:16: Geany INFO : Added filetype Clojure (67). > 07:19:16: Geany INFO : Added filetype Groovy (68). > 07:19:16: Geany INFO : Added filetype CUDA (69). > 07:19:16: Geany INFO : Added filetype Kotlin (70). > 07:19:16: Geany INFO : Added filetype Cython (71). > 07:19:16: Geany INFO : Added filetype TypeScript (72). > 07:19:16: Geany INFO : Added filetype Genie (73). > 07:19:16: Geany INFO : Added filetype Scala (74). > 07:19:16: Geany INFO : Added filetype Arduino (75). > 07:19:16: Geany INFO : Added filetype stf (76). > 07:19:16: Geany INFO : Added filetype txt (77). > 07:19:16: Geany INFO : Loaded libvte from libvte-2.91.so <http://libvte-2.91.so> > <http://libvte-2.91.so <http://libvte-2.91.so>> > 07:19:16: Geany INFO : Unknown filetype for file > '/home/xxxx/.config/geany/tags/stf.stf.tags'. > 07:19:16: Geany INFO : Unknown filetype for file > '/home/xxxx/.config/geany/tags/txt.txt.tags'. > 07:19:16: Geany INFO : /home/xxxx/Documents/n1.txt : txt (UTF-8) > 15:41:24: GLib-GIO DEBUG : _g_io_module_get_default: Found default > implementation dconf (DConfSettingsBackend) for ‘gsettings-backend’ > > Thanks > > On Sat, Oct 16, 2021 at 6:32 AM Enrico Tröger <enrico.troeger@uvena.de <mailto:enrico.troeger@uvena.de> > <mailto:enrico.troeger@uvena.de <mailto:enrico.troeger@uvena.de>>> wrote: > > There must be something else wrong. > > If I use the tags file and the custom filetype you provided here, I can > successfully load the tags: > 13:29:31.561147: Geany INFO : Loaded /tmp/test.txt.tags > (txt), 2 symbol(s). > > Maybe the whole output of Help->Debug Messages could give a hint. > > Regards, > Enrico > > > On 14.10.21 22:48, Rue Sixteen wrote: > > That is interesting. > > > > Below is $USER/.config/geany/filedefs/filetypes.txt.conf > > # For complete documentation of this file, please see Geany's main > > documentation > > [styling] > > # Edit these in the colorscheme .conf file instead > > default=default > > comment=comment > > tag=tag > > class=class > > pseudoclass=string_1 > > unknown_pseudoclass=default > > unknown_identifier=default > > operator=operator > > identifier=keyword_2 > > doublestring=string_1 > > singlestring=string_2 > > attribute=attribute > > value=value > > id=class > > identifier2=keyword_2 > > variable=identifier_1 > > important=error > > directive=preprocessor > > identifier3=keyword_1 > > pseudoelement=string_2 > > extended_identifier=keyword_1 > > extended_pseudoclass=string_1 > > extended_pseudoelement=string_2 > > media=parameter > > > > [keywords] > > > > [settings] > > # default extension used when saving files > > extension=txt > > tag_parser=COBOL > > # MIME type > > mime_type=text/plain > > > > > > [indentation] > > > > > > > > Thanks > > > > > > On Thu, Oct 14, 2021 at 3:31 PM Enrico Tröger > <enrico.troeger@uvena.de <mailto:enrico.troeger@uvena.de> <mailto:enrico.troeger@uvena.de <mailto:enrico.troeger@uvena.de>> > > <mailto:enrico.troeger@uvena.de <mailto:enrico.troeger@uvena.de> > <mailto:enrico.troeger@uvena.de <mailto:enrico.troeger@uvena.de>>>> wrote: > > > > > > I've created a custom filetype named "txt" and saved your > posted tags > > file and then I could load it successfully. > > > > So, I assume there is something wrong with your configuration. > > Could you post your filetype configuration for "txt"? > > > > Regards, > > Enrico > > > > > > On 14.10.21 22:09, Rue Sixteen wrote: > > > Hi Enrico > > > > > > I do. When I go to the tab I was hoping to get the tags to > > autocomplete, > > > Document > Set FileType shows txt checked. > > > > > > Thanks > > > > > > On Thu, Oct 14, 2021 at 3:02 PM Enrico Tröger > > <enrico.troeger@uvena.de <mailto:enrico.troeger@uvena.de> <mailto:enrico.troeger@uvena.de <mailto:enrico.troeger@uvena.de>> > <mailto:enrico.troeger@uvena.de <mailto:enrico.troeger@uvena.de> <mailto:enrico.troeger@uvena.de <mailto:enrico.troeger@uvena.de>>> > > > <mailto:enrico.troeger@uvena.de <mailto:enrico.troeger@uvena.de> > <mailto:enrico.troeger@uvena.de <mailto:enrico.troeger@uvena.de>> > > <mailto:enrico.troeger@uvena.de <mailto:enrico.troeger@uvena.de> > <mailto:enrico.troeger@uvena.de <mailto:enrico.troeger@uvena.de>>>>> wrote: > > > > > > Hi Rue, > > > > > > > I recently had to reinstall after an SSD death. However > > geany is not > > > > accepting my tag files. These are the same ones I > used for > > a long > > > time > > > > before. They are in pipe format. I tried loading > them from > > Tools > > > > Load > > > > Tags. > > > > In the status bar below, it says "Could not load > tags file > > > .....". In > > > > the debug message it says "Unknown filetype for > file ..." > > > > > > > > I created a simple file and called it > simple.txt.tags and > > it has the > > > > > > do you have any filetype configured with the > extensions ".txt"? > > > The filename part before ".tags", in your case "txt" > need to > > match a > > > known filetype for Geany. This filetype is used to > load the > > tags for as > > > tags are always bound to filetypes. > > > > > > > > > Regards, > > > Enrico > > > > > > -- > > > Get my GPG key from https://www.uvena.de/pub.asc <https://www.uvena.de/pub.asc> > <https://www.uvena.de/pub.asc <https://www.uvena.de/pub.asc>> > > <https://www.uvena.de/pub.asc <https://www.uvena.de/pub.asc> <https://www.uvena.de/pub.asc <https://www.uvena.de/pub.asc>>> > > > <https://www.uvena.de/pub.asc <https://www.uvena.de/pub.asc> > <https://www.uvena.de/pub.asc <https://www.uvena.de/pub.asc>> <https://www.uvena.de/pub.asc <https://www.uvena.de/pub.asc> > <https://www.uvena.de/pub.asc <https://www.uvena.de/pub.asc>>>> _______________________________________________ Users mailing list Users@lists.geany.org <mailto:Users@lists.geany.org> https://lists.geany.org/cgi-bin/mailman/listinfo/users <https://lists.geany.org/cgi-bin/mailman/listinfo/users>
I copied the config folder from the laptop where geany is working and replaced the one in desktop with that. Now desktop works as well. However I didn't save the old config so I can't check now. I think you are right, I don't recall seeing the extensions line!
Thanks
On Sat, Oct 23, 2021, 10:46 AM Enrico Tröger enrico.troeger@uvena.de wrote:
Just to get sure: in filetype_extensions.conf there exists the line [Extensions] and it is uncommented before "txt=*.txt;"? Otherwise it can't work.
If that doesn't help either, did you compare the Geany config folder on both machines for differences?
On 21.10.21 00:03, Rue Sixteen wrote:
Hi
I added that now. Still says unable to load tag file. filetype_extensions.conf says txt=*.txt; I removed everything else from it and only the line above exists. All other lines were commented out anyway before. Weird thing is geany works in my laptop but not desktop, both have same Manjaro with same config/setup!!
Thanks
Debug info below. 16:58:43: GLib-GIO DEBUG : _g_io_module_get_default: Found default implementation gvfs (GDaemonVfs) for ‘gio-vfs’ 16:58:43: Geany INFO : Geany 1.37.1, en_US.UTF-8 16:58:43: Geany INFO : GTK 3.24.30, GLib 2.70.0 16:58:43: Geany INFO : OS: Manjaro Linux 16:58:43: Geany INFO : System data dir: /usr/share/geany 16:58:43: Geany INFO : User config dir: /home/xxxx/.config/geany 16:58:43: Geany INFO : Loaded GTK+ CSS theme '/usr/share/geany/geany.css' 16:58:43: Geany INFO : Loaded GTK+ CSS theme '/usr/share/geany/geany-3.20.css' 16:58:43: Geany INFO : System plugin path: /usr/lib/geany 16:58:43: Geany INFO : Added filetype JSON (63). 16:58:43: Geany INFO : Added filetype Graphviz (64). 16:58:43: Geany INFO : Added filetype Nim (65). 16:58:43: Geany INFO : Added filetype Swift (66). 16:58:43: Geany INFO : Added filetype Clojure (67). 16:58:43: Geany INFO : Added filetype Groovy (68). 16:58:43: Geany INFO : Added filetype CUDA (69). 16:58:43: Geany INFO : Added filetype Kotlin (70). 16:58:43: Geany INFO : Added filetype Cython (71). 16:58:43: Geany INFO : Added filetype TypeScript (72). 16:58:43: Geany INFO : Added filetype Genie (73). 16:58:43: Geany INFO : Added filetype Scala (74). 16:58:43: Geany INFO : Added filetype Arduino (75). 16:58:43: Geany INFO : Added filetype stf (76). 16:58:43: Geany INFO : Added filetype txt (77). 16:58:43: Geany INFO : Loaded libvte from libvte-2.91.so http://libvte-2.91.so 16:58:43: Geany INFO : Unknown filetype for file '/home/xxxx/.config/geany/tags/stf.stf.tags'. 16:58:43: Geany INFO : Unknown filetype for file '/home/xxxx/.config/geany/tags/txt.txt.tags'. 16:58:44: Geany INFO : /home/xxxx/Documents/n1.txt : txt (UTF-8) 16:58:49: GLib-GIO DEBUG : _g_io_module_get_default: Found default implementation dconf (DConfSettingsBackend) for ‘gsettings-backend’
On Wed, Oct 20, 2021 at 4:48 PM Enrico Tröger <enrico.troeger@uvena.de mailto:enrico.troeger@uvena.de> wrote:
Ok, I think you are just missing an item for your custom filetypes in ~/.config/geany/filetype_extensions.conf like: txt=*.txt; in the [Extensions] section. Geany uses this mapping to associate tags files based on their extension to the configured filetypes. Regards, Enrico On 19.10.21 22:45, Rue Sixteen wrote: > Sorry for the late reply. Debug info below. > > I am trying to use the tags in txt.txt.tags to show up in n1.txt - which > is recognized as txt file but as txt [UTF-8]. I don't know whether that > is the problem. > > 07:19:16: GLib-GIO DEBUG : _g_io_module_get_default: Found default > implementation gvfs (GDaemonVfs) for ‘gio-vfs’ > 07:19:16: Geany INFO : Geany 1.37.1, en_US.UTF-8 > 07:19:16: Geany INFO : GTK 3.24.30, GLib 2.70.0 > 07:19:16: Geany INFO : OS: Manjaro Linux > 07:19:16: Geany INFO : System data dir: /usr/share/geany > 07:19:16: Geany INFO : User config dir: /home/xxxx/.config/geany > 07:19:16: Geany INFO : Loaded GTK+ CSS theme '/usr/share/geany/geany.css' > 07:19:16: Geany INFO : Loaded GTK+ CSS theme > '/usr/share/geany/geany-3.20.css' > 07:19:16: Geany INFO : System plugin path: /usr/lib/geany > 07:19:16: Geany INFO : Added filetype JSON (63). > 07:19:16: Geany INFO : Added filetype Graphviz (64). > 07:19:16: Geany INFO : Added filetype Nim (65). > 07:19:16: Geany INFO : Added filetype Swift (66). > 07:19:16: Geany INFO : Added filetype Clojure (67). > 07:19:16: Geany INFO : Added filetype Groovy (68). > 07:19:16: Geany INFO : Added filetype CUDA (69). > 07:19:16: Geany INFO : Added filetype Kotlin (70). > 07:19:16: Geany INFO : Added filetype Cython (71). > 07:19:16: Geany INFO : Added filetype TypeScript (72). > 07:19:16: Geany INFO : Added filetype Genie (73). > 07:19:16: Geany INFO : Added filetype Scala (74). > 07:19:16: Geany INFO : Added filetype Arduino (75). > 07:19:16: Geany INFO : Added filetype stf (76). > 07:19:16: Geany INFO : Added filetype txt (77). > 07:19:16: Geany INFO : Loaded libvte from libvte-2.91.so <http://libvte-2.91.so> > <http://libvte-2.91.so <http://libvte-2.91.so>> > 07:19:16: Geany INFO : Unknown filetype for file > '/home/xxxx/.config/geany/tags/stf.stf.tags'. > 07:19:16: Geany INFO : Unknown filetype for file > '/home/xxxx/.config/geany/tags/txt.txt.tags'. > 07:19:16: Geany INFO : /home/xxxx/Documents/n1.txt : txt (UTF-8) > 15:41:24: GLib-GIO DEBUG : _g_io_module_get_default: Found default > implementation dconf (DConfSettingsBackend) for‘gsettings-backend’
> > Thanks > > On Sat, Oct 16, 2021 at 6:32 AM Enrico Tröger <enrico.troeger@uvena.de <mailto:enrico.troeger@uvena.de> > <mailto:enrico.troeger@uvena.de <mailto:enrico.troeger@uvena.de>>> wrote: > > There must be something else wrong. > > If I use the tags file and the custom filetype you provided here, I can > successfully load the tags: > 13:29:31.561147: Geany INFO : Loaded /tmp/test.txt.tags > (txt), 2 symbol(s). > > Maybe the whole output of Help->Debug Messages could give ahint.
> > Regards, > Enrico > > > On 14.10.21 22:48, Rue Sixteen wrote: > > That is interesting. > > > > Below is $USER/.config/geany/filedefs/filetypes.txt.conf > > # For complete documentation of this file, please see Geany's main > > documentation > > [styling] > > # Edit these in the colorscheme .conf file instead > > default=default > > comment=comment > > tag=tag > > class=class > > pseudoclass=string_1 > > unknown_pseudoclass=default > > unknown_identifier=default > > operator=operator > > identifier=keyword_2 > > doublestring=string_1 > > singlestring=string_2 > > attribute=attribute > > value=value > > id=class > > identifier2=keyword_2 > > variable=identifier_1 > > important=error > > directive=preprocessor > > identifier3=keyword_1 > > pseudoelement=string_2 > > extended_identifier=keyword_1 > > extended_pseudoclass=string_1 > > extended_pseudoelement=string_2 > > media=parameter > > > > [keywords] > > > > [settings] > > # default extension used when saving files > > extension=txt > > tag_parser=COBOL > > # MIME type > > mime_type=text/plain > > > > > > [indentation] > > > > > > > > Thanks > > > > > > On Thu, Oct 14, 2021 at 3:31 PM Enrico Tröger > <enrico.troeger@uvena.de <mailto:enrico.troeger@uvena.de> <mailto:enrico.troeger@uvena.de <mailto:enrico.troeger@uvena.de>> > > <mailto:enrico.troeger@uvena.de <mailto:enrico.troeger@uvena.de> > <mailto:enrico.troeger@uvena.de <mailto:enrico.troeger@uvena.de>>>> wrote: > > > > > > I've created a custom filetype named "txt" and savedyour
> posted tags > > file and then I could load it successfully. > > > > So, I assume there is something wrong with your configuration. > > Could you post your filetype configuration for "txt"? > > > > Regards, > > Enrico > > > > > > On 14.10.21 22:09, Rue Sixteen wrote: > > > Hi Enrico > > > > > > I do. When I go to the tab I was hoping to get the tags to > > autocomplete, > > > Document > Set FileType shows txt checked. > > > > > > Thanks > > > > > > On Thu, Oct 14, 2021 at 3:02 PM Enrico Tröger > > <enrico.troeger@uvena.de <mailto:enrico.troeger@uvena.de> <mailto:enrico.troeger@uvena.de <mailto:enrico.troeger@uvena.de>> > <mailto:enrico.troeger@uvena.de <mailto:enrico.troeger@uvena.de> <mailto:enrico.troeger@uvena.de <mailto:enrico.troeger@uvena.de>>> > > > <mailto:enrico.troeger@uvena.de <mailto:enrico.troeger@uvena.de> > <mailto:enrico.troeger@uvena.de <mailto:enrico.troeger@uvena.de>>
> > <mailto:enrico.troeger@uvena.de <mailto:enrico.troeger@uvena.de> > <mailto:enrico.troeger@uvena.de <mailto:enrico.troeger@uvena.de>>>>> wrote: > > > > > > Hi Rue, > > > > > > > I recently had to reinstall after an SSD death. However > > geany is not > > > > accepting my tag files. These are the same ones I > used for > > a long > > > time > > > > before. They are in pipe format. I triedloading
> them from > > Tools > > > > Load > > > > Tags. > > > > In the status bar below, it says "Could notload
> tags file > > > .....". In > > > > the debug message it says "Unknown filetypefor
> file ..." > > > > > > > > I created a simple file and called it > simple.txt.tags and > > it has the > > > > > > do you have any filetype configured with the > extensions ".txt"? > > > The filename part before ".tags", in your case "txt" > need to > > match a > > > known filetype for Geany. This filetype is usedto
> load the > > tags for as > > > tags are always bound to filetypes. > > > > > > > > > Regards, > > > Enrico > > > > > > -- > > > Get my GPG key from https://www.uvena.de/pub.asc <https://www.uvena.de/pub.asc> > <https://www.uvena.de/pub.asc <https://www.uvena.de/pub.asc>> > > <https://www.uvena.de/pub.asc <https://www.uvena.de/pub.asc> <https://www.uvena.de/pub.asc <https://www.uvena.de/pub.asc>>> > > > <https://www.uvena.de/pub.asc <https://www.uvena.de/pub.asc> > <https://www.uvena.de/pub.asc <https://www.uvena.de/pub.asc>> <https://www.uvena.de/pub.asc <https://www.uvena.de/pub.asc> > <https://www.uvena.de/pub.asc <https://www.uvena.de/pub.asc_______________________________________________ Users mailing list Users@lists.geany.org <mailto:Users@lists.geany.org> https://lists.geany.org/cgi-bin/mailman/listinfo/users <https://lists.geany.org/cgi-bin/mailman/listinfo/users>
Users mailing list Users@lists.geany.org https://lists.geany.org/cgi-bin/mailman/listinfo/users