Hello everybody,
I've been happily using Geany for a little while now, coding mostly in
Python. I have a couple questions:
1. For a dark color scheme, eg Vibrant Ink, how do i get the active
line to not be highlighted. White text + white highlighting =
invisible text on the line I'm trying to edit. Arrgh!
2. Any debugger advice for python? I am finding winpdb is pretty slow
and actually crashes on my machine a fair amount.
I'm on a windows 7 64 bit installation.
Thanks!
--
A musician must make music, an artist must paint, a poet must write,
if he is to be ultimately at peace with himself.
- Abraham Maslow
Hi Lex,
Sorry for my late reply -- I just turned on Digest mode so it took a
while to see your message.
1. I have Geany 1.23, Ubuntu 12.04. Yes, my file is .py
I went into Geany and did these extra things: Turn off "Tab key indents"
in Indentation, Turn on "Snippet completion" in Completions.
Still, when I hit a tab key, it just inserts white spaces (sometimes 1,
sometimes 4/tab).
2. What's the best way to raise interest in a feature like Code minimap?
I looked at the Feature Request page on SourceForge and they seem to
request mainly support for miscellaneous language. Whereas some of the
slick Sublime-like features (minimap, multiple cursors, put both quotes
around a highlighted word) would seem to be universally appealing.
Thanks, - Anh
> Hi all, I recently stumbled upon Sublime Text 2 and was pretty
> impressed with its Snippet completion and Code minimap. I'm delighted
> to find out that Geany has snippet as well, but hitting Tab (my
> snippet completion keybinding) does not do anything for me... I did
> reload configuration + close/restart Geany From my snippets.conf
>> # Optional keybindings to insert snippets
>> # Note: these can be overridden by Geany's configurable keybindings
>> [Keybindings]
>> #for=<Ctrl>7
> There is also the appropriate section for Python snippets
>> [Python]
>> for=for i in xrange(%cursor%):\n\t
>> if=if %cursor%:\n\t
>> elif=elif %cursor%:\n\t
>> else=else:\n\t
>> while=while %cursor%:\n\t
>> try=try:\n\t%cursor%\nexcept Exception, ex:\n\t
>> with=with %cursor%:\n\t
>> def=def %cursor% (%cursor%):\n\t""" Function doc """\n\t
>> class=class %cursor%:\n\t""" Class doc """\n\t\n\tdef __init__
>> (self):\n\t\t""" Class initialiser """\n\t\tpass
> The second issue is that I'm wondering if there's code minimap planned
> for Geany? I'm surprised that Google only turns up one such request.
>
> Thank you all,
> Best regards,
> - Anh
>
>
> ------------------------------
>
> Message: 2
> Date: Sun, 1 Dec 2013 13:01:58 +1100
> From: Lex Trotman <elextr(a)gmail.com>
> To: Geany general discussion list <users(a)lists.geany.org>
> Subject: Re: [Geany-Users] Snippet completion not working + is code
> minimap planned?
> Message-ID:
> <CAKhWKDNddqYwBybv3FawZWmKUUtq4H-mO0hyO83ogE0vJrfrpw(a)mail.gmail.com>
> Content-Type: text/plain; charset="iso-8859-1"
>
> On 1 December 2013 11:43, Anh <ale(a)colgate.edu> wrote:
>
>> Hi all,
>>
>> I recently stumbled upon Sublime Text 2 and was pretty impressed with its
>> Snippet completion and Code minimap.
>>
>> I'm delighted to find out that Geany has snippet as well, but hitting Tab
>> (my snippet completion keybinding) does not do anything for me... I did
>> reload configuration + close/restart Geany
>>
> What version of Geany? What operating system? So you type for<tab> and
> nothing happens? Is the window you are in a Python filetype?
>
>
>> From my snippets.conf
>>
>>> # Optional keybindings to insert snippets
>>> # Note: these can be overridden by Geany's configurable keybindings
>>> [Keybindings]
>>> #for=<Ctrl>7
>>>
>> There is also the appropriate section for Python snippets
>>
>>> [Python]
>>> for=for i in xrange(%cursor%):\n\t
>>> if=if %cursor%:\n\t
>>> elif=elif %cursor%:\n\t
>>> else=else:\n\t
>>> while=while %cursor%:\n\t
>>> try=try:\n\t%cursor%\nexcept Exception, ex:\n\t
>>> with=with %cursor%:\n\t
>>> def=def %cursor% (%cursor%):\n\t""" Function doc """\n\t
>>> class=class %cursor%:\n\t""" Class doc """\n\t\n\tdef __init__
>>> (self):\n\t\t""" Class initialiser """\n\t\tpass
>>>
>> The second issue is that I'm wondering if there's code minimap planned for
>> Geany? I'm surprised that Google only turns up one such request.
>>
> No, its not planned. Its probably implementable as a plugin if somebody
> wants to do it.
>
> Cheers
> Lex
>
>
>> Thank you all,
>> Best regards,
>> - Anh
>> _______________________________________________
>> Users mailing list
>> Users(a)lists.geany.org
>> https://lists.geany.org/cgi-bin/mailman/listinfo/users
>>
>>
Hello Geany users,
I have just installed Geany on Ubuntu and when I open the preferences I
have tab General, Interface, ..., Various but after Various* I do not have
the Terminal tab (see image below)*, which is what I wanted to access to
paste and copy commands to the terminal to execute small pieces of code.
Have I made a mistake in installing geany (i used on the command line: sudo
apt-get install geany)
Thank you very much for help.
Best regards,
marco
[image: Inline image 1]
Hi,
one of the hard disks in the server where geany.org is hosted recently
showed up some errors and so we will change the disk against a new one
just to be prevent a complete failure in advance.
This maintenance is planned for upcoming Saturday, May 03 2014.
Therefore the server and its services will be down for a
short period of time.
The following services will be affected:
- all mailing lists
- websites *.geany.org (except plugins.geany.org)
- Updatechecker plugin
Maintenance period:
Saturday, May 03 2014
11:30 - 15:00 UTC
I'll report back here once all is done and up running again.
Regards,
Enrico
--
Get my GPG key from http://www.uvena.de/pub.asc
Lately, I installed all the different plugins for Geany 1.24, and now
when I click on the Build menu item there are only the default build
commands, but if I click "Set Build Commands" it shows my custom build
commands, are there any known issues with this? Maybe with a certain
plugin? I've tried disabling all the plugins and it still happens.
In the meantime all I can do is use the built in terminal window.
hi,
i would like use geany for write as openoffice but without text
formating.
i can't arrive to auto return when i arrive to the end of the A4 page.
how can spécify to geany to use A4 automatique ligne return ?
regard,
major.
Hello...
How to close console window automaticaly (after run command) if
errorcode is 0?
Ie I like to close it if all thing is ok, but leave it opened if some
error ocours.
I tried to use VTE but is not practical for my need.
(even closing console window at program end is better as I can wait
keypres on error in my program.)
thanks
Slavko.
Shortly after 1.24, we release 1.24.1 which fixes missing inclusion of
two files in the release tarball, resulting in various small UI issues
(see bugs #1037 [1] and #1038 [2]). We are sorry for this inconvenience.
Note that only distribution tarballs are affected, neither the Windows
installer nor the installations performed from Git clones are.
As usual, all downloads can be found on http://download.geany.org/.
- Colomban
[1] https://sourceforge.net/p/geany/bugs/1037/
[2] https://sourceforge.net/p/geany/bugs/1038/
Geany-Plugins 1.24 released!
We are happy to announce a new version of the combined Geany-Plugins
release -- right after Geany 1.24 has been released.
There have been a lot of changes, so here are the probably most
prominent ones:
* New plugin Pohelper
* New plugin PairTagHighlighter
* New plugin Autoclose
* New plugin Geanypy (Python bindings)
* New plugin Defineformat
* Experimental support of Gtk3 on many of the plugins
Of course a lot of minor and bigger improvements have been done also on
existing plugins too. Here are some examples:
* GeanyVC: Support of Subversion 1.7
* TreeBrowser: Directly open newly created files
A more complete list of changes can be found in the NEWS file[¹].
You can download the new release at [²]
Cheers,
Frank
[¹] https://raw.githubusercontent.com/geany/geany-plugins/1.24.0/NEWS
[²] http://plugins.geany.org/downloads.html
After a long delay, we are finally happy to announce a new release of Geany!
For a comprehensive list of changes please see:
http://www.geany.org/Documentation/ReleaseNotes
Some highlights:
* Fix spawning commands with spaces on Windows.
* Fix infinite pagination when printing on Windows.
* Fix bulk Search & Replace not to match replacements.
* Update Scintilla to 3.3.6.
* Add experimental GTK3 support.
* Lots of improvements to PHP and Fortran symbols parsing.
* Add filetypes Clojure, CUDA, Batch, Graphviz, PowerShell and Rust.
* Update translations: ca, cs, de, es, eu, fr, gl, he, hu, it, kk, lt,
nl, pt, ru, sk, sl, sv, tr, zh_CN, zh_TW.
We want to thank all developers, translators and everyone who
contributed to this release with patches, feedback, bug reports and so
on. Thank you!
As usual, all downloads can be found on http://download.geany.org/.
- Colomban