Many Thanks to Tony for his quick and accurate answer to my questions. I found the saveactions.conf file. Just what I was trying to locate.
As to the question regarding the Geany version I submit this information. I have a total of 4 PI=4's all of which are running this file: 2021-05-07-raspios-buster-armhf-full.zip I believe that this is the latest available.
I realize that this is a Geany support forum and that this subject is really out-of-bounds. I, also, know that probably there is some additional things that the Raspberry people do to Insert the Geany editor into the PI images. But, is there a way for a novice at this type editing to replace the version 1.33 code with the 1.38 code? Like, maybe, on the microSD card image before it is installed on the PI.
Thanks again Bob
Robert L. Miers, PE Chino Valley, AZ 86323-5743 Bob: rlmierspe@blmiers.com Registered Professional Engineer Amateur Radio Operator KØWHF
Confidentiality Notice: This e-mail message, including any attachments, is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies of the original message.
-----Original Message----- From: Users users-bounces@lists.geany.org On Behalf Of users-request@lists.geany.org Sent: Wednesday, October 27, 2021 2:08 PM To: users@lists.geany.org Subject: Users Digest, Vol 190, Issue 14
Send Users mailing list submissions to users@lists.geany.org
To subscribe or unsubscribe via the World Wide Web, visit https://lists.geany.org/cgi-bin/mailman/listinfo/users or, via email, send a message with subject or body 'help' to users-request@lists.geany.org
You can reach the person managing the list at users-owner@lists.geany.org
When replying, please edit your Subject line so it is more specific than "Re: Contents of Users digest..."
You have limited options on Pi OS (Buster) in my view:
(1) Find a repository that has the latest version for ARM (ask on Pi forums?), add it to /etc/apt/sources.list or an entry in /etc/apt/sources.list.d, then do sudo apt update, then search for 'geany', then sudo apt install geany (the package might contain the version number, but not usually in my experience)
(2) Clone the GitHub repo and follow the instructions (https://github.com/geany/geany#installation-from-sources). It's not usually as scary as some think, just need all the bits of the 'jigsaw' and good instructions :)
(3) Wait until a later version makes its way into mainstream Pi OS (if you are staying on Buster, this might be never)
(4) Upgrade Pi Os to Debian Bullseye, where I think the latest Geany is 1.37.x
(5) Burn an SD with Manjaro MATE which I'm pretty sure has 1.38, try Geany and see if the upgrade matters enough to you to keep hunting the later version down for vanilla Pi OS, and/or change distro
If this conversation is too 'Pi' and not enough 'Geany' for the List, moderator do let me know and me/Bob can have a private conversation elsewhere :)
Tony
Sent with ProtonMail Secure Email.
‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
On Wednesday, October 27th, 2021 at 23:20, rlmierspe@blmiers.com wrote:
Many Thanks to Tony for his quick and accurate answer to my questions.
I found the saveactions.conf file. Just what I was trying to locate.
As to the question regarding the Geany version I submit this information.
I have a total of 4 PI=4's all of which are running this file:
2021-05-07-raspios-buster-armhf-full.zip
I believe that this is the latest available.
I realize that this is a Geany support forum and that this subject is really
out-of-bounds.
I, also, know that probably there is some additional things that the
Raspberry people do to
Insert the Geany editor into the PI images.
But, is there a way for a novice at this type editing to replace the version
1.33 code with the 1.38 code?
Like, maybe, on the microSD card image before it is installed on the PI.
Thanks again
Bob
Robert L. Miers, PE
Chino Valley, AZ 86323-5743
Bob: rlmierspe@blmiers.com
Registered Professional Engineer
Amateur Radio Operator KØWHF
Confidentiality Notice: This e-mail message, including any attachments, is
for the sole use of the intended recipient(s) and may contain confidential
and privileged information. Any unauthorized review, use, disclosure or
distribution is prohibited. If you are not the intended recipient, please
contact the sender by reply e-mail and destroy all copies of the original
message.
-----Original Message-----
From: Users users-bounces@lists.geany.org On Behalf Of
users-request@lists.geany.org
Sent: Wednesday, October 27, 2021 2:08 PM
To: users@lists.geany.org
Subject: Users Digest, Vol 190, Issue 14
Send Users mailing list submissions to
users@lists.geany.org
To subscribe or unsubscribe via the World Wide Web, visit
https://lists.geany.org/cgi-bin/mailman/listinfo/users
or, via email, send a message with subject or body 'help' to
users-request@lists.geany.org
You can reach the person managing the list at
users-owner@lists.geany.org
When replying, please edit your Subject line so it is more specific than
"Re: Contents of Users digest..."
This email has been checked for viruses by AVG.
Users mailing list
Users@lists.geany.org