Commits October 2021

commits@lists.geany.org

1 participants
51 discussions

[geany/geany-osx] 5a19ab: Remove extra 's' in sleep command
by Jiří Techet 31 Oct '21

31 Oct '21

Branch: refs/heads/master Author: Jiří Techet <techet(a)gmail.com> Committer: Jiří Techet <techet(a)gmail.com> Date: Sat, 30 Oct 2021 19:27:22 UTC Commit: 5a19ab4a2220b0c9441c97288579b6ede53fef39 https://github.com/geany/geany-osx/commit/5a19ab4a2220b0c9441c97288579b6ede… Log Message: ----------- Remove extra 's' in sleep command Modified Paths: -------------- notarize.sh Modified: notarize.sh 2 lines changed, 1 insertions(+), 1 deletions(-) =================================================================== @@ -21,7 +21,7 @@ REQUESTUUID=$(sed -n 's/RequestUUID = $.*$/\1/p' ${TMPDIR}notarize_output); echo "Disk image has been uploaded. Request UUID is ${REQUESTUUID}. Checking status every 10 seconds:"; STATUS="in progress"; while [ "${STATUS}" = "in progress" ]; do - sleep 10s; + sleep 10; xcrun altool --notarization-info "${REQUESTUUID}" -u "${APPLEID}" -p "${PASSWORD}" > ${TMPDIR}notarize_output 2>&1 || { cat ${TMPDIR}notarize_output; rm -f ${TMPDIR}notarize_output; echo "Failed to check on notarization status."; exit $?; }; STATUS=$(sed -ne 's/^[[:space:]]*Status: $.*$$/\1/p' ${TMPDIR}notarize_output); echo "Status: ${STATUS}" -------------- This E-Mail was brought to you by github_commit_mail.py (Source: https://github.com/geany/infrastructure).

1 0

[geany/geany] 9c76f7: Upgrade Doxyfile.in removing deprecated options
by Frank Lanitz 30 Oct '21

30 Oct '21

Branch: refs/heads/Update-doxygen-configuration Author: Frank Lanitz <frank(a)frank.uvena.de> Committer: Frank Lanitz <frank(a)frank.uvena.de> Date: Sat, 30 Oct 2021 11:28:04 UTC Commit: 9c76f78cc5fbad410b285968e6766bf1652f5376 https://github.com/geany/geany/commit/9c76f78cc5fbad410b285968e6766bf1652f5… Log Message: ----------- Upgrade Doxyfile.in removing deprecated options Modified Paths: -------------- doc/Doxyfile.in Modified: doc/Doxyfile.in 736 lines changed, 503 insertions(+), 233 deletions(-) =================================================================== @@ -1,4 +1,4 @@ -# Doxyfile 1.8.8 +# Doxyfile 1.9.1 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -17,11 +17,11 @@ # Project related configuration options #--------------------------------------------------------------------------- -# This tag specifies the encoding used for all characters in the config file -# that follow. The default is UTF-8 which is also the encoding used for all text -# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv -# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv -# for the list of possible encodings. +# This tag specifies the encoding used for all characters in the configuration +# file that follow. The default is UTF-8 which is also the encoding used for all +# text before the first occurrence of this tag. Doxygen uses libiconv (or the +# iconv built into libc) for the transcoding. See +# https://www.gnu.org/software/libiconv/ for the list of possible encodings. # The default value is: UTF-8. DOXYFILE_ENCODING = UTF-8 @@ -46,10 +46,10 @@ PROJECT_NUMBER = @VERSION@ PROJECT_BRIEF = -# With the PROJECT_LOGO tag one can specify an logo or icon that is included in -# the documentation. The maximum height of the logo should not exceed 55 pixels -# and the maximum width should not exceed 200 pixels. Doxygen will copy the logo -# to the output directory. +# With the PROJECT_LOGO tag one can specify a logo or an icon that is included +# in the documentation. The maximum height of the logo should not exceed 55 +# pixels and the maximum width should not exceed 200 pixels. Doxygen will copy +# the logo to the output directory. PROJECT_LOGO = @@ -60,7 +60,7 @@ PROJECT_LOGO = OUTPUT_DIRECTORY = @top_builddir@/doc -# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create 4096 sub- +# If the CREATE_SUBDIRS tag is set to YES then doxygen will create 4096 sub- # directories (in 2 levels) under the output directory of each output format and # will distribute the generated files over these directories. Enabling this # option can be useful when feeding doxygen a huge amount of source files, where @@ -93,14 +93,22 @@ ALLOW_UNICODE_NAMES = NO OUTPUT_LANGUAGE = English -# If the BRIEF_MEMBER_DESC tag is set to YES doxygen will include brief member +# The OUTPUT_TEXT_DIRECTION tag is used to specify the direction in which all +# documentation generated by doxygen is written. Doxygen will use this +# information to generate all generated output in the proper direction. +# Possible values are: None, LTR, RTL and Context. +# The default value is: None. + +OUTPUT_TEXT_DIRECTION = None + +# If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member # descriptions after the members that are listed in the file and class # documentation (similar to Javadoc). Set to NO to disable this. # The default value is: YES. BRIEF_MEMBER_DESC = YES -# If the REPEAT_BRIEF tag is set to YES doxygen will prepend the brief +# If the REPEAT_BRIEF tag is set to YES, doxygen will prepend the brief # description of a member or function before the detailed description # # Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the @@ -118,9 +126,9 @@ REPEAT_BRIEF = YES # the entity):The $name class, The $name widget, The $name file, is, provides, # specifies, contains, represents, a, an and the. -ABBREVIATE_BRIEF = "The $name class " \ - "The $name widget " \ - "The $name file " \ +ABBREVIATE_BRIEF = "The $name class" \ + "The $name widget" \ + "The $name file" \ is \ provides \ specifies \ @@ -145,7 +153,7 @@ ALWAYS_DETAILED_SEC = NO INLINE_INHERITED_MEMB = NO -# If the FULL_PATH_NAMES tag is set to YES doxygen will prepend the full path +# If the FULL_PATH_NAMES tag is set to YES, doxygen will prepend the full path # before files name in the file list and in the header files. If set to NO the # shortest path that makes the file name unique will be used # The default value is: YES. @@ -189,6 +197,16 @@ SHORT_NAMES = NO JAVADOC_AUTOBRIEF = YES +# If the JAVADOC_BANNER tag is set to YES then doxygen will interpret a line +# such as +# /*************** +# as being the beginning of a Javadoc-style comment "banner". If set to NO, the +# Javadoc-style will behave just like regular comments and it will not be +# interpreted by doxygen. +# The default value is: NO. + +JAVADOC_BANNER = NO + # If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first # line (until the first dot) of a Qt-style comment as the brief description. If # set to NO, the Qt-style will behave just like regular Qt-style comments (thus @@ -209,15 +227,23 @@ QT_AUTOBRIEF = NO MULTILINE_CPP_IS_BRIEF = NO +# By default Python docstrings are displayed as preformatted text and doxygen's +# special commands cannot be used. By setting PYTHON_DOCSTRING to NO the +# doxygen's special commands can be used and the contents of the docstring +# documentation blocks is shown as doxygen documentation. +# The default value is: YES. + +PYTHON_DOCSTRING = YES + # If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the # documentation from any documented member that it re-implements. # The default value is: YES. INHERIT_DOCS = YES -# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce a -# new page for each member. If set to NO, the documentation of a member will be -# part of the file/class/namespace that contains it. +# If the SEPARATE_MEMBER_PAGES tag is set to YES then doxygen will produce a new +# page for each member. If set to NO, the documentation of a member will be part +# of the file/class/namespace that contains it. # The default value is: NO. SEPARATE_MEMBER_PAGES = NO @@ -236,35 +262,37 @@ TAB_SIZE = 4 # will allow you to put the command \sideeffect (or @sideeffect) in the # documentation, which will result in a user-defined paragraph with heading # "Side Effects:". You can put \n's in the value part of an alias to insert -# newlines. +# newlines (in the resulting output). You can put ^^ in the value part of an +# alias to insert a newline as if a physical newline was in the original file. +# When you need a literal { or } or , in the value part of an alias you have to +# escape them by means of a backslash (\), this can lead to conflicts with the +# commands \{ and \} for these it is advised to use the version @{ and @} or use +# a double escape (\\{ and \\}) ## ALIASES taken from pidgin -ALIASES = "signal=- @ref " \ - "signaldef=@subsection " \ - "endsignaldef= " \ - "signalproto=@code " \ - "endsignalproto=@endcode " \ - "signaldesc=" \ - "signals=@b Signals: " \ - "endsignals= " \ - "gironly=@internal" - -# Apparently Doxygen doesn't seem to like \<type>only without a previous command, so create a no-op -ALIASES += "noop=\if FALSE \endif" -ALIASES += "transfer{1}=\noop \xmlonly <simplesect kind=\"geany:transfer\">\1</simplesect>\endxmlonly \htmlonly (transfer: \1) \endhtmlonly" -ALIASES += "elementtype{1}=\noop \xmlonly <simplesect kind=\"geany:element-type\">\1</simplesect>\endxmlonly \htmlonly (element-type: \1) \endhtmlonly" -ALIASES += "scope{1}=\noop \xmlonly <simplesect kind=\"geany:scope\">\1</simplesect>\endxmlonly \htmlonly (scope: \1) \endhtmlonly" -ALIASES += "girskip=\noop \xmlonly <simplesect kind=\"geany:skip\"></simplesect>\endxmlonly" -ALIASES += "nullable=\noop \xmlonly <simplesect kind=\"geany:nullable\"></simplesect>\endxmlonly" -ALIASES += "out=\noop \xmlonly <simplesect kind=\"geany:out\"></simplesect>\endxmlonly \htmlonly (out) \endhtmlonly" -ALIASES += "optional=\noop \xmlonly <simplesect kind=\"geany:optional\"></simplesect>\endxmlonly" -ALIASES += "cb=\noop \xmlonly <simplesect kind=\"geany:scope\">notified</simplesect>\endxmlonly" -ALIASES += "cbdata=\noop \xmlonly <simplesect kind=\"geany:closure\"></simplesect>\endxmlonly" -ALIASES += "cbfree=\noop \xmlonly <simplesect kind=\"geany:destroy\"></simplesect>\endxmlonly" -ALIASES += "array=\noop \xmlonly <simplesect kind=\"geany:array\"></simplesect>\endxmlonly" -ALIASES += "array{1}=\noop \xmlonly <simplesect kind=\"geany:array\">\1</simplesect>\endxmlonly" - +ALIASES = "signal=- @ref " \ + "signaldef=@subsection " \ + "endsignaldef= " \ + "signalproto=@code " \ + "endsignalproto=@endcode " \ + signaldesc= \ + "signals=@b Signals: " \ + "endsignals= " \ + gironly=@internal \ + "noop=\if FALSE \endif" \ + "transfer{1}=\noop \xmlonly <simplesect kind=\"geany:transfer\">\1</simplesect>\endxmlonly \htmlonly (transfer: \1) \endhtmlonly" \ + "elementtype{1}=\noop \xmlonly <simplesect kind=\"geany:element-type\">\1</simplesect>\endxmlonly \htmlonly (element-type: \1) \endhtmlonly" \ + "scope{1}=\noop \xmlonly <simplesect kind=\"geany:scope\">\1</simplesect>\endxmlonly \htmlonly (scope: \1) \endhtmlonly" \ + "girskip=\noop \xmlonly <simplesect kind=\"geany:skip\"></simplesect>\endxmlonly" \ + "nullable=\noop \xmlonly <simplesect kind=\"geany:nullable\"></simplesect>\endxmlonly" \ + "out=\noop \xmlonly <simplesect kind=\"geany:out\"></simplesect>\endxmlonly \htmlonly (out) \endhtmlonly" \ + "optional=\noop \xmlonly <simplesect kind=\"geany:optional\"></simplesect>\endxmlonly" \ + "cb=\noop \xmlonly <simplesect kind=\"geany:scope\">notified</simplesect>\endxmlonly" \ + "cbdata=\noop \xmlonly <simplesect kind=\"geany:closure\"></simplesect>\endxmlonly" \ + "cbfree=\noop \xmlonly <simplesect kind=\"geany:destroy\"></simplesect>\endxmlonly" \ + "array=\noop \xmlonly <simplesect kind=\"geany:array\"></simplesect>\endxmlonly" \ + "array{1}=\noop \xmlonly <simplesect kind=\"geany:array\">\1</simplesect>\endxmlonly" # Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources # only. Doxygen will then generate output that is more tailored for C. For @@ -294,39 +322,60 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO +# Set the OPTIMIZE_OUTPUT_SLICE tag to YES if your project consists of Slice +# sources only. Doxygen will then generate output that is more tailored for that +# language. For instance, namespaces will be presented as modules, types will be +# separated into more groups, etc. +# The default value is: NO. + +OPTIMIZE_OUTPUT_SLICE = NO + # Doxygen selects the parser to use depending on the extension of the files it # parses. With this tag you can assign which parser to use for a given # extension. Doxygen has a built-in mapping, but you can override or extend it # using this tag. The format is ext=language, where ext is a file extension, and -# language is one of the parsers supported by doxygen: IDL, Java, Javascript, -# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran: -# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran: -# Fortran. In the later case the parser tries to guess whether the code is fixed -# or free formatted code, this is the default for Fortran type files), VHDL. For -# instance to make doxygen treat .inc files as Fortran files (default is PHP), -# and .f files as C (default is Fortran), use: inc=Fortran f=C. +# language is one of the parsers supported by doxygen: IDL, Java, JavaScript, +# Csharp (C#), C, C++, D, PHP, md (Markdown), Objective-C, Python, Slice, VHDL, +# Fortran (fixed format Fortran: FortranFixed, free formatted Fortran: +# FortranFree, unknown formatted Fortran: Fortran. In the later case the parser +# tries to guess whether the code is fixed or free formatted code, this is the +# default for Fortran type files). For instance to make doxygen treat .inc files +# as Fortran files (default is PHP), and .f files as C (default is Fortran), +# use: inc=Fortran f=C. # -# Note For files without extension you can use no_extension as a placeholder. +# Note: For files without extension you can use no_extension as a placeholder. # # Note that for custom extensions you also need to set FILE_PATTERNS otherwise -# the files are not read by doxygen. +# the files are not read by doxygen. When specifying no_extension you should add +# * to the FILE_PATTERNS. +# +# Note see also the list of default file extension mappings. EXTENSION_MAPPING = # If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments # according to the Markdown format, which allows for more readable -# documentation. See http://daringfireball.net/projects/markdown/ for details. +# documentation. See https://daringfireball.net/projects/markdown/ for details. # The output of markdown processing is further processed by doxygen, so you can # mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in # case of backward compatibilities issues. # The default value is: YES. MARKDOWN_SUPPORT = YES +# When the TOC_INCLUDE_HEADINGS tag is set to a non-zero value, all headings up +# to that level are automatically included in the table of contents, even if +# they do not have an id attribute. +# Note: This feature currently applies only to Markdown headings. +# Minimum value: 0, maximum value: 99, default value: 5. +# This tag requires that the tag MARKDOWN_SUPPORT is set to YES. + +TOC_INCLUDE_HEADINGS = 5 + # When enabled doxygen tries to link words that correspond to documented # classes, or namespaces to their corresponding documentation. Such a link can -# be prevented in individual cases by by putting a % sign in front of the word -# or globally by setting AUTOLINK_SUPPORT to NO. +# be prevented in individual cases by putting a % sign in front of the word or +# globally by setting AUTOLINK_SUPPORT to NO. # The default value is: YES. AUTOLINK_SUPPORT = YES @@ -348,7 +397,7 @@ BUILTIN_STL_SUPPORT = NO CPP_CLI_SUPPORT = NO # Set the SIP_SUPPORT tag to YES if your project consists of sip (see: -# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen +# https://www.riverbankcomputing.com/software/sip/intro) sources only. Doxygen # will parse them like normal C++ but will assume all classes use public instead # of private inheritance when no explicit protection keyword is present. # The default value is: NO. @@ -366,13 +415,20 @@ SIP_SUPPORT = NO IDL_PROPERTY_SUPPORT = YES # If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC -# tag is set to YES, then doxygen will reuse the documentation of the first +# tag is set to YES then doxygen will reuse the documentation of the first # member in the group (if any) for the other members of the group. By default # all members of a group must be documented explicitly. # The default value is: NO. DISTRIBUTE_GROUP_DOC = NO +# If one adds a struct or class to a group and this option is enabled, then also +# any nested class or struct is added to the same group. By default this option +# is disabled and one has to add nested compounds explicitly via \ingroup. +# The default value is: NO. + +GROUP_NESTED_COMPOUNDS = NO + # Set the SUBGROUPING tag to YES to allow class member groups of the same type # (for instance a group of public functions) to be put as a subgroup of that # type (e.g. under the Public Functions section). Set it to NO to prevent @@ -427,11 +483,24 @@ TYPEDEF_HIDES_STRUCT = NO LOOKUP_CACHE_SIZE = 0 +# The NUM_PROC_THREADS specifies the number threads doxygen is allowed to use +# during processing. When set to 0 doxygen will based this on the number of +# cores available in the system. You can set it explicitly to a value larger +# than 0 to get more control over the balance between CPU load and processing +# speed. At this moment only the input processing can be done using multiple +# threads. Since this is still an experimental feature the default is set to 1, +# which efficively disables parallel processing. Please report any issues you +# encounter. Generating dot graphs in parallel is controlled by the +# DOT_NUM_THREADS setting. +# Minimum value: 0, maximum value: 32, default value: 1. + +NUM_PROC_THREADS = 1 + #--------------------------------------------------------------------------- # Build related configuration options #--------------------------------------------------------------------------- -# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in +# If the EXTRACT_ALL tag is set to YES, doxygen will assume all entities in # documentation are documented, even if no documentation was available. Private # class members and static file members will be hidden unless the # EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES. @@ -441,35 +510,41 @@ LOOKUP_CACHE_SIZE = 0 EXTRACT_ALL = NO -# If the EXTRACT_PRIVATE tag is set to YES all private members of a class will +# If the EXTRACT_PRIVATE tag is set to YES, all private members of a class will # be included in the documentation. # The default value is: NO. EXTRACT_PRIVATE = NO -# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal +# If the EXTRACT_PRIV_VIRTUAL tag is set to YES, documented private virtual +# methods of a class will be included in the documentation. +# The default value is: NO. + +EXTRACT_PRIV_VIRTUAL = NO + +# If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal # scope will be included in the documentation. # The default value is: NO. EXTRACT_PACKAGE = NO -# If the EXTRACT_STATIC tag is set to YES all static members of a file will be +# If the EXTRACT_STATIC tag is set to YES, all static members of a file will be # included in the documentation. # The default value is: NO. EXTRACT_STATIC = NO -# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) defined -# locally in source files will be included in the documentation. If set to NO +# If the EXTRACT_LOCAL_CLASSES tag is set to YES, classes (and structs) defined +# locally in source files will be included in the documentation. If set to NO, # only classes defined in header files are included. Does not have any effect # for Java sources. # The default value is: YES. EXTRACT_LOCAL_CLASSES = YES -# This flag is only useful for Objective-C code. When set to YES local methods, +# This flag is only useful for Objective-C code. If set to YES, local methods, # which are defined in the implementation section but not in the interface are -# included in the documentation. If set to NO only methods in the interface are +# included in the documentation. If set to NO, only methods in the interface are # included. # The default value is: NO. @@ -484,6 +559,13 @@ EXTRACT_LOCAL_METHODS = NO EXTRACT_ANON_NSPACES = NO +# If this flag is set to YES, the name of an unnamed parameter in a declaration +# will be determined by the corresponding definition. By default unnamed +# parameters remain unnamed in the output. +# The default value is: YES. + +RESOLVE_UNNAMED_PARAMS = YES + # If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all # undocumented members inside documented classes or files. If set to NO these # members will be included in the various overviews, but no documentation @@ -494,21 +576,21 @@ HIDE_UNDOC_MEMBERS = YES # If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all # undocumented classes that are normally visible in the class hierarchy. If set -# to NO these classes will be included in the various overviews. This option has -# no effect if EXTRACT_ALL is enabled. +# to NO, these classes will be included in the various overviews. This option +# has no effect if EXTRACT_ALL is enabled. # The default value is: NO. HIDE_UNDOC_CLASSES = YES # If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend -# (class|struct|union) declarations. If set to NO these declarations will be -# included in the documentation. +# declarations. If set to NO, these declarations will be included in the +# documentation. # The default value is: NO. HIDE_FRIEND_COMPOUNDS = NO # If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any -# documentation blocks found inside the body of a function. If set to NO these +# documentation blocks found inside the body of a function. If set to NO, these # blocks will be appended to the function's detailed documentation block. # The default value is: NO. @@ -521,22 +603,36 @@ HIDE_IN_BODY_DOCS = YES INTERNAL_DOCS = NO -# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file -# names in lower-case letters. If set to YES upper-case letters are also -# allowed. This is useful if you have classes or files whose names only differ -# in case and if your file system supports case sensitive file names. Windows -# and Mac users are advised to set this option to NO. +# With the correct setting of option CASE_SENSE_NAMES doxygen will better be +# able to match the capabilities of the underlying filesystem. In case the +# filesystem is case sensitive (i.e. it supports files in the same directory +# whose names only differ in casing), the option must be set to YES to properly +# deal with such files in case they appear in the input. For filesystems that +# are not case sensitive the option should be be set to NO to properly deal with +# output files written for symbols that only differ in casing, such as for two +# classes, one named CLASS and the other named Class, and to also support +# references to files without having to specify the exact matching casing. On +# Windows (including Cygwin) and MacOS, users should typically set this option +# to NO, whereas on Linux or other Unix flavors it should typically be set to +# YES. # The default value is: system dependent. CASE_SENSE_NAMES = YES # If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with -# their full class and namespace scopes in the documentation. If set to YES the +# their full class and namespace scopes in the documentation. If set to YES, the # scope will be hidden. # The default value is: NO. HIDE_SCOPE_NAMES = NO +# If the HIDE_COMPOUND_REFERENCE tag is set to NO (default) then doxygen will +# append additional text to a page's title, such as Class Reference. If set to +# YES the compound reference will be hidden. +# The default value is: NO. + +HIDE_COMPOUND_REFERENCE= NO + # If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of # the files that are included by a file in the documentation of that file. # The default value is: YES. @@ -564,14 +660,14 @@ INLINE_INFO = NO # If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the # (detailed) documentation of file and class members alphabetically by member -# name. If set to NO the members will appear in declaration order. +# name. If set to NO, the members will appear in declaration order. # The default value is: YES. SORT_MEMBER_DOCS = YES # If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief # descriptions of file, namespace and class members alphabetically by member -# name. If set to NO the members will appear in declaration order. Note that +# name. If set to NO, the members will appear in declaration order. Note that # this will also influence the order of the classes in the class list. # The default value is: NO. @@ -616,27 +712,25 @@ SORT_BY_SCOPE_NAME = NO STRICT_PROTO_MATCHING = NO -# The GENERATE_TODOLIST tag can be used to enable ( YES) or disable ( NO) the -# todo list. This list is created by putting \todo commands in the -# documentation. +# The GENERATE_TODOLIST tag can be used to enable (YES) or disable (NO) the todo +# list. This list is created by putting \todo commands in the documentation. # The default value is: YES. GENERATE_TODOLIST = YES -# The GENERATE_TESTLIST tag can be used to enable ( YES) or disable ( NO) the -# test list. This list is created by putting \test commands in the -# documentation. +# The GENERATE_TESTLIST tag can be used to enable (YES) or disable (NO) the test +# list. This list is created by putting \test commands in the documentation. # The default value is: YES. GENERATE_TESTLIST = NO -# The GENERATE_BUGLIST tag can be used to enable ( YES) or disable ( NO) the bug +# The GENERATE_BUGLIST tag can be used to enable (YES) or disable (NO) the bug # list. This list is created by putting \bug commands in the documentation. # The default value is: YES. GENERATE_BUGLIST = YES -# The GENERATE_DEPRECATEDLIST tag can be used to enable ( YES) or disable ( NO) +# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or disable (NO) # the deprecated list. This list is created by putting \deprecated commands in # the documentation. # The default value is: YES. @@ -661,8 +755,8 @@ ENABLED_SECTIONS = MAX_INITIALIZER_LINES = 30 # Set the SHOW_USED_FILES tag to NO to disable the list of files generated at -# the bottom of the documentation of classes and structs. If set to YES the list -# will mention the files that were used to generate the documentation. +# the bottom of the documentation of classes and structs. If set to YES, the +# list will mention the files that were used to generate the documentation. # The default value is: YES. SHOW_USED_FILES = NO @@ -707,7 +801,7 @@ LAYOUT_FILE = # The CITE_BIB_FILES tag can be used to specify one or more bib files containing # the reference definitions. This must be a list of .bib files. The .bib # extension is automatically appended if omitted. This requires the bibtex tool -# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info. +# to be installed. See also https://en.wikipedia.org/wiki/BibTeX for more info. # For LaTeX the style of the bibliography can be controlled using # LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the # search path. See also \cite for info how to create references. @@ -726,15 +820,15 @@ CITE_BIB_FILES = QUIET = YES # The WARNINGS tag can be used to turn on/off the warning messages that are -# generated to standard error ( stderr) by doxygen. If WARNINGS is set to YES +# generated to standard error (stderr) by doxygen. If WARNINGS is set to YES # this implies that the warnings are on. # # Tip: Turn warnings on while writing the documentation. # The default value is: YES. WARNINGS = YES -# If the WARN_IF_UNDOCUMENTED tag is set to YES, then doxygen will generate +# If the WARN_IF_UNDOCUMENTED tag is set to YES then doxygen will generate # warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag # will automatically be disabled. # The default value is: YES. @@ -751,12 +845,22 @@ WARN_IF_DOC_ERROR = YES # This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that # are documented, but have no documentation for their parameters or return -# value. If set to NO doxygen will only warn about wrong or incomplete parameter -# documentation, but not about the absence of documentation. +# value. If set to NO, doxygen will only warn about wrong or incomplete +# parameter documentation, but not about the absence of documentation. If +# EXTRACT_ALL is set to YES then this flag will automatically be disabled. # The default value is: NO. WARN_NO_PARAMDOC = YES +# If the WARN_AS_ERROR tag is set to YES then doxygen will immediately stop when +# a warning is encountered. If the WARN_AS_ERROR tag is set to FAIL_ON_WARNINGS +# then doxygen will continue running as if WARN_AS_ERROR tag is set to NO, but +# at the end of the doxygen process doxygen will return with a non-zero status. +# Possible values are: NO, YES and FAIL_ON_WARNINGS. +# The default value is: NO. + +WARN_AS_ERROR = NO + # The WARN_FORMAT tag determines the format of the warning messages that doxygen # can produce. The string should contain the $file, $line, and $text tags, which # will be replaced by the file and line number from which the warning originated @@ -765,7 +869,7 @@ WARN_NO_PARAMDOC = YES # FILE_VERSION_FILTER) # The default value is: $file:$line: $text. -WARN_FORMAT = "$file:$line: $text " +WARN_FORMAT = "$file:$line: $text" # The WARN_LOGFILE tag can be used to specify a file to which warning and error # messages should be written. If left blank the output is written to standard @@ -780,7 +884,7 @@ WARN_LOGFILE = # The INPUT tag is used to specify the files and/or directories that contain # documented source files. You may enter file names like myfile.cpp or # directories like /usr/src/myproject. Separate the files or directories with -# spaces. +# spaces. See also FILE_PATTERNS and EXTENSION_MAPPING # Note: If this tag is empty the current directory is searched. INPUT = @top_srcdir@/src/ \ @@ -801,20 +905,29 @@ INPUT = @top_srcdir@/src/ \ # This tag can be used to specify the character encoding of the source files # that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses # libiconv (or the iconv built into libc) for the transcoding. See the libiconv -# documentation (see: http://www.gnu.org/software/libiconv) for the list of -# possible encodings. +# documentation (see: +# https://www.gnu.org/software/libiconv/) for the list of possible encodings. # The default value is: UTF-8. INPUT_ENCODING = UTF-8 # If the value of the INPUT tag contains directories, you can use the # FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and -# *.h) to filter out the source-files in the directories. If left blank the -# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii, -# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp, -# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown, -# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, -# *.qsf, *.as and *.js. +# *.h) to filter out the source-files in the directories. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# read by doxygen. +# +# Note the list of default checked file patterns might differ from the list of +# default file extension mappings. +# +# If left blank the following patterns are tested:*.c, *.cc, *.cxx, *.cpp, +# *.c++, *.java, *.ii, *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, +# *.hh, *.hxx, *.hpp, *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, +# *.m, *.markdown, *.md, *.mm, *.dox (to be provided as doxygen C comment), +# *.py, *.pyw, *.f90, *.f95, *.f03, *.f08, *.f18, *.f, *.for, *.vhd, *.vhdl, +# *.ucf, *.qsf and *.ice. FILE_PATTERNS = *.c \ *.cc \ @@ -918,6 +1031,10 @@ IMAGE_PATH = # Note that the filter must not add or remove lines; it is applied before the # code is scanned, but not when the output code is generated. If lines are added # or removed, the anchors will not be placed correctly. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. INPUT_FILTER = @@ -927,11 +1044,15 @@ INPUT_FILTER = # (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how # filters are used. If the FILTER_PATTERNS tag is empty or if none of the # patterns match the file name, INPUT_FILTER is applied. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. FILTER_PATTERNS = # If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using -# INPUT_FILTER ) will also be used to filter the input files that are used for +# INPUT_FILTER) will also be used to filter the input files that are used for # producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES). # The default value is: NO. @@ -979,7 +1100,7 @@ INLINE_SOURCES = NO STRIP_CODE_COMMENTS = YES # If the REFERENCED_BY_RELATION tag is set to YES then for each documented -# function all documented functions referencing it will be listed. +# entity all documented functions referencing it will be listed. # The default value is: NO. REFERENCED_BY_RELATION = NO @@ -991,7 +1112,7 @@ REFERENCED_BY_RELATION = NO REFERENCES_RELATION = NO # If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set -# to YES, then the hyperlinks from functions in REFERENCES_RELATION and +# to YES then the hyperlinks from functions in REFERENCES_RELATION and # REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will # link to the documentation. # The default value is: YES. @@ -1011,12 +1132,12 @@ SOURCE_TOOLTIPS = YES # If the USE_HTAGS tag is set to YES then the references to source code will # point to the HTML generated by the htags(1) tool instead of doxygen built-in # source browser. The htags tool is part of GNU's global source tagging system -# (see http://www.gnu.org/software/global/global.html). You will need version +# (see https://www.gnu.org/software/global/global.html). You will need version # 4.8.6 or higher. # # To use it do the following: # - Install the latest version of global -# - Enable SOURCE_BROWSER and USE_HTAGS in the config file +# - Enable SOURCE_BROWSER and USE_HTAGS in the configuration file # - Make sure the INPUT points to the root of the source tree # - Run doxygen as normal # @@ -1038,24 +1159,43 @@ USE_HTAGS = NO VERBATIM_HEADERS = NO -# If the CLANG_ASSISTED_PARSING tag is set to YES, then doxygen will use the -# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the -# cost of reduced performance. This can be particularly helpful with template -# rich C++ code for which doxygen's built-in parser lacks the necessary type -# information. +# If the CLANG_ASSISTED_PARSING tag is set to YES then doxygen will use the +# clang parser (see: +# http://clang.llvm.org/) for more accurate parsing at the cost of reduced +# performance. This can be particularly helpful with template rich C++ code for +# which doxygen's built-in parser lacks the necessary type information. # Note: The availability of this option depends on whether or not doxygen was -# compiled with the --with-libclang option. +# generated with the -Duse_libclang=ON option for CMake. # The default value is: NO. -# CLANG_ASSISTED_PARSING = NO +CLANG_ASSISTED_PARSING = NO + +# If clang assisted parsing is enabled and the CLANG_ADD_INC_PATHS tag is set to +# YES then doxygen will add the directory of each input to the include path. +# The default value is: YES. + +CLANG_ADD_INC_PATHS = YES # If clang assisted parsing is enabled you can provide the compiler with command # line options that you would normally use when invoking the compiler. Note that # the include paths will already be set by doxygen for the files and directories # specified with INPUT and INCLUDE_PATH. # This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES. -# CLANG_OPTIONS = +CLANG_OPTIONS = + +# If clang assisted parsing is enabled you can provide the clang parser with the +# path to the directory containing a file called compile_commands.json. This +# file is the compilation database (see: +# http://clang.llvm.org/docs/HowToSetupToolingForLLVM.html) containing the +# options used when the source files were built. This is equivalent to +# specifying the -p option to a clang tool, such as clang-check. These options +# will then be passed to the parser. Any options specified with CLANG_OPTIONS +# will be added as well. +# Note: The availability of this option depends on whether or not doxygen was +# generated with the -Duse_libclang=ON option for CMake. + +CLANG_DATABASE_PATH = #--------------------------------------------------------------------------- # Configuration options related to the alphabetical class index @@ -1068,13 +1208,6 @@ VERBATIM_HEADERS = NO ALPHABETICAL_INDEX = NO -# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in -# which the alphabetical index list will be split. -# Minimum value: 1, maximum value: 20, default value: 5. -# This tag requires that the tag ALPHABETICAL_INDEX is set to YES. - -COLS_IN_ALPHA_INDEX = 5 - # In case all classes in a project start with a common prefix, all classes will # be put under the same header in the alphabetical index. The IGNORE_PREFIX tag # can be used to specify a prefix (or a list of prefixes) that should be ignored @@ -1087,7 +1220,7 @@ IGNORE_PREFIX = # Configuration options related to the HTML output #--------------------------------------------------------------------------- -# If the GENERATE_HTML tag is set to YES doxygen will generate HTML output +# If the GENERATE_HTML tag is set to YES, doxygen will generate HTML output # The default value is: YES. GENERATE_HTML = YES @@ -1153,10 +1286,10 @@ HTML_STYLESHEET = # cascading style sheets that are included after the standard style sheets # created by doxygen. Using this option one can overrule certain style aspects. # This is preferred over using HTML_STYLESHEET since it does not replace the -# standard style sheet and is therefor more robust against future updates. +# standard style sheet and is therefore more robust against future updates. # Doxygen will copy the style sheet files to the output directory. -# Note: The order of the extra stylesheet files is of importance (e.g. the last -# stylesheet in the list overrules the setting of the previous ones in the +# Note: The order of the extra style sheet files is of importance (e.g. the last +# style sheet in the list overrules the setting of the previous ones in the # list). For an example see the documentation. # This tag requires that the tag GENERATE_HTML is set to YES. @@ -1173,9 +1306,9 @@ HTML_EXTRA_STYLESHEET = HTML_EXTRA_FILES = # The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen -# will adjust the colors in the stylesheet and background images according to +# will adjust the colors in the style sheet and background images according to # this color. Hue is specified as an angle on a colorwheel, see -# http://en.wikipedia.org/wiki/Hue for more information. For instance the value +# https://en.wikipedia.org/wiki/Hue for more information. For instance the value # 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300 # purple, and 360 is red again. # Minimum value: 0, maximum value: 359, default value: 220. @@ -1204,12 +1337,24 @@ HTML_COLORSTYLE_GAMMA = 80 # If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML # page will contain the date and time when the page was generated. Setting this -# to NO can help when comparing the output of multiple runs. -# The default value is: YES. +# to YES can help to show when doxygen was last run and thus if the +# documentation is up to date. +# The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. HTML_TIMESTAMP = YES +# If the HTML_DYNAMIC_MENUS tag is set to YES then the generated HTML +# documentation will contain a main index with vertical navigation menus that +# are dynamically created via JavaScript. If disabled, the navigation index will +# consists of multiple levels of tabs that are statically embedded in every HTML +# page. Disable this option to support browsers that do not have JavaScript, +# like the Qt help browser. +# The default value is: YES. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_DYNAMIC_MENUS = YES + # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. @@ -1233,13 +1378,14 @@ HTML_INDEX_NUM_ENTRIES = 100 # If the GENERATE_DOCSET tag is set to YES, additional index files will be # generated that can be used as input for Apple's Xcode 3 integrated development -# environment (see: http://developer.apple.com/tools/xcode/), introduced with -# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a -# Makefile in the HTML output directory. Running make will produce the docset in -# that directory and running make install will install the docset in +# environment (see: +# https://developer.apple.com/xcode/), introduced with OSX 10.5 (Leopard). To +# create a documentation set, doxygen will generate a Makefile in the HTML +# output directory. Running make will produce the docset in that directory and +# running make install will install the docset in # ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at -# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html -# for more information. +# startup. See https://developer.apple.com/library/archive/featuredarticles/Doxy +# genXcode/_index.html for more information. # The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. @@ -1278,8 +1424,8 @@ DOCSET_PUBLISHER_NAME = Publisher # If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three # additional HTML index files: index.hhp, index.hhc, and index.hhk. The # index.hhp is a project file that can be read by Microsoft's HTML Help Workshop -# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on -# Windows. +# (see: +# https://www.microsoft.com/en-us/download/details.aspx?id=21138) on Windows. # # The HTML Help Workshop contains a compiler that can convert all HTML output # generated by doxygen into a single compiled HTML file (.chm). Compiled HTML @@ -1301,28 +1447,28 @@ GENERATE_HTMLHELP = NO CHM_FILE = # The HHC_LOCATION tag can be used to specify the location (absolute path -# including file name) of the HTML help compiler ( hhc.exe). If non-empty +# including file name) of the HTML help compiler (hhc.exe). If non-empty, # doxygen will try to run the HTML help compiler on the generated index.hhp. # The file has to be specified with full path. # This tag requires that the tag GENERATE_HTMLHELP is set to YES. HHC_LOCATION = -# The GENERATE_CHI flag controls if a separate .chi index file is generated ( -# YES) or that it should be included in the master .chm file ( NO). +# The GENERATE_CHI flag controls if a separate .chi index file is generated +# (YES) or that it should be included in the main .chm file (NO). # The default value is: NO. # This tag requires that the tag GENERATE_HTMLHELP is set to YES. GENERATE_CHI = NO -# The CHM_INDEX_ENCODING is used to encode HtmlHelp index ( hhk), content ( hhc) +# The CHM_INDEX_ENCODING is used to encode HtmlHelp index (hhk), content (hhc) # and project file content. # This tag requires that the tag GENERATE_HTMLHELP is set to YES. CHM_INDEX_ENCODING = -# The BINARY_TOC flag controls whether a binary table of contents is generated ( -# YES) or a normal table of contents ( NO) in the .chm file. Furthermore it +# The BINARY_TOC flag controls whether a binary table of contents is generated +# (YES) or a normal table of contents (NO) in the .chm file. Furthermore it # enables the Previous and Next buttons. # The default value is: NO. # This tag requires that the tag GENERATE_HTMLHELP is set to YES. @@ -1354,47 +1500,48 @@ QCH_FILE = # The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help # Project output. For more information please see Qt Help Project / Namespace -# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace). +# (see: +# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#namespace). # The default value is: org.doxygen.Project. # This tag requires that the tag GENERATE_QHP is set to YES. QHP_NAMESPACE = org.doxygen.Project # The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt # Help Project output. For more information please see Qt Help Project / Virtual -# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual- -# folders). +# Folders (see: +# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#virtual-folders). # The default value is: doc. # This tag requires that the tag GENERATE_QHP is set to YES. QHP_VIRTUAL_FOLDER = doc # If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom # filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- -# filters). +# Filters (see: +# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom-filters). # This tag requires that the tag GENERATE_QHP is set to YES. QHP_CUST_FILTER_NAME = # The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the # custom filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- -# filters). +# Filters (see: +# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom-filters). # This tag requires that the tag GENERATE_QHP is set to YES. QHP_CUST_FILTER_ATTRS = # The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this # project's filter section matches. Qt Help Project / Filter Attributes (see: -# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes). +# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#filter-attributes). # This tag requires that the tag GENERATE_QHP is set to YES. QHP_SECT_FILTER_ATTRS = -# The QHG_LOCATION tag can be used to specify the location of Qt's -# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the -# generated .qhp file. +# The QHG_LOCATION tag can be used to specify the location (absolute path +# including file name) of Qt's qhelpgenerator. If non-empty doxygen will try to +# run qhelpgenerator on the generated .qhp file. # This tag requires that the tag GENERATE_QHP is set to YES. QHG_LOCATION = @@ -1436,7 +1583,7 @@ DISABLE_INDEX = NO # index structure (just like the one that is generated for HTML Help). For this # to work a browser that supports JavaScript, DHTML, CSS and frames is required # (i.e. any modern browser). Windows users are probably better off using the -# HTML help feature. Via custom stylesheets (see HTML_EXTRA_STYLESHEET) one can +# HTML help feature. Via custom style sheets (see HTML_EXTRA_STYLESHEET) one can # further fine-tune the look of the index. As an example, the default style # sheet generated by doxygen has an example that shows how to put an image at # the root of the tree instead of the PROJECT_NAME. Since the tree basically has @@ -1464,13 +1611,24 @@ ENUM_VALUES_PER_LINE = 4 TREEVIEW_WIDTH = 250 -# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open links to +# If the EXT_LINKS_IN_WINDOW option is set to YES, doxygen will open links to # external symbols imported via tag files in a separate window. # The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. EXT_LINKS_IN_WINDOW = NO +# If the HTML_FORMULA_FORMAT option is set to svg, doxygen will use the pdf2svg +# tool (see https://github.com/dawbarton/pdf2svg) or inkscape (see +# https://inkscape.org) to generate formulas as SVG images instead of PNGs for +# the HTML output. These images will generally look nicer at scaled resolutions. +# Possible values are: png (the default) and svg (looks nicer but requires the +# pdf2svg or inkscape tool). +# The default value is: png. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_FORMULA_FORMAT = png + # Use this tag to change the font size of LaTeX formulas included as images in # the HTML documentation. When you change the font size after a successful # doxygen run you need to manually remove any form_*.png images from the HTML @@ -1480,7 +1638,7 @@ EXT_LINKS_IN_WINDOW = NO FORMULA_FONTSIZE = 10 -# Use the FORMULA_TRANPARENT tag to determine whether or not the images +# Use the FORMULA_TRANSPARENT tag to determine whether or not the images # generated for formulas are transparent PNGs. Transparent PNGs are not # supported properly for IE 6.0, but are supported on all modern browsers. # @@ -1491,9 +1649,15 @@ FORMULA_FONTSIZE = 10 FORMULA_TRANSPARENT = YES +# The FORMULA_MACROFILE can contain LaTeX \newcommand and \renewcommand commands +# to create new LaTeX commands to be used in formulas as building blocks. See +# the section "Including formulas" for details. + +FORMULA_MACROFILE = + # Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see -# http://www.mathjax.org) which uses client side Javascript for the rendering -# instead of using prerendered bitmaps. Use this if you do not have LaTeX +# https://www.mathjax.org) which uses client side JavaScript for the rendering +# instead of using pre-rendered bitmaps. Use this if you do not have LaTeX # installed or if you want to formulas look prettier in the HTML output. When # enabled you may also need to install MathJax separately and configure the path # to it using the MATHJAX_RELPATH option. @@ -1504,7 +1668,7 @@ USE_MATHJAX = NO # When MathJax is enabled you can set the default output format to be used for # the MathJax output. See the MathJax site (see: -# http://docs.mathjax.org/en/latest/output.html) for more details. +# http://docs.mathjax.org/en/v2.7-latest/output.html) for more details. # Possible values are: HTML-CSS (which is slower, but has the best # compatibility), NativeMML (i.e. MathML) and SVG. # The default value is: HTML-CSS. @@ -1519,8 +1683,8 @@ MATHJAX_FORMAT = HTML-CSS # MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax # Content Delivery Network so you can quickly see the result without installing # MathJax. However, it is strongly recommended to install a local copy of -# MathJax from http://www.mathjax.org before deployment. -# The default value is: http://cdn.mathjax.org/mathjax/latest. +# MathJax from https://www.mathjax.org before deployment. +# The default value is: https://cdn.jsdelivr.net/npm/mathjax@2. # This tag requires that the tag USE_MATHJAX is set to YES. MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest @@ -1534,7 +1698,8 @@ MATHJAX_EXTENSIONS = # The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces # of code that will be used on startup of the MathJax code. See the MathJax site -# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an +# (see: +# http://docs.mathjax.org/en/v2.7-latest/output.html) for more details. For an # example see the documentation. # This tag requires that the tag USE_MATHJAX is set to YES. @@ -1562,7 +1727,7 @@ MATHJAX_CODEFILE = SEARCHENGINE = NO # When the SERVER_BASED_SEARCH tag is enabled the search engine will be -# implemented using a web server instead of a web client using Javascript. There +# implemented using a web server instead of a web client using JavaScript. There # are two flavors of web server based searching depending on the EXTERNAL_SEARCH # setting. When disabled, doxygen will generate a PHP script for searching and # an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing @@ -1579,9 +1744,10 @@ SERVER_BASED_SEARCH = NO # external search engine pointed to by the SEARCHENGINE_URL option to obtain the # search results. # -# Doxygen ships with an example indexer ( doxyindexer) and search engine +# Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). +# Xapian (see: +# https://xapian.org/). # # See the section "External Indexing and Searching" for details. # The default value is: NO. @@ -1592,10 +1758,11 @@ EXTERNAL_SEARCH = NO # The SEARCHENGINE_URL should point to a search engine hosted by a web server # which will return the search results when EXTERNAL_SEARCH is enabled. # -# Doxygen ships with an example indexer ( doxyindexer) and search engine +# Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). See the section "External Indexing and -# Searching" for details. +# Xapian (see: +# https://xapian.org/). See the section "External Indexing and Searching" for +# details. # This tag requires that the tag SEARCHENGINE is set to YES. SEARCHENGINE_URL = @@ -1630,7 +1797,7 @@ EXTRA_SEARCH_MAPPINGS = # Configuration options related to the LaTeX output #--------------------------------------------------------------------------- -# If the GENERATE_LATEX tag is set to YES doxygen will generate LaTeX output. +# If the GENERATE_LATEX tag is set to YES, doxygen will generate LaTeX output. # The default value is: YES. GENERATE_LATEX = NO @@ -1646,22 +1813,36 @@ LATEX_OUTPUT = latex # The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be # invoked. # -# Note that when enabling USE_PDFLATEX this option is only used for generating -# bitmaps for formulas in the HTML output, but not in the Makefile that is -# written to the output directory. -# The default file is: latex. +# Note that when not enabling USE_PDFLATEX the default is latex when enabling +# USE_PDFLATEX the default is pdflatex and when in the later case latex is +# chosen this is overwritten by pdflatex. For specific output languages the +# default can have been set differently, this depends on the implementation of +# the output language. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_CMD_NAME = latex # The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate # index for LaTeX. +# Note: This tag is used in the Makefile / make.bat. +# See also: LATEX_MAKEINDEX_CMD for the part in the generated output file +# (.tex). # The default file is: makeindex. # This tag requires that the tag GENERATE_LATEX is set to YES. MAKEINDEX_CMD_NAME = makeindex -# If the COMPACT_LATEX tag is set to YES doxygen generates more compact LaTeX +# The LATEX_MAKEINDEX_CMD tag can be used to specify the command name to +# generate index for LaTeX. In case there is no backslash (\) as first character +# it will be automatically added in the LaTeX code. +# Note: This tag is used in the generated output file (.tex). +# See also: MAKEINDEX_CMD_NAME for the part in the Makefile / make.bat. +# The default value is: makeindex. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_MAKEINDEX_CMD = makeindex + +# If the COMPACT_LATEX tag is set to YES, doxygen generates more compact LaTeX # documents. This may be useful for small projects and may help to save some # trees in general. # The default value is: NO. @@ -1679,9 +1860,12 @@ COMPACT_LATEX = NO PAPER_TYPE = a4 # The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names -# that should be included in the LaTeX output. To get the times font for -# instance you can specify -# EXTRA_PACKAGES=times +# that should be included in the LaTeX output. The package can be specified just +# by its name or with the correct syntax as to be used with the LaTeX +# \usepackage command. To get the times font for instance you can specify : +# EXTRA_PACKAGES=times or EXTRA_PACKAGES={times} +# To use the option intlimits with the amsmath package you can specify: +# EXTRA_PACKAGES=[intlimits]{amsmath} # If left blank no extra packages will be included. # This tag requires that the tag GENERATE_LATEX is set to YES. @@ -1696,9 +1880,9 @@ EXTRA_PACKAGES = # Note: Only use a user-defined header if you know what you are doing! The # following commands have a special meaning inside the header: $title, # $datetime, $date, $doxygenversion, $projectname, $projectnumber, -# $projectbrief, $projectlogo. Doxygen will replace $title with the empy string, -# for the replacement values of the other commands the user is referred to -# HTML_HEADER. +# $projectbrief, $projectlogo. Doxygen will replace $title with the empty +# string, for the replacement values of the other commands the user is referred +# to HTML_HEADER. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_HEADER = @@ -1714,6 +1898,17 @@ LATEX_HEADER = LATEX_FOOTER = +# The LATEX_EXTRA_STYLESHEET tag can be used to specify additional user-defined +# LaTeX style sheets that are included after the standard style sheets created +# by doxygen. Using this option one can overrule certain style aspects. Doxygen +# will copy the style sheet files to the output directory. +# Note: The order of the extra style sheet files is of importance (e.g. the last +# style sheet in the list overrules the setting of the previous ones in the +# list). +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_EXTRA_STYLESHEET = + # The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the LATEX_OUTPUT output # directory. Note that the files will be copied as-is; there are no commands or @@ -1731,9 +1926,11 @@ LATEX_EXTRA_FILES = PDF_HYPERLINKS = NO -# If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate -# the PDF file directly from the LaTeX files. Set this option to YES to get a -# higher quality PDF documentation. +# If the USE_PDFLATEX tag is set to YES, doxygen will use the engine as +# specified with LATEX_CMD_NAME to generate the PDF file directly from the LaTeX +# files. Set this option to YES, to get a higher quality PDF documentation. +# +# See also section LATEX_CMD_NAME for selecting the engine. # The default value is: YES. # This tag requires that the tag GENERATE_LATEX is set to YES. @@ -1767,17 +1964,33 @@ LATEX_SOURCE_CODE = NO # The LATEX_BIB_STYLE tag can be used to specify the style to use for the # bibliography, e.g. plainnat, or ieeetr. See -# http://en.wikipedia.org/wiki/BibTeX and \cite for more info. +# https://en.wikipedia.org/wiki/BibTeX and \cite for more info. # The default value is: plain. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_BIB_STYLE = plain +# If the LATEX_TIMESTAMP tag is set to YES then the footer of each generated +# page will contain the date and time when the page was generated. Setting this +# to NO can help when comparing the output of multiple runs. +# The default value is: NO. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_TIMESTAMP = NO + +# The LATEX_EMOJI_DIRECTORY tag is used to specify the (relative or absolute) +# path from which the emoji images will be read. If a relative path is entered, +# it will be relative to the LATEX_OUTPUT directory. If left blank the +# LATEX_OUTPUT directory will be used. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_EMOJI_DIRECTORY = + #--------------------------------------------------------------------------- # Configuration options related to the RTF output #--------------------------------------------------------------------------- -# If the GENERATE_RTF tag is set to YES doxygen will generate RTF output. The +# If the GENERATE_RTF tag is set to YES, doxygen will generate RTF output. The # RTF output is optimized for Word 97 and may not look too pretty with other RTF # readers/editors. # The default value is: NO. @@ -1792,7 +2005,7 @@ GENERATE_RTF = NO RTF_OUTPUT = rtf -# If the COMPACT_RTF tag is set to YES doxygen generates more compact RTF +# If the COMPACT_RTF tag is set to YES, doxygen generates more compact RTF # documents. This may be useful for small projects and may help to save some # trees in general. # The default value is: NO. @@ -1812,9 +2025,9 @@ COMPACT_RTF = NO RTF_HYPERLINKS = NO -# Load stylesheet definitions from file. Syntax is similar to doxygen's config -# file, i.e. a series of assignments. You only have to provide replacements, -# missing definitions are set to their default value. +# Load stylesheet definitions from file. Syntax is similar to doxygen's +# configuration file, i.e. a series of assignments. You only have to provide +# replacements, missing definitions are set to their default value. # # See also section "Doxygen usage" for information on how to generate the # default style sheet that doxygen normally uses. @@ -1823,17 +2036,27 @@ RTF_HYPERLINKS = NO RTF_STYLESHEET_FILE = # Set optional variables used in the generation of an RTF document. Syntax is -# similar to doxygen's config file. A template extensions file can be generated -# using doxygen -e rtf extensionFile. +# similar to doxygen's configuration file. A template extensions file can be +# generated using doxygen -e rtf extensionFile. # This tag requires that the tag GENERATE_RTF is set to YES. RTF_EXTENSIONS_FILE = +# If the RTF_SOURCE_CODE tag is set to YES then doxygen will include source code +# with syntax highlighting in the RTF output. +# +# Note that which sources are shown also depends on other settings such as +# SOURCE_BROWSER. +# The default value is: NO. +# This tag requires that the tag GENERATE_RTF is set to YES. + +RTF_SOURCE_CODE = NO + #--------------------------------------------------------------------------- # Configuration options related to the man page output #--------------------------------------------------------------------------- -# If the GENERATE_MAN tag is set to YES doxygen will generate man pages for +# If the GENERATE_MAN tag is set to YES, doxygen will generate man pages for # classes and files. # The default value is: NO. @@ -1877,7 +2100,7 @@ MAN_LINKS = NO # Configuration options related to the XML output #--------------------------------------------------------------------------- -# If the GENERATE_XML tag is set to YES doxygen will generate an XML file that +# If the GENERATE_XML tag is set to YES, doxygen will generate an XML file that # captures the structure of the code including all documentation. # The default value is: NO. @@ -1891,7 +2114,7 @@ GENERATE_XML = NO XML_OUTPUT = xml -# If the XML_PROGRAMLISTING tag is set to YES doxygen will dump the program +# If the XML_PROGRAMLISTING tag is set to YES, doxygen will dump the program # listings (including syntax highlighting and cross-referencing information) to # the XML output. Note that enabling this will significantly increase the size # of the XML output. @@ -1900,11 +2123,18 @@ XML_OUTPUT = xml XML_PROGRAMLISTING = YES +# If the XML_NS_MEMB_FILE_SCOPE tag is set to YES, doxygen will include +# namespace members in file scope as well, matching the HTML output. +# The default value is: NO. +# This tag requires that the tag GENERATE_XML is set to YES. + +XML_NS_MEMB_FILE_SCOPE = NO + #--------------------------------------------------------------------------- # Configuration options related to the DOCBOOK output #--------------------------------------------------------------------------- -# If the GENERATE_DOCBOOK tag is set to YES doxygen will generate Docbook files +# If the GENERATE_DOCBOOK tag is set to YES, doxygen will generate Docbook files # that can be used to generate PDF. # The default value is: NO. @@ -1918,23 +2148,23 @@ GENERATE_DOCBOOK = NO DOCBOOK_OUTPUT = docbook -# If the DOCBOOK_PROGRAMLISTING tag is set to YES doxygen will include the +# If the DOCBOOK_PROGRAMLISTING tag is set to YES, doxygen will include the # program listings (including syntax highlighting and cross-referencing # information) to the DOCBOOK output. Note that enabling this will significantly # increase the size of the DOCBOOK output. # The default value is: NO. # This tag requires that the tag GENERATE_DOCBOOK is set to YES. -# DOCBOOK_PROGRAMLISTING = NO +DOCBOOK_PROGRAMLISTING = NO #--------------------------------------------------------------------------- # Configuration options for the AutoGen Definitions output #--------------------------------------------------------------------------- -# If the GENERATE_AUTOGEN_DEF tag is set to YES doxygen will generate an AutoGen -# Definitions (see http://autogen.sf.net) file that captures the structure of -# the code including all documentation. Note that this feature is still -# experimental and incomplete at the moment. +# If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an +# AutoGen Definitions (see http://autogen.sourceforge.net/) file that captures +# the structure of the code including all documentation. Note that this feature +# is still experimental and incomplete at the moment. # The default value is: NO. GENERATE_AUTOGEN_DEF = NO @@ -1943,25 +2173,25 @@ GENERATE_AUTOGEN_DEF = NO # Configuration options related to the Perl module output #--------------------------------------------------------------------------- -# If the GENERATE_PERLMOD tag is set to YES doxygen will generate a Perl module +# If the GENERATE_PERLMOD tag is set to YES, doxygen will generate a Perl module # file that captures the structure of the code including all documentation. # # Note that this feature is still experimental and incomplete at the moment. # The default value is: NO. GENERATE_PERLMOD = NO -# If the PERLMOD_LATEX tag is set to YES doxygen will generate the necessary +# If the PERLMOD_LATEX tag is set to YES, doxygen will generate the necessary # Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI # output from the Perl module output. # The default value is: NO. # This tag requires that the tag GENERATE_PERLMOD is set to YES. PERLMOD_LATEX = NO -# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be nicely +# If the PERLMOD_PRETTY tag is set to YES, the Perl module output will be nicely # formatted so it can be parsed by a human reader. This is useful if you want to -# understand what is going on. On the other hand, if this tag is set to NO the +# understand what is going on. On the other hand, if this tag is set to NO, the # size of the Perl module output will be much smaller and Perl will parse it # just the same. # The default value is: YES. @@ -1981,14 +2211,14 @@ PERLMOD_MAKEVAR_PREFIX = # Configuration options related to the preprocessor #--------------------------------------------------------------------------- -# If the ENABLE_PREPROCESSING tag is set to YES doxygen will evaluate all +# If the ENABLE_PREPROCESSING tag is set to YES, doxygen will evaluate all # C-preprocessor directives found in the sources and include files. # The default value is: YES. ENABLE_PREPROCESSING = YES -# If the MACRO_EXPANSION tag is set to YES doxygen will expand all macro names -# in the source code. If set to NO only conditional compilation will be +# If the MACRO_EXPANSION tag is set to YES, doxygen will expand all macro names +# in the source code. If set to NO, only conditional compilation will be # performed. Macro expansion can be done in a controlled way by setting # EXPAND_ONLY_PREDEF to YES. # The default value is: NO. @@ -2004,7 +2234,7 @@ MACRO_EXPANSION = YES EXPAND_ONLY_PREDEF = YES -# If the SEARCH_INCLUDES tag is set to YES the includes files in the +# If the SEARCH_INCLUDES tag is set to YES, the include files in the # INCLUDE_PATH will be searched if a #include is found. # The default value is: YES. # This tag requires that the tag ENABLE_PREPROCESSING is set to YES. @@ -2087,20 +2317,21 @@ TAGFILES = GENERATE_TAGFILE = -# If the ALLEXTERNALS tag is set to YES all external class will be listed in the -# class index. If set to NO only the inherited external classes will be listed. +# If the ALLEXTERNALS tag is set to YES, all external class will be listed in +# the class index. If set to NO, only the inherited external classes will be +# listed. # The default value is: NO. ALLEXTERNALS = NO -# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed in -# the modules index. If set to NO, only the current project's groups will be +# If the EXTERNAL_GROUPS tag is set to YES, all external groups will be listed +# in the modules index. If set to NO, only the current project's groups will be # listed. # The default value is: YES. EXTERNAL_GROUPS = YES -# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed in +# If the EXTERNAL_PAGES tag is set to YES, all external pages will be listed in # the related pages index. If set to NO, only the current project's pages will # be listed. # The default value is: YES. @@ -2111,7 +2342,7 @@ EXTERNAL_PAGES = YES # Configuration options related to the dot tool #--------------------------------------------------------------------------- -# If the CLASS_DIAGRAMS tag is set to YES doxygen will generate a class diagram +# If the CLASS_DIAGRAMS tag is set to YES, doxygen will generate a class diagram # (in HTML and LaTeX) for classes with base or super classes. Setting the tag to # NO turns the diagrams off. Note that this option also works with HAVE_DOT # disabled, but it is recommended to install and use dot, since it yields more @@ -2127,7 +2358,7 @@ CLASS_DIAGRAMS = NO DIA_PATH = -# If set to YES, the inheritance and collaboration graphs will hide inheritance +# If set to YES the inheritance and collaboration graphs will hide inheritance # and usage relations if the target is undocumented or is not a class. # The default value is: YES. @@ -2200,7 +2431,7 @@ COLLABORATION_GRAPH = YES GROUP_GRAPHS = YES -# If the UML_LOOK tag is set to YES doxygen will generate inheritance and +# If the UML_LOOK tag is set to YES, doxygen will generate inheritance and # collaboration diagrams in a style similar to the OMG's Unified Modeling # Language. # The default value is: NO. @@ -2217,10 +2448,32 @@ UML_LOOK = NO # but if the number exceeds 15, the total amount of fields shown is limited to # 10. # Minimum value: 0, maximum value: 100, default value: 10. -# This tag requires that the tag HAVE_DOT is set to YES. +# This tag requires that the tag UML_LOOK is set to YES. UML_LIMIT_NUM_FIELDS = 10 +# If the DOT_UML_DETAILS tag is set to NO, doxygen will show attributes and +# methods without types and arguments in the UML graphs. If the DOT_UML_DETAILS +# tag is set to YES, doxygen will add type and arguments for attributes and +# methods in the UML graphs. If the DOT_UML_DETAILS tag is set to NONE, doxygen +# will not generate fields with class member information in the UML graphs. The +# class diagrams will look similar to the default class diagrams but using UML +# notation for the relationships. +# Possible values are: NO, YES and NONE. +# The default value is: NO. +# This tag requires that the tag UML_LOOK is set to YES. + +DOT_UML_DETAILS = NO + +# The DOT_WRAP_THRESHOLD tag can be used to set the maximum number of characters +# to display on a single line. If the actual line length exceeds this threshold +# significantly it will wrapped across multiple lines. Some heuristics are apply +# to avoid ugly line breaks. +# Minimum value: 0, maximum value: 1000, default value: 17. +# This tag requires that the tag HAVE_DOT is set to YES. + +DOT_WRAP_THRESHOLD = 17 + # If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and # collaboration graphs will show the relations between templates and their # instances. @@ -2252,7 +2505,8 @@ INCLUDED_BY_GRAPH = YES # # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable call graphs for selected -# functions only using the \callgraph command. +# functions only using the \callgraph command. Disabling a call graph can be +# accomplished by means of the command \hidecallgraph. # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2263,7 +2517,8 @@ CALL_GRAPH = NO # # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable caller graphs for selected -# functions only using the \callergraph command. +# functions only using the \callergraph command. Disabling a caller graph can be +# accomplished by means of the command \hidecallergraph. # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2286,13 +2541,17 @@ GRAPHICAL_HIERARCHY = YES DIRECTORY_GRAPH = YES # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images -# generated by dot. +# generated by dot. For an explanation of the image formats see the section +# output formats in the documentation of the dot tool (Graphviz (see: +# http://www.graphviz.org/)). # Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order # to make the SVG files visible in IE 9+ (other browsers do not have this # requirement). # Possible values are: png, png:cairo, png:cairo:cairo, png:cairo:gd, png:gd, # png:gd:gd, jpg, jpg:cairo, jpg:cairo:gd, jpg:gd, jpg:gd:gd, gif, gif:cairo, -# gif:cairo:gd, gif:gd, gif:gd:gd and svg. +# gif:cairo:gd, gif:gd, gif:gd:gd, svg, png:gd, png:gd:gd, png:cairo, +# png:cairo:gd, png:cairo:cairo, png:cairo:gdiplus, png:gdiplus and +# png:gdiplus:gdiplus. # The default value is: png. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2340,9 +2599,18 @@ DIAFILE_DIRS = # PlantUML is not used or called during a preprocessing step. Doxygen will # generate a warning when it encounters a \startuml command in this case and # will not generate output for the diagram. -# This tag requires that the tag HAVE_DOT is set to YES. -# PLANTUML_JAR_PATH = +PLANTUML_JAR_PATH = + +# When using plantuml, the PLANTUML_CFG_FILE tag can be used to specify a +# configuration file for plantuml. + +PLANTUML_CFG_FILE = + +# When using plantuml, the specified paths are searched for files specified by +# the !include statement in a plantuml block. + +PLANTUML_INCLUDE_PATH = # The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes # that will be shown in the graph. If the number of nodes in a graph becomes @@ -2380,7 +2648,7 @@ MAX_DOT_GRAPH_DEPTH = 1000 DOT_TRANSPARENT = YES -# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output +# Set the DOT_MULTI_TARGETS tag to YES to allow dot to generate multiple output # files in one run (i.e. multiple -o and -T options on the command line). This # makes dot run faster, but since only newer versions of dot (>1.8.10) support # this, this feature is disabled by default. @@ -2397,9 +2665,11 @@ DOT_MULTI_TARGETS = NO GENERATE_LEGEND = YES -# If the DOT_CLEANUP tag is set to YES doxygen will remove the intermediate dot +# If the DOT_CLEANUP tag is set to YES, doxygen will remove the intermediate # files that are used to generate the various graphs. +# +# Note: This setting is not only used for dot files but also for msc and +# plantuml temporary files. # The default value is: YES. -# This tag requires that the tag HAVE_DOT is set to YES. DOT_CLEANUP = YES -------------- This E-Mail was brought to you by github_commit_mail.py (Source: https://github.com/geany/infrastructure).

1 0

[geany/geany] 1cc2c6: Upgrade Doxyfile.in removing deprectated options
by Frank Lanitz 30 Oct '21

30 Oct '21

Branch: refs/heads/Update-doxygen-configuration Author: Frank Lanitz <frank(a)frank.uvena.de> Committer: Frank Lanitz <frank(a)frank.uvena.de> Date: Sat, 30 Oct 2021 11:22:44 UTC Commit: 1cc2c62f3a4158dc051b98096d13bc5f29105e79 https://github.com/geany/geany/commit/1cc2c62f3a4158dc051b98096d13bc5f29105… Log Message: ----------- Upgrade Doxyfile.in removing deprectated options Modified Paths: -------------- doc/Doxyfile.in Modified: doc/Doxyfile.in 736 lines changed, 503 insertions(+), 233 deletions(-) =================================================================== @@ -1,4 +1,4 @@ -# Doxyfile 1.8.8 +# Doxyfile 1.9.1 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -17,11 +17,11 @@ # Project related configuration options #--------------------------------------------------------------------------- -# This tag specifies the encoding used for all characters in the config file -# that follow. The default is UTF-8 which is also the encoding used for all text -# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv -# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv -# for the list of possible encodings. +# This tag specifies the encoding used for all characters in the configuration +# file that follow. The default is UTF-8 which is also the encoding used for all +# text before the first occurrence of this tag. Doxygen uses libiconv (or the +# iconv built into libc) for the transcoding. See +# https://www.gnu.org/software/libiconv/ for the list of possible encodings. # The default value is: UTF-8. DOXYFILE_ENCODING = UTF-8 @@ -46,10 +46,10 @@ PROJECT_NUMBER = @VERSION@ PROJECT_BRIEF = -# With the PROJECT_LOGO tag one can specify an logo or icon that is included in -# the documentation. The maximum height of the logo should not exceed 55 pixels -# and the maximum width should not exceed 200 pixels. Doxygen will copy the logo -# to the output directory. +# With the PROJECT_LOGO tag one can specify a logo or an icon that is included +# in the documentation. The maximum height of the logo should not exceed 55 +# pixels and the maximum width should not exceed 200 pixels. Doxygen will copy +# the logo to the output directory. PROJECT_LOGO = @@ -60,7 +60,7 @@ PROJECT_LOGO = OUTPUT_DIRECTORY = @top_builddir@/doc -# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create 4096 sub- +# If the CREATE_SUBDIRS tag is set to YES then doxygen will create 4096 sub- # directories (in 2 levels) under the output directory of each output format and # will distribute the generated files over these directories. Enabling this # option can be useful when feeding doxygen a huge amount of source files, where @@ -93,14 +93,22 @@ ALLOW_UNICODE_NAMES = NO OUTPUT_LANGUAGE = English -# If the BRIEF_MEMBER_DESC tag is set to YES doxygen will include brief member +# The OUTPUT_TEXT_DIRECTION tag is used to specify the direction in which all +# documentation generated by doxygen is written. Doxygen will use this +# information to generate all generated output in the proper direction. +# Possible values are: None, LTR, RTL and Context. +# The default value is: None. + +OUTPUT_TEXT_DIRECTION = None + +# If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member # descriptions after the members that are listed in the file and class # documentation (similar to Javadoc). Set to NO to disable this. # The default value is: YES. BRIEF_MEMBER_DESC = YES -# If the REPEAT_BRIEF tag is set to YES doxygen will prepend the brief +# If the REPEAT_BRIEF tag is set to YES, doxygen will prepend the brief # description of a member or function before the detailed description # # Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the @@ -118,9 +126,9 @@ REPEAT_BRIEF = YES # the entity):The $name class, The $name widget, The $name file, is, provides, # specifies, contains, represents, a, an and the. -ABBREVIATE_BRIEF = "The $name class " \ - "The $name widget " \ - "The $name file " \ +ABBREVIATE_BRIEF = "The $name class" \ + "The $name widget" \ + "The $name file" \ is \ provides \ specifies \ @@ -145,7 +153,7 @@ ALWAYS_DETAILED_SEC = NO INLINE_INHERITED_MEMB = NO -# If the FULL_PATH_NAMES tag is set to YES doxygen will prepend the full path +# If the FULL_PATH_NAMES tag is set to YES, doxygen will prepend the full path # before files name in the file list and in the header files. If set to NO the # shortest path that makes the file name unique will be used # The default value is: YES. @@ -189,6 +197,16 @@ SHORT_NAMES = NO JAVADOC_AUTOBRIEF = YES +# If the JAVADOC_BANNER tag is set to YES then doxygen will interpret a line +# such as +# /*************** +# as being the beginning of a Javadoc-style comment "banner". If set to NO, the +# Javadoc-style will behave just like regular comments and it will not be +# interpreted by doxygen. +# The default value is: NO. + +JAVADOC_BANNER = NO + # If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first # line (until the first dot) of a Qt-style comment as the brief description. If # set to NO, the Qt-style will behave just like regular Qt-style comments (thus @@ -209,15 +227,23 @@ QT_AUTOBRIEF = NO MULTILINE_CPP_IS_BRIEF = NO +# By default Python docstrings are displayed as preformatted text and doxygen's +# special commands cannot be used. By setting PYTHON_DOCSTRING to NO the +# doxygen's special commands can be used and the contents of the docstring +# documentation blocks is shown as doxygen documentation. +# The default value is: YES. + +PYTHON_DOCSTRING = YES + # If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the # documentation from any documented member that it re-implements. # The default value is: YES. INHERIT_DOCS = YES -# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce a -# new page for each member. If set to NO, the documentation of a member will be -# part of the file/class/namespace that contains it. +# If the SEPARATE_MEMBER_PAGES tag is set to YES then doxygen will produce a new +# page for each member. If set to NO, the documentation of a member will be part +# of the file/class/namespace that contains it. # The default value is: NO. SEPARATE_MEMBER_PAGES = NO @@ -236,35 +262,37 @@ TAB_SIZE = 4 # will allow you to put the command \sideeffect (or @sideeffect) in the # documentation, which will result in a user-defined paragraph with heading # "Side Effects:". You can put \n's in the value part of an alias to insert -# newlines. +# newlines (in the resulting output). You can put ^^ in the value part of an +# alias to insert a newline as if a physical newline was in the original file. +# When you need a literal { or } or , in the value part of an alias you have to +# escape them by means of a backslash (\), this can lead to conflicts with the +# commands \{ and \} for these it is advised to use the version @{ and @} or use +# a double escape (\\{ and \\}) ## ALIASES taken from pidgin -ALIASES = "signal=- @ref " \ - "signaldef=@subsection " \ - "endsignaldef= " \ - "signalproto=@code " \ - "endsignalproto=@endcode " \ - "signaldesc=" \ - "signals=@b Signals: " \ - "endsignals= " \ - "gironly=@internal" - -# Apparently Doxygen doesn't seem to like \<type>only without a previous command, so create a no-op -ALIASES += "noop=\if FALSE \endif" -ALIASES += "transfer{1}=\noop \xmlonly <simplesect kind=\"geany:transfer\">\1</simplesect>\endxmlonly \htmlonly (transfer: \1) \endhtmlonly" -ALIASES += "elementtype{1}=\noop \xmlonly <simplesect kind=\"geany:element-type\">\1</simplesect>\endxmlonly \htmlonly (element-type: \1) \endhtmlonly" -ALIASES += "scope{1}=\noop \xmlonly <simplesect kind=\"geany:scope\">\1</simplesect>\endxmlonly \htmlonly (scope: \1) \endhtmlonly" -ALIASES += "girskip=\noop \xmlonly <simplesect kind=\"geany:skip\"></simplesect>\endxmlonly" -ALIASES += "nullable=\noop \xmlonly <simplesect kind=\"geany:nullable\"></simplesect>\endxmlonly" -ALIASES += "out=\noop \xmlonly <simplesect kind=\"geany:out\"></simplesect>\endxmlonly \htmlonly (out) \endhtmlonly" -ALIASES += "optional=\noop \xmlonly <simplesect kind=\"geany:optional\"></simplesect>\endxmlonly" -ALIASES += "cb=\noop \xmlonly <simplesect kind=\"geany:scope\">notified</simplesect>\endxmlonly" -ALIASES += "cbdata=\noop \xmlonly <simplesect kind=\"geany:closure\"></simplesect>\endxmlonly" -ALIASES += "cbfree=\noop \xmlonly <simplesect kind=\"geany:destroy\"></simplesect>\endxmlonly" -ALIASES += "array=\noop \xmlonly <simplesect kind=\"geany:array\"></simplesect>\endxmlonly" -ALIASES += "array{1}=\noop \xmlonly <simplesect kind=\"geany:array\">\1</simplesect>\endxmlonly" - +ALIASES = "signal=- @ref " \ + "signaldef=@subsection " \ + "endsignaldef= " \ + "signalproto=@code " \ + "endsignalproto=@endcode " \ + signaldesc= \ + "signals=@b Signals: " \ + "endsignals= " \ + gironly=@internal \ + "noop=\if FALSE \endif" \ + "transfer{1}=\noop \xmlonly <simplesect kind=\"geany:transfer\">\1</simplesect>\endxmlonly \htmlonly (transfer: \1) \endhtmlonly" \ + "elementtype{1}=\noop \xmlonly <simplesect kind=\"geany:element-type\">\1</simplesect>\endxmlonly \htmlonly (element-type: \1) \endhtmlonly" \ + "scope{1}=\noop \xmlonly <simplesect kind=\"geany:scope\">\1</simplesect>\endxmlonly \htmlonly (scope: \1) \endhtmlonly" \ + "girskip=\noop \xmlonly <simplesect kind=\"geany:skip\"></simplesect>\endxmlonly" \ + "nullable=\noop \xmlonly <simplesect kind=\"geany:nullable\"></simplesect>\endxmlonly" \ + "out=\noop \xmlonly <simplesect kind=\"geany:out\"></simplesect>\endxmlonly \htmlonly (out) \endhtmlonly" \ + "optional=\noop \xmlonly <simplesect kind=\"geany:optional\"></simplesect>\endxmlonly" \ + "cb=\noop \xmlonly <simplesect kind=\"geany:scope\">notified</simplesect>\endxmlonly" \ + "cbdata=\noop \xmlonly <simplesect kind=\"geany:closure\"></simplesect>\endxmlonly" \ + "cbfree=\noop \xmlonly <simplesect kind=\"geany:destroy\"></simplesect>\endxmlonly" \ + "array=\noop \xmlonly <simplesect kind=\"geany:array\"></simplesect>\endxmlonly" \ + "array{1}=\noop \xmlonly <simplesect kind=\"geany:array\">\1</simplesect>\endxmlonly" # Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources # only. Doxygen will then generate output that is more tailored for C. For @@ -294,39 +322,60 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO +# Set the OPTIMIZE_OUTPUT_SLICE tag to YES if your project consists of Slice +# sources only. Doxygen will then generate output that is more tailored for that +# language. For instance, namespaces will be presented as modules, types will be +# separated into more groups, etc. +# The default value is: NO. + +OPTIMIZE_OUTPUT_SLICE = NO + # Doxygen selects the parser to use depending on the extension of the files it # parses. With this tag you can assign which parser to use for a given # extension. Doxygen has a built-in mapping, but you can override or extend it # using this tag. The format is ext=language, where ext is a file extension, and -# language is one of the parsers supported by doxygen: IDL, Java, Javascript, -# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran: -# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran: -# Fortran. In the later case the parser tries to guess whether the code is fixed -# or free formatted code, this is the default for Fortran type files), VHDL. For -# instance to make doxygen treat .inc files as Fortran files (default is PHP), -# and .f files as C (default is Fortran), use: inc=Fortran f=C. +# language is one of the parsers supported by doxygen: IDL, Java, JavaScript, +# Csharp (C#), C, C++, D, PHP, md (Markdown), Objective-C, Python, Slice, VHDL, +# Fortran (fixed format Fortran: FortranFixed, free formatted Fortran: +# FortranFree, unknown formatted Fortran: Fortran. In the later case the parser +# tries to guess whether the code is fixed or free formatted code, this is the +# default for Fortran type files). For instance to make doxygen treat .inc files +# as Fortran files (default is PHP), and .f files as C (default is Fortran), +# use: inc=Fortran f=C. # -# Note For files without extension you can use no_extension as a placeholder. +# Note: For files without extension you can use no_extension as a placeholder. # # Note that for custom extensions you also need to set FILE_PATTERNS otherwise -# the files are not read by doxygen. +# the files are not read by doxygen. When specifying no_extension you should add +# * to the FILE_PATTERNS. +# +# Note see also the list of default file extension mappings. EXTENSION_MAPPING = # If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments # according to the Markdown format, which allows for more readable -# documentation. See http://daringfireball.net/projects/markdown/ for details. +# documentation. See https://daringfireball.net/projects/markdown/ for details. # The output of markdown processing is further processed by doxygen, so you can # mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in # case of backward compatibilities issues. # The default value is: YES. MARKDOWN_SUPPORT = YES +# When the TOC_INCLUDE_HEADINGS tag is set to a non-zero value, all headings up +# to that level are automatically included in the table of contents, even if +# they do not have an id attribute. +# Note: This feature currently applies only to Markdown headings. +# Minimum value: 0, maximum value: 99, default value: 5. +# This tag requires that the tag MARKDOWN_SUPPORT is set to YES. + +TOC_INCLUDE_HEADINGS = 5 + # When enabled doxygen tries to link words that correspond to documented # classes, or namespaces to their corresponding documentation. Such a link can -# be prevented in individual cases by by putting a % sign in front of the word -# or globally by setting AUTOLINK_SUPPORT to NO. +# be prevented in individual cases by putting a % sign in front of the word or +# globally by setting AUTOLINK_SUPPORT to NO. # The default value is: YES. AUTOLINK_SUPPORT = YES @@ -348,7 +397,7 @@ BUILTIN_STL_SUPPORT = NO CPP_CLI_SUPPORT = NO # Set the SIP_SUPPORT tag to YES if your project consists of sip (see: -# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen +# https://www.riverbankcomputing.com/software/sip/intro) sources only. Doxygen # will parse them like normal C++ but will assume all classes use public instead # of private inheritance when no explicit protection keyword is present. # The default value is: NO. @@ -366,13 +415,20 @@ SIP_SUPPORT = NO IDL_PROPERTY_SUPPORT = YES # If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC -# tag is set to YES, then doxygen will reuse the documentation of the first +# tag is set to YES then doxygen will reuse the documentation of the first # member in the group (if any) for the other members of the group. By default # all members of a group must be documented explicitly. # The default value is: NO. DISTRIBUTE_GROUP_DOC = NO +# If one adds a struct or class to a group and this option is enabled, then also +# any nested class or struct is added to the same group. By default this option +# is disabled and one has to add nested compounds explicitly via \ingroup. +# The default value is: NO. + +GROUP_NESTED_COMPOUNDS = NO + # Set the SUBGROUPING tag to YES to allow class member groups of the same type # (for instance a group of public functions) to be put as a subgroup of that # type (e.g. under the Public Functions section). Set it to NO to prevent @@ -427,11 +483,24 @@ TYPEDEF_HIDES_STRUCT = NO LOOKUP_CACHE_SIZE = 0 +# The NUM_PROC_THREADS specifies the number threads doxygen is allowed to use +# during processing. When set to 0 doxygen will based this on the number of +# cores available in the system. You can set it explicitly to a value larger +# than 0 to get more control over the balance between CPU load and processing +# speed. At this moment only the input processing can be done using multiple +# threads. Since this is still an experimental feature the default is set to 1, +# which efficively disables parallel processing. Please report any issues you +# encounter. Generating dot graphs in parallel is controlled by the +# DOT_NUM_THREADS setting. +# Minimum value: 0, maximum value: 32, default value: 1. + +NUM_PROC_THREADS = 1 + #--------------------------------------------------------------------------- # Build related configuration options #--------------------------------------------------------------------------- -# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in +# If the EXTRACT_ALL tag is set to YES, doxygen will assume all entities in # documentation are documented, even if no documentation was available. Private # class members and static file members will be hidden unless the # EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES. @@ -441,35 +510,41 @@ LOOKUP_CACHE_SIZE = 0 EXTRACT_ALL = NO -# If the EXTRACT_PRIVATE tag is set to YES all private members of a class will +# If the EXTRACT_PRIVATE tag is set to YES, all private members of a class will # be included in the documentation. # The default value is: NO. EXTRACT_PRIVATE = NO -# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal +# If the EXTRACT_PRIV_VIRTUAL tag is set to YES, documented private virtual +# methods of a class will be included in the documentation. +# The default value is: NO. + +EXTRACT_PRIV_VIRTUAL = NO + +# If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal # scope will be included in the documentation. # The default value is: NO. EXTRACT_PACKAGE = NO -# If the EXTRACT_STATIC tag is set to YES all static members of a file will be +# If the EXTRACT_STATIC tag is set to YES, all static members of a file will be # included in the documentation. # The default value is: NO. EXTRACT_STATIC = NO -# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) defined -# locally in source files will be included in the documentation. If set to NO +# If the EXTRACT_LOCAL_CLASSES tag is set to YES, classes (and structs) defined +# locally in source files will be included in the documentation. If set to NO, # only classes defined in header files are included. Does not have any effect # for Java sources. # The default value is: YES. EXTRACT_LOCAL_CLASSES = YES -# This flag is only useful for Objective-C code. When set to YES local methods, +# This flag is only useful for Objective-C code. If set to YES, local methods, # which are defined in the implementation section but not in the interface are -# included in the documentation. If set to NO only methods in the interface are +# included in the documentation. If set to NO, only methods in the interface are # included. # The default value is: NO. @@ -484,6 +559,13 @@ EXTRACT_LOCAL_METHODS = NO EXTRACT_ANON_NSPACES = NO +# If this flag is set to YES, the name of an unnamed parameter in a declaration +# will be determined by the corresponding definition. By default unnamed +# parameters remain unnamed in the output. +# The default value is: YES. + +RESOLVE_UNNAMED_PARAMS = YES + # If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all # undocumented members inside documented classes or files. If set to NO these # members will be included in the various overviews, but no documentation @@ -494,21 +576,21 @@ HIDE_UNDOC_MEMBERS = YES # If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all # undocumented classes that are normally visible in the class hierarchy. If set -# to NO these classes will be included in the various overviews. This option has -# no effect if EXTRACT_ALL is enabled. +# to NO, these classes will be included in the various overviews. This option +# has no effect if EXTRACT_ALL is enabled. # The default value is: NO. HIDE_UNDOC_CLASSES = YES # If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend -# (class|struct|union) declarations. If set to NO these declarations will be -# included in the documentation. +# declarations. If set to NO, these declarations will be included in the +# documentation. # The default value is: NO. HIDE_FRIEND_COMPOUNDS = NO # If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any -# documentation blocks found inside the body of a function. If set to NO these +# documentation blocks found inside the body of a function. If set to NO, these # blocks will be appended to the function's detailed documentation block. # The default value is: NO. @@ -521,22 +603,36 @@ HIDE_IN_BODY_DOCS = YES INTERNAL_DOCS = NO -# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file -# names in lower-case letters. If set to YES upper-case letters are also -# allowed. This is useful if you have classes or files whose names only differ -# in case and if your file system supports case sensitive file names. Windows -# and Mac users are advised to set this option to NO. +# With the correct setting of option CASE_SENSE_NAMES doxygen will better be +# able to match the capabilities of the underlying filesystem. In case the +# filesystem is case sensitive (i.e. it supports files in the same directory +# whose names only differ in casing), the option must be set to YES to properly +# deal with such files in case they appear in the input. For filesystems that +# are not case sensitive the option should be be set to NO to properly deal with +# output files written for symbols that only differ in casing, such as for two +# classes, one named CLASS and the other named Class, and to also support +# references to files without having to specify the exact matching casing. On +# Windows (including Cygwin) and MacOS, users should typically set this option +# to NO, whereas on Linux or other Unix flavors it should typically be set to +# YES. # The default value is: system dependent. CASE_SENSE_NAMES = YES # If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with -# their full class and namespace scopes in the documentation. If set to YES the +# their full class and namespace scopes in the documentation. If set to YES, the # scope will be hidden. # The default value is: NO. HIDE_SCOPE_NAMES = NO +# If the HIDE_COMPOUND_REFERENCE tag is set to NO (default) then doxygen will +# append additional text to a page's title, such as Class Reference. If set to +# YES the compound reference will be hidden. +# The default value is: NO. + +HIDE_COMPOUND_REFERENCE= NO + # If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of # the files that are included by a file in the documentation of that file. # The default value is: YES. @@ -564,14 +660,14 @@ INLINE_INFO = NO # If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the # (detailed) documentation of file and class members alphabetically by member -# name. If set to NO the members will appear in declaration order. +# name. If set to NO, the members will appear in declaration order. # The default value is: YES. SORT_MEMBER_DOCS = YES # If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief # descriptions of file, namespace and class members alphabetically by member -# name. If set to NO the members will appear in declaration order. Note that +# name. If set to NO, the members will appear in declaration order. Note that # this will also influence the order of the classes in the class list. # The default value is: NO. @@ -616,27 +712,25 @@ SORT_BY_SCOPE_NAME = NO STRICT_PROTO_MATCHING = NO -# The GENERATE_TODOLIST tag can be used to enable ( YES) or disable ( NO) the -# todo list. This list is created by putting \todo commands in the -# documentation. +# The GENERATE_TODOLIST tag can be used to enable (YES) or disable (NO) the todo +# list. This list is created by putting \todo commands in the documentation. # The default value is: YES. GENERATE_TODOLIST = YES -# The GENERATE_TESTLIST tag can be used to enable ( YES) or disable ( NO) the -# test list. This list is created by putting \test commands in the -# documentation. +# The GENERATE_TESTLIST tag can be used to enable (YES) or disable (NO) the test +# list. This list is created by putting \test commands in the documentation. # The default value is: YES. GENERATE_TESTLIST = NO -# The GENERATE_BUGLIST tag can be used to enable ( YES) or disable ( NO) the bug +# The GENERATE_BUGLIST tag can be used to enable (YES) or disable (NO) the bug # list. This list is created by putting \bug commands in the documentation. # The default value is: YES. GENERATE_BUGLIST = YES -# The GENERATE_DEPRECATEDLIST tag can be used to enable ( YES) or disable ( NO) +# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or disable (NO) # the deprecated list. This list is created by putting \deprecated commands in # the documentation. # The default value is: YES. @@ -661,8 +755,8 @@ ENABLED_SECTIONS = MAX_INITIALIZER_LINES = 30 # Set the SHOW_USED_FILES tag to NO to disable the list of files generated at -# the bottom of the documentation of classes and structs. If set to YES the list -# will mention the files that were used to generate the documentation. +# the bottom of the documentation of classes and structs. If set to YES, the +# list will mention the files that were used to generate the documentation. # The default value is: YES. SHOW_USED_FILES = NO @@ -707,7 +801,7 @@ LAYOUT_FILE = # The CITE_BIB_FILES tag can be used to specify one or more bib files containing # the reference definitions. This must be a list of .bib files. The .bib # extension is automatically appended if omitted. This requires the bibtex tool -# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info. +# to be installed. See also https://en.wikipedia.org/wiki/BibTeX for more info. # For LaTeX the style of the bibliography can be controlled using # LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the # search path. See also \cite for info how to create references. @@ -726,15 +820,15 @@ CITE_BIB_FILES = QUIET = YES # The WARNINGS tag can be used to turn on/off the warning messages that are -# generated to standard error ( stderr) by doxygen. If WARNINGS is set to YES +# generated to standard error (stderr) by doxygen. If WARNINGS is set to YES # this implies that the warnings are on. # # Tip: Turn warnings on while writing the documentation. # The default value is: YES. WARNINGS = YES -# If the WARN_IF_UNDOCUMENTED tag is set to YES, then doxygen will generate +# If the WARN_IF_UNDOCUMENTED tag is set to YES then doxygen will generate # warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag # will automatically be disabled. # The default value is: YES. @@ -751,12 +845,22 @@ WARN_IF_DOC_ERROR = YES # This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that # are documented, but have no documentation for their parameters or return -# value. If set to NO doxygen will only warn about wrong or incomplete parameter -# documentation, but not about the absence of documentation. +# value. If set to NO, doxygen will only warn about wrong or incomplete +# parameter documentation, but not about the absence of documentation. If +# EXTRACT_ALL is set to YES then this flag will automatically be disabled. # The default value is: NO. WARN_NO_PARAMDOC = YES +# If the WARN_AS_ERROR tag is set to YES then doxygen will immediately stop when +# a warning is encountered. If the WARN_AS_ERROR tag is set to FAIL_ON_WARNINGS +# then doxygen will continue running as if WARN_AS_ERROR tag is set to NO, but +# at the end of the doxygen process doxygen will return with a non-zero status. +# Possible values are: NO, YES and FAIL_ON_WARNINGS. +# The default value is: NO. + +WARN_AS_ERROR = NO + # The WARN_FORMAT tag determines the format of the warning messages that doxygen # can produce. The string should contain the $file, $line, and $text tags, which # will be replaced by the file and line number from which the warning originated @@ -765,7 +869,7 @@ WARN_NO_PARAMDOC = YES # FILE_VERSION_FILTER) # The default value is: $file:$line: $text. -WARN_FORMAT = "$file:$line: $text " +WARN_FORMAT = "$file:$line: $text" # The WARN_LOGFILE tag can be used to specify a file to which warning and error # messages should be written. If left blank the output is written to standard @@ -780,7 +884,7 @@ WARN_LOGFILE = # The INPUT tag is used to specify the files and/or directories that contain # documented source files. You may enter file names like myfile.cpp or # directories like /usr/src/myproject. Separate the files or directories with -# spaces. +# spaces. See also FILE_PATTERNS and EXTENSION_MAPPING # Note: If this tag is empty the current directory is searched. INPUT = @top_srcdir@/src/ \ @@ -801,20 +905,29 @@ INPUT = @top_srcdir@/src/ \ # This tag can be used to specify the character encoding of the source files # that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses # libiconv (or the iconv built into libc) for the transcoding. See the libiconv -# documentation (see: http://www.gnu.org/software/libiconv) for the list of -# possible encodings. +# documentation (see: +# https://www.gnu.org/software/libiconv/) for the list of possible encodings. # The default value is: UTF-8. INPUT_ENCODING = UTF-8 # If the value of the INPUT tag contains directories, you can use the # FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and -# *.h) to filter out the source-files in the directories. If left blank the -# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii, -# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp, -# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown, -# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, -# *.qsf, *.as and *.js. +# *.h) to filter out the source-files in the directories. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# read by doxygen. +# +# Note the list of default checked file patterns might differ from the list of +# default file extension mappings. +# +# If left blank the following patterns are tested:*.c, *.cc, *.cxx, *.cpp, +# *.c++, *.java, *.ii, *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, +# *.hh, *.hxx, *.hpp, *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, +# *.m, *.markdown, *.md, *.mm, *.dox (to be provided as doxygen C comment), +# *.py, *.pyw, *.f90, *.f95, *.f03, *.f08, *.f18, *.f, *.for, *.vhd, *.vhdl, +# *.ucf, *.qsf and *.ice. FILE_PATTERNS = *.c \ *.cc \ @@ -918,6 +1031,10 @@ IMAGE_PATH = # Note that the filter must not add or remove lines; it is applied before the # code is scanned, but not when the output code is generated. If lines are added # or removed, the anchors will not be placed correctly. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. INPUT_FILTER = @@ -927,11 +1044,15 @@ INPUT_FILTER = # (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how # filters are used. If the FILTER_PATTERNS tag is empty or if none of the # patterns match the file name, INPUT_FILTER is applied. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. FILTER_PATTERNS = # If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using -# INPUT_FILTER ) will also be used to filter the input files that are used for +# INPUT_FILTER) will also be used to filter the input files that are used for # producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES). # The default value is: NO. @@ -979,7 +1100,7 @@ INLINE_SOURCES = NO STRIP_CODE_COMMENTS = YES # If the REFERENCED_BY_RELATION tag is set to YES then for each documented -# function all documented functions referencing it will be listed. +# entity all documented functions referencing it will be listed. # The default value is: NO. REFERENCED_BY_RELATION = NO @@ -991,7 +1112,7 @@ REFERENCED_BY_RELATION = NO REFERENCES_RELATION = NO # If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set -# to YES, then the hyperlinks from functions in REFERENCES_RELATION and +# to YES then the hyperlinks from functions in REFERENCES_RELATION and # REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will # link to the documentation. # The default value is: YES. @@ -1011,12 +1132,12 @@ SOURCE_TOOLTIPS = YES # If the USE_HTAGS tag is set to YES then the references to source code will # point to the HTML generated by the htags(1) tool instead of doxygen built-in # source browser. The htags tool is part of GNU's global source tagging system -# (see http://www.gnu.org/software/global/global.html). You will need version +# (see https://www.gnu.org/software/global/global.html). You will need version # 4.8.6 or higher. # # To use it do the following: # - Install the latest version of global -# - Enable SOURCE_BROWSER and USE_HTAGS in the config file +# - Enable SOURCE_BROWSER and USE_HTAGS in the configuration file # - Make sure the INPUT points to the root of the source tree # - Run doxygen as normal # @@ -1038,24 +1159,43 @@ USE_HTAGS = NO VERBATIM_HEADERS = NO -# If the CLANG_ASSISTED_PARSING tag is set to YES, then doxygen will use the -# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the -# cost of reduced performance. This can be particularly helpful with template -# rich C++ code for which doxygen's built-in parser lacks the necessary type -# information. +# If the CLANG_ASSISTED_PARSING tag is set to YES then doxygen will use the +# clang parser (see: +# http://clang.llvm.org/) for more accurate parsing at the cost of reduced +# performance. This can be particularly helpful with template rich C++ code for +# which doxygen's built-in parser lacks the necessary type information. # Note: The availability of this option depends on whether or not doxygen was -# compiled with the --with-libclang option. +# generated with the -Duse_libclang=ON option for CMake. # The default value is: NO. -# CLANG_ASSISTED_PARSING = NO +CLANG_ASSISTED_PARSING = NO + +# If clang assisted parsing is enabled and the CLANG_ADD_INC_PATHS tag is set to +# YES then doxygen will add the directory of each input to the include path. +# The default value is: YES. + +CLANG_ADD_INC_PATHS = YES # If clang assisted parsing is enabled you can provide the compiler with command # line options that you would normally use when invoking the compiler. Note that # the include paths will already be set by doxygen for the files and directories # specified with INPUT and INCLUDE_PATH. # This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES. -# CLANG_OPTIONS = +CLANG_OPTIONS = + +# If clang assisted parsing is enabled you can provide the clang parser with the +# path to the directory containing a file called compile_commands.json. This +# file is the compilation database (see: +# http://clang.llvm.org/docs/HowToSetupToolingForLLVM.html) containing the +# options used when the source files were built. This is equivalent to +# specifying the -p option to a clang tool, such as clang-check. These options +# will then be passed to the parser. Any options specified with CLANG_OPTIONS +# will be added as well. +# Note: The availability of this option depends on whether or not doxygen was +# generated with the -Duse_libclang=ON option for CMake. + +CLANG_DATABASE_PATH = #--------------------------------------------------------------------------- # Configuration options related to the alphabetical class index @@ -1068,13 +1208,6 @@ VERBATIM_HEADERS = NO ALPHABETICAL_INDEX = NO -# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in -# which the alphabetical index list will be split. -# Minimum value: 1, maximum value: 20, default value: 5. -# This tag requires that the tag ALPHABETICAL_INDEX is set to YES. - -COLS_IN_ALPHA_INDEX = 5 - # In case all classes in a project start with a common prefix, all classes will # be put under the same header in the alphabetical index. The IGNORE_PREFIX tag # can be used to specify a prefix (or a list of prefixes) that should be ignored @@ -1087,7 +1220,7 @@ IGNORE_PREFIX = # Configuration options related to the HTML output #--------------------------------------------------------------------------- -# If the GENERATE_HTML tag is set to YES doxygen will generate HTML output +# If the GENERATE_HTML tag is set to YES, doxygen will generate HTML output # The default value is: YES. GENERATE_HTML = YES @@ -1153,10 +1286,10 @@ HTML_STYLESHEET = # cascading style sheets that are included after the standard style sheets # created by doxygen. Using this option one can overrule certain style aspects. # This is preferred over using HTML_STYLESHEET since it does not replace the -# standard style sheet and is therefor more robust against future updates. +# standard style sheet and is therefore more robust against future updates. # Doxygen will copy the style sheet files to the output directory. -# Note: The order of the extra stylesheet files is of importance (e.g. the last -# stylesheet in the list overrules the setting of the previous ones in the +# Note: The order of the extra style sheet files is of importance (e.g. the last +# style sheet in the list overrules the setting of the previous ones in the # list). For an example see the documentation. # This tag requires that the tag GENERATE_HTML is set to YES. @@ -1173,9 +1306,9 @@ HTML_EXTRA_STYLESHEET = HTML_EXTRA_FILES = # The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen -# will adjust the colors in the stylesheet and background images according to +# will adjust the colors in the style sheet and background images according to # this color. Hue is specified as an angle on a colorwheel, see -# http://en.wikipedia.org/wiki/Hue for more information. For instance the value +# https://en.wikipedia.org/wiki/Hue for more information. For instance the value # 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300 # purple, and 360 is red again. # Minimum value: 0, maximum value: 359, default value: 220. @@ -1204,12 +1337,24 @@ HTML_COLORSTYLE_GAMMA = 80 # If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML # page will contain the date and time when the page was generated. Setting this -# to NO can help when comparing the output of multiple runs. -# The default value is: YES. +# to YES can help to show when doxygen was last run and thus if the +# documentation is up to date. +# The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. HTML_TIMESTAMP = YES +# If the HTML_DYNAMIC_MENUS tag is set to YES then the generated HTML +# documentation will contain a main index with vertical navigation menus that +# are dynamically created via JavaScript. If disabled, the navigation index will +# consists of multiple levels of tabs that are statically embedded in every HTML +# page. Disable this option to support browsers that do not have JavaScript, +# like the Qt help browser. +# The default value is: YES. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_DYNAMIC_MENUS = YES + # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. @@ -1233,13 +1378,14 @@ HTML_INDEX_NUM_ENTRIES = 100 # If the GENERATE_DOCSET tag is set to YES, additional index files will be # generated that can be used as input for Apple's Xcode 3 integrated development -# environment (see: http://developer.apple.com/tools/xcode/), introduced with -# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a -# Makefile in the HTML output directory. Running make will produce the docset in -# that directory and running make install will install the docset in +# environment (see: +# https://developer.apple.com/xcode/), introduced with OSX 10.5 (Leopard). To +# create a documentation set, doxygen will generate a Makefile in the HTML +# output directory. Running make will produce the docset in that directory and +# running make install will install the docset in # ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at -# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html -# for more information. +# startup. See https://developer.apple.com/library/archive/featuredarticles/Doxy +# genXcode/_index.html for more information. # The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. @@ -1278,8 +1424,8 @@ DOCSET_PUBLISHER_NAME = Publisher # If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three # additional HTML index files: index.hhp, index.hhc, and index.hhk. The # index.hhp is a project file that can be read by Microsoft's HTML Help Workshop -# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on -# Windows. +# (see: +# https://www.microsoft.com/en-us/download/details.aspx?id=21138) on Windows. # # The HTML Help Workshop contains a compiler that can convert all HTML output # generated by doxygen into a single compiled HTML file (.chm). Compiled HTML @@ -1301,28 +1447,28 @@ GENERATE_HTMLHELP = NO CHM_FILE = # The HHC_LOCATION tag can be used to specify the location (absolute path -# including file name) of the HTML help compiler ( hhc.exe). If non-empty +# including file name) of the HTML help compiler (hhc.exe). If non-empty, # doxygen will try to run the HTML help compiler on the generated index.hhp. # The file has to be specified with full path. # This tag requires that the tag GENERATE_HTMLHELP is set to YES. HHC_LOCATION = -# The GENERATE_CHI flag controls if a separate .chi index file is generated ( -# YES) or that it should be included in the master .chm file ( NO). +# The GENERATE_CHI flag controls if a separate .chi index file is generated +# (YES) or that it should be included in the main .chm file (NO). # The default value is: NO. # This tag requires that the tag GENERATE_HTMLHELP is set to YES. GENERATE_CHI = NO -# The CHM_INDEX_ENCODING is used to encode HtmlHelp index ( hhk), content ( hhc) +# The CHM_INDEX_ENCODING is used to encode HtmlHelp index (hhk), content (hhc) # and project file content. # This tag requires that the tag GENERATE_HTMLHELP is set to YES. CHM_INDEX_ENCODING = -# The BINARY_TOC flag controls whether a binary table of contents is generated ( -# YES) or a normal table of contents ( NO) in the .chm file. Furthermore it +# The BINARY_TOC flag controls whether a binary table of contents is generated +# (YES) or a normal table of contents (NO) in the .chm file. Furthermore it # enables the Previous and Next buttons. # The default value is: NO. # This tag requires that the tag GENERATE_HTMLHELP is set to YES. @@ -1354,47 +1500,48 @@ QCH_FILE = # The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help # Project output. For more information please see Qt Help Project / Namespace -# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace). +# (see: +# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#namespace). # The default value is: org.doxygen.Project. # This tag requires that the tag GENERATE_QHP is set to YES. QHP_NAMESPACE = org.doxygen.Project # The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt # Help Project output. For more information please see Qt Help Project / Virtual -# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual- -# folders). +# Folders (see: +# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#virtual-folders). # The default value is: doc. # This tag requires that the tag GENERATE_QHP is set to YES. QHP_VIRTUAL_FOLDER = doc # If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom # filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- -# filters). +# Filters (see: +# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom-filters). # This tag requires that the tag GENERATE_QHP is set to YES. QHP_CUST_FILTER_NAME = # The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the # custom filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- -# filters). +# Filters (see: +# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom-filters). # This tag requires that the tag GENERATE_QHP is set to YES. QHP_CUST_FILTER_ATTRS = # The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this # project's filter section matches. Qt Help Project / Filter Attributes (see: -# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes). +# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#filter-attributes). # This tag requires that the tag GENERATE_QHP is set to YES. QHP_SECT_FILTER_ATTRS = -# The QHG_LOCATION tag can be used to specify the location of Qt's -# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the -# generated .qhp file. +# The QHG_LOCATION tag can be used to specify the location (absolute path +# including file name) of Qt's qhelpgenerator. If non-empty doxygen will try to +# run qhelpgenerator on the generated .qhp file. # This tag requires that the tag GENERATE_QHP is set to YES. QHG_LOCATION = @@ -1436,7 +1583,7 @@ DISABLE_INDEX = NO # index structure (just like the one that is generated for HTML Help). For this # to work a browser that supports JavaScript, DHTML, CSS and frames is required # (i.e. any modern browser). Windows users are probably better off using the -# HTML help feature. Via custom stylesheets (see HTML_EXTRA_STYLESHEET) one can +# HTML help feature. Via custom style sheets (see HTML_EXTRA_STYLESHEET) one can # further fine-tune the look of the index. As an example, the default style # sheet generated by doxygen has an example that shows how to put an image at # the root of the tree instead of the PROJECT_NAME. Since the tree basically has @@ -1464,13 +1611,24 @@ ENUM_VALUES_PER_LINE = 4 TREEVIEW_WIDTH = 250 -# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open links to +# If the EXT_LINKS_IN_WINDOW option is set to YES, doxygen will open links to # external symbols imported via tag files in a separate window. # The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. EXT_LINKS_IN_WINDOW = NO +# If the HTML_FORMULA_FORMAT option is set to svg, doxygen will use the pdf2svg +# tool (see https://github.com/dawbarton/pdf2svg) or inkscape (see +# https://inkscape.org) to generate formulas as SVG images instead of PNGs for +# the HTML output. These images will generally look nicer at scaled resolutions. +# Possible values are: png (the default) and svg (looks nicer but requires the +# pdf2svg or inkscape tool). +# The default value is: png. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_FORMULA_FORMAT = png + # Use this tag to change the font size of LaTeX formulas included as images in # the HTML documentation. When you change the font size after a successful # doxygen run you need to manually remove any form_*.png images from the HTML @@ -1480,7 +1638,7 @@ EXT_LINKS_IN_WINDOW = NO FORMULA_FONTSIZE = 10 -# Use the FORMULA_TRANPARENT tag to determine whether or not the images +# Use the FORMULA_TRANSPARENT tag to determine whether or not the images # generated for formulas are transparent PNGs. Transparent PNGs are not # supported properly for IE 6.0, but are supported on all modern browsers. # @@ -1491,9 +1649,15 @@ FORMULA_FONTSIZE = 10 FORMULA_TRANSPARENT = YES +# The FORMULA_MACROFILE can contain LaTeX \newcommand and \renewcommand commands +# to create new LaTeX commands to be used in formulas as building blocks. See +# the section "Including formulas" for details. + +FORMULA_MACROFILE = + # Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see -# http://www.mathjax.org) which uses client side Javascript for the rendering -# instead of using prerendered bitmaps. Use this if you do not have LaTeX +# https://www.mathjax.org) which uses client side JavaScript for the rendering +# instead of using pre-rendered bitmaps. Use this if you do not have LaTeX # installed or if you want to formulas look prettier in the HTML output. When # enabled you may also need to install MathJax separately and configure the path # to it using the MATHJAX_RELPATH option. @@ -1504,7 +1668,7 @@ USE_MATHJAX = NO # When MathJax is enabled you can set the default output format to be used for # the MathJax output. See the MathJax site (see: -# http://docs.mathjax.org/en/latest/output.html) for more details. +# http://docs.mathjax.org/en/v2.7-latest/output.html) for more details. # Possible values are: HTML-CSS (which is slower, but has the best # compatibility), NativeMML (i.e. MathML) and SVG. # The default value is: HTML-CSS. @@ -1519,8 +1683,8 @@ MATHJAX_FORMAT = HTML-CSS # MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax # Content Delivery Network so you can quickly see the result without installing # MathJax. However, it is strongly recommended to install a local copy of -# MathJax from http://www.mathjax.org before deployment. -# The default value is: http://cdn.mathjax.org/mathjax/latest. +# MathJax from https://www.mathjax.org before deployment. +# The default value is: https://cdn.jsdelivr.net/npm/mathjax@2. # This tag requires that the tag USE_MATHJAX is set to YES. MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest @@ -1534,7 +1698,8 @@ MATHJAX_EXTENSIONS = # The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces # of code that will be used on startup of the MathJax code. See the MathJax site -# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an +# (see: +# http://docs.mathjax.org/en/v2.7-latest/output.html) for more details. For an # example see the documentation. # This tag requires that the tag USE_MATHJAX is set to YES. @@ -1562,7 +1727,7 @@ MATHJAX_CODEFILE = SEARCHENGINE = NO # When the SERVER_BASED_SEARCH tag is enabled the search engine will be -# implemented using a web server instead of a web client using Javascript. There +# implemented using a web server instead of a web client using JavaScript. There # are two flavors of web server based searching depending on the EXTERNAL_SEARCH # setting. When disabled, doxygen will generate a PHP script for searching and # an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing @@ -1579,9 +1744,10 @@ SERVER_BASED_SEARCH = NO # external search engine pointed to by the SEARCHENGINE_URL option to obtain the # search results. # -# Doxygen ships with an example indexer ( doxyindexer) and search engine +# Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). +# Xapian (see: +# https://xapian.org/). # # See the section "External Indexing and Searching" for details. # The default value is: NO. @@ -1592,10 +1758,11 @@ EXTERNAL_SEARCH = NO # The SEARCHENGINE_URL should point to a search engine hosted by a web server # which will return the search results when EXTERNAL_SEARCH is enabled. # -# Doxygen ships with an example indexer ( doxyindexer) and search engine +# Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). See the section "External Indexing and -# Searching" for details. +# Xapian (see: +# https://xapian.org/). See the section "External Indexing and Searching" for +# details. # This tag requires that the tag SEARCHENGINE is set to YES. SEARCHENGINE_URL = @@ -1630,7 +1797,7 @@ EXTRA_SEARCH_MAPPINGS = # Configuration options related to the LaTeX output #--------------------------------------------------------------------------- -# If the GENERATE_LATEX tag is set to YES doxygen will generate LaTeX output. +# If the GENERATE_LATEX tag is set to YES, doxygen will generate LaTeX output. # The default value is: YES. GENERATE_LATEX = NO @@ -1646,22 +1813,36 @@ LATEX_OUTPUT = latex # The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be # invoked. # -# Note that when enabling USE_PDFLATEX this option is only used for generating -# bitmaps for formulas in the HTML output, but not in the Makefile that is -# written to the output directory. -# The default file is: latex. +# Note that when not enabling USE_PDFLATEX the default is latex when enabling +# USE_PDFLATEX the default is pdflatex and when in the later case latex is +# chosen this is overwritten by pdflatex. For specific output languages the +# default can have been set differently, this depends on the implementation of +# the output language. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_CMD_NAME = latex # The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate # index for LaTeX. +# Note: This tag is used in the Makefile / make.bat. +# See also: LATEX_MAKEINDEX_CMD for the part in the generated output file +# (.tex). # The default file is: makeindex. # This tag requires that the tag GENERATE_LATEX is set to YES. MAKEINDEX_CMD_NAME = makeindex -# If the COMPACT_LATEX tag is set to YES doxygen generates more compact LaTeX +# The LATEX_MAKEINDEX_CMD tag can be used to specify the command name to +# generate index for LaTeX. In case there is no backslash (\) as first character +# it will be automatically added in the LaTeX code. +# Note: This tag is used in the generated output file (.tex). +# See also: MAKEINDEX_CMD_NAME for the part in the Makefile / make.bat. +# The default value is: makeindex. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_MAKEINDEX_CMD = makeindex + +# If the COMPACT_LATEX tag is set to YES, doxygen generates more compact LaTeX # documents. This may be useful for small projects and may help to save some # trees in general. # The default value is: NO. @@ -1679,9 +1860,12 @@ COMPACT_LATEX = NO PAPER_TYPE = a4 # The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names -# that should be included in the LaTeX output. To get the times font for -# instance you can specify -# EXTRA_PACKAGES=times +# that should be included in the LaTeX output. The package can be specified just +# by its name or with the correct syntax as to be used with the LaTeX +# \usepackage command. To get the times font for instance you can specify : +# EXTRA_PACKAGES=times or EXTRA_PACKAGES={times} +# To use the option intlimits with the amsmath package you can specify: +# EXTRA_PACKAGES=[intlimits]{amsmath} # If left blank no extra packages will be included. # This tag requires that the tag GENERATE_LATEX is set to YES. @@ -1696,9 +1880,9 @@ EXTRA_PACKAGES = # Note: Only use a user-defined header if you know what you are doing! The # following commands have a special meaning inside the header: $title, # $datetime, $date, $doxygenversion, $projectname, $projectnumber, -# $projectbrief, $projectlogo. Doxygen will replace $title with the empy string, -# for the replacement values of the other commands the user is referred to -# HTML_HEADER. +# $projectbrief, $projectlogo. Doxygen will replace $title with the empty +# string, for the replacement values of the other commands the user is referred +# to HTML_HEADER. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_HEADER = @@ -1714,6 +1898,17 @@ LATEX_HEADER = LATEX_FOOTER = +# The LATEX_EXTRA_STYLESHEET tag can be used to specify additional user-defined +# LaTeX style sheets that are included after the standard style sheets created +# by doxygen. Using this option one can overrule certain style aspects. Doxygen +# will copy the style sheet files to the output directory. +# Note: The order of the extra style sheet files is of importance (e.g. the last +# style sheet in the list overrules the setting of the previous ones in the +# list). +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_EXTRA_STYLESHEET = + # The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the LATEX_OUTPUT output # directory. Note that the files will be copied as-is; there are no commands or @@ -1731,9 +1926,11 @@ LATEX_EXTRA_FILES = PDF_HYPERLINKS = NO -# If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate -# the PDF file directly from the LaTeX files. Set this option to YES to get a -# higher quality PDF documentation. +# If the USE_PDFLATEX tag is set to YES, doxygen will use the engine as +# specified with LATEX_CMD_NAME to generate the PDF file directly from the LaTeX +# files. Set this option to YES, to get a higher quality PDF documentation. +# +# See also section LATEX_CMD_NAME for selecting the engine. # The default value is: YES. # This tag requires that the tag GENERATE_LATEX is set to YES. @@ -1767,17 +1964,33 @@ LATEX_SOURCE_CODE = NO # The LATEX_BIB_STYLE tag can be used to specify the style to use for the # bibliography, e.g. plainnat, or ieeetr. See -# http://en.wikipedia.org/wiki/BibTeX and \cite for more info. +# https://en.wikipedia.org/wiki/BibTeX and \cite for more info. # The default value is: plain. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_BIB_STYLE = plain +# If the LATEX_TIMESTAMP tag is set to YES then the footer of each generated +# page will contain the date and time when the page was generated. Setting this +# to NO can help when comparing the output of multiple runs. +# The default value is: NO. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_TIMESTAMP = NO + +# The LATEX_EMOJI_DIRECTORY tag is used to specify the (relative or absolute) +# path from which the emoji images will be read. If a relative path is entered, +# it will be relative to the LATEX_OUTPUT directory. If left blank the +# LATEX_OUTPUT directory will be used. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_EMOJI_DIRECTORY = + #--------------------------------------------------------------------------- # Configuration options related to the RTF output #--------------------------------------------------------------------------- -# If the GENERATE_RTF tag is set to YES doxygen will generate RTF output. The +# If the GENERATE_RTF tag is set to YES, doxygen will generate RTF output. The # RTF output is optimized for Word 97 and may not look too pretty with other RTF # readers/editors. # The default value is: NO. @@ -1792,7 +2005,7 @@ GENERATE_RTF = NO RTF_OUTPUT = rtf -# If the COMPACT_RTF tag is set to YES doxygen generates more compact RTF +# If the COMPACT_RTF tag is set to YES, doxygen generates more compact RTF # documents. This may be useful for small projects and may help to save some # trees in general. # The default value is: NO. @@ -1812,9 +2025,9 @@ COMPACT_RTF = NO RTF_HYPERLINKS = NO -# Load stylesheet definitions from file. Syntax is similar to doxygen's config -# file, i.e. a series of assignments. You only have to provide replacements, -# missing definitions are set to their default value. +# Load stylesheet definitions from file. Syntax is similar to doxygen's +# configuration file, i.e. a series of assignments. You only have to provide +# replacements, missing definitions are set to their default value. # # See also section "Doxygen usage" for information on how to generate the # default style sheet that doxygen normally uses. @@ -1823,17 +2036,27 @@ RTF_HYPERLINKS = NO RTF_STYLESHEET_FILE = # Set optional variables used in the generation of an RTF document. Syntax is -# similar to doxygen's config file. A template extensions file can be generated -# using doxygen -e rtf extensionFile. +# similar to doxygen's configuration file. A template extensions file can be +# generated using doxygen -e rtf extensionFile. # This tag requires that the tag GENERATE_RTF is set to YES. RTF_EXTENSIONS_FILE = +# If the RTF_SOURCE_CODE tag is set to YES then doxygen will include source code +# with syntax highlighting in the RTF output. +# +# Note that which sources are shown also depends on other settings such as +# SOURCE_BROWSER. +# The default value is: NO. +# This tag requires that the tag GENERATE_RTF is set to YES. + +RTF_SOURCE_CODE = NO + #--------------------------------------------------------------------------- # Configuration options related to the man page output #--------------------------------------------------------------------------- -# If the GENERATE_MAN tag is set to YES doxygen will generate man pages for +# If the GENERATE_MAN tag is set to YES, doxygen will generate man pages for # classes and files. # The default value is: NO. @@ -1877,7 +2100,7 @@ MAN_LINKS = NO # Configuration options related to the XML output #--------------------------------------------------------------------------- -# If the GENERATE_XML tag is set to YES doxygen will generate an XML file that +# If the GENERATE_XML tag is set to YES, doxygen will generate an XML file that # captures the structure of the code including all documentation. # The default value is: NO. @@ -1891,7 +2114,7 @@ GENERATE_XML = NO XML_OUTPUT = xml -# If the XML_PROGRAMLISTING tag is set to YES doxygen will dump the program +# If the XML_PROGRAMLISTING tag is set to YES, doxygen will dump the program # listings (including syntax highlighting and cross-referencing information) to # the XML output. Note that enabling this will significantly increase the size # of the XML output. @@ -1900,11 +2123,18 @@ XML_OUTPUT = xml XML_PROGRAMLISTING = YES +# If the XML_NS_MEMB_FILE_SCOPE tag is set to YES, doxygen will include +# namespace members in file scope as well, matching the HTML output. +# The default value is: NO. +# This tag requires that the tag GENERATE_XML is set to YES. + +XML_NS_MEMB_FILE_SCOPE = NO + #--------------------------------------------------------------------------- # Configuration options related to the DOCBOOK output #--------------------------------------------------------------------------- -# If the GENERATE_DOCBOOK tag is set to YES doxygen will generate Docbook files +# If the GENERATE_DOCBOOK tag is set to YES, doxygen will generate Docbook files # that can be used to generate PDF. # The default value is: NO. @@ -1918,23 +2148,23 @@ GENERATE_DOCBOOK = NO DOCBOOK_OUTPUT = docbook -# If the DOCBOOK_PROGRAMLISTING tag is set to YES doxygen will include the +# If the DOCBOOK_PROGRAMLISTING tag is set to YES, doxygen will include the # program listings (including syntax highlighting and cross-referencing # information) to the DOCBOOK output. Note that enabling this will significantly # increase the size of the DOCBOOK output. # The default value is: NO. # This tag requires that the tag GENERATE_DOCBOOK is set to YES. -# DOCBOOK_PROGRAMLISTING = NO +DOCBOOK_PROGRAMLISTING = NO #--------------------------------------------------------------------------- # Configuration options for the AutoGen Definitions output #--------------------------------------------------------------------------- -# If the GENERATE_AUTOGEN_DEF tag is set to YES doxygen will generate an AutoGen -# Definitions (see http://autogen.sf.net) file that captures the structure of -# the code including all documentation. Note that this feature is still -# experimental and incomplete at the moment. +# If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an +# AutoGen Definitions (see http://autogen.sourceforge.net/) file that captures +# the structure of the code including all documentation. Note that this feature +# is still experimental and incomplete at the moment. # The default value is: NO. GENERATE_AUTOGEN_DEF = NO @@ -1943,25 +2173,25 @@ GENERATE_AUTOGEN_DEF = NO # Configuration options related to the Perl module output #--------------------------------------------------------------------------- -# If the GENERATE_PERLMOD tag is set to YES doxygen will generate a Perl module +# If the GENERATE_PERLMOD tag is set to YES, doxygen will generate a Perl module # file that captures the structure of the code including all documentation. # # Note that this feature is still experimental and incomplete at the moment. # The default value is: NO. GENERATE_PERLMOD = NO -# If the PERLMOD_LATEX tag is set to YES doxygen will generate the necessary +# If the PERLMOD_LATEX tag is set to YES, doxygen will generate the necessary # Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI # output from the Perl module output. # The default value is: NO. # This tag requires that the tag GENERATE_PERLMOD is set to YES. PERLMOD_LATEX = NO -# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be nicely +# If the PERLMOD_PRETTY tag is set to YES, the Perl module output will be nicely # formatted so it can be parsed by a human reader. This is useful if you want to -# understand what is going on. On the other hand, if this tag is set to NO the +# understand what is going on. On the other hand, if this tag is set to NO, the # size of the Perl module output will be much smaller and Perl will parse it # just the same. # The default value is: YES. @@ -1981,14 +2211,14 @@ PERLMOD_MAKEVAR_PREFIX = # Configuration options related to the preprocessor #--------------------------------------------------------------------------- -# If the ENABLE_PREPROCESSING tag is set to YES doxygen will evaluate all +# If the ENABLE_PREPROCESSING tag is set to YES, doxygen will evaluate all # C-preprocessor directives found in the sources and include files. # The default value is: YES. ENABLE_PREPROCESSING = YES -# If the MACRO_EXPANSION tag is set to YES doxygen will expand all macro names -# in the source code. If set to NO only conditional compilation will be +# If the MACRO_EXPANSION tag is set to YES, doxygen will expand all macro names +# in the source code. If set to NO, only conditional compilation will be # performed. Macro expansion can be done in a controlled way by setting # EXPAND_ONLY_PREDEF to YES. # The default value is: NO. @@ -2004,7 +2234,7 @@ MACRO_EXPANSION = YES EXPAND_ONLY_PREDEF = YES -# If the SEARCH_INCLUDES tag is set to YES the includes files in the +# If the SEARCH_INCLUDES tag is set to YES, the include files in the # INCLUDE_PATH will be searched if a #include is found. # The default value is: YES. # This tag requires that the tag ENABLE_PREPROCESSING is set to YES. @@ -2087,20 +2317,21 @@ TAGFILES = GENERATE_TAGFILE = -# If the ALLEXTERNALS tag is set to YES all external class will be listed in the -# class index. If set to NO only the inherited external classes will be listed. +# If the ALLEXTERNALS tag is set to YES, all external class will be listed in +# the class index. If set to NO, only the inherited external classes will be +# listed. # The default value is: NO. ALLEXTERNALS = NO -# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed in -# the modules index. If set to NO, only the current project's groups will be +# If the EXTERNAL_GROUPS tag is set to YES, all external groups will be listed +# in the modules index. If set to NO, only the current project's groups will be # listed. # The default value is: YES. EXTERNAL_GROUPS = YES -# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed in +# If the EXTERNAL_PAGES tag is set to YES, all external pages will be listed in # the related pages index. If set to NO, only the current project's pages will # be listed. # The default value is: YES. @@ -2111,7 +2342,7 @@ EXTERNAL_PAGES = YES # Configuration options related to the dot tool #--------------------------------------------------------------------------- -# If the CLASS_DIAGRAMS tag is set to YES doxygen will generate a class diagram +# If the CLASS_DIAGRAMS tag is set to YES, doxygen will generate a class diagram # (in HTML and LaTeX) for classes with base or super classes. Setting the tag to # NO turns the diagrams off. Note that this option also works with HAVE_DOT # disabled, but it is recommended to install and use dot, since it yields more @@ -2127,7 +2358,7 @@ CLASS_DIAGRAMS = NO DIA_PATH = -# If set to YES, the inheritance and collaboration graphs will hide inheritance +# If set to YES the inheritance and collaboration graphs will hide inheritance # and usage relations if the target is undocumented or is not a class. # The default value is: YES. @@ -2200,7 +2431,7 @@ COLLABORATION_GRAPH = YES GROUP_GRAPHS = YES -# If the UML_LOOK tag is set to YES doxygen will generate inheritance and +# If the UML_LOOK tag is set to YES, doxygen will generate inheritance and # collaboration diagrams in a style similar to the OMG's Unified Modeling # Language. # The default value is: NO. @@ -2217,10 +2448,32 @@ UML_LOOK = NO # but if the number exceeds 15, the total amount of fields shown is limited to # 10. # Minimum value: 0, maximum value: 100, default value: 10. -# This tag requires that the tag HAVE_DOT is set to YES. +# This tag requires that the tag UML_LOOK is set to YES. UML_LIMIT_NUM_FIELDS = 10 +# If the DOT_UML_DETAILS tag is set to NO, doxygen will show attributes and +# methods without types and arguments in the UML graphs. If the DOT_UML_DETAILS +# tag is set to YES, doxygen will add type and arguments for attributes and +# methods in the UML graphs. If the DOT_UML_DETAILS tag is set to NONE, doxygen +# will not generate fields with class member information in the UML graphs. The +# class diagrams will look similar to the default class diagrams but using UML +# notation for the relationships. +# Possible values are: NO, YES and NONE. +# The default value is: NO. +# This tag requires that the tag UML_LOOK is set to YES. + +DOT_UML_DETAILS = NO + +# The DOT_WRAP_THRESHOLD tag can be used to set the maximum number of characters +# to display on a single line. If the actual line length exceeds this threshold +# significantly it will wrapped across multiple lines. Some heuristics are apply +# to avoid ugly line breaks. +# Minimum value: 0, maximum value: 1000, default value: 17. +# This tag requires that the tag HAVE_DOT is set to YES. + +DOT_WRAP_THRESHOLD = 17 + # If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and # collaboration graphs will show the relations between templates and their # instances. @@ -2252,7 +2505,8 @@ INCLUDED_BY_GRAPH = YES # # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable call graphs for selected -# functions only using the \callgraph command. +# functions only using the \callgraph command. Disabling a call graph can be +# accomplished by means of the command \hidecallgraph. # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2263,7 +2517,8 @@ CALL_GRAPH = NO # # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable caller graphs for selected -# functions only using the \callergraph command. +# functions only using the \callergraph command. Disabling a caller graph can be +# accomplished by means of the command \hidecallergraph. # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2286,13 +2541,17 @@ GRAPHICAL_HIERARCHY = YES DIRECTORY_GRAPH = YES # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images -# generated by dot. +# generated by dot. For an explanation of the image formats see the section +# output formats in the documentation of the dot tool (Graphviz (see: +# http://www.graphviz.org/)). # Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order # to make the SVG files visible in IE 9+ (other browsers do not have this # requirement). # Possible values are: png, png:cairo, png:cairo:cairo, png:cairo:gd, png:gd, # png:gd:gd, jpg, jpg:cairo, jpg:cairo:gd, jpg:gd, jpg:gd:gd, gif, gif:cairo, -# gif:cairo:gd, gif:gd, gif:gd:gd and svg. +# gif:cairo:gd, gif:gd, gif:gd:gd, svg, png:gd, png:gd:gd, png:cairo, +# png:cairo:gd, png:cairo:cairo, png:cairo:gdiplus, png:gdiplus and +# png:gdiplus:gdiplus. # The default value is: png. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2340,9 +2599,18 @@ DIAFILE_DIRS = # PlantUML is not used or called during a preprocessing step. Doxygen will # generate a warning when it encounters a \startuml command in this case and # will not generate output for the diagram. -# This tag requires that the tag HAVE_DOT is set to YES. -# PLANTUML_JAR_PATH = +PLANTUML_JAR_PATH = + +# When using plantuml, the PLANTUML_CFG_FILE tag can be used to specify a +# configuration file for plantuml. + +PLANTUML_CFG_FILE = + +# When using plantuml, the specified paths are searched for files specified by +# the !include statement in a plantuml block. + +PLANTUML_INCLUDE_PATH = # The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes # that will be shown in the graph. If the number of nodes in a graph becomes @@ -2380,7 +2648,7 @@ MAX_DOT_GRAPH_DEPTH = 1000 DOT_TRANSPARENT = YES -# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output +# Set the DOT_MULTI_TARGETS tag to YES to allow dot to generate multiple output # files in one run (i.e. multiple -o and -T options on the command line). This # makes dot run faster, but since only newer versions of dot (>1.8.10) support # this, this feature is disabled by default. @@ -2397,9 +2665,11 @@ DOT_MULTI_TARGETS = NO GENERATE_LEGEND = YES -# If the DOT_CLEANUP tag is set to YES doxygen will remove the intermediate dot +# If the DOT_CLEANUP tag is set to YES, doxygen will remove the intermediate # files that are used to generate the various graphs. +# +# Note: This setting is not only used for dot files but also for msc and +# plantuml temporary files. # The default value is: YES. -# This tag requires that the tag HAVE_DOT is set to YES. DOT_CLEANUP = YES -------------- This E-Mail was brought to you by github_commit_mail.py (Source: https://github.com/geany/infrastructure).

1 0

[geany/geany-osx] 36f838: Update mesonargs of gtk+-3.0
by Jiří Techet 30 Oct '21

30 Oct '21

Branch: refs/heads/master Author: Jiří Techet <techet(a)gmail.com> Committer: Jiří Techet <techet(a)gmail.com> Date: Fri, 29 Oct 2021 20:42:17 UTC Commit: 36f838f8e4d161a2abd37dc03caa21403de111bb https://github.com/geany/geany-osx/commit/36f838f8e4d161a2abd37dc03caa21403… Log Message: ----------- Update mesonargs of gtk+-3.0 Modified Paths: -------------- modulesets-stable/gtk-osx.modules Modified: modulesets-stable/gtk-osx.modules 2 lines changed, 1 insertions(+), 1 deletions(-) =================================================================== @@ -295,7 +295,7 @@  <meson id="gtk+-3.0" - mesonargs="-Dquartz-backend=true -Dx11-backend=false -Dmedia=none"> + mesonargs="-Dquartz_backend=true -Dx11_backend=false"> <branch module="gtk+/3.24/gtk+-3.24.30.tar.xz" version="3.24.30" hash="sha256:ba75bfff320ad1f4cfbee92ba813ec336322cc3c660d406aad014b07087a3ba9"> <patch file="Quartz-version-detection-for-macOS-12.patch" strip="1"/> -------------- This E-Mail was brought to you by github_commit_mail.py (Source: https://github.com/geany/infrastructure).

1 0

[geany/geany-osx] cabab4: Add the "patches" directory from gtk-osx
by Jiří Techet 30 Oct '21

30 Oct '21

Branch: refs/heads/master Author: Jiří Techet <techet(a)gmail.com> Committer: Jiří Techet <techet(a)gmail.com> Date: Fri, 29 Oct 2021 20:13:18 UTC Commit: cabab45d898b08058a8a773a3ed73842d13d60f7 https://github.com/geany/geany-osx/commit/cabab45d898b08058a8a773a3ed73842d… Log Message: ----------- Add the "patches" directory from gtk-osx Modified Paths: -------------- README.md patches/0001-Add-G_GNUC_PRINTF-on-all-functions-with-format-strin.patch patches/0001-Bug-571582-GtkSelection-implementation-for-quartz.patch patches/0001-Bug-667759-gtkdnd-quartz.c-is-missing-annotations-fo.patch patches/0001-Bug-670373-gtk2-modules-printing-cups-gtkprintbackendcups.patch patches/0001-Bug-670373-gtk3-modules-printing-cups-gtkprintbackendcups.patch patches/0001-Bug-702516-Make-Werror-format-nonliteral-happy.patch patches/0001-Bug-707945-GTK2-Quartz-typeahead-find-in-GtkTreeView.patch patches/0001-Bug-708998-Avoid-infinite-loop.patch patches/0001-Bug-709939-quartz-window-pos.patch patches/0001-Enable-use-of-XDG_DATA_DIRS-for-locating-iso-code-fi.patch patches/0001-Fix-DnD-Introspection-on-Quartz-Backend.patch patches/0001-Fix-relative-module-paths.patch patches/0001-Make-ATSUI-backend-compile-again.patch patches/0001-Patch-Orbit-2.14.19-to-master-for-current-GLib.patch patches/0001-Prevent-WebKitWebProcess-from-being-in-the-dock-or-p.patch patches/0001-Restore-gl_GLIBC21-to-configure-needed-for-libcharse.patch patches/0001-quartz-Fix-the-32-bits-build-on-MacOSX-10.7.patch patches/0001-scanner-split-CC-environment-variable.patch patches/0002-gtk2-Extract-reasons-and-reasons_desc-arrays-to-file-leve.patch patches/0002-gtk3-Extract-reasons-and-reasons_desc-arrays-to-file-leve.patch patches/0003-Fix-double-free-introduced-in-f86dc163.patch patches/0003-gtk2-Create-enum-PrinterStateLevel.patch patches/0003-gtk3-Create-enum-PrinterStateLevel.patch patches/0003-quartz-NULL-check-on-default-keymap.patch patches/0004-Bug-571582-GtkSelection-implementation-for-quartz.patch patches/0004-Ensure-src-and-dest-are-GdkWindows-in-_gdk_sythesize.patch patches/0004-gtk2-Extract-printer-setup-variables-into-a-struct.patch patches/0004-gtk3-Extract-printer-setup-variables-into-a-struct.patch patches/0005-gtk2-Extract-function-cups_printer_handle_attribute.patch patches/0005-gtk3-Extract-function-cups_printer_handle_attribute.patch patches/0006-Bug-658722-Drag-and-Drop-sometimes-stops-working.patch patches/0006-gtk2-Extract-Function-cups_create_printer.patch patches/0006-gtk3-Extract-Function-cups_create_printer.patch patches/0007-gtk2-Move-some-variable-declarations-into-the-scopes-in-w.patch patches/0007-gtk3-Move-some-variable-declarations-into-the-scopes-in-w.patch patches/0008-Bug-670373-gtk2-modules-printing-cups-gtkprintbackendcups.patch patches/0008-Bug-670373-gtk3-modules-printing-cups-gtkprintbackendcups.patch patches/0008-Implement-GtkDragSourceOwner-pasteboardChangedOwner.patch patches/0009-Bug-670373-gtk2-modules-printing-cups-gtkprintbackendcups.patch patches/0009-Bug-670373-gtk3-modules-printing-cups-gtkprintbackendcups.patch patches/Bug-555525-plug-ins-twain-tw_mac.c.patch patches/Bug-673403-replace-values_h.patch patches/Cairo-44584-llvm-no-flto.patch patches/Cairo-quartz-surface-create-internal.patch patches/GConf-characters.patch patches/Glade-3-8-Bug-663492-Update-Mac-integration-bindings-to-.patch patches/Glade-3-8-Mac-Integration-Fix-up-menu-accelerators-for-Mac.patch patches/Glade-master-Bug-663492-Update-Mac-integration-bindings-to-.patch patches/Glade-master-Mac-Integration-Fix-up-menu-accelerators-for-Mac.patch patches/Gtk3-24-1-Handle-NULL-NSGraphicsContext-currentContext.patch patches/Gtk3-24-1-Update-GDK_OSX-versions-to-current-MacOS-release.patch patches/Gtk3-24-1-Use-NSGraphicsContext-CGContext-instead-of-graphicsP.patch patches/Gtk3-24-1-quartz-do-not-cache-the-screen-in-the-gdkmonitor.patch patches/Python3.6-stack-size-flag.patch patches/Quartz-version-detection-for-macOS-12.patch patches/WebKit-2.16.1-Bug-167343-wtf-unicode-UTF8.h.patch patches/WebKit-2.4.11-fixups.patch patches/WebKit2Gtk3-2.30.0-cumulative.patch patches/WebKit2Gtk3-2.30.1-Disable-AUDIT_TOKEN-for-Gtk-builds.patch patches/WebKit2Gtk3-2.30.1-Disable-WebKitGenericCueAPIEnabled.patch patches/WebKit2Gtk3-2.30.1-Extend-UNIX_DOMAIN_SOCKETS-precedence-over-Mac-and-Win.patch patches/WebKit2Gtk3-2.30.1-Fix-Socket-signal-defines-for-Darwin-and-maybe-BSD.patch patches/WebKit2Gtk3-2.30.1-Force-FindICU-instead-of-inserting-heade.patch patches/WebKit2Gtk3-2.30.2-GUniquePtrGtk.patch patches/WebKit2Gtk3-2.30.2-Prevent-WebKitWebProcess-from-being-in-.patch patches/WebKit2Gtk3-2.32.0-color-components-correct-math-header.patch patches/WebKit2Gtk3-2.32.0-cumulative.patch patches/Webkit-2.16-Fix-some-includes.patch patches/Webkit-2.16-build-without-OpenGL.patch patches/amtk-build-on-macOS.patch patches/bug-92264-webkit-bison-2.6.patch patches/cairo-freetype-font-variations.patch patches/cairo-image-refcount.patch patches/cairomm-Bug-100894-Cairomm-compile-failure-if-no-cairo-ft.patch patches/cmake-libnetwork.patch patches/delete-gnetworking.h.patch patches/devhelp-3-build-on-macOS.patch patches/devhelp-646962-variable-name.patch patches/devhelp-663789-gtkosxapplication.patch patches/enchant-env.patch patches/enchant-gsize.patch patches/faad2-2.7-ac-config-headers.patch patches/firefox78-rust-manifest-and-max-sdk.patch patches/freetype-2.5.3-ccexe_cflags.patch patches/freetype-install-name.patch patches/frodo-getopt-autotools.patch patches/gdk-pixbuf-loader-name.patch patches/gi_cairo_library_path.patch patches/girscanner-objc.patch patches/gjs-remove-js::CodeCoverage.patch patches/glade-1-18.patch patches/glade-3.22.1-xslproc.patch patches/glib-2.52-Fallback-to-CFStringGetCSTring-if-CFStringGetC.patch patches/glib-gint64-long-long.patch patches/glib-iconv.patch patches/glibmm-Bug-781947-Build-fails-on-MacOS-because-glib-doesn-t.patch patches/gnutls-yes-weak-imports.patch patches/gobject-introspection-625195-Fix-non-libtool-linker-flags-on-Darwin.patch patches/graphviz-remove-rpath.patch patches/gtk+-2-m4-creation.patch patches/gtk+-Bug-655065-Better-Fix.patch patches/gtk+-scale-absolute-value.patch patches/gtk-3.14-GDesktopAppInfo-not-implemented-on-Mac.patch patches/gtk-3.14-stylecontext-unnecessary-assert.patch patches/gtk-gimp-dnd-bug767091.patch patches/gtk-mac-integration-work-around-svg-locale-bug.patch patches/gtk-quartz-fix-pixelated-image-surfaces-in-retina-hidpi-.patch patches/gtk3-14-get-scale-factor.patch patches/gtk3-14-gtkdesktop.patch patches/gtk3-quartz-3-24-7-fixes.patch patches/gtkmm-3-bad-const-property-background.patch patches/gtksourceview-664511-gtkosxapplication.patch patches/gtksourceview3-664511-gtkosxapplication.patch patches/gtksourceview3-664679-backends.patch patches/gtkspell-3-install.sh-wrong-sh-path.patch patches/guild-shell.patch patches/guile-clocktime.patch patches/guile20-align-fix.patch patches/harfbuzz-kCTTypesetterOptionForcedEmbeddingLevel-Leopard.patch patches/itstool-config-python.patch patches/itstool-memory-management.patch patches/libgcrypt-cflags-for-cc-for-build.patch patches/libglade-gmodule.patch patches/libgpg-error-cflags-for-cc-for-build.patch patches/libnettle-cc-for-build-needs-cflags.patch patches/libnettle-cc-for-build-return.patch patches/liboil-use-ac-config-headers-macro.patch patches/libsoup-python.patch patches/libtasn1-inline-fix.patch patches/libunique-663913-sockaddr-un.patch patches/libxml2.9.10-conditional-parentheses.patch patches/p11-kit-dirfd.patch patches/patch status patches/patch-bundle-link-webcore.diff patches/patch-webkit2gtk-2282-os-log-availability.diff patches/patch-webkit2gtk-2282-unprotected-egl-changes.diff patches/patch-webkit2gtk-272-macports.diff patches/patch-webkit2gtk-macports.diff patches/py2cairo-python2.6-Dont-try-to-guess-arch.patch patches/pygobject-gdesktopappinfo-missing.patch patches/pygtk-libtool.patch patches/pygtk-pango-decls.patch patches/pygtk-pango1.4x.patch patches/python-issue27806_v3.patch patches/python-ldflags.patch patches/python2-linkflags.patch patches/python2-test_grammar.py-typo.patch patches/python2-xcode-stubs.patch patches/ragel-6.9-setiosflags.patch patches/ragel-configure.in.patch patches/tiff-nohtml.patch patches/vasnprintf.patch patches/webkit-133293-cfi-clang-failure.patch patches/webkit-140167-disable-netscape-api.patch patches/webkit-2.16-No-stringview-lifetime.patch patches/webkit-2.16-main-thread.patch patches/webkit-clang-fixes.patch patches/webkit-disable-apple-icu.patch patches/xmlto-allow-net-access.patch Modified: README.md 10 lines changed, 5 insertions(+), 5 deletions(-) =================================================================== @@ -29,11 +29,11 @@ A brief description of the contents of the project directory: * *Papirus, Papirus-Dark*: Papirus GTK 3 icon theme with lots of unneeded icons removed to save space. * *iconbuilder.iconset*: source Geany icons for the bundle. -* *modulesets-stable*: copy of the modulesets-stable directory from - the [gtk-osx](https://gitlab.gnome.org/GNOME/gtk-osx/) project containing - dependency specifications. Since the upstram project is in a constant - state of flux and fails to build frequently, this allows us to make - a snapshot of a working configuration for our build. +* *modulesets-stable, patches*: copy of the modulesets-stable and patches + directory from the [gtk-osx](https://gitlab.gnome.org/GNOME/gtk-osx/) + project containing dependency specifications. Since the upstram project + is sometimes in an unstable state, this allows us to make a snapshot of + a working configuration for our build. * *geany_patches*: various patches fixing dependencies to enable bundling. * *utils*: various utility scripts. Modified: patches/0001-Add-G_GNUC_PRINTF-on-all-functions-with-format-strin.patch 387 lines changed, 387 insertions(+), 0 deletions(-) =================================================================== @@ -0,0 +1,387 @@ +From 0955160e15ec303d4d3f6a56bd424c68a41b0a54 Mon Sep 17 00:00:00 2001 +From: Henrique Dante de Almeida <hdante(a)gmail.com> +Date: Sun, 13 Jan 2013 14:05:14 -0200 +Subject: [PATCH] Add G_GNUC_PRINTF on all functions with format strings + +This allows compilation with clang wihtout errors, even +when -Wformat-nonliteral is active (as long as there are +no real cases of non literal formatting). + +https://bugzilla.gnome.org/show_bug.cgi?id=691608 +--- + gio/gdbusauth.c | 1 + + gio/gdbusauthmechanismsha1.c | 1 + + gio/gdbusdaemon.c | 1 + + gio/gdbuserror.h | 4 ++-- + gio/gdbusmessage.c | 1 + + gio/gdbusmethodinvocation.h | 5 +++-- + gio/gsimpleasyncresult.h | 5 +++-- + gio/gtask.h | 2 +- + glib/gerror.c | 1 + + glib/gerror.h | 2 +- + glib/gmarkup.c | 2 ++ + glib/gmarkup.h | 2 +- + glib/gmessages.h | 4 ++-- + glib/gprintf.h | 8 ++++---- + glib/gstrfuncs.h | 3 ++- + glib/gstring.h | 6 ++++-- + glib/gutils.h | 3 ++- + glib/gvariant-parser.c | 4 ++++ + glib/tests/markup-escape.c | 1 + + glib/tests/string.c | 1 + + glib/tests/test-printf.c | 1 + + 21 files changed, 39 insertions(+), 19 deletions(-) + +diff --git a/gio/gdbusauth.c b/gio/gdbusauth.c +index 962a218..dd4cc2c 100644 +--- a/gio/gdbusauth.c ++++ b/gio/gdbusauth.c +@@ -46,6 +46,7 @@ + + #include "glibintl.h" + ++G_GNUC_PRINTF(1, 2) + static void + debug_print (const gchar *message, ...) + { +diff --git a/gio/gdbusauthmechanismsha1.c b/gio/gdbusauthmechanismsha1.c +index 4729208..5e8b6c0 100644 +--- a/gio/gdbusauthmechanismsha1.c ++++ b/gio/gdbusauthmechanismsha1.c +@@ -469,6 +469,7 @@ keyring_lookup_entry (const gchar *cookie_context, + } + + /* function for logging important events that the system administrator should take notice of */ ++G_GNUC_PRINTF(1, 2) + static void + _log (const gchar *message, + ...) +diff --git a/gio/gdbusdaemon.c b/gio/gdbusdaemon.c +index 35a724c..2393771 100644 +--- a/gio/gdbusdaemon.c ++++ b/gio/gdbusdaemon.c +@@ -1346,6 +1346,7 @@ handle_start_service_by_name (_GFreedesktopDBus *object, + return TRUE; + } + ++G_GNUC_PRINTF(5, 6) + static void + return_error (Client *client, GDBusMessage *message, + GQuark domain, +diff --git a/gio/gdbuserror.h b/gio/gdbuserror.h +index d32b928..c1d3e9c 100644 +--- a/gio/gdbuserror.h ++++ b/gio/gdbuserror.h +@@ -87,12 +87,12 @@ void g_dbus_error_set_dbus_error (GError **error, + const gchar *dbus_error_name, + const gchar *dbus_error_message, + const gchar *format, +- ...); ++ ...) G_GNUC_PRINTF(4, 5); + void g_dbus_error_set_dbus_error_valist (GError **error, + const gchar *dbus_error_name, + const gchar *dbus_error_message, + const gchar *format, +- va_list var_args); ++ va_list var_args) G_GNUC_PRINTF(4, 0); + gchar *g_dbus_error_encode_gerror (const GError *error); + + G_END_DECLS +diff --git a/gio/gdbusmessage.c b/gio/gdbusmessage.c +index ecbc033..9181029 100644 +--- a/gio/gdbusmessage.c ++++ b/gio/gdbusmessage.c +@@ -827,6 +827,7 @@ g_dbus_message_new_method_error_literal (GDBusMessage *method_call_message, + * + * Since: 2.26 + */ ++G_GNUC_PRINTF(3, 0) + GDBusMessage * + g_dbus_message_new_method_error_valist (GDBusMessage *method_call_message, + const gchar *error_name, +diff --git a/gio/gdbusmethodinvocation.h b/gio/gdbusmethodinvocation.h +index 9146b21..29cfe63 100644 +--- a/gio/gdbusmethodinvocation.h ++++ b/gio/gdbusmethodinvocation.h +@@ -55,12 +55,13 @@ void g_dbus_method_invocation_return_error (GDBusMetho + GQuark domain, + gint code, + const gchar *format, +- ...); ++ ...) G_GNUC_PRINTF(4, 5); + void g_dbus_method_invocation_return_error_valist (GDBusMethodInvocation *invocation, + GQuark domain, + gint code, + const gchar *format, +- va_list var_args); ++ va_list var_args) ++ G_GNUC_PRINTF(4, 0); + void g_dbus_method_invocation_return_error_literal (GDBusMethodInvocation *invocation, + GQuark domain, + gint code, +diff --git a/gio/gsimpleasyncresult.h b/gio/gsimpleasyncresult.h +index 6233369..1ea98f4 100644 +--- a/gio/gsimpleasyncresult.h ++++ b/gio/gsimpleasyncresult.h +@@ -110,7 +110,8 @@ void g_simple_async_result_set_error_va (GSimpleAsyncResult + GQuark domain, + gint code, + const char *format, +- va_list args); ++ va_list args) ++ G_GNUC_PRINTF(4, 0); + gboolean g_simple_async_result_is_valid (GAsyncResult *result, + GObject *source, + gpointer source_tag); +@@ -121,7 +122,7 @@ void g_simple_async_report_error_in_idle (GObject *object, + GQuark domain, + gint code, + const char *format, +- ...); ++ ...) G_GNUC_PRINTF(6, 7); + void g_simple_async_report_gerror_in_idle (GObject *object, + GAsyncReadyCallback callback, + gpointer user_data, +diff --git a/gio/gtask.h b/gio/gtask.h +index bb03226..d5a2d77 100644 +--- a/gio/gtask.h ++++ b/gio/gtask.h +@@ -61,7 +61,7 @@ void g_task_report_new_error (gpointer source_object, + GQuark domain, + gint code, + const char *format, +- ...); ++ ...) G_GNUC_PRINTF(7, 8); + + GLIB_AVAILABLE_IN_2_36 + void g_task_set_task_data (GTask *task, +diff --git a/glib/gerror.c b/glib/gerror.c +index e6ce3c0..2adbdf8 100644 +--- a/glib/gerror.c ++++ b/glib/gerror.c +@@ -645,6 +645,7 @@ g_clear_error (GError **err) + } + } + ++G_GNUC_PRINTF(2, 0) + static void + g_error_add_prefix (gchar **string, + const gchar *format, +diff --git a/glib/gerror.h b/glib/gerror.h +index f9020d6..8b5de28 100644 +--- a/glib/gerror.h ++++ b/glib/gerror.h +@@ -60,7 +60,7 @@ GError* g_error_new_literal (GQuark domain, + GError* g_error_new_valist (GQuark domain, + gint code, + const gchar *format, +- va_list args); ++ va_list args) G_GNUC_PRINTF(3, 0); + + void g_error_free (GError *error); + GError* g_error_copy (const GError *error); +diff --git a/glib/gmarkup.c b/glib/gmarkup.c +index 11f68de..bf7c008 100644 +--- a/glib/gmarkup.c ++++ b/glib/gmarkup.c +@@ -403,6 +403,7 @@ set_error_literal (GMarkupParseContext *context, + g_propagate_error (error, tmp_error); + } + ++G_GNUC_PRINTF(4, 5) + static void + set_error (GMarkupParseContext *context, + GError **error, +@@ -564,6 +565,7 @@ utf8_str (const gchar *utf8, + return buf; + } + ++G_GNUC_PRINTF(5, 6) + static void + set_unescape_error (GMarkupParseContext *context, + GError **error, +diff --git a/glib/gmarkup.h b/glib/gmarkup.h +index d26c2ad..d0eda4f 100644 +--- a/glib/gmarkup.h ++++ b/glib/gmarkup.h +@@ -214,7 +214,7 @@ gchar* g_markup_escape_text (const gchar *text, + gchar *g_markup_printf_escaped (const char *format, + ...) G_GNUC_PRINTF (1, 2); + gchar *g_markup_vprintf_escaped (const char *format, +- va_list args); ++ va_list args) G_GNUC_PRINTF(1, 0); + + typedef enum + { +diff --git a/glib/gmessages.h b/glib/gmessages.h +index 777cda2..d0c1930 100644 +--- a/glib/gmessages.h ++++ b/glib/gmessages.h +@@ -46,7 +46,7 @@ G_BEGIN_DECLS + /* calculate a string size, guaranteed to fit format + args. + */ + gsize g_printf_string_upper_bound (const gchar* format, +- va_list args); ++ va_list args) G_GNUC_PRINTF(1, 0); + + /* Log level shift offset for user defined + * log levels (0-7 are used by GLib). +@@ -101,7 +101,7 @@ void g_log (const gchar *log_domain, + void g_logv (const gchar *log_domain, + GLogLevelFlags log_level, + const gchar *format, +- va_list args); ++ va_list args) G_GNUC_PRINTF(3, 0); + GLogLevelFlags g_log_set_fatal_mask (const gchar *log_domain, + GLogLevelFlags fatal_mask); + GLogLevelFlags g_log_set_always_fatal (GLogLevelFlags fatal_mask); +diff --git a/glib/gprintf.h b/glib/gprintf.h +index d96870f..2ed5ecc 100644 +--- a/glib/gprintf.h ++++ b/glib/gprintf.h +@@ -36,16 +36,16 @@ gint g_sprintf (gchar *string, + ...) G_GNUC_PRINTF (2, 3); + + gint g_vprintf (gchar const *format, +- va_list args); ++ va_list args) G_GNUC_PRINTF(1, 0); + gint g_vfprintf (FILE *file, + gchar const *format, +- va_list args); ++ va_list args) G_GNUC_PRINTF(2, 0); + gint g_vsprintf (gchar *string, + gchar const *format, +- va_list args); ++ va_list args) G_GNUC_PRINTF(2, 0); + gint g_vasprintf (gchar **string, + gchar const *format, +- va_list args); ++ va_list args) G_GNUC_PRINTF(2, 0); + + G_END_DECLS + +diff --git a/glib/gstrfuncs.h b/glib/gstrfuncs.h +index 3142485..e0752d3 100644 +--- a/glib/gstrfuncs.h ++++ b/glib/gstrfuncs.h +@@ -188,7 +188,8 @@ gchar* g_strdup (const gchar *str) G_GNUC_MALLOC; + gchar* g_strdup_printf (const gchar *format, + ...) G_GNUC_PRINTF (1, 2) G_GNUC_MALLOC; + gchar* g_strdup_vprintf (const gchar *format, +- va_list args) G_GNUC_MALLOC; ++ va_list args) G_GNUC_PRINTF(1, 0) ++ G_GNUC_MALLOC; + gchar* g_strndup (const gchar *str, + gsize n) G_GNUC_MALLOC; + gchar* g_strnfill (gsize length, +diff --git a/glib/gstring.h b/glib/gstring.h +index a97aa4e..c6a11ae 100644 +--- a/glib/gstring.h ++++ b/glib/gstring.h +@@ -109,13 +109,15 @@ GString* g_string_ascii_down (GString *string); + GString* g_string_ascii_up (GString *string); + void g_string_vprintf (GString *string, + const gchar *format, +- va_list args); ++ va_list args) ++ G_GNUC_PRINTF(2, 0); + void g_string_printf (GString *string, + const gchar *format, + ...) G_GNUC_PRINTF (2, 3); + void g_string_append_vprintf (GString *string, + const gchar *format, +- va_list args); ++ va_list args) ++ G_GNUC_PRINTF(2, 0); + void g_string_append_printf (GString *string, + const gchar *format, + ...) G_GNUC_PRINTF (2, 3); +diff --git a/glib/gutils.h b/glib/gutils.h +index 8102f53..6c21bf7 100644 +--- a/glib/gutils.h ++++ b/glib/gutils.h +@@ -187,7 +187,8 @@ gint g_snprintf (gchar *string, + gint g_vsnprintf (gchar *string, + gulong n, + gchar const *format, +- va_list args); ++ va_list args) ++ G_GNUC_PRINTF(3, 0); + + void g_nullify_pointer (gpointer *nullify_location); + +diff --git a/glib/gvariant-parser.c b/glib/gvariant-parser.c +index e2e85ab..d5c036a 100644 +--- a/glib/gvariant-parser.c ++++ b/glib/gvariant-parser.c +@@ -78,6 +78,7 @@ typedef struct + gint start, end; + } SourceRef; + ++G_GNUC_PRINTF(5, 0) + static void + parser_set_error_va (GError **error, + SourceRef *location, +@@ -105,6 +106,7 @@ parser_set_error_va (GError **error, + g_string_free (msg, TRUE); + } + ++G_GNUC_PRINTF(5, 6) + static void + parser_set_error (GError **error, + SourceRef *location, +@@ -130,6 +132,7 @@ typedef struct + } TokenStream; + + ++G_GNUC_PRINTF(5, 6) + static void + token_stream_set_error (TokenStream *stream, + GError **error, +@@ -525,6 +528,7 @@ ast_free (AST *ast) + ast->class->free (ast); + } + ++G_GNUC_PRINTF(5, 6) + static void + ast_set_error (AST *ast, + GError **error, +diff --git a/glib/tests/markup-escape.c b/glib/tests/markup-escape.c +index 0cd90ef..b2de289 100644 +--- a/glib/tests/markup-escape.c ++++ b/glib/tests/markup-escape.c +@@ -96,6 +96,7 @@ unichar_test (gconstpointer d) + escape_test (&t); + } + ++G_GNUC_PRINTF(1, 3) + static void + test_format (const gchar *format, + const gchar *expected, +diff --git a/glib/tests/string.c b/glib/tests/string.c +index 454574b..ba55d3d 100644 +--- a/glib/tests/string.c ++++ b/glib/tests/string.c +@@ -106,6 +106,7 @@ test_string_new (void) + g_string_free (string2, TRUE); + } + ++G_GNUC_PRINTF(2, 3) + static void + my_string_printf (GString *string, + const gchar *format, +diff --git a/glib/tests/test-printf.c b/glib/tests/test-printf.c +index 10d0a1d..dbfc8fc 100644 +--- a/glib/tests/test-printf.c ++++ b/glib/tests/test-printf.c +@@ -942,6 +942,7 @@ _Pragma ("GCC diagnostic pop") + #endif + } + ++G_GNUC_PRINTF(1, 2) + static gsize + upper_bound (const gchar *format, ...) + { +-- +1.7.10.4 + Modified: patches/0001-Bug-571582-GtkSelection-implementation-for-quartz.patch 875 lines changed, 875 insertions(+), 0 deletions(-) =================================================================== @@ -0,0 +1,875 @@ +From 7385087cae85e14bce61f8effba0f04aab070592 Mon Sep 17 00:00:00 2001 +From: John Ralls <jralls(a)ceridwen.us> +Date: Sun, 11 Sep 2011 16:08:22 -0700 +Subject: [PATCH] Bug 571582: GtkSelection implementation for quartz. + +--- + gdk/quartz/gdkselection-quartz.c | 22 +- + gtk/Makefile.am | 4 +- + gtk/gtkselection-quartz.c | 674 ++++++++++++++++++++++++++++++++++++++ + gtk/gtkselection.c | 14 +- + 4 files changed, 701 insertions(+), 13 deletions(-) + create mode 100644 gtk/gtkselection-quartz.c + +diff --git a/gdk/quartz/gdkselection-quartz.c b/gdk/quartz/gdkselection-quartz.c +index 3accf32..f6048c8 100644 +--- a/gdk/quartz/gdkselection-quartz.c ++++ b/gdk/quartz/gdkselection-quartz.c +@@ -32,7 +32,8 @@ _gdk_quartz_display_set_selection_owner (GdkDisplay *display, + guint32 time, + gint send_event) + { +- /* FIXME: Implement */ ++ g_warning ("Not a valid interface on Quartz. Use GtkSelection.\n"); ++ g_return_val_if_reached(TRUE); + return TRUE; + } + +@@ -40,7 +41,7 @@ GdkWindow* + _gdk_quartz_display_get_selection_owner (GdkDisplay *display, + GdkAtom selection) + { +- /* FIXME: Implement */ ++ /* Quartz doesn't have an X-selection, so it doesn't have a gdk_selection. */ + return NULL; + } + +@@ -51,7 +52,9 @@ _gdk_quartz_display_convert_selection (GdkDisplay *display, + GdkAtom target, + guint32 time) + { +- /* FIXME: Implement */ ++ g_warning ("Not a valid interface on Quartz. Use GtkSelection.\n"); ++ g_return_if_reached(); ++ + } + + gint +@@ -61,7 +64,8 @@ _gdk_quartz_display_get_selection_property (GdkDisplay *display, + GdkAtom *ret_type, + gint *ret_format) + { +- /* FIXME: Implement */ ++ g_warning ("Quartz windows do not support properties.\n"); ++ g_return_val_if_reached (-1); + return 0; + } + +@@ -69,8 +73,8 @@ gchar * + _gdk_quartz_display_utf8_to_string_target (GdkDisplay *display, + const gchar *str) + { +- /* FIXME: Implement */ +- return NULL; ++ /* UTF8 is the standard string on OSX */ ++ return g_strdup (str); + } + + static gint +@@ -90,7 +94,7 @@ make_list (const gchar *text, + while (p < text + length) + { + gchar *str; +- ++ + q = p; + while (*q && q < text + length) + q++; +@@ -123,6 +127,8 @@ make_list (const gchar *text, + if (list) + *list = g_new0 (gchar *, n_strings + 1); + ++ (*list)[n_strings] = NULL; ++ + i = n_strings; + tmp_list = strings; + while (tmp_list) +@@ -163,7 +169,7 @@ _gdk_quartz_display_text_property_to_utf8_list (GdkDisplay *display, + { + gchar *enc_name = gdk_atom_name (encoding); + +- g_warning ("gdk_text_property_to_utf8_list_for_display: encoding %s not handled\n", enc_name); ++ g_warning ("gdk_text_property_to_utf8_list: encoding %s not handled\n", enc_name); + g_free (enc_name); + + if (list) +diff --git a/gtk/Makefile.am b/gtk/Makefile.am +index 55d7f22..de81d57 100644 +--- a/gtk/Makefile.am ++++ b/gtk/Makefile.am +@@ -798,7 +798,9 @@ if USE_QUARTZ + gtk_clipboard_dnd_c_sources = \ + gtkclipboard-quartz.c \ + gtkdnd-quartz.c \ +- gtkquartz.c ++ gtkquartz.c \ ++ gtkselection-quartz.c ++ + gtk_clipboard_dnd_h_sources = gtkquartz.h + else + gtk_clipboard_dnd_c_sources = gtkclipboard.c gtkdnd.c +diff --git a/gtk/gtkselection-quartz.c b/gtk/gtkselection-quartz.c +new file mode 100644 +index 0000000..1e948ad +--- /dev/null ++++ b/gtk/gtkselection-quartz.c +@@ -0,0 +1,674 @@ ++/* GTK - The GIMP Toolkit ++ * Copyright (C) 1995-1997 Peter Mattis, Spencer Kimball and Josh MacDonald ++ * ++ * This library is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU Lesser General Public ++ * License as published by the Free Software Foundation; either ++ * version 2 of the License, or (at your option) any later version. ++ * ++ * This library is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ++ * Lesser General Public License for more details. ++ * ++ * You should have received a copy of the GNU Lesser General Public ++ * License along with this library; if not, write to the ++ * Free Software Foundation, Inc., 59 Temple Place - Suite 330, ++ * Boston, MA 02111-1307, USA. ++ */ ++ ++/* This file implements most of the work of the ICCCM selection protocol. ++ * The code was written after an intensive study of the equivalent part ++ * of John Ousterhout's Tk toolkit, and does many things in much the ++ * same way. ++ * ++ * The one thing in the ICCCM that isn't fully supported here (or in Tk) ++ * is side effects targets. For these to be handled properly, MULTIPLE ++ * targets need to be done in the order specified. This cannot be ++ * guaranteed with the way we do things, since if we are doing INCR ++ * transfers, the order will depend on the timing of the requestor. ++ * ++ * By Owen Taylor <owt1(a)cornell.edu> 8/16/97 ++ */ ++ ++/* Terminology note: when not otherwise specified, the term "incr" below ++ * refers to the _sending_ part of the INCR protocol. The receiving ++ * portion is referred to just as "retrieval". (Terminology borrowed ++ * from Tk, because there is no good opposite to "retrieval" in English. ++ * "send" can't be made into a noun gracefully and we're already using ++ * "emission" for something else ....) ++ */ ++ ++/* The MOTIF entry widget seems to ask for the TARGETS target, then ++ (regardless of the reply) ask for the TEXT target. It's slightly ++ possible though that it somehow thinks we are responding negatively ++ to the TARGETS request, though I don't really think so ... */ ++ ++/* ++ * Modified by the GTK+ Team and others 1997-2000. See the AUTHORS ++ * file for a list of people on the GTK+ Team. See the ChangeLog ++ * files for a list of changes. These files are distributed with ++ * GTK+ at ftp://ftp.gtk.org/pub/gtk/. ++ */ ++ ++#include "config.h" ++#include <stdarg.h> ++#include <string.h> ++#include "gdk.h" ++ ++#include "gtkmain.h" ++#include "gtkselection.h" ++#include "gtkselectionprivate.h" ++#include "gtktextbufferrichtext.h" ++#include "gtkintl.h" ++#include "gdk-pixbuf/gdk-pixbuf.h" ++#include "gtkclipboard.h" ++ ++#import <Cocoa/Cocoa.h> ++ ++#undef DEBUG_SELECTION ++/* ++ * DON'T USE THIS INTERFACE: USE GTKCLIPBOARD INSTEAD! ++ * ++ * This is the Quartz version of gtkselection. Unlike the other ++ * versions, it was written in 2010, after most code was rewritten to ++ * use GtkClipboard. Quartz, unlike X11, is not a remote-capable ++ * display system, so most of ICCCM is pointless. This implementation ++ * can therefore be much simpler than the X11 implementation. Text is ++ * a lot simpler, too. It's UTF8. No compound text, no legacy ++ * charsets. There's also only one display, so instead of passing it ++ * around, we'll generally just use gdk_display_get_default() when we ++ * need it. ++ * ++ * There are two constraints: The existing code in various GtkWidgets ++ * which uses GDK_SELECTION_CLIPBOARD (which gtkclipboard-quartz sets ++ * to generalPasteboard) for <ctrl>c copies and GDK_SELECTION_PRIMARY ++ * (for which gtkclipboard-quartz creates a separate pasteboard) for ++ * X-style selection transfers, and Apple's X11 Quartz implementation ++ * which by default puts both on the generalPasteboard. We need to ++ * operate with both. ++ * ++ * IMPORTANT: There is no X11 magic in quartz. If you insist on using ++ * this interface (and you really shouldn't), your MUST connect to ++ * selection-get, selection-received, and selection-clear-event for ++ * your widget. ++ */ ++ ++/* Maximum size of a sent chunk, in bytes. Also the default size of ++ our buffers */ ++ ++ ++#define IDLE_ABORT_TIME 30 ++ ++enum { ++ INCR, ++ MULTIPLE, ++ TARGETS, ++ TIMESTAMP, ++ SAVE_TARGETS, ++ LAST_ATOM ++}; ++ ++typedef struct _GtkSelectionInfo GtkSelectionInfo; ++ ++struct _GtkSelectionInfo ++{ ++ GdkAtom selection; ++ GtkWidget *owner; /* widget that owns selection */ ++ guint32 time; /* time used to acquire selection */ ++}; ++ ++ ++/* Local Functions */ ++static void gtk_selection_get_cb (GtkClipboard *clipboard, ++ GtkSelectionData *data, ++ guint info, ++ gpointer widget); ++static void gtk_selection_clear_cb (GtkClipboard *clipboard, ++ gpointer widget); ++static void gtk_selection_default_handler (GtkWidget *widget, ++ GtkSelectionData *data); ++static int gtk_selection_bytes_per_item (gint format); ++static GtkSelectionInfo *gtk_selection_info_get (GdkAtom selection); ++static void gtk_selection_info_remove (GdkAtom selection, ++ GtkWidget *owner); ++static void gtk_selection_info_append (GdkAtom selection, ++ GtkWidget *owner, ++ guint32 time); ++static void gtk_selection_info_clear (GtkWidget *owner); ++static GtkTargetList *gtk_selection_target_list_get (GtkWidget *widget, ++ GdkAtom selection); ++static void gtk_selection_target_list_remove (GtkWidget *widget); ++ ++/* Local Data */ ++static gint initialize = TRUE; ++static GList *current_selections = NULL; ++ ++static GdkAtom gtk_selection_atoms[LAST_ATOM]; ++static const char gtk_selection_handler_key[] = "gtk-selection-handlers"; ++ ++static GtkTargetEntry default_target = {"UTF8_STRING", 0, 1}; ++ ++/** ++ * gtk_selection_owner_set_for_display: ++ * @display: the #Gdkdisplay where the selection is set ++ * @widget: (allow-none): new selection owner (a #GdkWidget), or %NULL. ++ * @selection: an interned atom representing the selection to claim. ++ * @time_: timestamp with which to claim the selection ++ * ++ * Claim ownership of a given selection for a particular widget, or, ++ * if @widget is %NULL, release ownership of the selection. ++ * ++ * Return value: TRUE if the operation succeeded ++ * ++ * Since: 2.2 ++ */ ++gboolean ++gtk_selection_owner_set_for_display (GdkDisplay *display, ++ GtkWidget *widget, ++ GdkAtom selection, ++ guint32 time) ++{ ++ GObject *old_owner; ++ GtkClipboard *clip = gtk_clipboard_get (selection); ++ GtkTargetEntry *targets = &default_target; ++ gint num_targets = 1; ++ GtkTargetList *tlist; ++ ++ g_return_val_if_fail (GDK_IS_DISPLAY (display), FALSE); ++ g_return_val_if_fail (selection != GDK_NONE, FALSE); ++ ++ old_owner = gtk_clipboard_get_owner (clip); ++ if (old_owner) ++ gtk_selection_info_remove (selection, GTK_WIDGET(old_owner)); ++ ++ if (widget == NULL) ++ return TRUE; ++ ++ g_return_val_if_fail (gtk_widget_get_display (widget) == display, FALSE); ++ ++ if ((tlist = gtk_selection_target_list_get (widget, selection)) != NULL) ++ targets = gtk_target_table_new_from_list (tlist, &num_targets); ++ ++ if (gtk_clipboard_set_with_owner (clip, targets, num_targets, ++ gtk_selection_get_cb, ++ gtk_selection_clear_cb, ++ G_OBJECT (widget))) ++ { ++ gtk_selection_info_append (selection, widget, GDK_CURRENT_TIME); ++ return TRUE; ++ } ++ return FALSE; ++} ++ ++ ++typedef struct _GtkSelectionTargetList GtkSelectionTargetList; ++ ++struct _GtkSelectionTargetList { ++ GdkAtom selection; ++ GtkTargetList *list; ++}; ++ ++/** ++ * gtk_selection_remove_all: ++ * @widget: a #GtkWidget ++ * ++ * Removes all handlers and unsets ownership of all ++ * selections for a widget. Called when widget is being ++ * destroyed. This function will not generally be ++ * called by applications. ++ **/ ++void ++gtk_selection_remove_all (GtkWidget *widget) ++{ ++ g_return_if_fail(widget == NULL || GTK_IS_WIDGET(widget)); ++ gtk_selection_info_clear (widget); ++ /* Remove all selection lists */ ++ gtk_selection_target_list_remove (widget); ++} ++ ++ ++/** ++ * gtk_selection_convert: ++ * @widget: The widget which acts as requestor ++ * @selection: Which selection to get ++ * @target: Form of information desired (e.g., STRING) ++ * @time_: Time of request (usually of triggering event) ++ In emergency, you could use #GDK_CURRENT_TIME ++ * ++ * Requests the contents of a selection. When received, ++ * a "selection-received" signal will be generated. ++ * ++ * Return value: %TRUE if requested succeeded. %FALSE if we could not process ++ * request. (e.g., there was already a request in process for ++ * this widget). ++ **/ ++gboolean ++gtk_selection_convert (GtkWidget *widget, ++ GdkAtom selection, ++ GdkAtom target, ++ guint32 time_) ++{ ++ GtkClipboard *clip = gtk_clipboard_get (selection); ++ GtkSelectionData *data; ++ ++ g_return_val_if_fail (GTK_IS_WIDGET (widget), FALSE); ++ g_return_val_if_fail (selection != GDK_NONE, FALSE); ++ ++ data = gtk_clipboard_wait_for_contents (clip, target); ++ if (data == NULL) ++ return FALSE; ++ ++ g_signal_emit_by_name (widget, "selection-received", data, time); ++ ++ return TRUE; ++} ++ ++ ++/** ++ * _gtk_selection_clear: ++ * @widget: a #GtkWidget ++ * @event: the event ++ * ++ * The default handler for the #GtkWidget::selection-clear-event ++ * signal. ++ * ++ * Return value: %TRUE if the event was handled, otherwise false ++ **/ ++gboolean ++_gtk_selection_clear (GtkWidget *widget, ++ GdkEventSelection *event) ++{ ++ gtk_selection_clear_targets (widget, event->selection); ++ return FALSE; ++} ++ ++ ++/************************************************************* ++ * _gtk_selection_request: ++ * Handler for "selection_request_event" ++ * arguments: ++ * widget: ++ * event: ++ * results: ++ *************************************************************/ ++ ++gboolean ++_gtk_selection_request (GtkWidget *widget, ++ GdkEventSelection *event) ++{ ++ g_print ("Selection Request Events should not occur in quartz\n"); ++ return TRUE; ++} ++ ++/************************************************************* ++ * _gtk_selection_incr_event: ++ * Called whenever an PropertyNotify event occurs for an ++ * GdkWindow with user_data == NULL. These will be notifications ++ * that a window we are sending the selection to via the ++ * INCR protocol has deleted a property and is ready for ++ * more data. ++ * ++ * arguments: ++ * window: the requestor window ++ * event: the property event structure ++ * ++ * results: ++ *************************************************************/ ++ ++gboolean ++_gtk_selection_incr_event (GdkWindow *window, ++ GdkEventProperty *event) ++{ ++ g_print ("Selection_INCR_Events should not occur in quartz\n"); ++ return TRUE; ++} ++ ++/************************************************************* ++ * _gtk_selection_notify: ++ * Handler for "selection-notify-event" signals on windows ++ * where a retrieval is currently in process. The selection ++ * owner has responded to our conversion request. ++ * arguments: ++ * widget: Widget getting signal ++ * event: Selection event structure ++ * info: Information about this retrieval ++ * results: ++ * was event handled? ++ *************************************************************/ ++ ++gboolean ++_gtk_selection_notify (GtkWidget *widget, ++ GdkEventSelection *event) ++{ ++ g_print ("Selection_Notifications should not occur in quartz\n"); ++ ++ return TRUE; ++} ++ ++/************************************************************* ++ * _gtk_selection_property_notify: ++ * Handler for "property-notify-event" signals on windows ++ * where a retrieval is currently in process. The selection ++ * owner has added more data. ++ * arguments: ++ * widget: Widget getting signal ++ * event: Property event structure ++ * info: Information about this retrieval ++ * results: ++ * was event handled? ++ *************************************************************/ ++ ++gboolean ++_gtk_selection_property_notify (GtkWidget *widget, ++ GdkEventProperty *event) ++{ ++ g_print ("Selection_Property_Notifications should not occur in quartz\n"); ++ return TRUE; ++} ++ ++ ++/************************************************************* ++ * gtk_selection_get_cb() ++ * @clipboard: The clipboard requesting the data ++ * @data: Pass to selection-get signal; handlers should put requested ++ * data in the structure pointed to. ++ * @info: DND uses this on Windows and X11. It can be ignored for ++ * normal selection use. ++ * @owner: The window to which the information request is sent; it's ++ * the owner set with gtk_selection_owner_set_for_display. ++ * ++ * Emits a signal to the owner window to fill in the provided data structure. ++ *************************************************************/ ++/* GtkClipboardGetFunc */ ++static void ++gtk_selection_get_cb (GtkClipboard* clipboard, ++ GtkSelectionData *data, ++ guint info, ++ gpointer owner) ++{ ++ GtkTargetList *target_list; ++ GtkWidget *widget = GTK_WIDGET (owner); ++ ++ ++ g_return_if_fail (widget != NULL); ++ ++ target_list = gtk_selection_target_list_get (widget, data->selection); ++ ++ if ( data->target == gtk_selection_atoms[TIMESTAMP] || ++ data->target == gtk_selection_atoms[TARGETS] || ++ data->target == gtk_selection_atoms[SAVE_TARGETS]) ++ { ++ gtk_selection_default_handler (widget, data); ++ return; ++ } ++ if (target_list && ++ gtk_target_list_find (target_list, data->target, &info)) ++ { ++ g_signal_emit_by_name (widget, ++ "selection-get", ++ data, ++ info, time); ++ } ++} ++ ++static void ++gtk_selection_clear_cb (GtkClipboard* clipboard, ++ gpointer owner) ++{ ++ GtkWidget *widget = GTK_WIDGET (owner); ++ GdkEventSelection event; ++ event.type = GDK_SELECTION_CLEAR; ++ event.selection = GDK_SELECTION_PRIMARY; ++ event.window = gtk_widget_get_window(widget); ++ g_signal_emit_by_name (widget, ++ "selection-clear-event", ++ &event, ++ NULL); ++} ++ ++/************************************************************* ++ * gtk_selection_default_handler: ++ * Handles some default targets that exist for any widget ++ * If it can't fit results into buffer, returns -1. This ++ * won't happen in any conceivable case, since it would ++ * require 1000 selection targets! ++ * ++ * arguments: ++ * widget: selection owner ++ * data: selection data [INOUT] ++ * ++ *************************************************************/ ++ ++static void ++gtk_selection_default_handler (GtkWidget *widget, ++ GtkSelectionData *data) ++{ ++ if (data->target == gtk_selection_atoms[TIMESTAMP]) ++ { ++ /* Time which was used to obtain selection */ ++ GList *tmp_list; ++ GtkSelectionInfo *selection_info; ++ ++ tmp_list = current_selections; ++ while (tmp_list) ++ { ++ selection_info = (GtkSelectionInfo *)tmp_list->data; ++ if ((selection_info->owner == widget) && ++ (selection_info->selection == data->selection)) ++ { ++ gulong time = selection_info->time; ++ ++ gtk_selection_data_set (data, ++ GDK_SELECTION_TYPE_INTEGER, ++ 32, ++ (guchar *)&time, ++ sizeof (time)); ++ return; ++ } ++ ++ tmp_list = tmp_list->next; ++ } ++ ++ data->length = -1; ++ } ++ else if (data->target == gtk_selection_atoms[TARGETS]) ++ { ++ /* List of all targets supported for this widget/selection pair */ ++ GdkAtom *p; ++ guint count; ++ GList *tmp_list; ++ GtkTargetList *target_list; ++ GtkTargetPair *pair; ++ ++ target_list = gtk_selection_target_list_get (widget, ++ data->selection); ++ count = g_list_length (target_list->list) + 3; ++ ++ data->type = GDK_SELECTION_TYPE_ATOM; ++ data->format = 32; ++ data->length = count * sizeof (GdkAtom); ++ ++ /* selection data is always terminated by a trailing \0 ++ */ ++ p = g_malloc (data->length + 1); ++ data->data = (guchar *)p; ++ data->data[data->length] = '\0'; ++ ++ *p++ = gtk_selection_atoms[TIMESTAMP]; ++ *p++ = gtk_selection_atoms[TARGETS]; ++ *p++ = gtk_selection_atoms[MULTIPLE]; ++ ++ tmp_list = target_list->list; ++ while (tmp_list) ++ { ++ pair = (GtkTargetPair *)tmp_list->data; ++ *p++ = pair->target; ++ ++ tmp_list = tmp_list->next; ++ } ++ } ++ else if (data->target == gtk_selection_atoms[SAVE_TARGETS]) ++ { ++ gtk_selection_data_set (data, ++ gdk_atom_intern_static_string ("NULL"), ++ 32, NULL, 0); ++ } ++ else ++ { ++ data->length = -1; ++ } ++} ++ ++static GtkSelectionInfo * ++gtk_selection_info_get (GdkAtom selection) ++{ ++ GList *tmp_list; ++ GList *next; ++ GtkSelectionInfo *selection_info; ++ ++ tmp_list = current_selections; ++ while (tmp_list) ++ { ++ next = tmp_list->next; ++ selection_info = (GtkSelectionInfo *)tmp_list->data; ++ ++ if (selection_info->selection == selection) ++ { ++ return selection_info; ++ } ++ ++ tmp_list = next; ++ } ++ return NULL; ++} ++ ++static void ++gtk_selection_info_remove (GdkAtom selection, GtkWidget *owner) ++{ ++ GList *tmp_list; ++ GList *next; ++ GtkSelectionInfo *selection_info; ++ ++ g_return_if_fail (GTK_IS_WIDGET (owner)); ++ ++ tmp_list = current_selections; ++ while (tmp_list) ++ { ++ next = tmp_list->next; ++ selection_info = (GtkSelectionInfo *)tmp_list->data; ++ ++ if (selection_info->selection == selection && ++ selection_info->owner == owner) ++ { ++ /* Clear the clipboard; this will send a changedOwner to the ++ pasteboard so that it won't try to retrieve the ++ still-pending types later when the window isn't around to ++ provide them. */ ++ GtkClipboard *clip = gtk_clipboard_get(selection_info->selection); ++ gtk_clipboard_clear(clip); ++ current_selections = g_list_remove_link (current_selections, ++ tmp_list); ++ g_list_free (tmp_list); ++ g_slice_free (GtkSelectionInfo, selection_info); ++ return; ++ } ++ ++ tmp_list = next; ++ } ++} ++static void ++gtk_selection_info_append (GdkAtom selection, GtkWidget *owner, guint32 time) ++{ ++ GtkSelectionInfo *selection_info; ++ ++ g_return_if_fail (GTK_IS_WIDGET (owner)); ++ ++ selection_info = g_slice_new (GtkSelectionInfo); ++ selection_info->selection = selection; ++ selection_info->owner = owner; ++ selection_info->time = time; ++ current_selections = g_list_prepend (current_selections, ++ selection_info); ++} ++ ++static void ++gtk_selection_info_clear (GtkWidget *owner) ++{ ++ GList *tmp_list; ++ GList *next; ++ GtkSelectionInfo *selection_info; ++ ++ g_return_if_fail (GTK_IS_WIDGET (owner)); ++ ++ tmp_list = current_selections; ++ while (tmp_list) ++ { ++ next = tmp_list->next; ++ selection_info = (GtkSelectionInfo *)tmp_list->data; ++ ++ if (selection_info->owner == owner) ++ { ++ current_selections = g_list_remove_link (current_selections, ++ tmp_list); ++ g_list_free (tmp_list); ++ g_slice_free (GtkSelectionInfo, selection_info); ++ } ++ ++ tmp_list = next; ++ } ++} ++ ++static GtkTargetList * ++gtk_selection_target_list_get (GtkWidget *widget, ++ GdkAtom selection) ++{ ++ GtkSelectionTargetList *sellist; ++ GList *tmp_list; ++ GList *lists; ++ ++ lists = g_object_get_data (G_OBJECT (widget), gtk_selection_handler_key); ++ ++ tmp_list = lists; ++ while (tmp_list) ++ { ++ sellist = tmp_list->data; ++ if (sellist->selection == selection) ++ return sellist->list; ++ tmp_list = tmp_list->next; ++ } ++ ++ sellist = g_slice_new (GtkSelectionTargetList); ++ sellist->selection = selection; ++ sellist->list = gtk_target_list_new (NULL, 0); ++ ++ lists = g_list_prepend (lists, sellist); ++ g_object_set_data (G_OBJECT (widget), I_(gtk_selection_handler_key), lists); ++ ++ return sellist->list; ++} ++ ++static void ++gtk_selection_target_list_remove (GtkWidget *widget) ++{ ++ GtkSelectionTargetList *sellist; ++ GList *tmp_list; ++ GList *lists; ++ ++ lists = g_object_get_data (G_OBJECT (widget), gtk_selection_handler_key); ++ ++ tmp_list = lists; ++ while (tmp_list) ++ { ++ sellist = tmp_list->data; ++ ++ gtk_target_list_unref (sellist->list); ++ ++ g_slice_free (GtkSelectionTargetList, sellist); ++ tmp_list = tmp_list->next; ++ } ++ ++ g_list_free (lists); ++ g_object_set_data (G_OBJECT (widget), I_(gtk_selection_handler_key), NULL); ++} ++ +diff --git a/gtk/gtkselection.c b/gtk/gtkselection.c +index 9e2295f..77bb934 100644 +--- a/gtk/gtkselection.c ++++ b/gtk/gtkselection.c +@@ -661,6 +661,7 @@ gtk_target_table_free (GtkTargetEntry *targets, + g_free (targets); + } + ++#ifndef GDK_WINDOWING_QUARTZ /* Quartz handled by gtkselection-quartz.c */ + /** + * gtk_selection_owner_set_for_display: + * @display: the #Gdkdisplay where the selection is set +@@ -763,7 +764,7 @@ gtk_selection_owner_set_for_display (GdkDisplay *display, + else + return FALSE; + } +- ++#endif /* GDK_WINDOWING_QUARTZ */ + /** + * gtk_selection_owner_set: + * @widget: (allow-none): a #GtkWidget, or %NULL. +@@ -965,7 +966,7 @@ gtk_selection_add_targets (GtkWidget *widget, + #endif + } + +- ++#ifndef GDK_WINDOWING_QUARTZ /* Quartz is handled in gtkselection-quartz.c */ + /** + * gtk_selection_remove_all: + * @widget: a #GtkWidget +@@ -1026,8 +1027,9 @@ gtk_selection_remove_all (GtkWidget *widget) + /* Remove all selection lists */ + gtk_selection_target_list_remove (widget); + } ++#endif /* GDK_WINDOWING_QUARTZ */ + +- ++#ifndef GDK_WINDOWING_QUARTZ /* Quartz is handled in gtkselection-quartz.c */ + /** + * gtk_selection_convert: + * @widget: The widget which acts as requestor +@@ -1138,7 +1140,7 @@ gtk_selection_convert (GtkWidget *widget, + + return TRUE; + } +- ++#endif /* GDK_WINDOWING_QUARTZ */ + /** + * gtk_selection_data_get_selection: + * @selection_data: a pointer to a #GtkSelectionData structure. +@@ -2232,6 +2234,7 @@ gtk_selection_init (void) + initialize = FALSE; + } + ++#ifndef GDK_WINDOWING_QUARTZ /* Quartz handled by gtkselection-quartz.c */ + /** + * _gtk_selection_clear: + * @widget: a #GtkWidget +@@ -2652,6 +2655,7 @@ _gtk_selection_incr_event (GdkWindow *window, + + return TRUE; + } ++#endif /* GDK_WINDOWING_QUARTZ */ + + /************************************************************* + * gtk_selection_incr_timeout: +@@ -2706,6 +2710,7 @@ gtk_selection_incr_timeout (GtkIncrInfo *info) + return retval; + } + ++#ifndef GDK_WINDOWING_QUARTZ /* Quartz handled by gtkselection-quartz.c */ + /************************************************************* + * _gtk_selection_notify: + * Handler for "selection-notify-event" signals on windows +@@ -2904,6 +2909,7 @@ _gtk_selection_property_notify (GtkWidget *widget, + + return TRUE; + } ++#endif /* GDK_WINDOWING_QUARTZ */ + + /************************************************************* + * gtk_selection_retrieval_timeout: +-- +1.7.6.3.dirty + Modified: patches/0001-Bug-667759-gtkdnd-quartz.c-is-missing-annotations-fo.patch 47 lines changed, 47 insertions(+), 0 deletions(-) =================================================================== @@ -0,0 +1,47 @@ +From 4aebe6d4f08297066b231eee7aa15d33d8dd6d98 Mon Sep 17 00:00:00 2001 +From: John Ralls <jralls(a)ceridwen.us> +Date: Fri, 3 May 2013 10:31:47 -0700 +Subject: [PATCH] Bug 667759 - gtkdnd-quartz.c is missing annotations for + introspection + +Work around this by introspecting gtkclipboard.c and gtkdnd.c instead +of the quartz alternatives. + +Note that this is temporary: The implementation of GdkSelection +will make the quartz alternatives unnecessary. See bug 571582. +--- + gtk/Makefile.am | 12 +++++++++++- + 1 file changed, 11 insertions(+), 1 deletion(-) + +diff --git a/gtk/Makefile.am b/gtk/Makefile.am +index 6e7bbf1..0b82797 100644 +--- a/gtk/Makefile.am ++++ b/gtk/Makefile.am +@@ -1313,13 +1313,23 @@ LDADDS = \ + $(GTK_DEP_LIBS) + + if HAVE_INTROSPECTION ++# The Quartz clipboard and dnd files aren't annotated for ++# introspection. Rather than copy the annotations over from the ++# regular files, exclude the quartz ones: + introspection_files = \ +- $(filter-out %private.h gtktextdisplay.h gtktextlayout.h, $(gtkinclude_HEADERS) $(deprecatedinclude_HEADERS)) \ ++ $(filter-out %private.h gtktextdisplay.h gtktextlayout.h, $(gtkinclude_HEADERS) $(deprecatedinclude_HEADERS) gtkclipboard-quartz.c gtkdnd-quartz.c) \ + $(gtk_base_c_sources) \ + gtkprintoperation-unix.c \ + gtktypebuiltins.h \ + gtktypebuiltins.c + ++# And include the regular ones: ++if USE_QUARTZ ++introspection_files += \ ++ gtkclipboard.c \ ++ gtkdnd.c ++endif ++ + if USE_X11 + introspection_files += \ + gtksocket.c \ +-- +1.8.3.rc0 + Modified: patches/0001-Bug-670373-gtk2-modules-printing-cups-gtkprintbackendcups.patch 332 lines changed, 332 insertions(+), 0 deletions(-) =================================================================== @@ -0,0 +1,332 @@ +From bf8d9699ec228a8dd67c1bd1a84c38c398ba0b09 Mon Sep 17 00:00:00 2001 +From: John Ralls <jralls(a)ceridwen.us> +Date: Sat, 25 Feb 2012 17:43:18 -0800 +Subject: [PATCH 1/9] [Bug 670373] modules/printing/cups/gtkprintbackendcups.c + won't build with CUPS 1.6 + + The first, simple changes. Turns off the deprecation warnings and + substitutes macros and short ifdef blocks where feasible. +--- + configure.in | 6 + + modules/printbackends/cups/gtkprintbackendcups.c | 146 +++++++++++++--------- + 2 files changed, 93 insertions(+), 59 deletions(-) + +diff --git a/configure.in b/configure.in +index dff4588..288ad0c 100644 +--- a/configure.in ++++ b/configure.in +@@ -1473,6 +1473,12 @@ else + AC_DEFINE(HAVE_CUPS_API_1_2, 1, + [Define to 1 if CUPS 1.2 API is available]) + fi ++ if test $CUPS_API_MAJOR -gt 1 -o \ ++ $CUPS_API_MAJOR -eq 1 -a $CUPS_API_MINOR -ge 6; then ++ AC_DEFINE(HAVE_CUPS_API_1_6, 1, ++ [Define to 1 if CUPS 1.6 API is available]) ++ ++ fi + + AC_SUBST(CUPS_API_MAJOR) + AC_SUBST(CUPS_API_MINOR) +diff --git a/modules/printbackends/cups/gtkprintbackendcups.c b/modules/printbackends/cups/gtkprintbackendcups.c +index 59914ba..283a0ff 100644 +--- a/modules/printbackends/cups/gtkprintbackendcups.c ++++ b/modules/printbackends/cups/gtkprintbackendcups.c +@@ -30,6 +30,13 @@ + #include <sys/stat.h> + #include <stdlib.h> + #include <time.h> ++/* Cups 1.6 deprecates ppdFindAttr(), ppdFindCustomOption(), ++ * ppdFirstCustomParam(), and ppdNextCustomParam() among others. This ++ * turns off the warning so that it will compile. ++ */ ++#ifdef HAVE_CUPS_API_1_6 ++# define _PPD_DEPRECATED ++#endif + + #include <cups/cups.h> + #include <cups/language.h> +@@ -235,7 +242,22 @@ pb_module_create (void) + { + return gtk_print_backend_cups_new (); + } +- ++/* CUPS 1.6 Getter/Setter Functions CUPS 1.6 makes private most of the ++ * IPP structures and enforces access via new getter functions, which ++ * are unfortunately not available in earlier versions. We define ++ * below those getter functions as macros for use when building ++ * against earlier CUPS versions. ++ */ ++#ifndef HAVE_CUPS_API_1_6 ++#define ippGetOperation(ipp_request) ipp_request->request.op.operation_id ++#define ippGetInteger(attr, index) attr->values[index].integer ++#define ippGetBoolean(attr, index) attr->values[index].boolean ++#define ippGetString(attr, index, foo) attr->values[index].string.text ++#define ippGetValueTag(attr) attr->value_tag ++#define ippGetName(attr) attr->name ++#define ippGetCount(attr) attr->num_values ++#define ippGetGroupTag(attr) attr->group_tag ++#endif + /* + * GtkPrintBackendCups + */ +@@ -463,7 +485,7 @@ cups_print_cb (GtkPrintBackendCups *print_backend, + ipp_t *response = gtk_cups_result_get_response (result); + + if ((attr = ippFindAttribute (response, "job-id", IPP_TAG_INTEGER)) != NULL) +- job_id = attr->values[0].integer; ++ job_id = ippGetInteger (attr, 0); + + if (!gtk_print_job_get_track_print_status (ps->job) || job_id == 0) + gtk_print_job_set_status (ps->job, GTK_PRINT_STATUS_FINISHED); +@@ -900,7 +922,7 @@ request_password (gpointer data) + + dispatch->backend->authentication_lock = TRUE; + +- switch (dispatch->request->ipp_request->request.op.operation_id) ++ switch (ippGetOperation (dispatch->request->ipp_request)) + { + case IPP_PRINT_JOB: + if (job_title != NULL && printer_name != NULL) +@@ -928,7 +950,7 @@ request_password (gpointer data) + break; + default: + /* work around gcc warning about 0 not being a value for this enum */ +- if (dispatch->request->ipp_request->request.op.operation_id == 0) ++ if (ippGetOperation (dispatch->request->ipp_request) == 0) + prompt = g_strdup_printf ( _("Authentication is required to get a file from %s"), hostname); + else + prompt = g_strdup_printf ( _("Authentication is required on %s"), hostname); +@@ -1516,10 +1538,15 @@ cups_request_job_info_cb (GtkPrintBackendCups *print_backend, + } + + data->counter++; +- ++ + response = gtk_cups_result_get_response (result); + + state = 0; ++ ++#ifdef HAVE_CUPS_API_1_6 ++ attr = ippFindAttribute (response, "job-state", IPP_TAG_INTEGER); ++ state = ippGetInteger (attr, 0); ++#else + for (attr = response->attrs; attr != NULL; attr = attr->next) + { + if (!attr->name) +@@ -1527,7 +1554,8 @@ cups_request_job_info_cb (GtkPrintBackendCups *print_backend, + + _CUPS_MAP_ATTR_INT (attr, state, "job-state"); + } +- ++#endif ++ + done = FALSE; + switch (state) + { +@@ -1760,53 +1788,53 @@ cups_request_printer_list_cb (GtkPrintBackendCups *cups_backend, + gboolean is_accepting_jobs = TRUE; + gboolean default_printer = FALSE; + gboolean got_printer_type = FALSE; +- gchar *default_cover_before = NULL; +- gchar *default_cover_after = NULL; ++ const gchar *default_cover_before = NULL; ++ const gchar *default_cover_after = NULL; + gboolean remote_printer = FALSE; + gchar **auth_info_required = NULL; + + /* Skip leading attributes until we hit a printer... + */ +- while (attr != NULL && attr->group_tag != IPP_TAG_PRINTER) ++ while (attr != NULL && ippGetGroupTag (attr) != IPP_TAG_PRINTER) + attr = attr->next; + + if (attr == NULL) + break; + +- while (attr != NULL && attr->group_tag == IPP_TAG_PRINTER) ++ while (attr != NULL && ippGetGroupTag (attr) == IPP_TAG_PRINTER) + { +- if (strcmp (attr->name, "printer-name") == 0 && +- attr->value_tag == IPP_TAG_NAME) +- printer_name = attr->values[0].string.text; +- else if (strcmp (attr->name, "printer-uri-supported") == 0 && +- attr->value_tag == IPP_TAG_URI) +- printer_uri = attr->values[0].string.text; +- else if (strcmp (attr->name, "member-uris") == 0 && +- attr->value_tag == IPP_TAG_URI) +- member_uris = attr->values[0].string.text; +- else if (strcmp (attr->name, "printer-location") == 0) +- location = attr->values[0].string.text; +- else if (strcmp (attr->name, "printer-info") == 0) +- description = attr->values[0].string.text; +- else if (strcmp (attr->name, "printer-state-message") == 0) +- state_msg = attr->values[0].string.text; +- else if (strcmp (attr->name, "printer-state-reasons") == 0) ++ if (strcmp (ippGetName (attr), "printer-name") == 0 && ++ ippGetValueTag (attr) == IPP_TAG_NAME) ++ printer_name = ippGetString (attr, 0, NULL); ++ else if (strcmp (ippGetName (attr), "printer-uri-supported") == 0 && ++ ippGetValueTag (attr) == IPP_TAG_URI) ++ printer_uri = ippGetString (attr, 0, NULL); ++ else if (strcmp (ippGetName (attr), "member-uris") == 0 && ++ ippGetValueTag (attr) == IPP_TAG_URI) ++ member_uris = ippGetString (attr, 0, NULL); ++ else if (strcmp (ippGetName (attr), "printer-location") == 0) ++ location = ippGetString (attr, 0, NULL); ++ else if (strcmp (ippGetName (attr), "printer-info") == 0) ++ description = ippGetString (attr, 0, NULL); ++ else if (strcmp (ippGetName (attr), "printer-state-message") == 0) ++ state_msg = ippGetString (attr, 0, NULL); ++ else if (strcmp (ippGetName (attr), "printer-state-reasons") == 0) + /* Store most important reason to reason_msg and set + its importance at printer_state_reason_level */ + { +- for (i = 0; i < attr->num_values; i++) ++ for (i = 0; i < ippGetCount (attr); i++) + { +- if (strcmp (attr->values[i].string.text, "none") != 0) ++ if (strcmp (ippGetString (attr, i, NULL), "none") != 0) + { + /* Sets is_paused flag for paused printer. */ +- if (strcmp (attr->values[i].string.text, "paused") == 0) ++ if (strcmp (ippGetString (attr, i, NULL), "paused") == 0) + { + is_paused = TRUE; + } + + interested_in = FALSE; + for (j = 0; j < G_N_ELEMENTS (reasons); j++) +- if (strncmp (attr->values[i].string.text, reasons[j], strlen (reasons[j])) == 0) ++ if (strncmp (ippGetString (attr, i, NULL), reasons[j], strlen (reasons[j])) == 0) + { + interested_in = TRUE; + break; +@@ -1814,87 +1842,87 @@ cups_request_printer_list_cb (GtkPrintBackendCups *cups_backend, + + if (interested_in) + { +- if (g_str_has_suffix (attr->values[i].string.text, "-report")) ++ if (g_str_has_suffix (ippGetString (attr, i, NULL), "-report")) + { + if (printer_state_reason_level <= 1) + { +- reason_msg = attr->values[i].string.text; ++ reason_msg = ippGetString (attr, i, NULL); + printer_state_reason_level = 1; + } + } +- else if (g_str_has_suffix (attr->values[i].string.text, "-warning")) ++ else if (g_str_has_suffix (ippGetString (attr, i, NULL), "-warning")) + { + if (printer_state_reason_level <= 2) + { +- reason_msg = attr->values[i].string.text; ++ reason_msg = ippGetString (attr, i, NULL); + printer_state_reason_level = 2; +- } ++ } + } + else /* It is error in the case of no suffix. */ + { +- reason_msg = attr->values[i].string.text; ++ reason_msg = ippGetString (attr, i, NULL); + printer_state_reason_level = 3; + } + } + } + } + } +- else if (strcmp (attr->name, "printer-state") == 0) +- state = attr->values[0].integer; +- else if (strcmp (attr->name, "queued-job-count") == 0) +- job_count = attr->values[0].integer; +- else if (strcmp (attr->name, "printer-is-accepting-jobs") == 0) ++ else if (strcmp (ippGetName (attr), "printer-state") == 0) ++ state = ippGetInteger (attr, 0); ++ else if (strcmp (ippGetName (attr), "queued-job-count") == 0) ++ job_count = ippGetInteger (attr, 0); ++ else if (strcmp (ippGetName (attr), "printer-is-accepting-jobs") == 0) + { +- if (attr->values[0].boolean == 1) ++ if (ippGetBoolean (attr, 0) == 1) + is_accepting_jobs = TRUE; + else + is_accepting_jobs = FALSE; + } +- else if (strcmp (attr->name, "job-sheets-supported") == 0) ++ else if (strcmp (ippGetName (attr), "job-sheets-supported") == 0) + { + if (cups_backend->covers == NULL) + { +- cups_backend->number_of_covers = attr->num_values; ++ cups_backend->number_of_covers = ippGetCount (attr); + cups_backend->covers = g_new (char *, cups_backend->number_of_covers + 1); + for (i = 0; i < cups_backend->number_of_covers; i++) +- cups_backend->covers[i] = g_strdup (attr->values[i].string.text); ++ cups_backend->covers[i] = g_strdup (ippGetString (attr, i, NULL)); + cups_backend->covers[cups_backend->number_of_covers] = NULL; + } + } +- else if (strcmp (attr->name, "job-sheets-default") == 0) ++ else if (strcmp (ippGetName (attr), "job-sheets-default") == 0) + { +- if (attr->num_values == 2) ++ if (ippGetCount (attr) == 2) + { +- default_cover_before = attr->values[0].string.text; +- default_cover_after = attr->values[1].string.text; ++ default_cover_before = ippGetString (attr, 0, NULL); ++ default_cover_after = ippGetString (attr, 1, NULL); + } + } +- else if (strcmp (attr->name, "printer-type") == 0) ++ else if (strcmp (ippGetName (attr), "printer-type") == 0) + { + got_printer_type = TRUE; +- if (attr->values[0].integer & 0x00020000) ++ if (ippGetInteger (attr, 0) & 0x00020000) + default_printer = TRUE; + else + default_printer = FALSE; + +- if (attr->values[0].integer & 0x00000002) ++ if (ippGetInteger (attr, 0) & 0x00000002) + remote_printer = TRUE; + else + remote_printer = FALSE; + } +- else if (strcmp (attr->name, "auth-info-required") == 0) ++ else if (strcmp (ippGetName (attr), "auth-info-required") == 0) + { +- if (strcmp (attr->values[0].string.text, "none") != 0) ++ if (strcmp (ippGetString (attr, 0, NULL), "none") != 0) + { +- auth_info_required = g_new0 (gchar *, attr->num_values + 1); +- for (i = 0; i < attr->num_values; i++) +- auth_info_required[i] = g_strdup (attr->values[i].string.text); ++ auth_info_required = g_new0 (gchar *, ippGetCount (attr) + 1); ++ for (i = 0; i < ippGetCount (attr); i++) ++ auth_info_required[i] = g_strdup (ippGetString (attr, i, NULL)); + } + } + else + { + GTK_NOTE (PRINTING, +- g_print ("CUPS Backend: Attribute %s ignored", attr->name)); ++ g_print ("CUPS Backend: Attribute %s ignored", ippGetName (attr))); + } + + attr = attr->next; +@@ -2707,7 +2735,7 @@ cups_request_default_printer_cb (GtkPrintBackendCups *print_backend, + response = gtk_cups_result_get_response (result); + + if ((attr = ippFindAttribute (response, "printer-name", IPP_TAG_NAME)) != NULL) +- print_backend->default_printer = g_strdup (attr->values[0].string.text); ++ print_backend->default_printer = g_strdup (ippGetString (attr, 0, NULL)); + + print_backend->got_default_printer = TRUE; + +-- +1.7.7.5 (Apple Git-28) + Modified: patches/0001-Bug-670373-gtk3-modules-printing-cups-gtkprintbackendcups.patch 331 lines changed, 331 insertions(+), 0 deletions(-) =================================================================== @@ -0,0 +1,331 @@ +From 3c586545f528e18ef2a9fa9e2ff17fc369e3a38f Mon Sep 17 00:00:00 2001 +From: John Ralls <jralls(a)ceridwen.us> +Date: Sat, 18 Feb 2012 14:16:27 -0800 +Subject: [PATCH 1/9] [Bug 670373] modules/printing/cups/gtkprintbackendcups.c + won't build with CUPS 1.6 + +The first, simple changes. Turns off the deprecation warnings and substitutes macros and short ifdef blocks where feasible. +--- + configure.in | 6 + + modules/printbackends/cups/gtkprintbackendcups.c | 146 +++++++++++++--------- + 2 files changed, 93 insertions(+), 59 deletions(-) + +diff --git a/configure.in b/configure.in +index 75761d5..85c5960 100644 +--- a/configure.in ++++ b/configure.in +@@ -1473,6 +1473,12 @@ else + AC_DEFINE(HAVE_CUPS_API_1_2, 1, + [Define to 1 if CUPS 1.2 API is available]) + fi ++ if test $CUPS_API_MAJOR -gt 1 -o \ ++ $CUPS_API_MAJOR -eq 1 -a $CUPS_API_MINOR -ge 6; then ++ AC_DEFINE(HAVE_CUPS_API_1_6, 1, ++ [Define to 1 if CUPS 1.6 API is available]) ++ ++ fi + + AC_SUBST(CUPS_API_MAJOR) + AC_SUBST(CUPS_API_MINOR) +diff --git a/modules/printbackends/cups/gtkprintbackendcups.c b/modules/printbackends/cups/gtkprintbackendcups.c +index 79d66cd..12c6ab6 100644 +--- a/modules/printbackends/cups/gtkprintbackendcups.c ++++ b/modules/printbackends/cups/gtkprintbackendcups.c +@@ -30,6 +30,13 @@ + #include <sys/stat.h> + #include <stdlib.h> + #include <time.h> ++/* Cups 1.6 deprecates ppdFindAttr(), ppdFindCustomOption(), ++ * ppdFirstCustomParam(), and ppdNextCustomParam() among others. This ++ * turns off the warning so that it will compile. ++ */ ++#ifdef HAVE_CUPS_API_1_6 ++# define _PPD_DEPRECATED ++#endif + + #include <cups/cups.h> + #include <cups/language.h> +@@ -235,7 +242,22 @@ pb_module_create (void) + { + return gtk_print_backend_cups_new (); + } +- ++/* CUPS 1.6 Getter/Setter Functions CUPS 1.6 makes private most of the ++ * IPP structures and enforces access via new getter functions, which ++ * are unfortunately not available in earlier versions. We define ++ * below those getter functions as macros for use when building ++ * against earlier CUPS versions. ++ */ ++#ifndef HAVE_CUPS_API_1_6 ++#define ippGetOperation(ipp_request) ipp_request->request.op.operation_id ++#define ippGetInteger(attr, index) attr->values[index].integer ++#define ippGetBoolean(attr, index) attr->values[index].boolean ++#define ippGetString(attr, index, foo) attr->values[index].string.text ++#define ippGetValueTag(attr) attr->value_tag ++#define ippGetName(attr) attr->name ++#define ippGetCount(attr) attr->num_values ++#define ippGetGroupTag(attr) attr->group_tag ++#endif + /* + * GtkPrintBackendCups + */ +@@ -463,7 +485,7 @@ cups_print_cb (GtkPrintBackendCups *print_backend, + ipp_t *response = gtk_cups_result_get_response (result); + + if ((attr = ippFindAttribute (response, "job-id", IPP_TAG_INTEGER)) != NULL) +- job_id = attr->values[0].integer; ++ job_id = ippGetInteger (attr, 0); + + if (!gtk_print_job_get_track_print_status (ps->job) || job_id == 0) + gtk_print_job_set_status (ps->job, GTK_PRINT_STATUS_FINISHED); +@@ -900,7 +922,7 @@ request_password (gpointer data) + + dispatch->backend->authentication_lock = TRUE; + +- switch (dispatch->request->ipp_request->request.op.operation_id) ++ switch (ippGetOperation (dispatch->request->ipp_request)) + { + case IPP_PRINT_JOB: + if (job_title != NULL && printer_name != NULL) +@@ -928,7 +950,7 @@ request_password (gpointer data) + break; + default: + /* work around gcc warning about 0 not being a value for this enum */ +- if (dispatch->request->ipp_request->request.op.operation_id == 0) ++ if (ippGetOperation (dispatch->request->ipp_request) == 0) + prompt = g_strdup_printf ( _("Authentication is required to get a file from %s"), hostname); + else + prompt = g_strdup_printf ( _("Authentication is required on %s"), hostname); +@@ -1516,10 +1538,15 @@ cups_request_job_info_cb (GtkPrintBackendCups *print_backend, + } + + data->counter++; +- ++ + response = gtk_cups_result_get_response (result); + + state = 0; ++ ++#ifdef HAVE_CUPS_API_1_6 ++ attr = ippFindAttribute (response, "job-state", IPP_TAG_INTEGER); ++ state = ippGetInteger (attr, 0); ++#else + for (attr = response->attrs; attr != NULL; attr = attr->next) + { + if (!attr->name) +@@ -1527,7 +1554,8 @@ cups_request_job_info_cb (GtkPrintBackendCups *print_backend, + + _CUPS_MAP_ATTR_INT (attr, state, "job-state"); + } +- ++#endif ++ + done = FALSE; + switch (state) + { +@@ -1760,53 +1788,53 @@ cups_request_printer_list_cb (GtkPrintBackendCups *cups_backend, + gboolean is_accepting_jobs = TRUE; + gboolean default_printer = FALSE; + gboolean got_printer_type = FALSE; +- gchar *default_cover_before = NULL; +- gchar *default_cover_after = NULL; ++ const gchar *default_cover_before = NULL; ++ const gchar *default_cover_after = NULL; + gboolean remote_printer = FALSE; + gchar **auth_info_required = NULL; + + /* Skip leading attributes until we hit a printer... + */ +- while (attr != NULL && attr->group_tag != IPP_TAG_PRINTER) ++ while (attr != NULL && ippGetGroupTag (attr) != IPP_TAG_PRINTER) + attr = attr->next; + + if (attr == NULL) + break; + +- while (attr != NULL && attr->group_tag == IPP_TAG_PRINTER) ++ while (attr != NULL && ippGetGroupTag (attr) == IPP_TAG_PRINTER) + { +- if (strcmp (attr->name, "printer-name") == 0 && +- attr->value_tag == IPP_TAG_NAME) +- printer_name = attr->values[0].string.text; +- else if (strcmp (attr->name, "printer-uri-supported") == 0 && +- attr->value_tag == IPP_TAG_URI) +- printer_uri = attr->values[0].string.text; +- else if (strcmp (attr->name, "member-uris") == 0 && +- attr->value_tag == IPP_TAG_URI) +- member_uris = attr->values[0].string.text; +- else if (strcmp (attr->name, "printer-location") == 0) +- location = attr->values[0].string.text; +- else if (strcmp (attr->name, "printer-info") == 0) +- description = attr->values[0].string.text; +- else if (strcmp (attr->name, "printer-state-message") == 0) +- state_msg = attr->values[0].string.text; +- else if (strcmp (attr->name, "printer-state-reasons") == 0) ++ if (strcmp (ippGetName (attr), "printer-name") == 0 && ++ ippGetValueTag (attr) == IPP_TAG_NAME) ++ printer_name = ippGetString (attr, 0, NULL); ++ else if (strcmp (ippGetName (attr), "printer-uri-supported") == 0 && ++ ippGetValueTag (attr) == IPP_TAG_URI) ++ printer_uri = ippGetString (attr, 0, NULL); ++ else if (strcmp (ippGetName (attr), "member-uris") == 0 && ++ ippGetValueTag (attr) == IPP_TAG_URI) ++ member_uris = ippGetString (attr, 0, NULL); ++ else if (strcmp (ippGetName (attr), "printer-location") == 0) ++ location = ippGetString (attr, 0, NULL); ++ else if (strcmp (ippGetName (attr), "printer-info") == 0) ++ description = ippGetString (attr, 0, NULL); ++ else if (strcmp (ippGetName (attr), "printer-state-message") == 0) ++ state_msg = ippGetString (attr, 0, NULL); ++ else if (strcmp (ippGetName (attr), "printer-state-reasons") == 0) + /* Store most important reason to reason_msg and set + its importance at printer_state_reason_level */ + { +- for (i = 0; i < attr->num_values; i++) ++ for (i = 0; i < ippGetCount (attr); i++) + { +- if (strcmp (attr->values[i].string.text, "none") != 0) ++ if (strcmp (ippGetString (attr, i, NULL), "none") != 0) + { + /* Sets is_paused flag for paused printer. */ +- if (strcmp (attr->values[i].string.text, "paused") == 0) ++ if (strcmp (ippGetString (attr, i, NULL), "paused") == 0) + { + is_paused = TRUE; + } + + interested_in = FALSE; + for (j = 0; j < G_N_ELEMENTS (reasons); j++) +- if (strncmp (attr->values[i].string.text, reasons[j], strlen (reasons[j])) == 0) ++ if (strncmp (ippGetString (attr, i, NULL), reasons[j], strlen (reasons[j])) == 0) + { + interested_in = TRUE; + break; +@@ -1814,87 +1842,87 @@ cups_request_printer_list_cb (GtkPrintBackendCups *cups_backend, + + if (interested_in) + { +- if (g_str_has_suffix (attr->values[i].string.text, "-report")) ++ if (g_str_has_suffix (ippGetString (attr, i, NULL), "-report")) + { + if (printer_state_reason_level <= 1) + { +- reason_msg = attr->values[i].string.text; ++ reason_msg = ippGetString (attr, i, NULL); + printer_state_reason_level = 1; + } + } +- else if (g_str_has_suffix (attr->values[i].string.text, "-warning")) ++ else if (g_str_has_suffix (ippGetString (attr, i, NULL), "-warning")) + { + if (printer_state_reason_level <= 2) + { +- reason_msg = attr->values[i].string.text; ++ reason_msg = ippGetString (attr, i, NULL); + printer_state_reason_level = 2; +- } ++ } + } + else /* It is error in the case of no suffix. */ + { +- reason_msg = attr->values[i].string.text; ++ reason_msg = ippGetString (attr, i, NULL); + printer_state_reason_level = 3; + } + } + } + } + } +- else if (strcmp (attr->name, "printer-state") == 0) +- state = attr->values[0].integer; +- else if (strcmp (attr->name, "queued-job-count") == 0) +- job_count = attr->values[0].integer; +- else if (strcmp (attr->name, "printer-is-accepting-jobs") == 0) ++ else if (strcmp (ippGetName (attr), "printer-state") == 0) ++ state = ippGetInteger (attr, 0); ++ else if (strcmp (ippGetName (attr), "queued-job-count") == 0) ++ job_count = ippGetInteger (attr, 0); ++ else if (strcmp (ippGetName (attr), "printer-is-accepting-jobs") == 0) + { +- if (attr->values[0].boolean == 1) ++ if (ippGetBoolean (attr, 0) == 1) + is_accepting_jobs = TRUE; + else + is_accepting_jobs = FALSE; + } +- else if (strcmp (attr->name, "job-sheets-supported") == 0) ++ else if (strcmp (ippGetName (attr), "job-sheets-supported") == 0) + { + if (cups_backend->covers == NULL) + { +- cups_backend->number_of_covers = attr->num_values; ++ cups_backend->number_of_covers = ippGetCount (attr); + cups_backend->covers = g_new (char *, cups_backend->number_of_covers + 1); + for (i = 0; i < cups_backend->number_of_covers; i++) +- cups_backend->covers[i] = g_strdup (attr->values[i].string.text); ++ cups_backend->covers[i] = g_strdup (ippGetString (attr, i, NULL)); + cups_backend->covers[cups_backend->number_of_covers] = NULL; + } + } +- else if (strcmp (attr->name, "job-sheets-default") == 0) ++ else if (strcmp (ippGetName (attr), "job-sheets-default") == 0) + { +- if (attr->num_values == 2) ++ if (ippGetCount (attr) == 2) + { +- default_cover_before = attr->values[0].string.text; +- default_cover_after = attr->values[1].string.text; ++ default_cover_before = ippGetString (attr, 0, NULL); ++ default_cover_after = ippGetString (attr, 1, NULL); + } + } +- else if (strcmp (attr->name, "printer-type") == 0) ++ else if (strcmp (ippGetName (attr), "printer-type") == 0) + { + got_printer_type = TRUE; +- if (attr->values[0].integer & 0x00020000) ++ if (ippGetInteger (attr, 0) & 0x00020000) + default_printer = TRUE; + else + default_printer = FALSE; + +- if (attr->values[0].integer & 0x00000002) ++ if (ippGetInteger (attr, 0) & 0x00000002) + remote_printer = TRUE; + else + remote_printer = FALSE; + } +- else if (strcmp (attr->name, "auth-info-required") == 0) ++ else if (strcmp (ippGetName (attr), "auth-info-required") == 0) + { +- if (strcmp (attr->values[0].string.text, "none") != 0) ++ if (strcmp (ippGetString (attr, 0, NULL), "none") != 0) + { +- auth_info_required = g_new0 (gchar *, attr->num_values + 1); +- for (i = 0; i < attr->num_values; i++) +- auth_info_required[i] = g_strdup (attr->values[i].string.text); ++ auth_info_required = g_new0 (gchar *, ippGetCount (attr) + 1); ++ for (i = 0; i < ippGetCount (attr); i++) ++ auth_info_required[i] = g_strdup (ippGetString (attr, i, NULL)); + } + } + else + { + GTK_NOTE (PRINTING, +- g_print ("CUPS Backend: Attribute %s ignored", attr->name)); ++ g_print ("CUPS Backend: Attribute %s ignored", ippGetName (attr))); + } + + attr = attr->next; +@@ -2707,7 +2737,7 @@ cups_request_default_printer_cb (GtkPrintBackendCups *print_backend, + response = gtk_cups_result_get_response (result); + + if ((attr = ippFindAttribute (response, "printer-name", IPP_TAG_NAME)) != NULL) +- print_backend->default_printer = g_strdup (attr->values[0].string.text); ++ print_backend->default_printer = g_strdup (ippGetString (attr, 0, NULL)); + + print_backend->got_default_printer = TRUE; + +-- +1.7.7.5 (Apple Git-28) + Modified: patches/0001-Bug-702516-Make-Werror-format-nonliteral-happy.patch 253 lines changed, 253 insertions(+), 0 deletions(-) =================================================================== @@ -0,0 +1,253 @@ +From 96e40ec7321990fe63fb41b1be0ceead21b3ffc3 Mon Sep 17 00:00:00 2001 +From: John Ralls <jralls(a)ceridwen.us> +Date: Sun, 29 Sep 2013 11:40:25 -0700 +Subject: [PATCH] Bug 702516 - Make -Werror=format-nonliteral happy + +--- + gio/gcontenttype.c | 5 ++++- + gio/gthreadedresolver.c | 5 +++++ + glib/gfileutils.c | 50 +++++++++++++++++++++++++++++++++++-------------- + glib/gmarkup.c | 7 ++++++- + glib/gstrfuncs.c | 6 +++++- + glib/gutils.c | 5 +++++ + 6 files changed, 61 insertions(+), 17 deletions(-) + +diff --git a/gio/gcontenttype.c b/gio/gcontenttype.c +index 575d6fe..8dc5896 100644 +--- a/gio/gcontenttype.c ++++ b/gio/gcontenttype.c +@@ -393,6 +393,8 @@ g_content_type_get_mime_type (const char *type) + return g_strdup (type); + } + ++#pragma GCC diagnostic push ++#pragma GCC diagnostic ignored "-Wformat-nonliteral" + + static GIcon * + g_content_type_get_icon_internal (const gchar *type, +@@ -423,7 +425,7 @@ g_content_type_get_icon_internal (const gchar *type, + G_LOCK (gio_xdgmime); + xdg_icon = xdg_mime_get_icon (type); + G_UNLOCK (gio_xdgmime); +- if (xdg_icon != NULL) ++ if (xdg_icon != NULL) + xdg_mimetype_icon = g_strdup_printf (file_template, xdg_icon); + + if (xdg_mimetype_icon) +@@ -450,6 +452,7 @@ g_content_type_get_icon_internal (const gchar *type, + + return themed_icon; + } ++#pragma GCC diagnostic pop + + /** + * g_content_type_get_icon: +diff --git a/gio/gthreadedresolver.c b/gio/gthreadedresolver.c +index 37f930c..1ffaf15 100644 +--- a/gio/gthreadedresolver.c ++++ b/gio/gthreadedresolver.c +@@ -505,6 +505,9 @@ g_resolver_record_type_to_rrtype (GResolverRecordType type) + g_return_val_if_reached (-1); + } + ++#pragma GCC diagnostic push ++#pragma GCC diagnostic ignored "-Wformat-nonliteral" ++ + static GList * + g_resolver_records_from_res_query (const gchar *rrname, + gint rrtype, +@@ -619,6 +622,8 @@ g_resolver_records_from_res_query (const gchar *rrname, + return records; + } + ++#pragma GCC diagnostic pop ++ + #elif defined(G_OS_WIN32) + + static GVariant * +diff --git a/glib/gfileutils.c b/glib/gfileutils.c +index 7e5bedc..eb5baea 100644 +--- a/glib/gfileutils.c ++++ b/glib/gfileutils.c +@@ -1004,25 +1004,47 @@ rename_file (const char *old_name, + return TRUE; + } + +-/* format string must have two '%s': +- * +- * - the place for the filename +- * - the place for the strerror +- */ +-static void +-format_error_message (GError **error, +- const gchar *filename, ++static char * ++format_error_message (const gchar *filename, ++ const gchar *format_string) G_GNUC_FORMAT(2); ++ ++#pragma GCC diagnostic push ++#pragma GCC diagnostic ignored "-Wformat-nonliteral" ++ ++static char * ++format_error_message (const gchar *filename, + const gchar *format_string) + { + gint saved_errno = errno; + gchar *display_name; ++ gchar *msg; + + display_name = g_filename_display_name (filename); ++ msg = g_strdup_printf (format_string, display_name, g_strerror (saved_errno)); ++ g_free (display_name); ++ ++ return msg; ++} + +- g_set_error (error, G_FILE_ERROR, g_file_error_from_errno (saved_errno), +- format_string, display_name, g_strerror (saved_errno)); ++#pragma GCC diagnostic pop + +- g_free (display_name); ++/* format string must have two '%s': ++ * ++ * - the place for the filename ++ * - the place for the strerror ++ */ ++static void ++set_file_error (GError **error, ++ const gchar *filename, ++ const gchar *format_string) ++ ++{ ++ int saved_errno = errno; ++ char *msg = format_error_message (filename, format_string); ++ ++ g_set_error_literal (error, G_FILE_ERROR, g_file_error_from_errno (saved_errno), ++ msg); ++ g_free (msg); + } + + static gchar * +@@ -1044,7 +1066,7 @@ write_to_temp_file (const gchar *contents, + + if (fd == -1) + { +- format_error_message (err, tmp_name, _("Failed to create file '%s': %s")); ++ set_file_error (err, tmp_name, _("Failed to create file '%s': %s")); + goto out; + } + +@@ -1068,7 +1090,7 @@ write_to_temp_file (const gchar *contents, + if (errno == EINTR) + continue; + +- format_error_message (err, tmp_name, _("Failed to write file '%s': write() failed: %s")); ++ set_file_error (err, tmp_name, _("Failed to write file '%s': write() failed: %s")); + close (fd); + g_unlink (tmp_name); + +@@ -1108,7 +1130,7 @@ write_to_temp_file (const gchar *contents, + */ + if (g_lstat (dest_file, &statbuf) == 0 && statbuf.st_size > 0 && fsync (fd) != 0) + { +- format_error_message (err, tmp_name, _("Failed to write file '%s': fsync() failed: %s")); ++ set_file_error (err, tmp_name, _("Failed to write file '%s': fsync() failed: %s")); + close (fd); + g_unlink (tmp_name); + +diff --git a/glib/gmarkup.c b/glib/gmarkup.c +index 552773f..fb02a42 100644 +--- a/glib/gmarkup.c ++++ b/glib/gmarkup.c +@@ -2366,6 +2366,9 @@ find_conversion (const char *format, + * + * Since: 2.4 + */ ++#pragma GCC diagnostic push ++#pragma GCC diagnostic ignored "-Wformat-nonliteral" ++ + gchar * + g_markup_vprintf_escaped (const gchar *format, + va_list args) +@@ -2430,6 +2433,7 @@ g_markup_vprintf_escaped (const gchar *format, + G_VA_COPY (args2, args); + + output1 = g_strdup_vprintf (format1->str, args); ++ + if (!output1) + { + va_end (args2); +@@ -2440,7 +2444,6 @@ g_markup_vprintf_escaped (const gchar *format, + va_end (args2); + if (!output2) + goto cleanup; +- + result = g_string_new (NULL); + + /* Iterate through the original format string again, +@@ -2492,6 +2495,8 @@ g_markup_vprintf_escaped (const gchar *format, + return NULL; + } + ++#pragma GCC diagnostic pop ++ + /** + * g_markup_printf_escaped: + * @format: printf() style format string +diff --git a/glib/gstrfuncs.c b/glib/gstrfuncs.c +index 9509233..4fcd91c 100644 +--- a/glib/gstrfuncs.c ++++ b/glib/gstrfuncs.c +@@ -881,6 +881,9 @@ g_ascii_dtostr (gchar *buffer, + return g_ascii_formatd (buffer, buf_len, "%.17g", d); + } + ++#pragma GCC diagnostic push ++#pragma GCC diagnostic ignored "-Wformat-nonliteral" ++ + /** + * g_ascii_formatd: + * @buffer: A buffer to place the resulting string in +@@ -909,7 +912,7 @@ g_ascii_formatd (gchar *buffer, + locale_t old_locale; + + old_locale = uselocale (get_C_locale ()); +- _g_snprintf (buffer, buf_len, format, d); ++ _g_snprintf (buffer, buf_len, format, d); + uselocale (old_locale); + + return buffer; +@@ -988,6 +991,7 @@ g_ascii_formatd (gchar *buffer, + return buffer; + #endif + } ++#pragma GCC diagnostic pop + + #define ISSPACE(c) ((c) == ' ' || (c) == '\f' || (c) == '\n' || \ + (c) == '\r' || (c) == '\t' || (c) == '\v') +diff --git a/glib/gutils.c b/glib/gutils.c +index 0a9944f..2620cb6 100644 +--- a/glib/gutils.c ++++ b/glib/gutils.c +@@ -2148,6 +2148,9 @@ g_format_size (guint64 size) + * Flags to modify the format of the string returned by g_format_size_full(). + */ + ++#pragma GCC diagnostic push ++#pragma GCC diagnostic ignored "-Wformat-nonliteral" ++ + /** + * g_format_size_full: + * @size: a size in bytes +@@ -2281,6 +2284,8 @@ g_format_size_full (guint64 size, + return g_string_free (string, FALSE); + } + ++#pragma GCC diagnostic pop ++ + /** + * g_format_size_for_display: + * @size: a size in bytes +-- +1.8.3.rc0 + Modified: patches/0001-Bug-707945-GTK2-Quartz-typeahead-find-in-GtkTreeView.patch 69 lines changed, 69 insertions(+), 0 deletions(-) =================================================================== @@ -0,0 +1,69 @@ +From 8407a6268b69ebf127240f5ad4372cabedb6891a Mon Sep 17 00:00:00 2001 +From: John Ralls <jralls(a)ceridwen.us> +Date: Sun, 28 Dec 2014 14:54:14 -0800 +Subject: [PATCH] Bug 707945 - GTK2/Quartz: 'typeahead find' in GtkTreeView no + longer + +accepts text input + +Get win from the event rather than from the IMContextQuartz's client window, +because it's the event window that will eventually be called on to insert +the text. +--- + modules/input/imquartz.c | 26 +++++++++++++++++--------- + 1 file changed, 17 insertions(+), 9 deletions(-) + +diff --git a/modules/input/imquartz.c b/modules/input/imquartz.c +index 67c7d6c..b72d05f 100644 +--- a/modules/input/imquartz.c ++++ b/modules/input/imquartz.c +@@ -194,15 +194,6 @@ quartz_filter_keypress (GtkIMContext *context, + if (!qc->client_window) + return FALSE; + +- nsview = gdk_quartz_window_get_nsview (qc->client_window); +- if (GDK_IS_WINDOW (nsview)) +- /* it gets GDK_WINDOW in some cases */ +- return gtk_im_context_filter_keypress (qc->slave, event); +- else +- win = (GdkWindow *)[ (GdkQuartzView *)nsview gdkWindow]; +- GTK_NOTE (MISC, g_print ("client_window: %p, win: %p, nsview: %p\n", +- qc->client_window, win, nsview)); +- + NSEvent *nsevent = gdk_quartz_event_get_nsevent ((GdkEvent *)event); + + if (!nsevent) +@@ -214,6 +205,22 @@ quartz_filter_keypress (GtkIMContext *context, + return gtk_im_context_filter_keypress (qc->slave, event); + } + ++ nsview = gdk_quartz_window_get_nsview (qc->client_window); ++ if (GDK_IS_WINDOW (nsview)) ++ /* it gets GDK_WINDOW in some cases */ ++ return gtk_im_context_filter_keypress (qc->slave, event); ++ else ++ /* It's the window in the event, not the window that Gtk thinks ++ * has focus, that NSTextInputClient calls to insert the text, so ++ * we need to pass the right window to output_result in order to ++ * get it back. ++ */ ++ win = (GdkWindow *)[(GdkQuartzView *)[[nsevent window] contentView] gdkWindow]; ++ ++ GTK_NOTE (MISC, g_print ("client_window: %p, win: %p, nsview: %p\n", ++ qc->client_window, win, nsview)); ++ ++ + if (event->type == GDK_KEY_RELEASE) + return FALSE; + +@@ -226,6 +233,7 @@ quartz_filter_keypress (GtkIMContext *context, + g_object_set_data (G_OBJECT (win), TIC_IN_KEY_DOWN, + GUINT_TO_POINTER (TRUE)); + [nsview keyDown: nsevent]; ++ + } + /* JIS_Eisu || JIS_Kana */ + if (event->hardware_keycode == 102 || event->hardware_keycode == 104) +-- +1.8.3.rc0 + Modified: patches/0001-Bug-708998-Avoid-infinite-loop.patch 42 lines changed, 42 insertions(+), 0 deletions(-) =================================================================== @@ -0,0 +1,42 @@ +From e1dcd5c77d52db0033cafd23d84f392c4d9f457e Mon Sep 17 00:00:00 2001 +From: Hamish Mackenzie <Hamish.K.Mackenzie(a)googlemail.com> +Date: Sun, 29 Sep 2013 05:06:53 +1300 +Subject: [PATCH] Fix infinite loop in gdkevents.c _gdk_event_queue_find_first + +--- + gdk/gdkevents.c | 18 +++++++++--------- + 1 file changed, 9 insertions(+), 9 deletions(-) + +diff --git a/gdk/gdkevents.c b/gdk/gdkevents.c +index 327b543..e770f47 100644 +--- a/gdk/gdkevents.c ++++ b/gdk/gdkevents.c +@@ -96,16 +96,16 @@ _gdk_event_queue_find_first (GdkDisplay *display) + { + GdkEventPrivate *event = tmp_list->data; + +- if (event->flags & GDK_EVENT_PENDING) +- continue; +- +- if (pending_motion) +- return pending_motion; ++ if (!(event->flags & GDK_EVENT_PENDING)) ++ { ++ if (pending_motion) ++ return pending_motion; + +- if (event->event.type == GDK_MOTION_NOTIFY && !display->flushing_events) +- pending_motion = tmp_list; +- else +- return tmp_list; ++ if (event->event.type == GDK_MOTION_NOTIFY && !display->flushing_events) ++ pending_motion = tmp_list; ++ else ++ return tmp_list; ++ } + + tmp_list = g_list_next (tmp_list); + } +-- +1.7.12.4 (Apple Git-37) + Modified: patches/0001-Bug-709939-quartz-window-pos.patch 17 lines changed, 17 insertions(+), 0 deletions(-) =================================================================== @@ -0,0 +1,17 @@ +diff --git a/gdk/quartz/gdkscreen-quartz.c b/gdk/quartz/gdkscreen-quartz.c +index e83c87b..e28f3b2 100644 +--- a/gdk/quartz/gdkscreen-quartz.c ++++ b/gdk/quartz/gdkscreen-quartz.c +@@ -208,7 +208,11 @@ _gdk_quartz_screen_update_window_sizes (GdkScreen *screen) + windows = gdk_screen_get_toplevel_windows (screen); + + for (list = windows; list; list = list->next) +- _gdk_quartz_window_update_position (list->data); ++ { ++ if (GDK_WINDOW_TYPE(list->data) == GDK_WINDOW_OFFSCREEN) ++ continue; ++ _gdk_quartz_window_update_position (list->data); ++ } + + g_list_free (windows); + } Modified: patches/0001-Enable-use-of-XDG_DATA_DIRS-for-locating-iso-code-fi.patch 29 lines changed, 29 insertions(+), 0 deletions(-) =================================================================== @@ -0,0 +1,29 @@ +From afc08dfa25dc5a26d3f0ffae8bf31d3be0e89b57 Mon Sep 17 00:00:00 2001 +From: John Ralls <jralls(a)ceridwen.us> +Date: Fri, 9 Sep 2016 15:46:34 -0700 +Subject: [PATCH] Enable use of XDG_DATA_DIRS for locating iso-code files. + +Permits using them in a relocatable package like a Mac application bundle. +--- + gtkspell/gtkspell-codetable.c | 5 ++++- + 1 file changed, 4 insertions(+), 1 deletion(-) + +diff --git a/gtkspell/gtkspell-codetable.c b/gtkspell/gtkspell-codetable.c +index b53951f..dcb5f1e 100644 +--- a/gtkspell/gtkspell-codetable.c ++++ b/gtkspell/gtkspell-codetable.c +@@ -103,7 +103,10 @@ iso_codes_parse (const GMarkupParser *parser, + gchar *filename; + GError *error = NULL; + +- filename = g_build_filename (ISO_CODES_PREFIX, "share", "xml", "iso-codes", ++ const gchar *dirname = g_getenv("XDG_DATA_DIRS"); ++ if (dirname == NULL) ++ dirname = g_build_filename (ISO_CODES_PREFIX, "share", NULL); ++ filename = g_build_filename (dirname, "xml", "iso-codes", + basename, NULL); + mapped_file = g_mapped_file_new (filename, FALSE, &error); + g_free (filename); +-- +2.2.2 + Modified: patches/0001-Fix-DnD-Introspection-on-Quartz-Backend.patch 26 lines changed, 26 insertions(+), 0 deletions(-) =================================================================== @@ -0,0 +1,26 @@ +From 673013ac67e322ff86193001131255fc24a68d5e Mon Sep 17 00:00:00 2001 +From: John Ralls <jralls(a)ceridwen.us> +Date: Fri, 29 May 2015 13:04:07 -0700 +Subject: [PATCH] Fix DnD Introspection on Quartz Backend. + +Don't exclude the -quartz.c files from introspection_files. +--- + gtk/Makefile.am | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +diff --git a/gtk/Makefile.am b/gtk/Makefile.am +index 51153e6..ae4ae62 100644 +--- a/gtk/Makefile.am ++++ b/gtk/Makefile.am +@@ -1331,7 +1331,7 @@ distclean-local: + if HAVE_INTROSPECTION + introspection_files = \ + $(filter-out %private.h gtktextdisplay.h gtktextlayout.h gtkx.h, $(gtkinclude_HEADERS) $(a11yinclude_HEADERS) $(deprecatedinclude_HEADERS)) \ +- $(filter-out %win32.c %quartz.c, $(gtk_base_c_sources)) \ ++ $(filter-out %win32.c, $(gtk_base_c_sources)) \ + gtkprintoperation-unix.c \ + gtktypebuiltins.h \ + gtktypebuiltins.c +-- +2.2.2 + Modified: patches/0001-Fix-relative-module-paths.patch 42 lines changed, 42 insertions(+), 0 deletions(-) =================================================================== @@ -0,0 +1,42 @@ +From 2332e82a1415696a36f138768b8330c1e97d3a89 Mon Sep 17 00:00:00 2001 +From: John Ralls <jralls(a)ceridwen.us> +Date: Sat, 3 Nov 2012 11:46:59 -0700 +Subject: [PATCH] Fix relative module paths + +So that the created absolute path is where the modules are installed +instead of where the modules file is installed (i.e., +lib/pango/1.8.0/modules instead of etc/pango). +--- + pango/modules.c | 16 +++++++++++----- + 1 file changed, 11 insertions(+), 5 deletions(-) + +diff --git a/pango/modules.c b/pango/modules.c +index 644cc9c..c5a19f2 100644 +--- a/pango/modules.c ++++ b/pango/modules.c +@@ -450,11 +450,17 @@ process_module_file (FILE *module_file, const gchar *module_file_dir) + switch (i) + { + case 0: +- if (!g_path_is_absolute (tmp_buf->str)) { +- const gchar *abs_file_name = g_build_filename (module_file_dir, tmp_buf->str, NULL); +- g_string_assign (tmp_buf, abs_file_name); +- g_free ((gpointer) abs_file_name); +- } ++ if (!g_path_is_absolute (tmp_buf->str)) ++ { ++ const gchar *lib_dir = pango_get_lib_subdirectory (); ++ const gchar *abs_file_name = g_build_filename (lib_dir, ++ MODULE_VERSION, ++ "modules", ++ tmp_buf->str, ++ NULL); ++ g_string_assign (tmp_buf, abs_file_name); ++ g_free ((gpointer) abs_file_name); ++ } + pair->module = find_or_create_module (tmp_buf->str); + break; + case 1: +-- +1.7.9.6 (Apple Git-31.1) + Modified: patches/0001-Make-ATSUI-backend-compile-again.patch 74 lines changed, 74 insertions(+), 0 deletions(-) =================================================================== @@ -0,0 +1,74 @@ +From 18dc8d4059c6c21f62caa75d0e0ff7d3d14d8649 Mon Sep 17 00:00:00 2001 +From: Kristian Rietveld <kris(a)gtk.org> +Date: Fri, 1 Jul 2011 21:08:39 +0200 +Subject: [PATCH] Make ATSUI backend compile again + +Commit 02f80c9acdec53f58fef0e12f41363c3c4ea1efe broke the build and was +likely committed untested. + +pango-1-29-4 was branched from tag 1.29.3, before this fix was applied +to master. + +Note that the problem affects only OS X 10.4 (Tiger); pango builds on +later OS X versions without this change. +--- + pango/pangoatsui-fontmap.c | 8 ++++++-- + pango/pangoatsui-private.h | 2 ++ + 2 files changed, 8 insertions(+), 2 deletions(-) + +diff --git a/pango/pangoatsui-fontmap.c b/pango/pangoatsui-fontmap.c +index 8eb123a..c169f0d 100644 +--- a/pango/pangoatsui-fontmap.c ++++ b/pango/pangoatsui-fontmap.c +@@ -70,6 +70,8 @@ struct _PangoATSUIFace + static GType pango_atsui_family_get_type (void); + static GType pango_atsui_face_get_type (void); + ++static gpointer pango_atsui_face_parent_class; ++ + static const char * + get_real_family (const char *family_name) + { +@@ -200,6 +202,8 @@ pango_atsui_family_is_monospace (PangoFontFamily *family) + return atsuifamily->is_monospace; + } + ++G_DEFINE_TYPE (PangoATSUIFamily, pango_atsui_family, PANGO_TYPE_FONT_FAMILY); ++ + static void + pango_atsui_family_finalize (GObject *object) + { +@@ -219,8 +223,6 @@ pango_atsui_family_finalize (GObject *object) + G_OBJECT_CLASS (pango_atsui_family_parent_class)->finalize (object); + } + +-G_DEFINE_TYPE (PangoATSUIFamilyClass, pango_atsui_family, PANGO_TYPE_FONT_FAMILY); +- + static void + pango_atsui_family_class_init (PangoATSUIFamilyClass *class) + { +@@ -337,6 +339,8 @@ pango_atsui_face_class_init (PangoFontFaceClass *class) + { + GObjectClass *object_class = (GObjectClass *)class; + ++ pango_atsui_face_parent_class = g_type_class_peek_parent (class); ++ + object_class->finalize = pango_atsui_face_finalize; + + class->describe = pango_atsui_face_describe; +diff --git a/pango/pangoatsui-private.h b/pango/pangoatsui-private.h +index a5ab0cb..81bcf60 100644 +--- a/pango/pangoatsui-private.h ++++ b/pango/pangoatsui-private.h +@@ -38,6 +38,8 @@ G_BEGIN_DECLS + + + typedef struct _PangoATSUIFamily PangoATSUIFamily; ++typedef struct _PangoFontFamilyClass PangoATSUIFamilyClass; ++ + typedef struct _PangoATSUIFace PangoATSUIFace; + + typedef struct _PangoATSUIFontMap PangoATSUIFontMap; +-- +1.7.6.3.dirty + Modified: patches/0001-Patch-Orbit-2.14.19-to-master-for-current-GLib.patch 1963 lines changed, 1963 insertions(+), 0 deletions(-) =================================================================== @@ -0,0 +1,1963 @@ +From 8b6f17f1bf1a253b5d39bfd30c764c63b65001ef Mon Sep 17 00:00:00 2001 +From: John Ralls <jralls(a)ceridwen.us> +Date: Tue, 1 Oct 2013 16:37:01 -0700 +Subject: [PATCH] Patch Orbit-2.14.19 to master for current GLib + +--- + NEWS | 7 + + configure.ac | 424 ++++++++++++++++++++++++++++++++ + configure.in | 413 ------------------------------- + include/orbit/GIOP/giop-types.h | 5 + + include/orbit/GIOP/giop.h | 1 + + include/orbit/orb-core/corba-orb-type.h | 3 + + include/orbit/orb-core/corba-orb.h | 2 + + include/orbit/poa/orbit-adaptor.h | 3 + + include/orbit/util/basic_types.h | 8 - + linc2/src/Makefile.am | 6 +- + linc2/src/linc-connection.c | 17 +- + linc2/src/linc-private.h | 3 + + linc2/src/linc-protocols.c | 1 + + linc2/src/linc.c | 40 ++- + linc2/test/Makefile.am | 2 +- + src/idl-compiler/Makefile.am | 2 +- + src/orb/GIOP/Makefile.am | 2 +- + src/orb/GIOP/giop-recv-buffer.c | 14 +- + src/orb/GIOP/giop-send-buffer.c | 9 +- + src/orb/GIOP/giop.c | 38 ++- + src/orb/Makefile.am | 2 +- + src/orb/dynamic/Makefile.am | 2 +- + src/orb/orb-core/Makefile.am | 2 +- + src/orb/orb-core/corba-object.c | 8 + + src/orb/orb-core/corba-orb.c | 24 +- + src/orb/poa/Makefile.am | 2 +- + src/orb/poa/poa.c | 25 +- + src/orb/util/Makefile.am | 2 +- + src/orb/util/genrand.c | 13 +- + src/services/imodule/Makefile.am | 2 +- + src/services/name/Makefile.am | 2 +- + test/Makefile.am | 2 +- + test/everything/Makefile.am | 4 +- + test/everything/client.c | 14 +- + test/everything/server.c | 3 +- + test/inhibit/Makefile.am | 2 +- + test/poa/Makefile.am | 2 +- + test/poa/poatest-basic-shell.c | 3 +- + test/test-corbaloc.c | 4 +- + test/test-dynany.c | 5 +- + test/test-giop.c | 4 +- + test/test-mem.c | 8 +- + test/test-performance.c | 2 + + test/timeout-client.c | 2 + + test/timeout-server.c | 3 +- + 45 files changed, 662 insertions(+), 480 deletions(-) + create mode 100644 configure.ac + delete mode 100644 configure.in + +diff --git a/NEWS b/NEWS +index bddfdff..7734385 100644 +--- a/NEWS ++++ b/NEWS +@@ -1,3 +1,10 @@ ++ORBit2-2.14.20 ++ ++ - build fixes ++ + Stop using -DG_DISABLE_DEPRECATED since it doesn't build ++ + Use AM_CPPFLAGS instead of I@@ Diff output truncated at 100000 characters. @@ -------------- This E-Mail was brought to you by github_commit_mail.py (Source: https://github.com/geany/infrastructure).

1 0

[geany/geany-osx] 849c59: Rename the "patches" directory to "geany_patches"
by Jiří Techet 30 Oct '21

30 Oct '21

Branch: refs/heads/master Author: Jiří Techet <techet(a)gmail.com> Committer: Jiří Techet <techet(a)gmail.com> Date: Fri, 29 Oct 2021 20:10:08 UTC Commit: 849c5981eaa393720b14268628c36be02803b39f https://github.com/geany/geany-osx/commit/849c5981eaa393720b14268628c36be02… Log Message: ----------- Rename the "patches" directory to "geany_patches" Modified Paths: -------------- README.md geany.modules geany_patches/01-geany_config_shell.patch geany_patches/01-gtk_mac_integration_radio_fix.patch geany_patches/03-geany_vte_login_shell.patch geany_patches/03-vte_2.91_relpath.patch Modified: README.md 2 lines changed, 1 insertions(+), 1 deletions(-) =================================================================== @@ -34,7 +34,7 @@ A brief description of the contents of the project directory: dependency specifications. Since the upstram project is in a constant state of flux and fails to build frequently, this allows us to make a snapshot of a working configuration for our build. -* *patches*: various patches fixing dependencies to enable bundling. +* *geany_patches*: various patches fixing dependencies to enable bundling. * *utils*: various utility scripts. ### Configuration files Modified: geany.modules 12 lines changed, 6 insertions(+), 6 deletions(-) =================================================================== @@ -43,7 +43,7 @@ <branch module="vte/0.64/vte-${version}.tar.xz" version="0.64.2">  - <patch file="https://github.com/geany/geany-osx/raw/master/patches/03-vte_2.91_relpath.p…" strip="1" /> + <patch file="https://github.com/geany/geany-osx/raw/master/geany_patches/03-vte_2.91_rel…" strip="1" /> </branch> <dependencies> <dep package="pcre2" /> @@ -66,7 +66,7 @@ <branch module="gtk-mac-integration/3.0/gtk-mac-integration-${version}.tar.xz" checkoutdir="gtk-mac-integration-fixed" version="3.0.1"> - <patch file="https://github.com/geany/geany-osx/raw/master/patches/01-gtk_mac_integratio…" strip="1" /> + <patch file="https://github.com/geany/geany-osx/raw/master/geany_patches/01-gtk_mac_inte…" strip="1" /> </branch> </autotools> @@ -101,8 +101,8 @@ checkoutdir="geany-git" revision="master" >  - <patch file="https://github.com/geany/geany-osx/raw/master/patches/01-geany_config_shell…" strip="1" /> - <patch file="https://github.com/geany/geany-osx/raw/master/patches/03-geany_vte_login_sh…" strip="1" /> + <patch file="https://github.com/geany/geany-osx/raw/master/geany_patches/01-geany_config…" strip="1" /> + <patch file="https://github.com/geany/geany-osx/raw/master/geany_patches/03-geany_vte_lo…" strip="1" /> </branch> <dependencies> <dep package="geany-deps" /> @@ -118,8 +118,8 @@ checkoutdir="geany-${version}" version="1.38">  - <patch file="https://github.com/geany/geany-osx/raw/master/patches/01-geany_config_shell…" strip="1" /> - <patch file="https://github.com/geany/geany-osx/raw/master/patches/03-geany_vte_login_sh…" strip="1" /> + <patch file="https://github.com/geany/geany-osx/raw/master/geany_patches/01-geany_config…" strip="1" /> + <patch file="https://github.com/geany/geany-osx/raw/master/geany_patches/03-geany_vte_lo…" strip="1" /> </branch> <dependencies> <dep package="geany-deps" /> Modified: geany_patches/01-geany_config_shell.patch 0 lines changed, 0 insertions(+), 0 deletions(-) =================================================================== No diff available, check online Modified: geany_patches/01-gtk_mac_integration_radio_fix.patch 0 lines changed, 0 insertions(+), 0 deletions(-) =================================================================== No diff available, check online Modified: geany_patches/03-geany_vte_login_shell.patch 0 lines changed, 0 insertions(+), 0 deletions(-) =================================================================== No diff available, check online Modified: geany_patches/03-vte_2.91_relpath.patch 0 lines changed, 0 insertions(+), 0 deletions(-) =================================================================== No diff available, check online -------------- This E-Mail was brought to you by github_commit_mail.py (Source: https://github.com/geany/infrastructure).

1 0

[geany/geany-osx] d19c14: Remove non-existent x11 option from gtk-pixbuf build
by Jiří Techet 30 Oct '21

30 Oct '21

Branch: refs/heads/master Author: Jiří Techet <techet(a)gmail.com> Committer: Jiří Techet <techet(a)gmail.com> Date: Fri, 29 Oct 2021 19:56:50 UTC Commit: d19c1470ca65917555066ecf51cfec8b2e4973e9 https://github.com/geany/geany-osx/commit/d19c1470ca65917555066ecf51cfec8b2… Log Message: ----------- Remove non-existent x11 option from gtk-pixbuf build Modified Paths: -------------- modulesets-stable/gtk-osx.modules Modified: modulesets-stable/gtk-osx.modules 2 lines changed, 1 insertions(+), 1 deletions(-) =================================================================== @@ -233,7 +233,7 @@ </after> </meson> - <meson id="gdk-pixbuf" mesonargs="-Dx11=false -Dman=false"> + <meson id="gdk-pixbuf" mesonargs="-Dman=false"> <branch module="gdk-pixbuf/2.42/gdk-pixbuf-2.42.4.tar.xz" version="2.42.4" hash="sha256:fe9c5dd88f486194ea2bc09b8814c1ed895bb6c530f37cbbf259757c4e482e4d"> <patch file="gdk-pixbuf-loader-name.patch" strip="1"/> -------------- This E-Mail was brought to you by github_commit_mail.py (Source: https://github.com/geany/infrastructure).

1 0

[geany/geany-osx] 07ea0f: Update modulesets
by Jiří Techet 30 Oct '21

30 Oct '21

Branch: refs/heads/master Author: Jiří Techet <techet(a)gmail.com> Committer: Jiří Techet <techet(a)gmail.com> Date: Fri, 29 Oct 2021 19:52:59 UTC Commit: 07ea0fb1c9271839eb7c00fd448e78b54556c426 https://github.com/geany/geany-osx/commit/07ea0fb1c9271839eb7c00fd448e78b54… Log Message: ----------- Update modulesets Modified Paths: -------------- modulesets-stable/gtk-osx.modules Modified: modulesets-stable/gtk-osx.modules 1 lines changed, 1 insertions(+), 0 deletions(-) =================================================================== @@ -299,6 +299,7 @@ <branch module="gtk+/3.24/gtk+-3.24.30.tar.xz" version="3.24.30" hash="sha256:ba75bfff320ad1f4cfbee92ba813ec336322cc3c660d406aad014b07087a3ba9"> <patch file="Quartz-version-detection-for-macOS-12.patch" strip="1"/> + <patch file="gtk+-scale-absolute-value.patch" strip="1"/> </branch> <dependencies> <dep package="glib"/> -------------- This E-Mail was brought to you by github_commit_mail.py (Source: https://github.com/geany/infrastructure).

1 0

[geany/geany] 045662: Free `accel_string` only after its last use (#2961)
by Avinash Sonawane 28 Oct '21

28 Oct '21

Branch: refs/heads/master Author: Avinash Sonawane <rootkea(a)gmail.com> Committer: GitHub <noreply(a)github.com> Date: Wed, 27 Oct 2021 23:46:52 UTC Commit: 04566236d3f9811d55d6c7bcc492b3a60369fd20 https://github.com/geany/geany/commit/04566236d3f9811d55d6c7bcc492b3a60369f… Log Message: ----------- Free `accel_string` only after its last use (#2961) Found by: scan-build Modified Paths: -------------- src/editor.c Modified: src/editor.c 4 lines changed, 3 insertions(+), 1 deletions(-) =================================================================== @@ -222,13 +222,15 @@ static void add_kb(GKeyFile *keyfile, const gchar *group, gchar **keys) gchar *accel_string = g_key_file_get_value(keyfile, group, keys[i], NULL); gtk_accelerator_parse(accel_string, &key, &mods); - g_free(accel_string); if (key == 0 && mods == 0) { g_warning("Can not parse accelerator \"%s\" from user snippets.conf", accel_string); + g_free(accel_string); continue; } + g_free(accel_string); + gtk_accel_group_connect(snippet_accel_group, key, mods, 0, g_cclosure_new_swap((GCallback)on_snippet_keybinding_activate, g_strdup(keys[i]), (GClosureNotify)g_free)); -------------- This E-Mail was brought to you by github_commit_mail.py (Source: https://github.com/geany/infrastructure).

1 0

[geany/www.geany.org] 5a0681: Mention GTK3 libraries instead of GTK2
by Arrigo Marchiori 19 Oct '21

19 Oct '21

Branch: refs/heads/master Author: Arrigo Marchiori <ardovm(a)yahoo.it> Committer: Enrico Tröger <enrico.troeger(a)uvena.de> Date: Mon, 18 Oct 2021 22:04:39 UTC Commit: 5a0681fd0367a7e83ccc8bee9a813abd1d7e9f88 https://github.com/geany/www.geany.org/commit/5a0681fd0367a7e83ccc8bee9a813… Log Message: ----------- Mention GTK3 libraries instead of GTK2 Source for the change: FreeBSD ports UPDATING notice 20211010 by @madpilot78 Modified Paths: -------------- page_content/about/geany.md Modified: page_content/about/geany.md 2 lines changed, 1 insertions(+), 1 deletions(-) =================================================================== @@ -1,7 +1,7 @@ About Geany ========== -Geany is a small and lightweight Integrated Development Environment. It was developed to provide a small and fast IDE, which has only a few dependencies from other packages. Another goal was to be as independent as possible from a special Desktop Environment like KDE or GNOME - Geany only requires the GTK2 runtime libraries. +Geany is a small and lightweight Integrated Development Environment. It was developed to provide a small and fast IDE, which has only a few dependencies from other packages. Another goal was to be as independent as possible from a special Desktop Environment like KDE or GNOME - Geany only requires the GTK3 runtime libraries. ## Features -------------- This E-Mail was brought to you by github_commit_mail.py (Source: https://github.com/geany/infrastructure).

1 0

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

Commits October 2021