Branch: refs/heads/master Author: Thomas Martitz thomas.martitz@mailbox.org Committer: GitHub noreply@github.com Date: Sat, 25 Dec 2021 19:55:05 UTC Commit: 32977676a90244e0410524614757d2cf214bae43 https://github.com/geany/geany/commit/32977676a90244e0410524614757d2cf214bae...
Log Message: ----------- autotools: use autoreconf and gettext (#2938)
autoreconf is much more convenient over calling the autotools programs individually.
Standard gettext should be used over glib's glue these days. AM_GLIB_GNU_GETTEXT and glib-gettextize are deprecated. This helps the meson build (#2761) as well as working with intltool is harder over there. gettext, on the other hand, is supported out of the box in meson.
Beware, autopoint is a new dependency when building from git,should not affect tarballs.
Inspired by: https://wiki.gnome.org/Initiatives/GnomeGoals/GettextMigration https://gitlab.gnome.org/GNOME/gedit/-/commit/0b4d03017fe7ba2e5c7d33d364de49...
Modified Paths: -------------- .github/workflows/build.yml .gitignore INSTALL Makefile.am README autogen.sh configure.ac doc/plugins.dox geany.desktop.in m4/geany-i18n.m4 po/LINGUAS po/Makevars
Modified: .github/workflows/build.yml 4 lines changed, 2 insertions(+), 2 deletions(-) =================================================================== @@ -69,7 +69,7 @@ jobs: sudo apt-get update -qq sudo apt-get install --assume-yes --no-install-recommends \ ccache \ - intltool \ + gettext autopoint \ libtool \ libgtk-3-dev \ doxygen \ @@ -139,7 +139,7 @@ jobs: sudo apt-get update -qq sudo apt-get install --assume-yes --no-install-recommends \ ccache \ - intltool \ + gettext autopoint \ libtool \ mingw-w64-tools \ g++-mingw-w64-i686 \
Modified: .gitignore 41 lines changed, 34 insertions(+), 7 deletions(-) =================================================================== @@ -17,6 +17,7 @@ Makefile.in #----------------------------------------------------------------------- # / (root) #----------------------------------------------------------------------- +/ABOUT-NLS /aclocal.m4 /autom4te.cache /build-aux/ @@ -41,14 +42,43 @@ Makefile.in /geany.nsi /global.tags.old /install-sh -/intltool -/intltool-* /libtool /localwin32.mk /ltmain.sh /m4/lt*.m4 -/m4/intltool.m4 /m4/libtool.m4 +/m4/codeset.m4 +/m4/extern-inline.m4 +/m4/fcntl-o.m4 +/m4/gettext.m4 +/m4/glibc2.m4 +/m4/glibc21.m4 +/m4/iconv.m4 +/m4/intdiv0.m4 +/m4/intl.m4 +/m4/intldir.m4 +/m4/intlmacosx.m4 +/m4/intmax.m4 +/m4/inttypes-pri.m4 +/m4/inttypes_h.m4 +/m4/lcmessage.m4 +/m4/lib-ld.m4 +/m4/lib-link.m4 +/m4/lib-prefix.m4 +/m4/lock.m4 +/m4/longlong.m4 +/m4/nls.m4 +/m4/po.m4 +/m4/printf-posix.m4 +/m4/progtest.m4 +/m4/size_max.m4 +/m4/stdint_h.m4 +/m4/threadlib.m4 +/m4/uintmax_t.m4 +/m4/visibility.m4 +/m4/wchar_t.m4 +/m4/wint_t.m4 +/m4/xsize.m4 /make_deb.sh /missing /mkinstalldirs @@ -65,10 +95,8 @@ Makefile.in /po/ChangeLog.save /po/*.gmo /po/*.header -/po/.intltool-merge-cache -/po/LINGUAS /po/Makefile.in.in -/po/Makevars +/po/Makevars.template /po/*.mo /po/*.pot /po/POTFILES @@ -79,7 +107,6 @@ Makefile.in /po/*.sed /po/*.sin /po/stamp-it -/po/.intlcache
#----------------------------------------------------------------------- # /src/
Modified: INSTALL 422 lines changed, 304 insertions(+), 118 deletions(-) =================================================================== @@ -1,182 +1,368 @@ +Installation Instructions +************************* + + Copyright (C) 1994-1996, 1999-2002, 2004-2017, 2020-2021 Free +Software Foundation, Inc. + + Copying and distribution of this file, with or without modification, +are permitted in any medium without royalty provided the copyright +notice and this notice are preserved. This file is offered as-is, +without warranty of any kind. + Basic Installation ==================
- These are generic installation instructions. + Briefly, the shell command './configure && make && make install' +should configure, build, and install this package. The following +more-detailed instructions are generic; see the 'README' file for +instructions specific to this package. Some packages provide this +'INSTALL' file but do not implement all of the features documented +below. The lack of an optional feature in a given package is not +necessarily a bug. More recommendations for GNU packages can be found +in *note Makefile Conventions: (standards)Makefile Conventions.
- The `configure' shell script attempts to guess correct values for + The 'configure' shell script attempts to guess correct values for various system-dependent variables used during compilation. It uses -those values to create a `Makefile' in each directory of the package. -It may also create one or more `.h' files containing system-dependent -definitions. Finally, it creates a shell script `config.status' that -you can run in the future to recreate the current configuration, a file -`config.cache' that saves the results of its tests to speed up -reconfiguring, and a file `config.log' containing compiler output -(useful mainly for debugging `configure'). +those values to create a 'Makefile' in each directory of the package. +It may also create one or more '.h' files containing system-dependent +definitions. Finally, it creates a shell script 'config.status' that +you can run in the future to recreate the current configuration, and a +file 'config.log' containing compiler output (useful mainly for +debugging 'configure'). + + It can also use an optional file (typically called 'config.cache' and +enabled with '--cache-file=config.cache' or simply '-C') that saves the +results of its tests to speed up reconfiguring. Caching is disabled by +default to prevent problems with accidental use of stale cache files.
If you need to do unusual things to compile the package, please try -to figure out how `configure' could check whether to do them, and mail -diffs or instructions to the address given in the `README' so they can -be considered for the next release. If at some point `config.cache' -contains results you don't want to keep, you may remove or edit it. - - The file `configure.in' is used to create `configure' by a program -called `autoconf'. You only need `configure.in' if you want to change -it or regenerate `configure' using a newer version of `autoconf'. - -The simplest way to compile this package is: - - 1. `cd' to the directory containing the package's source code and type - `./configure' to configure the package for your system. If you're - using `csh' on an old version of System V, you might need to type - `sh ./configure' instead to prevent `csh' from trying to execute - `configure' itself. - - Running `configure' takes awhile. While running, it prints some - messages telling which features it is checking for. - - 2. Type `make' to compile the package. - - 3. Optionally, type `make check' to run any self-tests that come with - the package. - - 4. Type `make install' to install the programs and any data files and - documentation. - - 5. You can remove the program binaries and object files from the - source code directory by typing `make clean'. To also remove the - files that `configure' created (so you can compile the package for - a different kind of computer), type `make distclean'. There is - also a `make maintainer-clean' target, but that is intended mainly +to figure out how 'configure' could check whether to do them, and mail +diffs or instructions to the address given in the 'README' so they can +be considered for the next release. If you are using the cache, and at +some point 'config.cache' contains results you don't want to keep, you +may remove or edit it. + + The file 'configure.ac' (or 'configure.in') is used to create +'configure' by a program called 'autoconf'. You need 'configure.ac' if +you want to change it or regenerate 'configure' using a newer version of +'autoconf'. + + The simplest way to compile this package is: + + 1. 'cd' to the directory containing the package's source code and type + './configure' to configure the package for your system. + + Running 'configure' might take a while. While running, it prints + some messages telling which features it is checking for. + + 2. Type 'make' to compile the package. + + 3. Optionally, type 'make check' to run any self-tests that come with + the package, generally using the just-built uninstalled binaries. + + 4. Type 'make install' to install the programs and any data files and + documentation. When installing into a prefix owned by root, it is + recommended that the package be configured and built as a regular + user, and only the 'make install' phase executed with root + privileges. + + 5. Optionally, type 'make installcheck' to repeat any self-tests, but + this time using the binaries in their final installed location. + This target does not install anything. Running this target as a + regular user, particularly if the prior 'make install' required + root privileges, verifies that the installation completed + correctly. + + 6. You can remove the program binaries and object files from the + source code directory by typing 'make clean'. To also remove the + files that 'configure' created (so you can compile the package for + a different kind of computer), type 'make distclean'. There is + also a 'make maintainer-clean' target, but that is intended mainly for the package's developers. If you use it, you may have to get all sorts of other programs in order to regenerate files that came with the distribution.
+ 7. Often, you can also type 'make uninstall' to remove the installed + files again. In practice, not all packages have tested that + uninstallation works correctly, even though it is required by the + GNU Coding Standards. + + 8. Some packages, particularly those that use Automake, provide 'make + distcheck', which can by used by developers to test that all other + targets like 'make install' and 'make uninstall' work correctly. + This target is generally not run by end users. + Compilers and Options =====================
Some systems require unusual options for compilation or linking that -the `configure' script does not know about. You can give `configure' -initial values for variables by setting them in the environment. Using -a Bourne-compatible shell, you can do that on the command line like -this: - CC=c89 CFLAGS=-O2 LIBS=-lposix ./configure +the 'configure' script does not know about. Run './configure --help' +for details on some of the pertinent environment variables. + + You can give 'configure' initial values for configuration parameters +by setting variables in the command line or in the environment. Here is +an example:
-Or on systems that have the `env' program, you can do it like this: - env CPPFLAGS=-I/usr/local/include LDFLAGS=-s ./configure + ./configure CC=c99 CFLAGS=-g LIBS=-lposix + + *Note Defining Variables::, for more details.
Compiling For Multiple Architectures ====================================
You can compile the package for more than one kind of computer at the same time, by placing the object files for each architecture in their -own directory. To do this, you must use a version of `make' that -supports the `VPATH' variable, such as GNU `make'. `cd' to the +own directory. To do this, you can use GNU 'make'. 'cd' to the directory where you want the object files and executables to go and run -the `configure' script. `configure' automatically checks for the -source code in the directory that `configure' is in and in `..'. +the 'configure' script. 'configure' automatically checks for the source +code in the directory that 'configure' is in and in '..'. This is known +as a "VPATH" build. + + With a non-GNU 'make', it is safer to compile the package for one +architecture at a time in the source code directory. After you have +installed the package for one architecture, use 'make distclean' before +reconfiguring for another architecture. + + On MacOS X 10.5 and later systems, you can create libraries and +executables that work on multiple system types--known as "fat" or +"universal" binaries--by specifying multiple '-arch' options to the +compiler but only a single '-arch' option to the preprocessor. Like +this:
- If you have to use a `make' that does not supports the `VPATH' -variable, you have to compile the package for one architecture at a time -in the source code directory. After you have installed the package for -one architecture, use `make distclean' before reconfiguring for another -architecture. + ./configure CC="gcc -arch i386 -arch x86_64 -arch ppc -arch ppc64" \ + CXX="g++ -arch i386 -arch x86_64 -arch ppc -arch ppc64" \ + CPP="gcc -E" CXXCPP="g++ -E" + + This is not guaranteed to produce working output in all cases, you +may have to build one architecture at a time and combine the results +using the 'lipo' tool if you have problems.
Installation Names ==================
- By default, `make install' will install the package's files in -`/usr/local/bin', `/usr/local/man', etc. You can specify an -installation prefix other than `/usr/local' by giving `configure' the -option `--prefix=PATH'. + By default, 'make install' installs the package's commands under +'/usr/local/bin', include files under '/usr/local/include', etc. You +can specify an installation prefix other than '/usr/local' by giving +'configure' the option '--prefix=PREFIX', where PREFIX must be an +absolute file name.
You can specify separate installation prefixes for architecture-specific files and architecture-independent files. If you -give `configure' the option `--exec-prefix=PATH', the package will use -PATH as the prefix for installing programs and libraries. -Documentation and other data files will still use the regular prefix. +pass the option '--exec-prefix=PREFIX' to 'configure', the package uses +PREFIX as the prefix for installing programs and libraries. +Documentation and other data files still use the regular prefix.
In addition, if you use an unusual directory layout you can give -options like `--bindir=PATH' to specify different values for particular -kinds of files. Run `configure --help' for a list of the directories -you can set and what kinds of files go in them. - - If the package supports it, you can cause programs to be installed -with an extra prefix or suffix on their names by giving `configure' the -option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'. +options like '--bindir=DIR' to specify different values for particular +kinds of files. Run 'configure --help' for a list of the directories +you can set and what kinds of files go in them. In general, the default +for these options is expressed in terms of '${prefix}', so that +specifying just '--prefix' will affect all of the other directory +specifications that were not explicitly provided. + + The most portable way to affect installation locations is to pass the +correct locations to 'configure'; however, many packages provide one or +both of the following shortcuts of passing variable assignments to the +'make install' command line to change installation locations without +having to reconfigure or recompile. + + The first method involves providing an override variable for each +affected directory. For example, 'make install +prefix=/alternate/directory' will choose an alternate location for all +directory configuration variables that were expressed in terms of +'${prefix}'. Any directories that were specified during 'configure', +but not in terms of '${prefix}', must each be overridden at install time +for the entire installation to be relocated. The approach of makefile +variable overrides for each directory variable is required by the GNU +Coding Standards, and ideally causes no recompilation. However, some +platforms have known limitations with the semantics of shared libraries +that end up requiring recompilation when using this method, particularly +noticeable in packages that use GNU Libtool. + + The second method involves providing the 'DESTDIR' variable. For +example, 'make install DESTDIR=/alternate/directory' will prepend +'/alternate/directory' before all installation names. The approach of +'DESTDIR' overrides is not required by the GNU Coding Standards, and +does not work on platforms that have drive letters. On the other hand, +it does better at avoiding recompilation issues, and works well even +when some directory options were not specified in terms of '${prefix}' +at 'configure' time.
Optional Features =================
- Some packages pay attention to `--enable-FEATURE' options to -`configure', where FEATURE indicates an optional part of the package. -They may also pay attention to `--with-PACKAGE' options, where PACKAGE -is something like `gnu-as' or `x' (for the X Window System). The -`README' should mention any `--enable-' and `--with-' options that the + If the package supports it, you can cause programs to be installed +with an extra prefix or suffix on their names by giving 'configure' the +option '--program-prefix=PREFIX' or '--program-suffix=SUFFIX'. + + Some packages pay attention to '--enable-FEATURE' options to +'configure', where FEATURE indicates an optional part of the package. +They may also pay attention to '--with-PACKAGE' options, where PACKAGE +is something like 'gnu-as' or 'x' (for the X Window System). The +'README' should mention any '--enable-' and '--with-' options that the package recognizes.
- For packages that use the X Window System, `configure' can usually + For packages that use the X Window System, 'configure' can usually find the X include and library files automatically, but if it doesn't, -you can use the `configure' options `--x-includes=DIR' and -`--x-libraries=DIR' to specify their locations. +you can use the 'configure' options '--x-includes=DIR' and +'--x-libraries=DIR' to specify their locations. + + Some packages offer the ability to configure how verbose the +execution of 'make' will be. For these packages, running './configure +--enable-silent-rules' sets the default to minimal output, which can be +overridden with 'make V=1'; while running './configure +--disable-silent-rules' sets the default to verbose, which can be +overridden with 'make V=0'. + +Particular systems +================== + + On HP-UX, the default C compiler is not ANSI C compatible. If GNU CC +is not installed, it is recommended to use the following options in +order to use an ANSI C compiler: + + ./configure CC="cc -Ae -D_XOPEN_SOURCE=500" + +and if that doesn't work, install pre-built binaries of GCC for HP-UX. + + HP-UX 'make' updates targets which have the same timestamps as their +prerequisites, which makes it generally unusable when shipped generated +files such as 'configure' are involved. Use GNU 'make' instead. + + On OSF/1 a.k.a. Tru64, some versions of the default C compiler cannot +parse its '<wchar.h>' header file. The option '-nodtk' can be used as a +workaround. If GNU CC is not installed, it is therefore recommended to +try + + ./configure CC="cc" + +and if that doesn't work, try + + ./configure CC="cc -nodtk" + + On Solaris, don't put '/usr/ucb' early in your 'PATH'. This +directory contains several dysfunctional programs; working variants of +these programs are available in '/usr/bin'. So, if you need '/usr/ucb' +in your 'PATH', put it _after_ '/usr/bin'. + + On Haiku, software installed for all users goes in '/boot/common', +not '/usr/local'. It is recommended to use the following options: + + ./configure --prefix=/boot/common
Specifying the System Type ==========================
- There may be some features `configure' can not figure out -automatically, but needs to determine by the type of host the package -will run on. Usually `configure' can figure that out, but if it prints -a message saying it can not guess the host type, give it the -`--host=TYPE' option. TYPE can either be a short name for the system -type, such as `sun4', or a canonical name with three fields: + There may be some features 'configure' cannot figure out +automatically, but needs to determine by the type of machine the package +will run on. Usually, assuming the package is built to be run on the +_same_ architectures, 'configure' can figure that out, but if it prints +a message saying it cannot guess the machine type, give it the +'--build=TYPE' option. TYPE can either be a short name for the system +type, such as 'sun4', or a canonical name which has the form: + CPU-COMPANY-SYSTEM
-See the file `config.sub' for the possible values of each field. If -`config.sub' isn't included in this package, then this package doesn't -need to know the host type. +where SYSTEM can have one of these forms: + + OS + KERNEL-OS + + See the file 'config.sub' for the possible values of each field. If +'config.sub' isn't included in this package, then this package doesn't +need to know the machine type. + + If you are _building_ compiler tools for cross-compiling, you should +use the option '--target=TYPE' to select the type of system they will +produce code for.
- If you are building compiler tools for cross-compiling, you can also -use the `--target=TYPE' option to select the type of system they will -produce code for and the `--build=TYPE' option to select the type of -system on which you are compiling the package. + If you want to _use_ a cross compiler, that generates code for a +platform different from the build platform, you should specify the +"host" platform (i.e., that on which the generated programs will +eventually be run) with '--host=TYPE'.
Sharing Defaults ================
- If you want to set default values for `configure' scripts to share, -you can create a site shell script called `config.site' that gives -default values for variables like `CC', `cache_file', and `prefix'. -`configure' looks for `PREFIX/share/config.site' if it exists, then -`PREFIX/etc/config.site' if it exists. Or, you can set the -`CONFIG_SITE' environment variable to the location of the site script. -A warning: not all `configure' scripts look for a site script. + If you want to set default values for 'configure' scripts to share, +you can create a site shell script called 'config.site' that gives +default values for variables like 'CC', 'cache_file', and 'prefix'. +'configure' looks for 'PREFIX/share/config.site' if it exists, then +'PREFIX/etc/config.site' if it exists. Or, you can set the +'CONFIG_SITE' environment variable to the location of the site script. +A warning: not all 'configure' scripts look for a site script.
-Operation Controls +Defining Variables ==================
- `configure' recognizes the following options to control how it + Variables not defined in a site shell script can be set in the +environment passed to 'configure'. However, some packages may run +configure again during the build, and the customized values of these +variables may be lost. In order to avoid this problem, you should set +them in the 'configure' command line, using 'VAR=value'. For example: + + ./configure CC=/usr/local2/bin/gcc + +causes the specified 'gcc' to be used as the C compiler (unless it is +overridden in the site shell script). + +Unfortunately, this technique does not work for 'CONFIG_SHELL' due to an +Autoconf limitation. Until the limitation is lifted, you can use this +workaround: + + CONFIG_SHELL=/bin/bash ./configure CONFIG_SHELL=/bin/bash + +'configure' Invocation +====================== + + 'configure' recognizes the following options to control how it operates.
-`--cache-file=FILE' - Use and save the results of the tests in FILE instead of - `./config.cache'. Set FILE to `/dev/null' to disable caching, for - debugging `configure'. +'--help' +'-h' + Print a summary of all of the options to 'configure', and exit.
-`--help' - Print a summary of the options to `configure', and exit. +'--help=short' +'--help=recursive' + Print a summary of the options unique to this package's + 'configure', and exit. The 'short' variant lists options used only + in the top level, while the 'recursive' variant lists options also + present in any nested packages.
-`--quiet' -`--silent' -`-q' +'--version' +'-V' + Print the version of Autoconf used to generate the 'configure' + script, and exit. + +'--cache-file=FILE' + Enable the cache: use and save the results of the tests in FILE, + traditionally 'config.cache'. FILE defaults to '/dev/null' to + disable caching. + +'--config-cache' +'-C' + Alias for '--cache-file=config.cache'. + +'--quiet' +'--silent' +'-q' Do not print messages saying which checks are being made. To - suppress all normal output, redirect it to `/dev/null' (any error + suppress all normal output, redirect it to '/dev/null' (any error messages will still be shown).
-`--srcdir=DIR' +'--srcdir=DIR' Look for the package's source code in directory DIR. Usually - `configure' can determine that directory automatically. + 'configure' can determine that directory automatically.
-`--version' - Print the version of Autoconf used to generate the `configure' - script, and exit. +'--prefix=DIR' + Use DIR as the installation prefix. *note Installation Names:: for + more details, including other options available for fine-tuning the + installation locations. + +'--no-create' +'-n' + Run the configure checks, but stop before creating any output + files.
-`configure' also accepts some other, not widely useful, options. +'configure' also accepts some other, not widely useful, options. Run +'configure --help' for more details.
Modified: Makefile.am 20 lines changed, 5 insertions(+), 15 deletions(-) =================================================================== @@ -21,26 +21,14 @@ EXTRA_DIST = \ HACKING \ README.I18N \ README.Packagers \ - intltool-extract.in \ - intltool-merge.in \ - intltool-update.in \ $(WIN32_BUILD_FILES)
DISTCLEANFILES = \ - geany.desktop \ - intltool-extract \ - intltool-merge \ - intltool-update + geany.desktop
uninstall-local: rm -rf $(DESTDIR)$(pkgdatadir);
-# Remove po/.intltool-merge-cache.lock on "distcheck" which is left over by various incorrectly -# patched versions of intltool, e.g. https://bugs.archlinux.org/task/67098 or -# https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=991623 -distclean-local: - rm -f $(top_builddir)/po/.intltool-merge-cache.lock - # manually install some files under another name install-data-local: $(mkinstalldirs) $(DESTDIR)$(pkgdatadir) @@ -85,6 +73,8 @@ pkgconfig_DATA = geany.pc pkgconfigdir = $(libdir)/pkgconfig
desktopdir = $(datadir)/applications -desktop_in_files = geany.desktop +desktop_in_files = geany.desktop.in desktop_DATA = $(desktop_in_files:.desktop.in=.desktop) -@INTLTOOL_DESKTOP_RULE@ + +$(desktop_DATA): $(desktop_in_files) $(wildcard $(top_srcdir)/po/*.po) + $(AM_V_GEN)$(MSGFMT) --desktop --template $< -d $(top_srcdir)/po -o $@
Modified: README 8 lines changed, 4 insertions(+), 4 deletions(-) =================================================================== @@ -78,10 +78,10 @@ and open the online version instead when requested. Installing from a Git clone +++++++++++++++++++++++++++
-Install Autotools (*automake*, *autoconf* and *libtool*), *intltool*, -and the GLib development files **before** running any of the following -commands, as well as *rst2html* from Docutils (see above for details). -Then, run ``./autogen.sh`` and then follow the instructions for +Install Autotools (*autopoint*, *automake*, *autoconf* and *libtool*), +*gettext*, and the GLib development files **before** running any of the +following commands, as well as *rst2html* from Docutils (see above for +details). Then, run ``./autogen.sh`` and then follow the instructions for `installing from a release tarball`_.
Installing from a release tarball
Modified: autogen.sh 67 lines changed, 3 insertions(+), 64 deletions(-) =================================================================== @@ -1,6 +1,8 @@ #!/bin/sh # Run this to generate all the initial makefiles, etc.
+set -e + srcdir=`dirname $0` test -z "$srcdir" && srcdir=.
@@ -11,39 +13,6 @@ DIE=0 exit 1 }
-(autoconf --version) < /dev/null > /dev/null 2>&1 || { - echo - echo "**Error**: You must have `autoconf' installed." - echo "Download the appropriate package for your distribution," - echo "or get the source tarball at ftp://ftp.gnu.org/pub/gnu/" - DIE=1 -} - -(intltoolize --version) < /dev/null > /dev/null 2>&1 || { - echo - echo "**Error**: You must have `intltool' installed." - echo "You can get it from:" - echo " ftp://ftp.gnome.org/pub/GNOME/" - DIE=1 -} - -(glib-gettextize --version) < /dev/null > /dev/null 2>&1 || { - echo - echo "**Error**: You must have `glib' installed." - echo "You can get it from: ftp://ftp.gtk.org/pub/gtk" - DIE=1 -} - -(libtoolize --version) < /dev/null > /dev/null 2>&1 || { - (glibtoolize --version) < /dev/null > /dev/null 2>&1 || { - echo - echo "**Error**: You must have `libtool' installed." - echo "You can get it from:" - echo " http://www.gnu.org/software/libtool/" - DIE=1 - } -} - (pkg-config --version) < /dev/null > /dev/null 2>&1 || { echo echo "You must have pkg-config installed to compile $package." @@ -52,28 +21,6 @@ DIE=0 DIE=1 }
-(automake --version) < /dev/null > /dev/null 2>&1 || { - echo - echo "**Error**: You must have `automake' (1.7 or later) installed." - echo "You can get it from: ftp://ftp.gnu.org/pub/gnu/" - DIE=1 - NO_AUTOMAKE=yes -} - - -# if no automake, don't bother testing for aclocal -test -n "$NO_AUTOMAKE" || (aclocal --version) < /dev/null > /dev/null 2>&1 || { - echo - echo "**Error**: Missing `aclocal'. The version of `automake'" - echo "installed doesn't appear recent enough." - echo "You can get automake from ftp://ftp.gnu.org/pub/gnu/" - DIE=1 -} - -if test "$DIE" -eq 1; then - exit 1 -fi - if test -z "$*" -a "$NOCONFIGURE" != 1; then echo "**Warning**: I am going to run `configure' with no arguments." echo "If you wish to pass any to it, please specify them on the" @@ -83,19 +30,11 @@ fi
echo "Processing configure.ac"
-test -d build-aux || mkdir build-aux -echo "no" | glib-gettextize --force --copy -intltoolize --copy --force --automake -libtoolize --copy --force || glibtoolize --copy --force -aclocal -I m4 -autoheader -automake --add-missing --copy --gnu -autoconf +autoreconf --force --install --verbose
if [ "$NOCONFIGURE" = 1 ]; then echo "Done. configure skipped." exit 0; fi echo "Running $srcdir/configure $@ ..." $srcdir/configure "$@" && echo "Now type 'make' to compile." || exit 1 -
Modified: configure.ac 8 lines changed, 6 insertions(+), 2 deletions(-) =================================================================== @@ -9,6 +9,9 @@ AC_CONFIG_MACRO_DIR([m4]) AM_INIT_AUTOMAKE([1.11 -Wall parallel-tests subdir-objects]) AC_CONFIG_HEADERS([config.h])
+AM_GNU_GETTEXT_VERSION([0.19.8]) +AM_GNU_GETTEXT([external]) + m4_ifdef([AM_SILENT_RULES],[AM_SILENT_RULES([yes])])
GEANY_PREFIX @@ -122,13 +125,14 @@ GEANY_CHECK_VTE GEANY_CHECK_MAC_INTEGRATION GEANY_CHECK_THE_FORCE dnl hehe
-# i18n -GEANY_I18N +AC_SUBST([GETTEXT_PACKAGE],[$PACKAGE]) +AC_DEFINE_UNQUOTED([GETTEXT_PACKAGE], ["$PACKAGE"], [Gettext package.])
# double eval since datarootdir is usually defined as ${prefix}/share AM_COND_IF([MINGW], [pkgdatadir='${prefix}/data'], [pkgdatadir='${datarootdir}/geany']) +AM_COND_IF([MINGW],[LIBS="$LIBS -liconv"]) AC_SUBST([GEANY_DATA_DIR], [$(eval echo $(eval echo $pkgdatadir))]) AC_SUBST([pkgdatadir])
Modified: doc/plugins.dox 2 lines changed, 1 insertions(+), 1 deletions(-) =================================================================== @@ -159,7 +159,7 @@ following. First you need to have Geany installed. Then install the development files for GTK and its dependencies. The easiest way to do this is to use your distribution's package management system, e.g. on Debian and Ubuntu systems you can use -@code apt-get install libgtk-3-dev intltool @endcode +@code apt-get install libgtk-3-dev autoconf automake autopoint gettext @endcode This will install all necessary files to be able to compile plugins for Geany. On other distributions, the package names and commands to use may differ.
Modified: geany.desktop.in 8 lines changed, 4 insertions(+), 4 deletions(-) =================================================================== @@ -1,13 +1,13 @@ [Desktop Entry] Type=Application Version=1.0 -_Name=Geany -_GenericName=Integrated Development Environment -_Comment=A fast and lightweight IDE using GTK+ +Name=Geany +GenericName=Integrated Development Environment +Comment=A fast and lightweight IDE using GTK+ Exec=geany %F Icon=geany Terminal=false Categories=GTK;Development;IDE;TextEditor; MimeType=text/plain;text/x-chdr;text/x-csrc;text/x-c++hdr;text/x-c++src;text/x-java;text/x-dsrc;text/x-pascal;text/x-perl;text/x-python;application/x-php;application/x-httpd-php3;application/x-httpd-php4;application/x-httpd-php5;application/xml;text/html;text/css;text/x-sql;text/x-diff; StartupNotify=true -_Keywords=Text;Editor; +Keywords=Text;Editor;
Modified: m4/geany-i18n.m4 26 lines changed, 0 insertions(+), 26 deletions(-) =================================================================== @@ -1,26 +0,0 @@ -dnl GEANY_I18N -dnl Setups I18N support. -dnl AC_DEFINEs and AC_SUBSTs GETTEXT_PACKAGE -AC_DEFUN([GEANY_I18N], -[ - AC_REQUIRE([AC_PROG_AWK]) - AC_REQUIRE([AC_PROG_INTLTOOL]) - - GETTEXT_PACKAGE="$PACKAGE" - AC_SUBST([GETTEXT_PACKAGE]) - AC_DEFINE_UNQUOTED([GETTEXT_PACKAGE], ["$GETTEXT_PACKAGE"], [Gettext package.]) - - ALL_LINGUAS=`cd "$srcdir/po" 2>/dev/null && ls *.po 2>/dev/null | $AWK 'BEGIN { FS="."; ORS=" " } { print $[]1 }'` - - AM_GLIB_GNU_GETTEXT - # workaround for intltool bug (http://bugzilla.gnome.org/show_bug.cgi?id=490845) - if test "x$MSGFMT" = "xno"; then - AC_MSG_ERROR([msgfmt not found. Please install the gettext package.]) - fi - - # intltool hack to define install_sh on Debian/Ubuntu systems - if test "x$install_sh" = "x"; then - install_sh="`pwd`/install-sh" - AC_SUBST([install_sh]) - fi -])
Modified: po/LINGUAS 1 lines changed, 1 insertions(+), 0 deletions(-) =================================================================== @@ -0,0 +1 @@ +ar ast be bg ca cs da de el en_GB es et eu fa fi fr gl he hi hu id ie it ja kk ko ku lb lt lv mn nl nn pl pt pt_BR ro ru sk sl sr sv tr uk vi zh_CN zh_TW
Modified: po/Makevars 82 lines changed, 82 insertions(+), 0 deletions(-) =================================================================== @@ -0,0 +1,82 @@ +# Makefile variables for PO directory in any package using GNU gettext. +# +# Copyright (C) 2003-2019 Free Software Foundation, Inc. +# This file is free software; the Free Software Foundation gives +# unlimited permission to use, copy, distribute, and modify it. + +# Usually the message domain is the same as the package name. +DOMAIN = $(PACKAGE) + +# These two variables depend on the location of this directory. +subdir = po +top_builddir = .. + +# These options get passed to xgettext. +XGETTEXT_OPTIONS = --keyword=_ --keyword=N_ --keyword=C_:1c,2 --keyword=NC_:1c,2 + +# This is the copyright holder that gets inserted into the header of the +# $(DOMAIN).pot file. Set this to the copyright holder of the surrounding +# package. (Note that the msgstr strings, extracted from the package's +# sources, belong to the copyright holder of the package.) Translators are +# expected to transfer the copyright for their translations to this person +# or entity, or to disclaim their copyright. The empty string stands for +# the public domain; in this case the translators are expected to disclaim +# their copyright. +COPYRIGHT_HOLDER = The Geany contributors + +# This tells whether or not to prepend "GNU " prefix to the package +# name that gets inserted into the header of the $(DOMAIN).pot file. +# Possible values are "yes", "no", or empty. If it is empty, try to +# detect it automatically by scanning the files in $(top_srcdir) for +# "GNU packagename" string. +PACKAGE_GNU = no + +# This is the email address or URL to which the translators shall report +# bugs in the untranslated strings: +# - Strings which are not entire sentences, see the maintainer guidelines +# in the GNU gettext documentation, section 'Preparing Strings'. +# - Strings which use unclear terms or require additional context to be +# understood. +# - Strings which make invalid assumptions about notation of date, time or +# money. +# - Pluralisation problems. +# - Incorrect English spelling. +# - Incorrect formatting. +# It can be your email address, or a mailing list address where translators +# can write to without being subscribed, or the URL of a web page through +# which the translators can contact you. +MSGID_BUGS_ADDRESS = https://github.com/geany/geany/issues + +# This is the list of locale categories, beyond LC_MESSAGES, for which the +# message catalogs shall be used. It is usually empty. +EXTRA_LOCALE_CATEGORIES = + +# This tells whether the $(DOMAIN).pot file contains messages with an 'msgctxt' +# context. Possible values are "yes" and "no". Set this to yes if the +# package uses functions taking also a message context, like pgettext(), or +# if in $(XGETTEXT_OPTIONS) you define keywords with a context argument. +USE_MSGCTXT = no + +# These options get passed to msgmerge. +# Useful options are in particular: +# --previous to keep previous msgids of translated messages, +# --quiet to reduce the verbosity. +MSGMERGE_OPTIONS = + +# These options get passed to msginit. +# If you want to disable line wrapping when writing PO files, add +# --no-wrap to MSGMERGE_OPTIONS, XGETTEXT_OPTIONS, and +# MSGINIT_OPTIONS. +MSGINIT_OPTIONS = + +# This tells whether or not to regenerate a PO file when $(DOMAIN).pot +# has changed. Possible values are "yes" and "no". Set this to no if +# the POT file is checked in the repository and the version control +# program ignores timestamps. +PO_DEPENDS_ON_POT = yes + +# This tells whether or not to forcibly update $(DOMAIN).pot and +# regenerate PO files on "make dist". Possible values are "yes" and +# "no". Set this to no if the POT file and PO files are maintained +# externally. +DIST_DEPENDS_ON_UPDATE_PO = yes
-------------- This E-Mail was brought to you by github_commit_mail.py (Source: https://github.com/geany/infrastructure).