Steps to reproduce:
1. With no project open, open some files
2. Open project A
3. Without closing project A first, open project B
4. Close project B
5. The originally open files from (1) are gone
Note that simple
1. With no project open, open some files
2. Open project A
3. Close project A
restores the session correctly.
I was wondering whether some of the session-split patches caused this but I checked out Geany 1.35 and it contained the same bug. I haven't investigated more so far.
--
Reply to this email directly or view it on GitHub:
https://github.com/geany/geany/issues/3897
You are receiving this because you are subscribed to this thread.
Message ID: <geany/geany/issues/3897(a)github.com>
Steps to reproduce:
1. With no project open, open some files
2. Open project A
3. Without closing project A first, open project B
4. Close project B
5. The originally open files from (1) are gone
The problem is that when project A closes and all its files are closed, load_config() gets called which contains
configuration_save_default_session();
This saves the session with all files closed and replaces the original session.
This patch modifies the code to call configuration_save_default_session() only when there are some open tabs so the above problem gets solved.
Even though I was worried that this would break saving default session when all its files get closed and then a project is loaded, it doesn't seem to be the case (I haven't investigated deep enough why).
An alternative to this approach would be to pass a boolean as a parameter of quite many functions and propagate the information whether project close preceded its opening but it introduces a much bigger diff and makes the complicated session opening stuff even wilder.
Fixes #3897.
You can view, comment on, or merge this pull request online at:
https://github.com/geany/geany/pull/3898
-- Commit Summary --
* Fix a problem when multiple project opens clear the default session
-- File Changes --
M src/project.c (3)
-- Patch Links --
https://github.com/geany/geany/pull/3898.patchhttps://github.com/geany/geany/pull/3898.diff
--
Reply to this email directly or view it on GitHub:
https://github.com/geany/geany/pull/3898
You are receiving this because you are subscribed to this thread.
Message ID: <geany/geany/pull/3898(a)github.com>
Github actions can do Linux (Ubuntu 16.04, 18.04 and 20.04) and windows and OSX Catalina and Big Sur so testing could check all platforms.
This is a placeholder issue, not sure what is _actually_ involved, but somebody who knows might replace this with a checklist.
PS IIUC github actions can run docker so the @eht16 one could be used maybe?
--
You are receiving this because you are subscribed to this thread.
Reply to this email directly or view it on GitHub:
https://github.com/geany/geany/issues/2671
For example, `clang-format`. I'm finding a code formatter plugin for Geany. But all of the projects I encountered are unmaintained.
--
Reply to this email directly or view it on GitHub:
https://github.com/geany/geany/issues/3782
You are receiving this because you are subscribed to this thread.
Message ID: <geany/geany/issues/3782(a)github.com>
Extends [#1233](https://github.com/geany/geany-plugins/pull/1233) to add support for Lua 5.1 and LuaJIT by adding compatibility functions/defines. The build script is fixed to not ignore the `--with-lua-pkg` option and to recognize Lua variants: lua, lua53, lua54, lua52, luajit, lua51 (currently in this order). Systems that use a different basename will have to explicitly specify the name, eg lua5.1 or lua-5.1, during configure. To change variants, reconfigure and rebuild.
```
./configure --with-lua-pkg=[lua]
make -C geanylua clean
make -C geanylua
```
Supercedes #1231, #1233, #1235. Resolves #1228, #1133.
You can view, comment on, or merge this pull request online at:
https://github.com/geany/geany-plugins/pull/1238
-- Commit Summary --
* GeanyLua: Use luaL_Reg instead of luaL_reg
* GeanyLua: Don't ignore with-lua-pkg configure option
* GeanyLua: Add support for Lua 5.2+
* GeanyLua: Add compatibility for Lua 5.1 and LuaJIT
-- File Changes --
M build/geanylua.m4 (28)
M geanylua/Makefile.am (2)
M geanylua/glspi.h (2)
M geanylua/glspi_app.c (4)
A geanylua/glspi_compat.c (55)
A geanylua/glspi_compat.h (28)
M geanylua/glspi_dlg.c (6)
M geanylua/glspi_doc.c (4)
M geanylua/glspi_init.c (4)
M geanylua/glspi_kfile.c (10)
M geanylua/glspi_run.c (30)
M geanylua/glspi_sci.c (6)
M geanylua/gsdlg_lua.c (11)
-- Patch Links --
https://github.com/geany/geany-plugins/pull/1238.patchhttps://github.com/geany/geany-plugins/pull/1238.diff
--
Reply to this email directly or view it on GitHub:
https://github.com/geany/geany-plugins/pull/1238
You are receiving this because you are subscribed to this thread.
Message ID: <geany/geany-plugins/pull/1238(a)github.com>
In Preferences -> Files there is an option "Ensure new line at file end" that, as far as I understand, is supposed to enable/disable adding of a new line in the end of the file if the last line is not empty. However, even when this option is disabled (unticked), if the last line is not empty and you save the file, Geany adds a new line after the last one.
--
You are receiving this because you are subscribed to this thread.
Reply to this email directly or view it on GitHub:
https://github.com/geany/geany/issues/2310
if i hit ctrl+f, I don't immediately start typing in the field, rather, I continue typing wherever I previously was, the dialog just appears.
I'm on geany-gtk3 on arch, if that helps. I might just be an idiot and changed a setting though.
--
You are receiving this because you are subscribed to this thread.
Reply to this email directly or view it on GitHub:
https://github.com/geany/geany/issues/1623
Unfortunately Geany has huge problems with built-in SFTP over Nautilus/Nemo. It hangs, freezes and/or suddenly closes. I can't really say why, since I even used `TCPKeepAlive` to keep the sessions alive, but this doesn't fix the problems.
Does Geany even support using it that way?
--
Reply to this email directly or view it on GitHub:
https://github.com/geany/geany/issues/3939
You are receiving this because you are subscribed to this thread.
Message ID: <geany/geany/issues/3939(a)github.com>
字体，ubuntu mono 、fira code 等字体输入中文时会乱码。monospace mono 字体不会。
相关信息：
（machine translation）
Fonts such as Ubuntu Mono and Fira Code may cause garbled characters when entering Chinese. Monospace Mono font does not work.
Related information:
> Geany: Geany 2.0, Chinese (Simplified)_China.936
> Geany: GTK 3.24.39, GLib 2.78.0
> Geany: OS: Windows 10 22H2
monospace font
fira_code font
ubuntu mono font
--
Reply to this email directly or view it on GitHub:
https://github.com/geany/geany/issues/3862
You are receiving this because you are subscribed to this thread.
Message ID: <geany/geany/issues/3862(a)github.com>
What it says in the title. I'd like for the files in the Documents sidebar to be renamable from that location.
---
You are receiving this because you are subscribed to this thread.
Reply to this email directly or view it on GitHub:
https://github.com/geany/geany/issues/1138