After running ./autogen.sh & installing intltool installation crashes:
You should add the contents of '/usr/share/aclocal/intltool.m4' to 'aclocal.m4'.
autoreconf: Entering directory `.'
autoreconf: configure.ac: not using Gettext
autoreconf: running: aclocal --force -I build/cache -I build -I build/bundled -I geanypy/m4 --install
build/i18n.m4:20: warning: macro 'AM_GLIB_GNU_GETTEXT' not found in library
aclocal: installing 'build/cache/nls.m4' from '/usr/share/aclocal/nls.m4'
aclocal: installing 'build/cache/pkg.m4' from '/usr/share/aclocal/pkg.m4'
autoreconf: configure.ac: tracing
autoreconf: configure.ac: not using Libtool
autoreconf: running: /usr/bin/autoconf --force
configure.ac:15: error: possibly undefined macro: AC_DISABLE_STATIC
If this token and others are legitimate, please use m4_pattern_allow.
See the Autoconf documentation.
configure.ac:16: error: possibly undefined macro: AC_PROG_LIBTOOL
configure:5255: error: possibly undefined macro: AM_GLIB_GNU_GETTEXT
autoreconf: /usr/bin/autoconf failed with exit status: 1
Any better method to install it?
---
You are receiving this because you are subscribed to this thread.
Reply to this email directly or view it on GitHub:
https://github.com/geany/geany-plugins/issues/420
I would like to have tab with gdb cli, sometimes I need to produce specific debugging command, direct access to gdb would be useful
---
Reply to this email directly or view it on GitHub:
https://github.com/geany/geany-plugins/issues/336
With "Visueller Zeilenumbruch" (Visual Linebreak/LineWrap/Wordwrap?) activated, sometimes lines and line numbers are displayed twice or not at all.
How to do it with double lines:
A) Create a document with 6 lines:
1: some content
2: blank
3: some other content
4: blank
5: some other content
6: blank
B) type more content in line 1 until the visual linebreak kicks in. then remove some content from line one until the text fits again into line 1. now line 3 is displayed twice. no navigate through the lines and watch line 3 being corrected and line 5 being displayed twice.
Sorry, I do not have a howto for missing lines. Will provide it once I have it.
Version is 1.30.1
--
You are receiving this because you are subscribed to this thread.
Reply to this email directly or view it on GitHub:
https://github.com/geany/geany/issues/1521
If you load geany scope, load a simple "Hello world" software written in C compiled with -g, and you start the execution with geany scope you obtain a blank window without text or buttons and geany freeze.. so geany scope is unusable...
geany scope 1.27 in Fedora 24 with italian language
reported in https://bugzilla.redhat.com/show_bug.cgi?id=1341107
---
You are receiving this because you are subscribed to this thread.
Reply to this email directly or view it on GitHub:
https://github.com/geany/geany-plugins/issues/433
Linux: Ubuntu trusty (3.13.0-68-generic / i686)
Geany 1.25 (built on Jul 13 2015 with GTK 2.24.23, GLib 2.40.2)
Installing from Ubuntu repositories (geany v1.23) caused the same problem, so I tried installing from ppa:geany-dev/ppa. Problem remains. All packages starting with "geany" installed, except for geany-plugin-markdown, geany-plugin-scope.
I have tried debugging a python script, (setting debug target to .py file and .pyc) - both gave me "Error laoding file" when I press the Start button
I then tried debugging a bash script (.sh) - same problem.
Then I downloaded a sample .c source file, compiled it and tried to debug it - same problem.
Starting geany from shell in order to try to get some output or stack trace did not help much. All I got was the following: (output on console immediately after pressing "OK" on "Error loading file" dialog)
(geany:30320): GLib-CRITICAL **: g_string_free: assertion 'string != NULL' failed
(geany:30320): GLib-CRITICAL **: g_string_free: assertion 'string != NULL' failed
(geany:30320): GLib-CRITICAL **: g_string_free: assertion 'string != NULL' failed
(geany:30320): GLib-CRITICAL **: g_string_free: assertion 'string != NULL' failed
(geany:30320): GLib-CRITICAL **: g_string_free: assertion 'string != NULL' failed
(geany:30320): GLib-CRITICAL **: g_string_free: assertion 'string != NULL' failed
(geany:30320): GLib-CRITICAL **: g_string_free: assertion 'string != NULL' failed
(geany:30320): GLib-CRITICAL **: g_string_free: assertion 'string != NULL' failed
(geany:30320): GLib-CRITICAL **: g_string_free: assertion 'string != NULL' failed
(geany:30320): GLib-CRITICAL **: g_string_free: assertion 'string != NULL' failed
(geany:30320): GLib-CRITICAL **: g_hash_table_destroy: assertion 'hash_table != NULL' failed
Is there any way I can get a decent stack trace of what caused the "Error loading file"?
---
Reply to this email directly or view it on GitHub:
https://github.com/geany/geany-plugins/issues/309
You should implement the basic x command. I miss it a lot. E.g. 5x deletes 5 chars to the right, included the character under the cursor. If there are less than 5 chars from the current current position to the end of line, only that much chars are deleted.
--
You are receiving this because you are subscribed to this thread.
Reply to this email directly or view it on GitHub:
https://github.com/geany/geany-plugins/issues/818
in some cases, Geany doesn't detect file has been overwritten. If a file with the same name is (intentionally) copied from a different directory, Geany doesn't detect the file has changed.
This does not reproduce when the file is copied using `cp`. I've only tested with the 2 file managers listed below.
* To reproduce
Reproduces every time using Thunar 1.8.4 and PCMan 1.3.1
echo file1 > ./file1
mkdir tempdir
echo file2 > tempdir/file1
Open ./file1 in Geany
Use Thunar or PCMan to copy tempdir/file1 to ./file1
Switch back to Geany (note there will be no reload option).
```
16:56:32: Geany INFO : Geany 1.35 (git >= b8cdfddf), en_US.utf8
16:56:32: Geany INFO : GTK 3.24.5, GLib 2.58.3
16:56:32: Geany INFO : System data dir: /home/andy/local/share/geany
16:56:32: Geany INFO : User config dir: /home/andy/.config/geany
16:56:32: Geany INFO : Loaded GTK+ CSS theme '/home/andy/local/share/geany/geany.css'
16:56:32: Geany INFO : Loaded GTK+ CSS theme '/home/andy/local/share/geany/geany-3.20.css'
16:56:32: Geany INFO : System plugin path: /home/andy/local/lib/geany
16:56:32: Geany INFO : Added filetype Clojure (61).
16:56:32: Geany INFO : Added filetype Graphviz (62).
16:56:32: Geany INFO : Added filetype CUDA (63).
16:56:32: Geany INFO : Added filetype JSON (64).
16:56:32: Geany INFO : Added filetype Arduino (65).
16:56:32: Geany INFO : Added filetype Scala (66).
16:56:32: Geany INFO : Added filetype Genie (67).
16:56:32: Geany INFO : Added filetype Cython (68).
16:56:32: Geany INFO : Loaded libvte from libvte-2.91.so
16:56:32: Geany INFO : /home/andy/temp : None (UTF-8)
16:56:32: Geany INFO : /home/andy/file1 : None (UTF-8)
```
--
You are receiving this because you are subscribed to this thread.
Reply to this email directly or view it on GitHub:
https://github.com/geany/geany/issues/2133
You can view, comment on, or merge this pull request online at:
https://github.com/geany/geany/pull/2138
-- Commit Summary --
* Update Scintilla to version 3.10.4
-- File Changes --
M scintilla/Makefile.am (1)
M scintilla/gtk/Converter.h (14)
M scintilla/gtk/PlatGTK.cxx (393)
M scintilla/gtk/ScintillaGTK.cxx (773)
M scintilla/gtk/ScintillaGTK.h (49)
M scintilla/gtk/ScintillaGTKAccessible.cxx (100)
M scintilla/include/Platform.h (12)
M scintilla/include/SciLexer.h (12)
M scintilla/include/Scintilla.h (9)
M scintilla/include/Scintilla.iface (35)
M scintilla/lexers/LexCPP.cxx (163)
M scintilla/lexers/LexHaskell.cxx (1)
M scintilla/lexers/LexTCL.cxx (4)
M scintilla/lexlib/CharacterCategory.cxx (33)
M scintilla/lexlib/CharacterCategory.h (17)
M scintilla/lexlib/CharacterSet.h (12)
M scintilla/lexlib/StyleContext.cxx (1)
M scintilla/scintilla_changes.patch (7)
M scintilla/src/CallTip.cxx (2)
M scintilla/src/CaseConvert.cxx (8)
M scintilla/src/CaseFolder.cxx (2)
M scintilla/src/CaseFolder.h (2)
M scintilla/src/CharClassify.cxx (5)
M scintilla/src/ContractionState.cxx (8)
M scintilla/src/ContractionState.h (1)
M scintilla/src/DBCS.h (8)
M scintilla/src/Document.cxx (29)
M scintilla/src/Document.h (20)
M scintilla/src/EditModel.cxx (20)
M scintilla/src/EditModel.h (6)
M scintilla/src/EditView.cxx (51)
M scintilla/src/EditView.h (16)
M scintilla/src/Editor.cxx (137)
M scintilla/src/Editor.h (81)
M scintilla/src/ElapsedPeriod.h (2)
M scintilla/src/Indicator.cxx (8)
M scintilla/src/Indicator.h (8)
M scintilla/src/KeyMap.h (2)
M scintilla/src/LineMarker.cxx (68)
M scintilla/src/LineMarker.h (24)
M scintilla/src/MarginView.cxx (4)
M scintilla/src/MarginView.h (2)
M scintilla/src/PerLine.h (2)
M scintilla/src/PositionCache.cxx (25)
M scintilla/src/PositionCache.h (28)
M scintilla/src/RESearch.h (17)
M scintilla/src/ScintillaBase.cxx (9)
M scintilla/src/ScintillaBase.h (4)
M scintilla/src/Selection.cxx (2)
M scintilla/src/Selection.h (14)
M scintilla/src/Style.cxx (20)
M scintilla/src/Style.h (20)
M scintilla/src/UniConversion.cxx (31)
M scintilla/src/UniConversion.h (10)
A scintilla/src/UniqueString.cxx (55)
M scintilla/src/UniqueString.h (34)
M scintilla/src/ViewStyle.cxx (72)
M scintilla/src/ViewStyle.h (61)
M scintilla/src/XPM.h (17)
M scintilla/version.txt (2)
-- Patch Links --
https://github.com/geany/geany/pull/2138.patchhttps://github.com/geany/geany/pull/2138.diff
--
You are receiving this because you are subscribed to this thread.
Reply to this email directly or view it on GitHub:
https://github.com/geany/geany/pull/2138