Revision: 78
http://geany-plugins.svn.sourceforge.net/geany-plugins/?rev=78&view=rev
Author: yurand
Date: 2008-06-20 03:30:01 -0700 (Fri, 20 Jun 2008)
Log Message:
-----------
Added geanyvc plugin
Added Paths:
-----------
trunk/geanyvc/
trunk/geanyvc/.gitignore
trunk/geanyvc/COPYING
trunk/geanyvc/INSTALL
trunk/geanyvc/Makefile.am
trunk/geanyvc/README
trunk/geanyvc/THANKS
trunk/geanyvc/TODO
trunk/geanyvc/autogen.sh
trunk/geanyvc/commit.glade
trunk/geanyvc/configure.in
trunk/geanyvc/depcomp
trunk/geanyvc/externdiff.c
trunk/geanyvc/geanyvc.c
trunk/geanyvc/geanyvc.h
trunk/geanyvc/indent-all.sh
trunk/geanyvc/install/
trunk/geanyvc/install/.gitignore
trunk/geanyvc/install/PKGBUILD.in
trunk/geanyvc/install/ebuild.in
trunk/geanyvc/install/geninst.sh
trunk/geanyvc/install/setup.nsi.in
trunk/geanyvc/install-sh
trunk/geanyvc/makefile.win32
trunk/geanyvc/missing
trunk/geanyvc/po/
trunk/geanyvc/po/.gitignore
trunk/geanyvc/po/ChangeLog
trunk/geanyvc/po/LINGUAS
trunk/geanyvc/po/POTFILES.in
trunk/geanyvc/vc_bzr.c
trunk/geanyvc/vc_cvs.c
trunk/geanyvc/vc_git.c
trunk/geanyvc/vc_hg.c
trunk/geanyvc/vc_svk.c
trunk/geanyvc/vc_svn.c
Added: trunk/geanyvc/.gitignore
===================================================================
--- trunk/geanyvc/.gitignore (rev 0)
+++ trunk/geanyvc/.gitignore 2008-06-20 10:30:01 UTC (rev 78)
@@ -0,0 +1,23 @@
+autom4te.cache
+Makefile
+Makefile.in
+aclocal.m4
+config.log
+config.status
+config.guess
+config.sub
+configure
+.deps
+.libs
+*.o
+*.la
+*.lo
+/ChangeLog
+libtool
+*.tar.gz
+stamp-h1
+config.h
+config.h.in
+intltool-*
+mkinstalldirs
+ltmain.sh
Added: trunk/geanyvc/COPYING
===================================================================
--- trunk/geanyvc/COPYING (rev 0)
+++ trunk/geanyvc/COPYING 2008-06-20 10:30:01 UTC (rev 78)
@@ -0,0 +1,340 @@
+ GNU GENERAL PUBLIC LICENSE
+ Version 2, June 1991
+
+ Copyright (C) 1989, 1991 Free Software Foundation, Inc.
+ 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+ Preamble
+
+ The licenses for most software are designed to take away your
+freedom to share and change it. By contrast, the GNU General Public
+License is intended to guarantee your freedom to share and change free
+software--to make sure the software is free for all its users. This
+General Public License applies to most of the Free Software
+Foundation's software and to any other program whose authors commit to
+using it. (Some other Free Software Foundation software is covered by
+the GNU Library General Public License instead.) You can apply it to
+your programs, too.
+
+ When we speak of free software, we are referring to freedom, not
+price. Our General Public Licenses are designed to make sure that you
+have the freedom to distribute copies of free software (and charge for
+this service if you wish), that you receive source code or can get it
+if you want it, that you can change the software or use pieces of it
+in new free programs; and that you know you can do these things.
+
+ To protect your rights, we need to make restrictions that forbid
+anyone to deny you these rights or to ask you to surrender the rights.
+These restrictions translate to certain responsibilities for you if you
+distribute copies of the software, or if you modify it.
+
+ For example, if you distribute copies of such a program, whether
+gratis or for a fee, you must give the recipients all the rights that
+you have. You must make sure that they, too, receive or can get the
+source code. And you must show them these terms so they know their
+rights.
+
+ We protect your rights with two steps: (1) copyright the software, and
+(2) offer you this license which gives you legal permission to copy,
+distribute and/or modify the software.
+
+ Also, for each author's protection and ours, we want to make certain
+that everyone understands that there is no warranty for this free
+software. If the software is modified by someone else and passed on, we
+want its recipients to know that what they have is not the original, so
+that any problems introduced by others will not reflect on the original
+authors' reputations.
+
+ Finally, any free program is threatened constantly by software
+patents. We wish to avoid the danger that redistributors of a free
+program will individually obtain patent licenses, in effect making the
+program proprietary. To prevent this, we have made it clear that any
+patent must be licensed for everyone's free use or not licensed at all.
+
+ The precise terms and conditions for copying, distribution and
+modification follow.
+
+ GNU GENERAL PUBLIC LICENSE
+ TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
+
+ 0. This License applies to any program or other work which contains
+a notice placed by the copyright holder saying it may be distributed
+under the terms of this General Public License. The "Program", below,
+refers to any such program or work, and a "work based on the Program"
+means either the Program or any derivative work under copyright law:
+that is to say, a work containing the Program or a portion of it,
+either verbatim or with modifications and/or translated into another
+language. (Hereinafter, translation is included without limitation in
+the term "modification".) Each licensee is addressed as "you".
+
+Activities other than copying, distribution and modification are not
+covered by this License; they are outside its scope. The act of
+running the Program is not restricted, and the output from the Program
+is covered only if its contents constitute a work based on the
+Program (independent of having been made by running the Program).
+Whether that is true depends on what the Program does.
+
+ 1. You may copy and distribute verbatim copies of the Program's
+source code as you receive it, in any medium, provided that you
+conspicuously and appropriately publish on each copy an appropriate
+copyright notice and disclaimer of warranty; keep intact all the
+notices that refer to this License and to the absence of any warranty;
+and give any other recipients of the Program a copy of this License
+along with the Program.
+
+You may charge a fee for the physical act of transferring a copy, and
+you may at your option offer warranty protection in exchange for a fee.
+
+ 2. You may modify your copy or copies of the Program or any portion
+of it, thus forming a work based on the Program, and copy and
+distribute such modifications or work under the terms of Section 1
+above, provided that you also meet all of these conditions:
+
+ a) You must cause the modified files to carry prominent notices
+ stating that you changed the files and the date of any change.
+
+ b) You must cause any work that you distribute or publish, that in
+ whole or in part contains or is derived from the Program or any
+ part thereof, to be licensed as a whole at no charge to all third
+ parties under the terms of this License.
+
+ c) If the modified program normally reads commands interactively
+ when run, you must cause it, when started running for such
+ interactive use in the most ordinary way, to print or display an
+ announcement including an appropriate copyright notice and a
+ notice that there is no warranty (or else, saying that you provide
+ a warranty) and that users may redistribute the program under
+ these conditions, and telling the user how to view a copy of this
+ License. (Exception: if the Program itself is interactive but
+ does not normally print such an announcement, your work based on
+ the Program is not required to print an announcement.)
+
+These requirements apply to the modified work as a whole. If
+identifiable sections of that work are not derived from the Program,
+and can be reasonably considered independent and separate works in
+themselves, then this License, and its terms, do not apply to those
+sections when you distribute them as separate works. But when you
+distribute the same sections as part of a whole which is a work based
+on the Program, the distribution of the whole must be on the terms of
+this License, whose permissions for other licensees extend to the
+entire whole, and thus to each and every part regardless of who wrote it.
+
+Thus, it is not the intent of this section to claim rights or contest
+your rights to work written entirely by you; rather, the intent is to
+exercise the right to control the distribution of derivative or
+collective works based on the Program.
+
+In addition, mere aggregation of another work not based on the Program
+with the Program (or with a work based on the Program) on a volume of
+a storage or distribution medium does not bring the other work under
+the scope of this License.
+
+ 3. You may copy and distribute the Program (or a work based on it,
+under Section 2) in object code or executable form under the terms of
+Sections 1 and 2 above provided that you also do one of the following:
+
+ a) Accompany it with the complete corresponding machine-readable
+ source code, which must be distributed under the terms of Sections
+ 1 and 2 above on a medium customarily used for software interchange; or,
+
+ b) Accompany it with a written offer, valid for at least three
+ years, to give any third party, for a charge no more than your
+ cost of physically performing source distribution, a complete
+ machine-readable copy of the corresponding source code, to be
+ distributed under the terms of Sections 1 and 2 above on a medium
+ customarily used for software interchange; or,
+
+ c) Accompany it with the information you received as to the offer
+ to distribute corresponding source code. (This alternative is
+ allowed only for noncommercial distribution and only if you
+ received the program in object code or executable form with such
+ an offer, in accord with Subsection b above.)
+
+The source code for a work means the preferred form of the work for
+making modifications to it. For an executable work, complete source
+code means all the source code for all modules it contains, plus any
+associated interface definition files, plus the scripts used to
+control compilation and installation of the executable. However, as a
+special exception, the source code distributed need not include
+anything that is normally distributed (in either source or binary
+form) with the major components (compiler, kernel, and so on) of the
+operating system on which the executable runs, unless that component
+itself accompanies the executable.
+
+If distribution of executable or object code is made by offering
+access to copy from a designated place, then offering equivalent
+access to copy the source code from the same place counts as
+distribution of the source code, even though third parties are not
+compelled to copy the source along with the object code.
+
+ 4. You may not copy, modify, sublicense, or distribute the Program
+except as expressly provided under this License. Any attempt
+otherwise to copy, modify, sublicense or distribute the Program is
+void, and will automatically terminate your rights under this License.
+However, parties who have received copies, or rights, from you under
+this License will not have their licenses terminated so long as such
+parties remain in full compliance.
+
+ 5. You are not required to accept this License, since you have not
+signed it. However, nothing else grants you permission to modify or
+distribute the Program or its derivative works. These actions are
+prohibited by law if you do not accept this License. Therefore, by
+modifying or distributing the Program (or any work based on the
+Program), you indicate your acceptance of this License to do so, and
+all its terms and conditions for copying, distributing or modifying
+the Program or works based on it.
+
+ 6. Each time you redistribute the Program (or any work based on the
+Program), the recipient automatically receives a license from the
+original licensor to copy, distribute or modify the Program subject to
+these terms and conditions. You may not impose any further
+restrictions on the recipients' exercise of the rights granted herein.
+You are not responsible for enforcing compliance by third parties to
+this License.
+
+ 7. If, as a consequence of a court judgment or allegation of patent
+infringement or for any other reason (not limited to patent issues),
+conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License. If you cannot
+distribute so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you
+may not distribute the Program at all. For example, if a patent
+license would not permit royalty-free redistribution of the Program by
+all those who receive copies directly or indirectly through you, then
+the only way you could satisfy both it and this License would be to
+refrain entirely from distribution of the Program.
+
+If any portion of this section is held invalid or unenforceable under
+any particular circumstance, the balance of the section is intended to
+apply and the section as a whole is intended to apply in other
+circumstances.
+
+It is not the purpose of this section to induce you to infringe any
+patents or other property right claims or to contest validity of any
+such claims; this section has the sole purpose of protecting the
+integrity of the free software distribution system, which is
+implemented by public license practices. Many people have made
+generous contributions to the wide range of software distributed
+through that system in reliance on consistent application of that
+system; it is up to the author/donor to decide if he or she is willing
+to distribute software through any other system and a licensee cannot
+impose that choice.
+
+This section is intended to make thoroughly clear what is believed to
+be a consequence of the rest of this License.
+
+ 8. If the distribution and/or use of the Program is restricted in
+certain countries either by patents or by copyrighted interfaces, the
+original copyright holder who places the Program under this License
+may add an explicit geographical distribution limitation excluding
+those countries, so that distribution is permitted only in or among
+countries not thus excluded. In such case, this License incorporates
+the limitation as if written in the body of this License.
+
+ 9. The Free Software Foundation may publish revised and/or new versions
+of the General Public License from time to time. Such new versions will
+be similar in spirit to the present version, but may differ in detail to
+address new problems or concerns.
+
+Each version is given a distinguishing version number. If the Program
+specifies a version number of this License which applies to it and "any
+later version", you have the option of following the terms and conditions
+either of that version or of any later version published by the Free
+Software Foundation. If the Program does not specify a version number of
+this License, you may choose any version ever published by the Free Software
+Foundation.
+
+ 10. If you wish to incorporate parts of the Program into other free
+programs whose distribution conditions are different, write to the author
+to ask for permission. For software which is copyrighted by the Free
+Software Foundation, write to the Free Software Foundation; we sometimes
+make exceptions for this. Our decision will be guided by the two goals
+of preserving the free status of all derivatives of our free software and
+of promoting the sharing and reuse of software generally.
+
+ NO WARRANTY
+
+ 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
+FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN
+OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
+PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS
+TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE
+PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
+REPAIR OR CORRECTION.
+
+ 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
+REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
+INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
+OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
+TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
+YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
+PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGES.
+
+ END OF TERMS AND CONDITIONS
+
+ How to Apply These Terms to Your New Programs
+
+ If you develop a new program, and you want it to be of the greatest
+possible use to the public, the best way to achieve this is to make it
+free software which everyone can redistribute and change under these terms.
+
+ To do so, attach the following notices to the program. It is safest
+to attach them to the start of each source file to most effectively
+convey the exclusion of warranty; and each file should have at least
+the "copyright" line and a pointer to where the full notice is found.
+
+ <one line to give the program's name and a brief idea of what it does.>
+ Copyright (C) <year> <name of author>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+
+
+Also add information on how to contact you by electronic and paper mail.
+
+If the program is interactive, make it output a short notice like this
+when it starts in an interactive mode:
+
+ Gnomovision version 69, Copyright (C) year name of author
+ Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
+ This is free software, and you are welcome to redistribute it
+ under certain conditions; type `show c' for details.
+
+The hypothetical commands `show w' and `show c' should show the appropriate
+parts of the General Public License. Of course, the commands you use may
+be called something other than `show w' and `show c'; they could even be
+mouse-clicks or menu items--whatever suits your program.
+
+You should also get your employer (if you work as a programmer) or your
+school, if any, to sign a "copyright disclaimer" for the program, if
+necessary. Here is a sample; alter the names:
+
+ Yoyodyne, Inc., hereby disclaims all copyright interest in the program
+ `Gnomovision' (which makes passes at compilers) written by James Hacker.
+
+ <signature of Ty Coon>, 1 April 1989
+ Ty Coon, President of Vice
+
+This General Public License does not permit incorporating your program into
+proprietary programs. If your program is a subroutine library, you may
+consider it more useful to permit linking proprietary applications with the
+library. If this is what you want to do, use the GNU Library General
+Public License instead of this License.
Added: trunk/geanyvc/INSTALL
===================================================================
--- trunk/geanyvc/INSTALL (rev 0)
+++ trunk/geanyvc/INSTALL 2008-06-20 10:30:01 UTC (rev 78)
@@ -0,0 +1,13 @@
+These installation instructions are written for a GNU/Linux system.
+
+At the time of this writing, building the plugin requires a recent SVN geany (r2411+)
+installed.
+
+ % configure
+ % make
+ % make install
+
+There is no "make uninstall" target, so if you want to remove the plugin,
+just delete the "geanyvc.so" from geany plugins directory (usually: /usr/lib/geany).
+
+
Added: trunk/geanyvc/Makefile.am
===================================================================
--- trunk/geanyvc/Makefile.am (rev 0)
+++ trunk/geanyvc/Makefile.am 2008-06-20 10:30:01 UTC (rev 78)
@@ -0,0 +1,34 @@
+## Makefile.am -- Process this file with automake to produce Makefile.in
+SUBDIRS = po
+
+EXTRA_DIST = \
+ autogen.sh \
+ makefile.win32 \
+ intltool-extract.in \
+ intltool-merge.in \
+ intltool-update.in \
+ indent-all.sh \
+ THANKS \
+ commit.glade
+
+dist_noinst_SCRIPTS = indent-all.sh
+
+noinst_HEADERS = geanyvc.h
+
+lib_LTLIBRARIES = geanyvc.la
+geanyvc_la_SOURCES = geanyvc.c externdiff.c vc_git.c vc_cvs.c vc_svn.c vc_svk.c vc_bzr.c vc_hg.c
+geanyvc_la_LDFLAGS = -module -avoid-version
+geanyvc_la_LIBADD = @GEANY_LIBS@
+
+AM_CPPFLAGS = @GEANY_CFLAGS@ -DGEANY_DISABLE_DEPRECATED
+
+
+.PHONY: ChangeLog mrproper
+
+ChangeLog:
+ git log > ChangeLog
+
+mrproper:
+ git clean -d -x -f
+
+
Added: trunk/geanyvc/README
===================================================================
--- trunk/geanyvc/README (rev 0)
+++ trunk/geanyvc/README 2008-06-20 10:30:01 UTC (rev 78)
@@ -0,0 +1,160 @@
+.. |(version)| replace:: 0.3
+
+=======
+geanyvc
+=======
+
+.. contents::
+
+About
+=====
+
+geanyvc is plugin that provides a uniform way of accessing the different
+version-control systems inside Geany IDE. Only small subset of vc is
+implemented, but, hey, you don't need anything besides diff, log, status,
+revert and commit most time.
+
+Features
+========
+
+geanyvc currently support the following version control systems:
+
+Bazaar, GIT, Mercurial, Subversion, SVK::
+
+ * diff file
+ * diff directory
+ * diff project
+ * blame
+ * log file
+ * log directory
+ * log project
+ * status
+ * revert file
+ * add file
+ * remove file
+ * commit
+ * blame
+
+CVS::
+
+ * diff file
+ * diff directory
+ * diff project
+ * log file
+ * log directory
+ * log project
+ * status
+ * revert file
+
+Requirements
+============
+
+For compiling geanyvc you need Geany sources, you can get them at
+http://geany.uvena.de/, you will need the GTK (>= 2.6.0) libraries
+and header files. You will also need its dependency libraries and header
+files, such as Pango, Glib and ATK. All these files are available at
+http://www.gtk.org. If you like to use spellchecking for your commit
+messages you will also need gtkspell (>=2.0), but this is only optional.
+
+Furthermore you need, of course, a C compiler and the Make tool; The
+GNU versions of these tools are recommended.
+
+Usage
+=====
+
+After compiling and/or installing geanyvc, start Geany and go to menu
+Tools->Plugin Manager and set checkbox at VC plugin.
+
+You can configure the following options:
+
+* Set Change flag for document tabs created with pluging.
+
+If this option is activated, every new by the VC-plugin created document tab
+will be marked as changed. Even thus this option is useful in some cases, it
+could cause a big number of sometimes annoying "Do you want to save"-dialogs.
+
+* Confirm adding new files to a VCS
+
+Shows a confirmation dialog on adding a new (created) file to VCS. If not set
+you will not see dialog "Do you want to add <file>?"
+
+* Enable CVS/GIT/Mercurial/SVN/SVK/Bazaar
+
+geanyvc detect if opened file is in version control by checking directories
+and executing commands from version control systems toolchain. These options
+disable checking for particular version control system. Disabling not
+required ones can speed up things. So it is recommended to activate svk only
+if you want to use it, since it is quiet slowly.
+
+License
+=======
+
+geanyvc is distributed under the terms of the GNU General Public License
+as published by the Free Software Foundation; either version 2 of the
+License, or (at your option) any later version. A copy of this license
+can be found in the file COPYING included with the source code of this
+program.
+
+Ideas, questions, patches and bug reports
+=========================================
+
+If you add something, or fix a bug, please send a patch (in 'diff -u'
+format) to the geany mailing list or to one of the authors listed bellow.
+
+Coding
+======
+
+Use static functions where possible.
+Try to use GLib types and functions - e.g. g_free instead of free and
+try to use only GLib 2.6 and GTK 2.6 functions. At least for the moment,
+we want to keep the minimum requirement for GTK at 2.6.
+
+Style
+=====
+
+The file indent-all.sh contains information about
+the current code style. Run this script before commit.
+
+Download
+========
+
+The current version is |(version)|, download it here http://users.cosmostv.by/yurand/geanyvc/geanyvc-0.3.tar.gz.
+
+There is also git repository http://git.or.cz available. In http://repo.or.cz/w/geanyvc.git you can
+always find an up-to-date version of source code, even between releases.
+
+To clone geanyvc make sure you have the git package installed on your system.
+Then run the following command::
+
+ git clone git://repo.or.cz/geanyvc.git
+
+or::
+
+ git clone http://repo.or.cz/r/geanyvc.git
+
+Gentoo
+------
+
+Gentoo ebuild is available here: http://bugs.gentoo.org/show_bug.cgi?id=218522
+
+Arch linux
+----------
+
+A package for Arch Linux is available here: http://aur.archlinux.org/packages.php?ID=16484
+
+Source Mage
+-----------
+
+To install geanyvc, just run the following command::
+
+ cast geanyvc
+
+Windows
+-------
+
+A windows installer is available here: http://users.cosmostv.by/yurand/geanyvc/geanyvc-0.3_setup.exe
+
+--
+2007-2008 by Yura Siamashka and Frank Lanitz
+yurand2(at)gmail(dot)com
+frank(at)frank(dot)uvena(dot)de
Added: trunk/geanyvc/THANKS
===================================================================
--- trunk/geanyvc/THANKS (rev 0)
+++ trunk/geanyvc/THANKS 2008-06-20 10:30:01 UTC (rev 78)
@@ -0,0 +1,15 @@
+What's this file about?
+-----------------------
+This file lists all external people that have contributed to this project.
+
+Testers and contributors:
+-------------------------
+Nick Treleaven <nick(dot)treleaven(at)btinternet(dot)com> - some patches
+Enrico Troeger <enrico(dot)troeger(at)uvena(dot)de> - Geany IDE author, some patches and testing
+Jeff Pohlmeyer <yetanothergeek(at)gmail(dot)com> - INSTALL instructions stolen from him.
+Karel Kolman <kolmis(at)gmail(dot)com> - Bazaar support.
+David Kalnischkies <kalnischkies(at)gmail(dot)com> - Mercurial support
+
+Projects
+--------
+Sylpheed
Added: trunk/geanyvc/TODO
===================================================================
--- trunk/geanyvc/TODO (rev 0)
+++ trunk/geanyvc/TODO 2008-06-20 10:30:01 UTC (rev 78)
@@ -0,0 +1,11 @@
+* fix mess with local and utf8 encodings.
+* implement in_vc_cvs function.
+* implement cvs commit command.
+* implement cvs blame(?) command.
+* option external diff program.
+* check windows build for problems with stdout/stderr output
+* (add spellchecking to commit dialog)
+* (add function to change branches for VCS that support it)
+* (add auto wrapping long line at commit dialog)
+* (add commit function for a single file)
+* (add git bisec support)
Added: trunk/geanyvc/autogen.sh
===================================================================
--- trunk/geanyvc/autogen.sh (rev 0)
+++ trunk/geanyvc/autogen.sh 2008-06-20 10:30:01 UTC (rev 78)
@@ -0,0 +1,159 @@
+#!/bin/sh
+# Run this to generate all the initial makefiles, etc.
+
+srcdir=`dirname $0`
+test -z "$srcdir" && srcdir=.
+
+DIE=0
+
+if [ -n "$GNOME2_DIR" ]; then
+ ACLOCAL_FLAGS="-I $GNOME2_DIR/share/aclocal $ACLOCAL_FLAGS"
+ LD_LIBRARY_PATH="$GNOME2_DIR/lib:$LD_LIBRARY_PATH"
+ PATH="$GNOME2_DIR/bin:$PATH"
+ export PATH
+ export LD_LIBRARY_PATH
+fi
+
+(test -f $srcdir/configure.in) || {
+ echo -n "**Error**: Directory "\`$srcdir\'" does not look like the"
+ echo " top-level package directory"
+ exit 1
+}
+
+(autoconf --version) < /dev/null > /dev/null 2>&1 || {
+ echo
+ echo "**Error**: You must have \`autoconf' installed."
+ echo "Download the appropriate package for your distribution,"
+ echo "or get the source tarball at ftp://ftp.gnu.org/pub/gnu/"
+ DIE=1
+}
+
+(grep "^AC_PROG_INTLTOOL" $srcdir/configure.in >/dev/null) && {
+ (intltoolize --version) < /dev/null > /dev/null 2>&1 || {
+ echo
+ echo "**Error**: You must have \`intltool' installed."
+ echo "You can get it from:"
+ echo " ftp://ftp.gnome.org/pub/GNOME/"
+ DIE=1
+ }
+}
+
+(grep "^AM_PROG_XML_I18N_TOOLS" $srcdir/configure.in >/dev/null) && {
+ (xml-i18n-toolize --version) < /dev/null > /dev/null 2>&1 || {
+ echo
+ echo "**Error**: You must have \`xml-i18n-toolize' installed."
+ echo "You can get it from:"
+ echo " ftp://ftp.gnome.org/pub/GNOME/"
+ DIE=1
+ }
+}
+
+(grep "^AM_PROG_LIBTOOL" $srcdir/configure.in >/dev/null) && {
+ (libtool --version) < /dev/null > /dev/null 2>&1 || {
+ echo
+ echo "**Error**: You must have \`libtool' installed."
+ echo "You can get it from: ftp://ftp.gnu.org/pub/gnu/"
+ DIE=1
+ }
+}
+
+(grep "^AM_GLIB_GNU_GETTEXT" $srcdir/configure.in >/dev/null) && {
+ (grep "sed.*POTFILES" $srcdir/configure.in) > /dev/null || \
+ (glib-gettextize --version) < /dev/null > /dev/null 2>&1 || {
+ echo
+ echo "**Error**: You must have \`glib' installed."
+ echo "You can get it from: ftp://ftp.gtk.org/pub/gtk"
+ DIE=1
+ }
+}
+
+(automake --version) < /dev/null > /dev/null 2>&1 || {
+ echo
+ echo "**Error**: You must have \`automake' installed."
+ echo "You can get it from: ftp://ftp.gnu.org/pub/gnu/"
+ DIE=1
+ NO_AUTOMAKE=yes
+}
+
+
+# if no automake, don't bother testing for aclocal
+test -n "$NO_AUTOMAKE" || (aclocal --version) < /dev/null > /dev/null 2>&1 || {
+ echo
+ echo "**Error**: Missing \`aclocal'. The version of \`automake'"
+ echo "installed doesn't appear recent enough."
+ echo "You can get automake from ftp://ftp.gnu.org/pub/gnu/"
+ DIE=1
+}
+
+if test "$DIE" -eq 1; then
+ exit 1
+fi
+
+if test -z "$*"; then
+ echo "**Warning**: I am going to run \`configure' with no arguments."
+ echo "If you wish to pass any to it, please specify them on the"
+ echo \`$0\'" command line."
+ echo
+fi
+
+case $CC in
+xlc )
+ am_opt=--include-deps;;
+esac
+
+for coin in `find $srcdir -path $srcdir/CVS -prune -o -name configure.in -print`
+do
+ dr=`dirname $coin`
+ if test -f $dr/NO-AUTO-GEN; then
+ echo skipping $dr -- flagged as no auto-gen
+ else
+ echo processing $dr
+ ( cd $dr
+
+ aclocalinclude="$ACLOCAL_FLAGS"
+
+ if grep "^AM_GLIB_GNU_GETTEXT" configure.in >/dev/null; then
+ echo "Creating $dr/aclocal.m4 ..."
+ test -r $dr/aclocal.m4 || touch $dr/aclocal.m4
+ echo "Running glib-gettextize... Ignore non-fatal messages."
+ echo "no" | glib-gettextize --force --copy
+ echo "Making $dr/aclocal.m4 writable ..."
+ test -r $dr/aclocal.m4 && chmod u+w $dr/aclocal.m4
+ fi
+ if grep "^AC_PROG_INTLTOOL" configure.in >/dev/null; then
+ echo "Running intltoolize..."
+ intltoolize --copy --force --automake
+ fi
+ if grep "^AM_PROG_XML_I18N_TOOLS" configure.in >/dev/null; then
+ echo "Running xml-i18n-toolize..."
+ xml-i18n-toolize --copy --force --automake
+ fi
+ if grep "^AM_PROG_LIBTOOL" configure.in >/dev/null; then
+ if test -z "$NO_LIBTOOLIZE" ; then
+ echo "Running libtoolize..."
+ libtoolize --force --copy
+ fi
+ fi
+ echo "Running aclocal $aclocalinclude ..."
+ aclocal $aclocalinclude
+ if grep "^AM_CONFIG_HEADER" configure.in >/dev/null; then
+ echo "Running autoheader..."
+ autoheader
+ fi
+ echo "Running automake --gnu $am_opt ..."
+ automake --add-missing --gnu $am_opt
+ echo "Running autoconf ..."
+ autoconf
+ )
+ fi
+done
+
+conf_flags="--enable-maintainer-mode"
+
+if test x$NOCONFIGURE = x; then
+ echo Running $srcdir/configure $conf_flags "$@" ...
+ $srcdir/configure $conf_flags "$@" \
+ && echo Now type \`make\' to compile. || exit 1
+else
+ echo Skipping configure process.
+fi
Property changes on: trunk/geanyvc/autogen.sh
___________________________________________________________________
Name: svn:executable
+ *
Added: trunk/geanyvc/commit.glade
===================================================================
--- trunk/geanyvc/commit.glade (rev 0)
+++ trunk/geanyvc/commit.glade 2008-06-20 10:30:01 UTC (rev 78)
@@ -0,0 +1,168 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<!DOCTYPE glade-interface SYSTEM "glade-2.0.dtd">
+<!--Generated with glade3 3.2.2 on Thu Nov 29 23:29:48 2007 by yura@localhost-->
+<glade-interface>
+ <widget class="GtkDialog" id="commitDialog">
+ <property name="events">GDK_POINTER_MOTION_MASK | GDK_POINTER_MOTION_HINT_MASK | GDK_BUTTON_PRESS_MASK | GDK_BUTTON_RELEASE_MASK</property>
+ <property name="border_width">5</property>
+ <property name="title" translatable="yes">Commit</property>
+ <property name="modal">True</property>
+ <property name="window_position">GTK_WIN_POS_CENTER_ON_PARENT</property>
+ <property name="destroy_with_parent">True</property>
+ <property name="type_hint">GDK_WINDOW_TYPE_HINT_DIALOG</property>
+ <property name="has_separator">False</property>
+ <child internal-child="vbox">
+ <widget class="GtkVBox" id="dialog-vbox1">
+ <property name="visible">True</property>
+ <property name="events">GDK_POINTER_MOTION_MASK | GDK_POINTER_MOTION_HINT_MASK | GDK_BUTTON_PRESS_MASK | GDK_BUTTON_RELEASE_MASK</property>
+ <property name="spacing">2</property>
+ <child>
+ <widget class="GtkVPaned" id="vpaned1">
+ <property name="visible">True</property>
+ <property name="can_focus">True</property>
+ <property name="events">GDK_POINTER_MOTION_MASK | GDK_POINTER_MOTION_HINT_MASK | GDK_BUTTON_PRESS_MASK | GDK_BUTTON_RELEASE_MASK</property>
+ <child>
+ <widget class="GtkScrolledWindow" id="scrolledwindow1">
+ <property name="visible">True</property>
+ <property name="can_focus">True</property>
+ <property name="events">GDK_POINTER_MOTION_MASK | GDK_POINTER_MOTION_HINT_MASK | GDK_BUTTON_PRESS_MASK | GDK_BUTTON_RELEASE_MASK</property>
+ <property name="hscrollbar_policy">GTK_POLICY_AUTOMATIC</property>
+ <property name="vscrollbar_policy">GTK_POLICY_AUTOMATIC</property>
+ <child>
+ <widget class="GtkTreeView" id="treeSelect">
+ <property name="visible">True</property>
+ <property name="can_focus">True</property>
+ <property name="events">GDK_POINTER_MOTION_MASK | GDK_POINTER_MOTION_HINT_MASK | GDK_BUTTON_PRESS_MASK | GDK_BUTTON_RELEASE_MASK</property>
+ <property name="headers_clickable">True</property>
+ </widget>
+ </child>
+ </widget>
+ <packing>
+ <property name="resize">False</property>
+ <property name="shrink">True</property>
+ </packing>
+ </child>
+ <child>
+ <widget class="GtkVPaned" id="vpaned2">
+ <property name="visible">True</property>
+ <property name="can_focus">True</property>
+ <property name="events">GDK_POINTER_MOTION_MASK | GDK_POINTER_MOTION_HINT_MASK | GDK_BUTTON_PRESS_MASK | GDK_BUTTON_RELEASE_MASK</property>
+ <child>
+ <widget class="GtkScrolledWindow" id="scrolledwindow2">
+ <property name="visible">True</property>
+ <property name="can_focus">True</property>
+ <property name="events">GDK_POINTER_MOTION_MASK | GDK_POINTER_MOTION_HINT_MASK | GDK_BUTTON_PRESS_MASK | GDK_BUTTON_RELEASE_MASK</property>
+ <property name="hscrollbar_policy">GTK_POLICY_AUTOMATIC</property>
+ <property name="vscrollbar_policy">GTK_POLICY_AUTOMATIC</property>
+ <property name="shadow_type">GTK_SHADOW_IN</property>
+ <child>
+ <widget class="GtkTextView" id="textDiff">
+ <property name="visible">True</property>
+ <property name="can_focus">True</property>
+ <property name="events">GDK_POINTER_MOTION_MASK | GDK_POINTER_MOTION_HINT_MASK | GDK_BUTTON_PRESS_MASK | GDK_BUTTON_RELEASE_MASK</property>
+ <property name="editable">False</property>
+ </widget>
+ </child>
+ </widget>
+ <packing>
+ <property name="resize">True</property>
+ <property name="shrink">True</property>
+ </packing>
+ </child>
+ <child>
+ <widget class="GtkFrame" id="frame1">
+ <property name="visible">True</property>
+ <property name="events">GDK_POINTER_MOTION_MASK | GDK_POINTER_MOTION_HINT_MASK | GDK_BUTTON_PRESS_MASK | GDK_BUTTON_RELEASE_MASK</property>
+ <property name="label_xalign">0</property>
+ <property name="shadow_type">GTK_SHADOW_NONE</property>
+ <child>
+ <widget class="GtkAlignment" id="alignment1">
+ <property name="visible">True</property>
+ <property name="events">GDK_POINTER_MOTION_MASK | GDK_POINTER_MOTION_HINT_MASK | GDK_BUTTON_PRESS_MASK | GDK_BUTTON_RELEASE_MASK</property>
+ <property name="left_padding">12</property>
+ <child>
+ <widget class="GtkScrolledWindow" id="scrolledwindow3">
+ <property name="visible">True</property>
+ <property name="can_focus">True</property>
+ <property name="events">GDK_POINTER_MOTION_MASK | GDK_POINTER_MOTION_HINT_MASK | GDK_BUTTON_PRESS_MASK | GDK_BUTTON_RELEASE_MASK</property>
+ <property name="hscrollbar_policy">GTK_POLICY_AUTOMATIC</property>
+ <property name="vscrollbar_policy">GTK_POLICY_AUTOMATIC</property>
+ <property name="shadow_type">GTK_SHADOW_IN</property>
+ <child>
+ <widget class="GtkTextView" id="textCommitMessage">
+ <property name="visible">True</property>
+ <property name="can_focus">True</property>
+ <property name="events">GDK_POINTER_MOTION_MASK | GDK_POINTER_MOTION_HINT_MASK | GDK_BUTTON_PRESS_MASK | GDK_BUTTON_RELEASE_MASK</property>
+ </widget>
+ </child>
+ </widget>
+ </child>
+ </widget>
+ </child>
+ <child>
+ <widget class="GtkLabel" id="label1">
+ <property name="visible">True</property>
+ <property name="events">GDK_POINTER_MOTION_MASK | GDK_POINTER_MOTION_HINT_MASK | GDK_BUTTON_PRESS_MASK | GDK_BUTTON_RELEASE_MASK</property>
+ <property name="label" translatable="yes"><b>Commit message:</b></property>
+ <property name="use_markup">True</property>
+ </widget>
+ <packing>
+ <property name="type">label_item</property>
+ </packing>
+ </child>
+ </widget>
+ <packing>
+ <property name="resize">True</property>
+ <property name="shrink">True</property>
+ </packing>
+ </child>
+ </widget>
+ <packing>
+ <property name="resize">True</property>
+ <property name="shrink">True</property>
+ </packing>
+ </child>
+ </widget>
+ <packing>
+ <property name="position">1</property>
+ </packing>
+ </child>
+ <child internal-child="action_area">
+ <widget class="GtkHButtonBox" id="dialog-action_area1">
+ <property name="visible">True</property>
+ <property name="events">GDK_POINTER_MOTION_MASK | GDK_POINTER_MOTION_HINT_MASK | GDK_BUTTON_PRESS_MASK | GDK_BUTTON_RELEASE_MASK</property>
+ <property name="layout_style">GTK_BUTTONBOX_END</property>
+ <child>
+ <widget class="GtkButton" id="btnCancel">
+ <property name="visible">True</property>
+ <property name="can_focus">True</property>
+ <property name="receives_default">True</property>
+ <property name="events">GDK_POINTER_MOTION_MASK | GDK_POINTER_MOTION_HINT_MASK | GDK_BUTTON_PRESS_MASK | GDK_BUTTON_RELEASE_MASK</property>
+ <property name="label" translatable="yes">gtk-cancel</property>
+ <property name="use_stock">True</property>
+ <property name="response_id">-6</property>
+ </widget>
+ </child>
+ <child>
+ <widget class="GtkButton" id="btnCommit">
+ <property name="visible">True</property>
+ <property name="can_focus">True</property>
+ <property name="receives_default">True</property>
+ <property name="events">GDK_POINTER_MOTION_MASK | GDK_POINTER_MOTION_HINT_MASK | GDK_BUTTON_PRESS_MASK | GDK_BUTTON_RELEASE_MASK</property>
+ <property name="label" translatable="yes">_Commit</property>
+ <property name="response_id">-10</property>
+ </widget>
+ <packing>
+ <property name="position">1</property>
+ </packing>
+ </child>
+ </widget>
+ <packing>
+ <property name="expand">False</property>
+ <property name="pack_type">GTK_PACK_END</property>
+ </packing>
+ </child>
+ </widget>
+ </child>
+ </widget>
+</glade-interface>
Added: trunk/geanyvc/configure.in
===================================================================
--- trunk/geanyvc/configure.in (rev 0)
+++ trunk/geanyvc/configure.in 2008-06-20 10:30:01 UTC (rev 78)
@@ -0,0 +1,93 @@
+dnl Process this file with autoconf to produce a configure script.
+
+AC_INIT([geanyvc], [0.4], [yurand2(a)gmail.com])
+AM_INIT_AUTOMAKE([1.9 foreign])
+
+AM_CONFIG_HEADER(config.h)
+
+AC_PROG_CC
+
+AC_DISABLE_STATIC
+AM_PROG_LIBTOOL
+LIBTOOL="$LIBTOOL --silent"
+
+AC_PROG_INSTALL
+AC_PROG_INTLTOOL
+
+
+# checking for Geany
+PKG_CHECK_MODULES(GEANY, [geany >= 0.15])
+AC_SUBST(GTK_CFLAGS)
+AC_SUBST(GTK_LIBS)
+
+GEANY_VERSION=`$PKG_CONFIG --modversion geany`
+GTK_VERSION=`$PKG_CONFIG --modversion gtk+-2.0`
+
+
+dnl Check for GtkSpell support
+AC_MSG_CHECKING([whether to use GtkSpell])
+AC_ARG_ENABLE(gtkspell,
+ [ --disable-gtkspell Do not use GtkSpell in editor],
+ [ac_cv_enable_gtkspell=$enableval], [ac_cv_enable_gtkspell=yes])
+if test "$ac_cv_enable_gtkspell" = yes; then
+ AC_MSG_RESULT(yes)
+ AC_MSG_CHECKING([whether GtkSpell is available])
+ if $PKG_CONFIG gtkspell-2.0 ; then
+ AC_MSG_RESULT(yes)
+ CFLAGS="$CFLAGS `$PKG_CONFIG --cflags gtkspell-2.0`"
+ LIBS="$LIBS `$PKG_CONFIG --libs gtkspell-2.0`"
+ AC_DEFINE(USE_GTKSPELL, 1, Use GtkSpell in editor)
+ else
+ AC_MSG_RESULT(no)
+ ac_cv_enable_gtkspell=no
+ fi
+else
+ AC_MSG_RESULT(no)
+fi
+
+# i18n
+GETTEXT_PACKAGE=geanyvc
+AC_SUBST(GETTEXT_PACKAGE)
+AC_DEFINE_UNQUOTED(GETTEXT_PACKAGE,"$GETTEXT_PACKAGE", [Gettext package.])
+
+ALL_LINGUAS="`sed -e '/^#/d' $srcdir/po/LINGUAS`" # take all languages found in file po/LINGUAS
+
+AM_GLIB_GNU_GETTEXT
+# workaround for intltool bug (http://bugzilla.gnome.org/show_bug.cgi?id=490845)
+if test "x$MSGFMT" = "xno"; then
+ AC_MSG_ERROR([msgfmt not found. Please install the gettext package.])
+fi
+
+# intltool hack to define install_sh on Debian/Ubuntu systems
+if test "x$install_sh" = "x"; then
+ install_sh="`pwd`/install-sh"
+ AC_SUBST(install_sh)
+fi
+
+# get the plugin installed at the correct location for Geany
+# TODO find a way to NOT override --libdir command line option if given
+libdir="`$PKG_CONFIG --variable=libdir geany`/geany"
+
+dnl unittests
+PKG_CHECK_MODULES([CHECK], [check >= 0.9.4], [
+AC_SUBST(CHECK_CFLAGS)
+AC_SUBST(CHECK_LIBS)
+AM_CONDITIONAL(UNITTESTS, true)
+], [
+AM_CONDITIONAL(UNITTESTS, false)
+])
+
+
+AC_OUTPUT([
+Makefile
+po/Makefile.in
+])
+
+echo "----------------------------------------"
+echo "Install geanyvc in : ${libdir}"
+echo "Using Geany version : ${GEANY_VERSION}"
+echo "Using GTK version : ${GTK_VERSION}"
+echo "Building with GtkSpell support : ${ac_cv_enable_gtkspell}"
+echo ""
+echo "Configuration is done OK."
+echo ""
Added: trunk/geanyvc/depcomp
===================================================================
--- trunk/geanyvc/depcomp (rev 0)
+++ trunk/geanyvc/depcomp 2008-06-20 10:30:01 UTC (rev 78)
@@ -0,0 +1,584 @@
+#! /bin/sh
+# depcomp - compile a program generating dependencies as side-effects
+
+scriptversion=2006-10-15.18
+
+# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2006 Free Software
+# Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+# 02110-1301, USA.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# Originally written by Alexandre Oliva <oliva(a)dcc.unicamp.br>.
+
+case $1 in
+ '')
+ echo "$0: No command. Try \`$0 --help' for more information." 1>&2
+ exit 1;
+ ;;
+ -h | --h*)
+ cat <<\EOF
+Usage: depcomp [--help] [--version] PROGRAM [ARGS]
+
+Run PROGRAMS ARGS to compile a file, generating dependencies
+as side-effects.
+
+Environment variables:
+ depmode Dependency tracking mode.
+ source Source file read by `PROGRAMS ARGS'.
+ object Object file output by `PROGRAMS ARGS'.
+ DEPDIR directory where to store dependencies.
+ depfile Dependency file to output.
+ tmpdepfile Temporary file to use when outputing dependencies.
+ libtool Whether libtool is used (yes/no).
+
+Report bugs to <bug-automake(a)gnu.org>.
+EOF
+ exit $?
+ ;;
+ -v | --v*)
+ echo "depcomp $scriptversion"
+ exit $?
+ ;;
+esac
+
+if test -z "$depmode" || test -z "$source" || test -z "$object"; then
+ echo "depcomp: Variables source, object and depmode must be set" 1>&2
+ exit 1
+fi
+
+# Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po.
+depfile=${depfile-`echo "$object" |
+ sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`}
+tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
+
+rm -f "$tmpdepfile"
+
+# Some modes work just like other modes, but use different flags. We
+# parameterize here, but still list the modes in the big case below,
+# to make depend.m4 easier to write. Note that we *cannot* use a case
+# here, because this file can only contain one case statement.
+if test "$depmode" = hp; then
+ # HP compiler uses -M and no extra arg.
+ gccflag=-M
+ depmode=gcc
+fi
+
+if test "$depmode" = dashXmstdout; then
+ # This is just like dashmstdout with a different argument.
+ dashmflag=-xM
+ depmode=dashmstdout
+fi
+
+case "$depmode" in
+gcc3)
+## gcc 3 implements dependency tracking that does exactly what
+## we want. Yay! Note: for some reason libtool 1.4 doesn't like
+## it if -MD -MP comes after the -MF stuff. Hmm.
+## Unfortunately, FreeBSD c89 acceptance of flags depends upon
+## the command line argument order; so add the flags where they
+## appear in depend2.am. Note that the slowdown incurred here
+## affects only configure: in makefiles, %FASTDEP% shortcuts this.
+ for arg
+ do
+ case $arg in
+ -c) set fnord "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" "$arg" ;;
+ *) set fnord "$@" "$arg" ;;
+ esac
+ shift # fnord
+ shift # $arg
+ done
+ "$@"
+ stat=$?
+ if test $stat -eq 0; then :
+ else
+ rm -f "$tmpdepfile"
+ exit $stat
+ fi
+ mv "$tmpdepfile" "$depfile"
+ ;;
+
+gcc)
+## There are various ways to get dependency output from gcc. Here's
+## why we pick this rather obscure method:
+## - Don't want to use -MD because we'd like the dependencies to end
+## up in a subdir. Having to rename by hand is ugly.
+## (We might end up doing this anyway to support other compilers.)
+## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like
+## -MM, not -M (despite what the docs say).
+## - Using -M directly means running the compiler twice (even worse
+## than renaming).
+ if test -z "$gccflag"; then
+ gccflag=-MD,
+ fi
+ "$@" -Wp,"$gccflag$tmpdepfile"
+ stat=$?
+ if test $stat -eq 0; then :
+ else
+ rm -f "$tmpdepfile"
+ exit $stat
+ fi
+ rm -f "$depfile"
+ echo "$object : \\" > "$depfile"
+ alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz
+## The second -e expression handles DOS-style file names with drive letters.
+ sed -e 's/^[^:]*: / /' \
+ -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile"
+## This next piece of magic avoids the `deleted header file' problem.
+## The problem is that when a header file which appears in a .P file
+## is deleted, the dependency causes make to die (because there is
+## typically no way to rebuild the header). We avoid this by adding
+## dummy dependencies for each header file. Too bad gcc doesn't do
+## this for us directly.
+ tr ' ' '
+' < "$tmpdepfile" |
+## Some versions of gcc put a space before the `:'. On the theory
+## that the space means something, we add a space to the output as
+## well.
+## Some versions of the HPUX 10.20 sed can't process this invocation
+## correctly. Breaking it into two sed invocations is a workaround.
+ sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+ rm -f "$tmpdepfile"
+ ;;
+
+hp)
+ # This case exists only to let depend.m4 do its work. It works by
+ # looking at the text of this script. This case will never be run,
+ # since it is checked for above.
+ exit 1
+ ;;
+
+sgi)
+ if test "$libtool" = yes; then
+ "$@" "-Wp,-MDupdate,$tmpdepfile"
+ else
+ "$@" -MDupdate "$tmpdepfile"
+ fi
+ stat=$?
+ if test $stat -eq 0; then :
+ else
+ rm -f "$tmpdepfile"
+ exit $stat
+ fi
+ rm -f "$depfile"
+
+ if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files
+ echo "$object : \\" > "$depfile"
+
+ # Clip off the initial element (the dependent). Don't try to be
+ # clever and replace this with sed code, as IRIX sed won't handle
+ # lines with more than a fixed number of characters (4096 in
+ # IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines;
+ # the IRIX cc adds comments like `#:fec' to the end of the
+ # dependency line.
+ tr ' ' '
+' < "$tmpdepfile" \
+ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \
+ tr '
+' ' ' >> $depfile
+ echo >> $depfile
+
+ # The second pass generates a dummy entry for each header file.
+ tr ' ' '
+' < "$tmpdepfile" \
+ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
+ >> $depfile
+ else
+ # The sourcefile does not contain any dependencies, so just
+ # store a dummy comment line, to avoid errors with the Makefile
+ # "include basename.Plo" scheme.
+ echo "#dummy" > "$depfile"
+ fi
+ rm -f "$tmpdepfile"
+ ;;
+
+aix)
+ # The C for AIX Compiler uses -M and outputs the dependencies
+ # in a .u file. In older versions, this file always lives in the
+ # current directory. Also, the AIX compiler puts `$object:' at the
+ # start of each line; $object doesn't have directory information.
+ # Version 6 uses the directory in both cases.
+ stripped=`echo "$object" | sed 's/\(.*\)\..*$/\1/'`
+ tmpdepfile="$stripped.u"
+ if test "$libtool" = yes; then
+ "$@" -Wc,-M
+ else
+ "$@" -M
+ fi
+ stat=$?
+
+ if test -f "$tmpdepfile"; then :
+ else
+ stripped=`echo "$stripped" | sed 's,^.*/,,'`
+ tmpdepfile="$stripped.u"
+ fi
+
+ if test $stat -eq 0; then :
+ else
+ rm -f "$tmpdepfile"
+ exit $stat
+ fi
+
+ if test -f "$tmpdepfile"; then
+ outname="$stripped.o"
+ # Each line is of the form `foo.o: dependent.h'.
+ # Do two passes, one to just change these to
+ # `$object: dependent.h' and one to simply `dependent.h:'.
+ sed -e "s,^$outname:,$object :," < "$tmpdepfile" > "$depfile"
+ sed -e "s,^$outname: \(.*\)$,\1:," < "$tmpdepfile" >> "$depfile"
+ else
+ # The sourcefile does not contain any dependencies, so just
+ # store a dummy comment line, to avoid errors with the Makefile
+ # "include basename.Plo" scheme.
+ echo "#dummy" > "$depfile"
+ fi
+ rm -f "$tmpdepfile"
+ ;;
+
+icc)
+ # Intel's C compiler understands `-MD -MF file'. However on
+ # icc -MD -MF foo.d -c -o sub/foo.o sub/foo.c
+ # ICC 7.0 will fill foo.d with something like
+ # foo.o: sub/foo.c
+ # foo.o: sub/foo.h
+ # which is wrong. We want:
+ # sub/foo.o: sub/foo.c
+ # sub/foo.o: sub/foo.h
+ # sub/foo.c:
+ # sub/foo.h:
+ # ICC 7.1 will output
+ # foo.o: sub/foo.c sub/foo.h
+ # and will wrap long lines using \ :
+ # foo.o: sub/foo.c ... \
+ # sub/foo.h ... \
+ # ...
+
+ "$@" -MD -MF "$tmpdepfile"
+ stat=$?
+ if test $stat -eq 0; then :
+ else
+ rm -f "$tmpdepfile"
+ exit $stat
+ fi
+ rm -f "$depfile"
+ # Each line is of the form `foo.o: dependent.h',
+ # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'.
+ # Do two passes, one to just change these to
+ # `$object: dependent.h' and one to simply `dependent.h:'.
+ sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile"
+ # Some versions of the HPUX 10.20 sed can't process this invocation
+ # correctly. Breaking it into two sed invocations is a workaround.
+ sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" |
+ sed -e 's/$/ :/' >> "$depfile"
+ rm -f "$tmpdepfile"
+ ;;
+
+hp2)
+ # The "hp" stanza above does not work with aCC (C++) and HP's ia64
+ # compilers, which have integrated preprocessors. The correct option
+ # to use with these is +Maked; it writes dependencies to a file named
+ # 'foo.d', which lands next to the object file, wherever that
+ # happens to be.
+ # Much of this is similar to the tru64 case; see comments there.
+ dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
+ test "x$dir" = "x$object" && dir=
+ base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
+ if test "$libtool" = yes; then
+ tmpdepfile1=$dir$base.d
+ tmpdepfile2=$dir.libs/$base.d
+ "$@" -Wc,+Maked
+ else
+ tmpdepfile1=$dir$base.d
+ tmpdepfile2=$dir$base.d
+ "$@" +Maked
+ fi
+ stat=$?
+ if test $stat -eq 0; then :
+ else
+ rm -f "$tmpdepfile1" "$tmpdepfile2"
+ exit $stat
+ fi
+
+ for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2"
+ do
+ test -f "$tmpdepfile" && break
+ done
+ if test -f "$tmpdepfile"; then
+ sed -e "s,^.*\.[a-z]*:,$object:," "$tmpdepfile" > "$depfile"
+ # Add `dependent.h:' lines.
+ sed -ne '2,${; s/^ *//; s/ \\*$//; s/$/:/; p;}' "$tmpdepfile" >> "$depfile"
+ else
+ echo "#dummy" > "$depfile"
+ fi
+ rm -f "$tmpdepfile" "$tmpdepfile2"
+ ;;
+
+tru64)
+ # The Tru64 compiler uses -MD to generate dependencies as a side
+ # effect. `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'.
+ # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
+ # dependencies in `foo.d' instead, so we check for that too.
+ # Subdirectories are respected.
+ dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
+ test "x$dir" = "x$object" && dir=
+ base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
+
+ if test "$libtool" = yes; then
+ # With Tru64 cc, shared objects can also be used to make a
+ # static library. This mechanism is used in libtool 1.4 series to
+ # handle both shared and static libraries in a single compilation.
+ # With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d.
+ #
+ # With libtool 1.5 this exception was removed, and libtool now
+ # generates 2 separate objects for the 2 libraries. These two
+ # compilations output dependencies in $dir.libs/$base.o.d and
+ # in $dir$base.o.d. We have to check for both files, because
+ # one of the two compilations can be disabled. We should prefer
+ # $dir$base.o.d over $dir.libs/$base.o.d because the latter is
+ # automatically cleaned when .libs/ is deleted, while ignoring
+ # the former would cause a distcleancheck panic.
+ tmpdepfile1=$dir.libs/$base.lo.d # libtool 1.4
+ tmpdepfile2=$dir$base.o.d # libtool 1.5
+ tmpdepfile3=$dir.libs/$base.o.d # libtool 1.5
+ tmpdepfile4=$dir.libs/$base.d # Compaq CCC V6.2-504
+ "$@" -Wc,-MD
+ else
+ tmpdepfile1=$dir$base.o.d
+ tmpdepfile2=$dir$base.d
+ tmpdepfile3=$dir$base.d
+ tmpdepfile4=$dir$base.d
+ "$@" -MD
+ fi
+
+ stat=$?
+ if test $stat -eq 0; then :
+ else
+ rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
+ exit $stat
+ fi
+
+ for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
+ do
+ test -f "$tmpdepfile" && break
+ done
+ if test -f "$tmpdepfile"; then
+ sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
+ # That's a tab and a space in the [].
+ sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
+ else
+ echo "#dummy" > "$depfile"
+ fi
+ rm -f "$tmpdepfile"
+ ;;
+
+#nosideeffect)
+ # This comment above is used by automake to tell side-effect
+ # dependency tracking mechanisms from slower ones.
+
+dashmstdout)
+ # Important note: in order to support this mode, a compiler *must*
+ # always write the preprocessed file to stdout, regardless of -o.
+ "$@" || exit $?
+
+ # Remove the call to Libtool.
+ if test "$libtool" = yes; then
+ while test $1 != '--mode=compile'; do
+ shift
+ done
+ shift
+ fi
+
+ # Remove `-o $object'.
+ IFS=" "
+ for arg
+ do
+ case $arg in
+ -o)
+ shift
+ ;;
+ $object)
+ shift
+ ;;
+ *)
+ set fnord "$@" "$arg"
+ shift # fnord
+ shift # $arg
+ ;;
+ esac
+ done
+
+ test -z "$dashmflag" && dashmflag=-M
+ # Require at least two characters before searching for `:'
+ # in the target name. This is to cope with DOS-style filenames:
+ # a dependency such as `c:/foo/bar' could be seen as target `c' otherwise.
+ "$@" $dashmflag |
+ sed 's:^[ ]*[^: ][^:][^:]*\:[ ]*:'"$object"'\: :' > "$tmpdepfile"
+ rm -f "$depfile"
+ cat < "$tmpdepfile" > "$depfile"
+ tr ' ' '
+' < "$tmpdepfile" | \
+## Some versions of the HPUX 10.20 sed can't process this invocation
+## correctly. Breaking it into two sed invocations is a workaround.
+ sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+ rm -f "$tmpdepfile"
+ ;;
+
+dashXmstdout)
+ # This case only exists to satisfy depend.m4. It is never actually
+ # run, as this mode is specially recognized in the preamble.
+ exit 1
+ ;;
+
+makedepend)
+ "$@" || exit $?
+ # Remove any Libtool call
+ if test "$libtool" = yes; then
+ while test $1 != '--mode=compile'; do
+ shift
+ done
+ shift
+ fi
+ # X makedepend
+ shift
+ cleared=no
+ for arg in "$@"; do
+ case $cleared in
+ no)
+ set ""; shift
+ cleared=yes ;;
+ esac
+ case "$arg" in
+ -D*|-I*)
+ set fnord "$@" "$arg"; shift ;;
+ # Strip any option that makedepend may not understand. Remove
+ # the object too, otherwise makedepend will parse it as a source file.
+ -*|$object)
+ ;;
+ *)
+ set fnord "$@" "$arg"; shift ;;
+ esac
+ done
+ obj_suffix="`echo $object | sed 's/^.*\././'`"
+ touch "$tmpdepfile"
+ ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@"
+ rm -f "$depfile"
+ cat < "$tmpdepfile" > "$depfile"
+ sed '1,2d' "$tmpdepfile" | tr ' ' '
+' | \
+## Some versions of the HPUX 10.20 sed can't process this invocation
+## correctly. Breaking it into two sed invocations is a workaround.
+ sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+ rm -f "$tmpdepfile" "$tmpdepfile".bak
+ ;;
+
+cpp)
+ # Important note: in order to support this mode, a compiler *must*
+ # always write the preprocessed file to stdout.
+ "$@" || exit $?
+
+ # Remove the call to Libtool.
+ if test "$libtool" = yes; then
+ while test $1 != '--mode=compile'; do
+ shift
+ done
+ shift
+ fi
+
+ # Remove `-o $object'.
+ IFS=" "
+ for arg
+ do
+ case $arg in
+ -o)
+ shift
+ ;;
+ $object)
+ shift
+ ;;
+ *)
+ set fnord "$@" "$arg"
+ shift # fnord
+ shift # $arg
+ ;;
+ esac
+ done
+
+ "$@" -E |
+ sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
+ -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' |
+ sed '$ s: \\$::' > "$tmpdepfile"
+ rm -f "$depfile"
+ echo "$object : \\" > "$depfile"
+ cat < "$tmpdepfile" >> "$depfile"
+ sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile"
+ rm -f "$tmpdepfile"
+ ;;
+
+msvisualcpp)
+ # Important note: in order to support this mode, a compiler *must*
+ # always write the preprocessed file to stdout, regardless of -o,
+ # because we must use -o when running libtool.
+ "$@" || exit $?
+ IFS=" "
+ for arg
+ do
+ case "$arg" in
+ "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI")
+ set fnord "$@"
+ shift
+ shift
+ ;;
+ *)
+ set fnord "$@" "$arg"
+ shift
+ shift
+ ;;
+ esac
+ done
+ "$@" -E |
+ sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::echo "`cygpath -u \\"\1\\"`":p' | sort | uniq > "$tmpdepfile"
+ rm -f "$depfile"
+ echo "$object : \\" > "$depfile"
+ . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s:: \1 \\:p' >> "$depfile"
+ echo " " >> "$depfile"
+ . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::\1\::p' >> "$depfile"
+ rm -f "$tmpdepfile"
+ ;;
+
+none)
+ exec "$@"
+ ;;
+
+*)
+ echo "Unknown depmode $depmode" 1>&2
+ exit 1
+ ;;
+esac
+
+exit 0
+
+# Local Variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-end: "$"
+# End:
Property changes on: trunk/geanyvc/depcomp
___________________________________________________________________
Name: svn:executable
+ *
Added: trunk/geanyvc/externdiff.c
===================================================================
--- trunk/geanyvc/externdiff.c (rev 0)
+++ trunk/geanyvc/externdiff.c 2008-06-20 10:30:01 UTC (rev 78)
@@ -0,0 +1,87 @@
+/*
+ * externdiff.h - Plugin to geany light IDE to work with vc
+ *
+ * Copyright 2008 Yura Siamashka <yurand2(a)gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+ */
+
+#include <string.h>
+
+#include "geany.h"
+#include "support.h"
+#include "plugindata.h"
+#include "document.h"
+#include "filetypes.h"
+#include "utils.h"
+#include "ui_utils.h"
+#include "project.h"
+#include "prefs.h"
+#include "pluginmacros.h"
+
+
+#include "geanyvc.h"
+
+extern GeanyFunctions *geany_functions;
+
+enum
+{
+ EXTERNAL_DIFF_MELD,
+ EXTERNAL_DIFF_KOMPARE,
+ EXTERNAL_DIFF_KDIFF3,
+ EXTERNAL_DIFF_DIFFUSE,
+ EXTERNAL_DIFF_TKDIFF,
+ EXTERNAL_DIFF_COUNT
+};
+
+static gchar *viewers[EXTERNAL_DIFF_COUNT] = { "meld", "kompare", "kdiff3", "diffuse", "tkdiff" };
+
+static gchar *extern_diff_viewer = NULL;
+const gchar *
+get_external_diff_viewer()
+{
+ gint i;
+
+ if (extern_diff_viewer)
+ return extern_diff_viewer;
+
+ for (i = 0; i < EXTERNAL_DIFF_COUNT; i++)
+ {
+ if (g_find_program_in_path(viewers[i]))
+ {
+ extern_diff_viewer = viewers[i];
+ return extern_diff_viewer;
+ }
+ }
+ return NULL;
+}
+
+void
+vc_external_diff(const gchar * src, const gchar * dest)
+{
+ gchar *argv[4] = { NULL, NULL, NULL, NULL };
+
+ const gchar *diff = get_external_diff_viewer();
+ if (!diff)
+ return;
+
+ argv[0] = (gchar *) diff;
+ argv[1] = (gchar *) src;
+ argv[2] = (gchar *) dest;
+
+ p_utils->spawn_sync(NULL, argv, NULL,
+ G_SPAWN_SEARCH_PATH | G_SPAWN_STDOUT_TO_DEV_NULL |
+ G_SPAWN_STDERR_TO_DEV_NULL, NULL, NULL, NULL, NULL, NULL, NULL);
+}
Added: trunk/geanyvc/geanyvc.c
===================================================================
--- trunk/geanyvc/geanyvc.c (rev 0)
+++ trunk/geanyvc/geanyvc.c 2008-06-20 10:30:01 UTC (rev 78)
@@ -0,0 +1,1925 @@
+/*
+ * geanyvc.c - Plugin to geany light IDE to work with vc
+ *
+ * Copyright 2007, 2008 Frank Lanitz <frank(at)frank(dot)uvena(dot)de>
+ * Copyright 2007 Enrico Trƶger <enrico.troeger(a)uvena.de>
+ * Copyright 2007 Nick Treleaven <nick.treleaven(a)btinternet.com>
+ * Copyright 2007, 2008 Yura Siamashka <yurand2(a)gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+ */
+
+/* VC plugin */
+/* This plugin allow to works with cvs/svn/git inside geany light IDE. */
+
+#include <string.h>
+#include <glib.h>
+#include <glib/gstdio.h>
+
+#include "geany.h"
+#include "support.h"
+#include "plugindata.h"
+#include "document.h"
+#include "filetypes.h"
+#include "utils.h"
+#include "ui_utils.h"
+#include "project.h"
+#include "prefs.h"
+#include "pluginmacros.h"
+
+#include "highlighting.h"
+#include "SciLexer.h"
+
+#include "geanyvc.h"
+
+#include "config.h"
+
+#ifdef USE_GTKSPELL
+#include <gtkspell/gtkspell.h>
+#endif
+
+PluginFields *plugin_fields;
+GeanyData *geany_data;
+GeanyFunctions *geany_functions;
+
+
+PLUGIN_VERSION_CHECK(71);
+PLUGIN_SET_INFO(_("VC"), _("Interface to different Version Control systems."), VERSION,
+ _("Yura Siamashka <yurand2(a)gmail.com>,\nFrank Lanitz <frank(a)frank.uvena.de>"));
+
+/* Some global variables */
+static gboolean set_changed_flag;
+static gboolean set_add_confirmation;
+static gboolean set_maximize_commit_dialog;
+static gboolean set_external_diff;
+
+static gchar *config_file;
+
+static gboolean enable_cvs;
+static gboolean enable_git;
+static gboolean enable_svn;
+static gboolean enable_svk;
+static gboolean enable_bzr;
+static gboolean enable_hg;
+
+#ifdef USE_GTKSPELL
+static gchar *lang;
+#endif
+
+static GSList *VC = NULL;
+
+/* The addresses of these strings act as enums, their contents are not used. */
+const gchar DIRNAME[] = "*DIRNAME*";
+const gchar FILENAME[] = "*FILENAME*";
+const gchar BASE_FILENAME[] = "*BASE_FILENAME*";
+const gchar FILE_LIST[] = "*FILE_LIST*";
+const gchar MESSAGE[] = "*MESSAGE*";
+
+/* this string is used when action require to run several commands */
+const gchar CMD_SEPARATOR[] = "*CMD-SEPARATOR*";
+const gchar CMD_FUNCTION[] = "*CUSTOM_FUNCTION*";
+
+/* commit status */
+const gchar FILE_STATUS_MODIFIED[] = "Modified";
+const gchar FILE_STATUS_ADDED[] = "Added";
+const gchar FILE_STATUS_DELETED[] = "Deleted";
+const gchar FILE_STATUS_UNKNOWN[] = "Unknown";
+
+void *NO_ENV[] = { NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL };
+
+static void registrate();
+
+GSList *
+get_commit_files_null(G_GNUC_UNUSED const gchar * dir)
+{
+ return NULL;
+}
+
+static void
+free_text_list(GSList * lst)
+{
+ GSList *tmp;
+ if (!lst)
+ return;
+ for (tmp = lst; tmp != NULL; tmp = g_slist_next(tmp))
+ {
+ g_free((CommitItem *) (tmp->data));
+ }
+ g_slist_free(lst);
+}
+
+static void
+free_commit_list(GSList * lst)
+{
+ GSList *tmp;
+ if (!lst)
+ return;
+ for (tmp = lst; tmp != NULL; tmp = g_slist_next(tmp))
+ {
+ g_free(((CommitItem *) (tmp->data))->path);
+ g_free((CommitItem *) (tmp->data));
+ }
+ g_slist_free(lst);
+}
+
+gchar *
+find_subdir_path(const gchar * filename, const gchar * subdir)
+{
+ gboolean ret = FALSE;
+ gchar *base;
+ gchar *gitdir;
+ gchar *base_prev = g_strdup(":");
+
+ if (g_file_test(filename, G_FILE_TEST_IS_DIR))
+ base = g_strdup(filename);
+ else
+ base = g_path_get_dirname(filename);
+
+ while (strcmp(base, base_prev) != 0)
+ {
+ gitdir = g_build_filename(base, subdir, NULL);
+ ret = g_file_test(gitdir, G_FILE_TEST_IS_DIR);
+ g_free(gitdir);
+ if (ret)
+ break;
+ g_free(base_prev);
+ base_prev = base;
+ base = g_path_get_dirname(base);
+ }
+
+ g_free(base_prev);
+ if (ret)
+ return base;
+ g_free(base);
+ return NULL;
+}
+
+static gboolean
+find_subdir(const gchar * filename, const gchar * subdir)
+{
+ gchar *basedir;
+ basedir = find_subdir_path(filename, subdir);
+ if (basedir)
+ {
+ g_free(basedir);
+ return TRUE;
+ }
+ return FALSE;
+}
+
+gboolean
+find_dir(const gchar * filename, const char *find, gboolean recursive)
+{
+ gboolean ret;
+ gchar *base;
+ gchar *dir;
+
+ if (!filename)
+ return FALSE;
+
+ if (recursive)
+ {
+ ret = find_subdir(filename, find);
+ }
+ else
+ {
+ if (g_file_test(filename, G_FILE_TEST_IS_DIR))
+ base = g_strdup(filename);
+ else
+ base = g_path_get_dirname(filename);
+ dir = g_build_filename(base, find, NULL);
+
+ ret = g_file_test(dir, G_FILE_TEST_IS_DIR);
+
+ g_free(base);
+ g_free(dir);
+ }
+ return ret;
+}
+
+
+static const VC_RECORD *
+find_vc(const char *filename)
+{
+ GSList *tmp;
+
+ for (tmp = VC; tmp != NULL; tmp = g_slist_next(tmp))
+ {
+ if (((VC_RECORD *) tmp->data)->in_vc(filename))
+ {
+ return (VC_RECORD *) tmp->data;
+ }
+ }
+ return NULL;
+}
+
+static void *
+find_cmd_env(gint cmd_type, gboolean cmd, const gchar * filename)
+{
+ const VC_RECORD *vc;
+ vc = find_vc(filename);
+ if (vc)
+ {
+ if (cmd)
+ return vc->commands[cmd_type];
+ else
+ return vc->envs[cmd_type];
+ }
+ return NULL;
+}
+
+/* Get list of commands for given command spec*/
+static GSList *
+get_cmd(const gchar ** argv, const gchar * filename, GSList * filelist, const gchar * message)
+{
+ gint i, j;
+ gint len = 0;
+ gchar **ret;
+ gchar *dir;
+ gchar *base_filename;
+ GSList *head = NULL;
+ GSList *tmp;
+ GString *repl;
+
+ if (g_file_test(filename, G_FILE_TEST_IS_DIR))
+ {
+ dir = g_strdup(filename);
+ }
+ else
+ {
+ dir = g_path_get_dirname(filename);
+ }
+ base_filename = g_path_get_basename(filename);
+
+ while (1)
+ {
+ if (argv[len] == NULL)
+ break;
+ len++;
+ }
+ if (filelist)
+ ret = g_malloc0(sizeof(gchar *) * (len * g_slist_length(filelist) + 1));
+ else
+ ret = g_malloc0(sizeof(gchar *) * (len + 1));
+
+ head = g_slist_alloc();
+ head->data = ret;
+
+ for (i = 0, j = 0; i < len; i++, j++)
+ {
+ if (argv[i] == CMD_SEPARATOR)
+ {
+ if (filelist)
+ ret = g_malloc0(sizeof(gchar *) *
+ (len * g_slist_length(filelist) + 1));
+ else
+ ret = g_malloc0(sizeof(gchar *) * (len + 1));
+ j = -1;
+ head = g_slist_append(head, ret);
+ }
+ else if (argv[i] == DIRNAME)
+ {
+ ret[j] = p_utils->get_locale_from_utf8(dir);
+ }
+ else if (argv[i] == FILENAME)
+ {
+ ret[j] = p_utils->get_locale_from_utf8(filename);
+ }
+ else if (argv[i] == BASE_FILENAME)
+ {
+ ret[j] = p_utils->get_locale_from_utf8(base_filename);
+ }
+ else if (argv[i] == FILE_LIST)
+ {
+ for (tmp = filelist; tmp != NULL; tmp = g_slist_next(tmp))
+ {
+ ret[j] = p_utils->get_locale_from_utf8((gchar *) tmp->data);
+ j++;
+ }
+ j--;
+ }
+ else if (argv[i] == MESSAGE)
+ {
+ ret[j] = p_utils->get_locale_from_utf8(message);
+ }
+ else
+ {
+ repl = g_string_new(argv[i]);
+ p_utils->string_replace_all(repl, P_DIRNAME, dir);
+ p_utils->string_replace_all(repl, P_FILENAME, filename);
+ p_utils->string_replace_all(repl, P_BASE_FILENAME, base_filename);
+ ret[j] = g_string_free(repl, FALSE);
+ setptr(ret[j], p_utils->get_locale_from_utf8(ret[j]));
+ }
+ }
+ g_free(dir);
+ g_free(base_filename);
+ return head;
+}
+
+
+/* name should be in UTF-8, and can have a path. */
+static void
+show_output(const gchar * std_output, const gchar * name, const gchar * force_encoding)
+{
+ gint page;
+ GtkNotebook *book;
+ GeanyDocument *doc, *cur_doc;
+
+ if (std_output)
+ {
+ cur_doc = p_document->get_current();
+ doc = p_document->find_by_filename(name);
+ if (doc == NULL)
+ {
+ doc = p_document->new_file(name, NULL, std_output);
+ }
+ else
+ {
+ p_sci->set_text(doc->sci, std_output);
+ book = GTK_NOTEBOOK(main_widgets->notebook);
+ page = gtk_notebook_page_num(book, GTK_WIDGET(doc->sci));
+ gtk_notebook_set_current_page(book, page);
+ }
+ p_document->set_text_changed(doc, set_changed_flag);
+ p_document->set_encoding(doc, (force_encoding ? force_encoding : "UTF-8"));
+ p_navqueue->goto_line(cur_doc, doc, 1);
+ }
+ else
+ {
+ p_ui->set_statusbar(FALSE, _("Could not parse the output of command"));
+ }
+}
+
+/*
+ * Execute command by command spec, return std_out std_err
+ *
+ * @argv - command spec
+ * @env - envirounment
+ * @std_out - if not NULL here will be returned standard output converted to utf8 of last command in spec
+ * @std_err - if not NULL here will be returned standard error converted to utf8 of last command in spec
+ * @filename - filename for spec, commands will be running in it's basedir . Used to replace FILENAME, BASE_FILENAME in spec
+ * @list - used to replace FILE_LIST in spec
+ * @message - used to replace MESSAGE in spec
+ *
+ * @return - exit code of last command in spec
+ */
+gint
+execute_custom_command(const gchar ** argv, const gchar ** env, gchar ** std_out, gchar ** std_err,
+ const gchar * filename, GSList * list, const gchar * message)
+{
+ gint exit_code;
+ gchar *dir;
+ GString *tmp;
+ GSList *cur;
+ GSList *largv = get_cmd(argv, filename, list, message);
+ GError *error = NULL;
+
+ if (std_out)
+ *std_out = NULL;
+ if (std_err)
+ *std_err = NULL;
+
+ if (!largv)
+ {
+ return 0;
+ }
+
+ if (g_file_test(filename, G_FILE_TEST_IS_DIR))
+ {
+ dir = g_strdup(filename);
+ }
+ else
+ {
+ dir = g_path_get_dirname(filename);
+ }
+
+ for (cur = largv; cur != NULL; cur = g_slist_next(cur))
+ {
+ argv = cur->data;
+ if (cur != g_slist_last(largv))
+ {
+ p_utils->spawn_sync(dir, cur->data, (gchar **) env,
+ G_SPAWN_SEARCH_PATH | G_SPAWN_STDOUT_TO_DEV_NULL |
+ G_SPAWN_STDERR_TO_DEV_NULL, NULL, NULL, NULL, NULL,
+ &exit_code, &error);
+ }
+ else
+ {
+ p_utils->spawn_sync(dir, cur->data, (gchar **) env,
+ G_SPAWN_SEARCH_PATH | (std_out ? 0 :
+ G_SPAWN_STDOUT_TO_DEV_NULL) |
+ (std_err ? 0 : G_SPAWN_STDERR_TO_DEV_NULL), NULL, NULL,
+ std_out, std_err, &exit_code, &error);
+ }
+ if (error)
+ {
+ fprintf(stderr, "geanyvc: s_spawn_sync error: %s\n", error->message);
+ p_ui->set_statusbar(FALSE, _("geanyvc: s_spawn_sync error: %s"),
+ error->message);
+ g_error_free(error);
+ }
+
+ // need to convert output text from the encoding of the original file into
+ // UTF-8 because internally Geany always needs UTF-8
+ if (std_out && *std_out)
+ {
+ tmp = g_string_new(*std_out);
+ p_utils->string_replace_all(tmp, "\r\n", "\n");
+ p_utils->string_replace_all(tmp, "\r", "\n");
+ setptr(*std_out, g_string_free(tmp, FALSE));
+
+ if (!g_utf8_validate(*std_out, -1, NULL))
+ {
+ setptr(*std_out, p_encodings->convert_to_utf8(*std_out,
+ strlen(*std_out),
+ NULL));
+ }
+ if (!NZV(*std_out))
+ {
+ g_free(*std_out);
+ *std_out = NULL;
+ }
+ }
+ if (std_err && *std_err)
+ {
+ tmp = g_string_new(*std_err);
+ p_utils->string_replace_all(tmp, "\r\n", "\n");
+ p_utils->string_replace_all(tmp, "\r", "\n");
+ setptr(*std_err, g_string_free(tmp, FALSE));
+
+ if (!g_utf8_validate(*std_err, -1, NULL))
+ {
+ setptr(*std_err, p_encodings->convert_to_utf8(*std_err,
+ strlen(*std_err),
+ NULL));
+ }
+ if (!NZV(*std_err))
+ {
+ g_free(*std_err);
+ *std_err = NULL;
+ }
+ }
+ g_strfreev(cur->data);
+ }
+ g_free(dir);
+ g_slist_free(largv);
+ return exit_code;
+}
+
+gint
+execute_command(const VC_RECORD * vc, gchar ** std_out, gchar ** std_err, const gchar * filename,
+ gint cmd, GSList * list, const gchar * message)
+{
+ if (std_out)
+ *std_out = NULL;
+ if (std_err)
+ *std_err = NULL;
+
+ if (((gchar **) vc->commands[cmd])[0] == CMD_FUNCTION)
+ {
+ typedef gint(*cmd_function) (gchar **, gchar **, const gchar *, GSList *,
+ const gchar *);
+ return ((cmd_function *) vc->commands[cmd])[1] (std_out, std_err, filename, list,
+ message);
+ }
+ return execute_custom_command(vc->commands[cmd], vc->envs[cmd], std_out, std_err, filename,
+ list, message);
+}
+
+/* Callback if menu item for a single file was activated */
+static void
+vcdiff_file_activated(G_GNUC_UNUSED GtkMenuItem * menuitem, G_GNUC_UNUSED gpointer gdata)
+{
+ gchar *text = NULL;
+ gchar *new, *old;
+ gchar *name;
+ gchar *localename;
+ const VC_RECORD *vc;
+ GeanyDocument *doc;
+
+ doc = p_document->get_current();
+ g_return_if_fail(doc != NULL && doc->file_name != NULL);
+
+ if (doc->changed)
+ {
+ p_document->save_file(doc, FALSE);
+ }
+
+ vc = find_vc(doc->file_name);
+ g_return_if_fail(vc);
+
+ execute_command(vc, &text, NULL, doc->file_name, VC_COMMAND_DIFF_FILE, NULL, NULL);
+ if (text)
+ {
+ if (set_external_diff && get_external_diff_viewer())
+ {
+ g_free(text);
+
+ /* 1) rename file to file.geany.~NEW~
+ 2) revert file
+ 3) rename file to file.geanyvc.~BASE~
+ 4) rename file.geany.~NEW~ to origin file
+ 5) show diff
+ */
+ localename = p_utils->get_locale_from_utf8(doc->file_name);
+
+ new = g_strconcat(doc->file_name, ".geanyvc.~NEW~", NULL);
+ setptr(new, p_utils->get_locale_from_utf8(new));
+
+ old = g_strconcat(doc->file_name, ".geanyvc.~BASE~", NULL);
+ setptr(old, p_utils->get_locale_from_utf8(old));
+
+ if (g_rename(localename, new) != 0)
+ {
+ fprintf(stderr,
+ _
+ ("geanyvc: vcdiff_file_activated: Unable to rename '%s' to '%s'\n"),
+ localename, new);
+ goto end;
+ }
+
+ execute_command(vc, NULL, NULL, doc->file_name,
+ VC_COMMAND_REVERT_FILE, NULL, NULL);
+
+ if (g_rename(localename, old) != 0)
+ {
+ fprintf(stderr,
+ _
+ ("geanyvc: vcdiff_file_activated: Unable to rename '%s' to '%s'\n"),
+ localename, old);
+ g_rename(new, localename);
+ goto end;
+ }
+ g_rename(new, localename);
+
+ vc_external_diff(old, localename);
+ g_unlink(old);
+ end:
+ g_free(old);
+ g_free(new);
+ g_free(localename);
+ return;
+ }
+ else
+ {
+ name = g_strconcat(doc->file_name, ".vc.diff", NULL);
+ show_output(text, name, doc->encoding);
+ g_free(text);
+ g_free(name);
+ }
+
+ }
+ else
+ {
+ p_ui->set_statusbar(FALSE, _("No changes were made."));
+ }
+}
+
+/* Make a diff from the current directory */
+static void
+vcdiff_dir_activated(G_GNUC_UNUSED GtkMenuItem * menuitem, G_GNUC_UNUSED gpointer gdata)
+{
+ gchar *base_name = NULL;
+ gchar *text = NULL;
+ const VC_RECORD *vc;
+ GeanyDocument *doc;
+
+ doc = p_document->get_current();
+ g_return_if_fail(doc != NULL && doc->file_name != NULL);
+
+ if (doc->changed)
+ {
+ p_document->save_file(doc, FALSE);
+ }
+
+ base_name = g_path_get_dirname(doc->file_name);
+
+ vc = find_vc(base_name);
+ g_return_if_fail(vc);
+
+ execute_command(vc, &text, NULL, base_name, VC_COMMAND_DIFF_DIR, NULL, NULL);
+ if (text)
+ {
+ setptr(base_name, g_strconcat(base_name, ".vc.diff", NULL));
+ show_output(text, base_name, NULL);
+ g_free(text);
+ }
+ else
+ {
+ p_ui->set_statusbar(FALSE, _("No changes were made."));
+ }
+
+ g_free(base_name);
+}
+
+
+/* Callback if menu item for the current project was activated */
+static void
+vcdiff_project_activated(G_GNUC_UNUSED GtkMenuItem * menuitem, G_GNUC_UNUSED gpointer gdata)
+{
+ gchar *text = NULL;
+ gchar *name;
+ const VC_RECORD *vc;
+ GeanyDocument *doc;
+
+ doc = p_document->get_current();
+
+ g_return_if_fail(project != NULL && NZV(project->base_path));
+
+ if (doc && doc->changed && doc->file_name != NULL)
+ {
+ p_document->save_file(doc, FALSE);
+ }
+
+ vc = find_vc(project->base_path);
+ g_return_if_fail(vc);
+
+ execute_command(vc, &text, NULL, project->base_path, VC_COMMAND_DIFF_DIR, NULL, NULL);
+ if (text)
+ {
+ name = g_strconcat(project->name, ".vc.diff", NULL);
+ show_output(text, name, NULL);
+ g_free(text);
+ g_free(name);
+ }
+ else
+ {
+ p_ui->set_statusbar(FALSE, _("No changes were made."));
+ }
+}
+
+static void
+vcblame_activated(G_GNUC_UNUSED GtkMenuItem * menuitem, G_GNUC_UNUSED gpointer gdata)
+{
+ gchar *text = NULL;
+ const VC_RECORD *vc;
+ GeanyDocument *doc;
+
+ doc = p_document->get_current();
+ g_return_if_fail(doc != NULL && doc->file_name != NULL);
+
+ vc = find_vc(doc->file_name);
+ g_return_if_fail(vc);
+
+ execute_command(vc, &text, NULL, doc->file_name, VC_COMMAND_BLAME, NULL, NULL);
+ if (text)
+ {
+ show_output(text, "*VC-BLAME*", NULL);
+ g_free(text);
+ }
+ else
+ {
+ p_ui->set_statusbar(FALSE, _("No history avaible"));
+ }
+}
+
+
+static void
+vclog_file_activated(G_GNUC_UNUSED GtkMenuItem * menuitem, G_GNUC_UNUSED gpointer gdata)
+{
+ gchar *output = NULL;
+ const VC_RECORD *vc;
+ GeanyDocument *doc;
+
+ doc = p_document->get_current();
+ g_return_if_fail(doc != NULL && doc->file_name != NULL);
+
+ p_ui->set_statusbar(TRUE, doc->file_name);
+
+ vc = find_vc(doc->file_name);
+ g_return_if_fail(vc);
+
+ execute_command(vc, &output, NULL, doc->file_name, VC_COMMAND_LOG_FILE, NULL, NULL);
+ if (output)
+ {
+ show_output(output, "*VC-LOG*", NULL);
+ g_free(output);
+ }
+}
+
+static void
+vclog_dir_activated(G_GNUC_UNUSED GtkMenuItem * menuitem, G_GNUC_UNUSED gpointer gdata)
+{
+ gchar *base_name = NULL;
+ gchar *text = NULL;
+ const VC_RECORD *vc;
+ GeanyDocument *doc;
+
+ doc = p_document->get_current();
+ g_return_if_fail(doc != NULL && doc->file_name != NULL);
+
+ base_name = g_path_get_dirname(doc->file_name);
+
+ vc = find_vc(base_name);
+ g_return_if_fail(vc);
+
+ execute_command(vc, &text, NULL, base_name, VC_COMMAND_LOG_DIR, NULL, NULL);
+ if (text)
+ {
+ show_output(text, "*VC-LOG*", NULL);
+ g_free(text);
+ }
+
+ g_free(base_name);
+}
+
+static void
+vclog_project_activated(G_GNUC_UNUSED GtkMenuItem * menuitem, G_GNUC_UNUSED gpointer gdata)
+{
+ gchar *text = NULL;
+ const VC_RECORD *vc;
+
+ g_return_if_fail(project != NULL && NZV(project->base_path));
+
+ vc = find_vc(project->base_path);
+ g_return_if_fail(vc);
+
+ execute_command(vc, &text, NULL, project->base_path, VC_COMMAND_LOG_DIR, NULL, NULL);
+ if (text)
+ {
+ show_output(text, "*VC-LOG*", NULL);
+ g_free(text);
+ }
+}
+
+/* Show status from the current directory */
+static void
+vcstatus_activated(G_GNUC_UNUSED GtkMenuItem * menuitem, G_GNUC_UNUSED gpointer gdata)
+{
+ gchar *base_name = NULL;
+ gchar *text = NULL;
+ const VC_RECORD *vc;
+ GeanyDocument *doc;
+
+ doc = p_document->get_current();
+ g_return_if_fail(doc != NULL && doc->file_name != NULL);
+
+ if (doc->changed)
+ {
+ p_document->save_file(doc, FALSE);
+ }
+
+ base_name = g_path_get_dirname(doc->file_name);
+
+ vc = find_vc(base_name);
+ g_return_if_fail(vc);
+
+ execute_command(vc, &text, NULL, base_name, VC_COMMAND_STATUS, NULL, NULL);
+ if (text)
+ {
+ show_output(text, "*VC-STATUS*", NULL);
+ g_free(text);
+ }
+
+ g_free(base_name);
+}
+
+static gboolean
+command_with_question_activated(G_GNUC_UNUSED GtkMenuItem * menuitem, G_GNUC_UNUSED gpointer gdata,
+ gint cmd, const gchar * question, gboolean ask)
+{
+ gchar *text;
+ GtkWidget *dialog;
+ gint result;
+ gchar *dir;
+ const VC_RECORD *vc;
+ GeanyDocument *doc;
+
+ doc = p_document->get_current();
+ g_return_val_if_fail(doc != NULL && doc->file_name != NULL, FALSE);
+
+ if (doc->changed)
+ {
+ p_document->save_file(doc, FALSE);
+ }
+
+ if (ask)
+ {
+ dialog = gtk_message_dialog_new(GTK_WINDOW(main_widgets->window),
+ GTK_DIALOG_DESTROY_WITH_PARENT,
+ GTK_MESSAGE_QUESTION,
+ GTK_BUTTONS_YES_NO, question, doc->file_name);
+ result = gtk_dialog_run(GTK_DIALOG(dialog));
+ gtk_widget_destroy(dialog);
+ }
+ else
+ {
+ result = GTK_RESPONSE_YES;
+ }
+
+ if (result == GTK_RESPONSE_YES)
+ {
+ dir = g_path_get_dirname(doc->file_name);
+ vc = find_vc(dir);
+ g_return_val_if_fail(vc, FALSE);
+
+ execute_command(vc, &text, NULL, doc->file_name, cmd, NULL, NULL);
+ if (text)
+ {
+ g_free(text);
+ }
+ g_free(dir);
+ }
+ return (result == GTK_RESPONSE_YES) ? TRUE : FALSE;
+}
+
+static void
+vcrevert_activated(GtkMenuItem * menuitem, gpointer gdata)
+{
+ gboolean ret;
+ GeanyDocument *doc;
+
+ doc = p_document->get_current();
+ g_return_if_fail(doc != NULL && doc->file_name != NULL);
+
+ ret = command_with_question_activated(menuitem, gdata, VC_COMMAND_REVERT_FILE,
+ _("Do you really want to revert: %s"), TRUE);
+ if (ret)
+ {
+ p_document->reload_file(doc, NULL);
+ }
+}
+
+
+static void
+vcadd_activated(GtkMenuItem * menuitem, gpointer gdata)
+{
+ command_with_question_activated(menuitem, gdata, VC_COMMAND_ADD,
+ _("Do you really want to add: %s"), set_add_confirmation);
+}
+
+static void
+vcremove_activated(GtkMenuItem * menuitem, gpointer gdata)
+{
+ gboolean ret;
+
+ ret = command_with_question_activated(menuitem, gdata, VC_COMMAND_REMOVE,
+ _("Do you really want to remove: %s"), TRUE);
+ if (ret)
+ {
+ p_document->
+ remove_page(gtk_notebook_get_current_page
+ (GTK_NOTEBOOK(main_widgets->notebook)));
+ }
+}
+
+enum
+{
+ COLUMN_COMMIT,
+ COLUMN_STATUS,
+ COLUMN_PATH,
+ NUM_COLUMNS
+};
+
+static GtkTreeModel *
+create_commit_model(const GSList * commit)
+{
+ GtkListStore *store;
+ GtkTreeIter iter;
+ const GSList *cur;
+
+ /* create list store */
+ store = gtk_list_store_new(NUM_COLUMNS, G_TYPE_BOOLEAN, G_TYPE_STRING, G_TYPE_STRING);
+
+ /* add data to the list store */
+
+ for (cur = commit; cur != NULL; cur = g_slist_next(cur))
+ {
+ gtk_list_store_append(store, &iter);
+ gtk_list_store_set(store, &iter,
+ COLUMN_COMMIT, TRUE,
+ COLUMN_STATUS, ((CommitItem *) (cur->data))->status,
+ COLUMN_PATH, ((CommitItem *) (cur->data))->path, -1);
+ }
+
+ return GTK_TREE_MODEL(store);
+}
+
+static gboolean
+get_commit_files_foreach(GtkTreeModel * model, G_GNUC_UNUSED GtkTreePath * path, GtkTreeIter * iter,
+ gpointer data)
+{
+ GSList **files = (GSList **) data;
+ gboolean commit;
+ gchar *filename;
+
+ gtk_tree_model_get(model, iter, COLUMN_COMMIT, &commit, -1);
+ if (!commit)
+ return FALSE;
+
+ gtk_tree_model_get(model, iter, COLUMN_PATH, &filename, -1);
+ *files = g_slist_prepend(*files, filename);
+ return FALSE;
+}
+
+static gboolean
+get_commit_diff_foreach(GtkTreeModel * model, G_GNUC_UNUSED GtkTreePath * path, GtkTreeIter * iter,
+ gpointer data)
+{
+ gchar **diff = (gchar **) data;
+ gboolean commit;
+ gchar *filename;
+ gchar *tmp = NULL;
+ gchar *status;
+ const VC_RECORD *vc;
+
+ gtk_tree_model_get(model, iter, COLUMN_COMMIT, &commit, -1);
+ if (!commit)
+ return FALSE;
+
+ gtk_tree_model_get(model, iter, COLUMN_STATUS, &status, -1);
+
+ if (strcmp(status, FILE_STATUS_MODIFIED) != 0)
+ {
+ g_free(status);
+ return FALSE;
+ }
+
+ gtk_tree_model_get(model, iter, COLUMN_PATH, &filename, -1);
+
+ vc = find_vc(filename);
+ g_return_val_if_fail(vc, FALSE);
+
+ execute_command(vc, &tmp, NULL, filename, VC_COMMAND_DIFF_FILE, NULL, NULL);
+ if (tmp)
+ {
+ setptr(*diff, g_strdup_printf("%s%s", *diff, tmp));
+ g_free(tmp);
+ }
+ else
+ {
+ fprintf(stderr, "error: geanyvc: get_commit_diff_foreach: empty diff output\n");
+ }
+ g_free(filename);
+ return FALSE;
+}
+
+static gchar *
+get_commit_diff(GtkTreeView * treeview)
+{
+ GtkTreeModel *model = gtk_tree_view_get_model(treeview);
+ gchar *ret = g_strdup("");
+
+ gtk_tree_model_foreach(model, get_commit_diff_foreach, &ret);
+ return ret;
+}
+
+static void
+set_diff_buff(GtkTextBuffer * buffer, const gchar * txt)
+{
+ GtkTextIter start, end;
+ const gchar *tagname = "";
+
+ const gchar *p = txt;
+ gtk_text_buffer_set_text(buffer, txt, -1);
+
+ gtk_text_buffer_get_start_iter(buffer, &start);
+ gtk_text_buffer_get_end_iter(buffer, &end);
+
+ gtk_text_buffer_remove_all_tags(buffer, &start, &end);
+
+ while (p)
+ {
+ if (*p == '-')
+ {
+ tagname = "deleted";
+ }
+ else if (*p == '+')
+ {
+ tagname = "added";
+ }
+ else if (*p == ' ')
+ {
+ tagname = "";
+ }
+ else
+ {
+ tagname = "default";
+ }
+ gtk_text_buffer_get_iter_at_offset(buffer, &start,
+ g_utf8_pointer_to_offset(txt, p));
+
+ p = strchr(p, '\n');
+ if (p)
+ {
+ if (*tagname)
+ {
+ gtk_text_buffer_get_iter_at_offset(buffer, &end,
+ g_utf8_pointer_to_offset(txt,
+ p));
+ gtk_text_buffer_apply_tag_by_name(buffer, tagname, &start, &end);
+ }
+ p++;
+ }
+ }
+}
+
+static void
+commit_toggled(G_GNUC_UNUSED GtkCellRendererToggle * cell, gchar * path_str, gpointer data)
+{
+ GtkTreeView *treeview = GTK_TREE_VIEW(data);
+ GtkWidget *diffView = p_support->lookup_widget(GTK_WIDGET(treeview), "textDiff");
+ GtkTreeModel *model = gtk_tree_view_get_model(treeview);
+ GtkTreeIter iter;
+ GtkTreePath *path = gtk_tree_path_new_from_string(path_str);
+ gboolean fixed;
+ gchar *diff;
+
+ /* get toggled iter */
+ gtk_tree_model_get_iter(model, &iter, path);
+ gtk_tree_model_get(model, &iter, COLUMN_COMMIT, &fixed, -1);
+
+ /* do something with the value */
+ fixed ^= 1;
+
+ /* set new value */
+ gtk_list_store_set(GTK_LIST_STORE(model), &iter, COLUMN_COMMIT, fixed, -1);
+
+ diff = get_commit_diff(GTK_TREE_VIEW(treeview));
+ set_diff_buff(gtk_text_view_get_buffer(GTK_TEXT_VIEW(diffView)), diff);
+
+ /* clean up */
+ gtk_tree_path_free(path);
+ g_free(diff);
+}
+
+static void
+add_commit_columns(GtkTreeView * treeview)
+{
+ GtkCellRenderer *renderer;
+ GtkTreeViewColumn *column;
+
+ /* column for fixed toggles */
+ renderer = gtk_cell_renderer_toggle_new();
+ g_signal_connect(renderer, "toggled", G_CALLBACK(commit_toggled), treeview);
+
+ column = gtk_tree_view_column_new_with_attributes("Commit?",
+ renderer, "active", COLUMN_COMMIT, NULL);
+
+ /* set this column to a fixed sizing (of 50 pixels) */
+ gtk_tree_view_column_set_sizing(GTK_TREE_VIEW_COLUMN(column), GTK_TREE_VIEW_COLUMN_FIXED);
+ gtk_tree_view_column_set_fixed_width(GTK_TREE_VIEW_COLUMN(column), 70);
+ gtk_tree_view_append_column(treeview, column);
+
+ /* column for bug numbers */
+ renderer = gtk_cell_renderer_text_new();
+ column = gtk_tree_view_column_new_with_attributes("Status",
+ renderer, "text", COLUMN_STATUS, NULL);
+ gtk_tree_view_column_set_sort_column_id(column, COLUMN_STATUS);
+ gtk_tree_view_append_column(treeview, column);
+
+ /* column for severities */
+ renderer = gtk_cell_renderer_text_new();
+ column = gtk_tree_view_column_new_with_attributes("Path",
+ renderer, "text", COLUMN_PATH, NULL);
+ gtk_tree_view_column_set_sort_column_id(column, COLUMN_PATH);
+ gtk_tree_view_append_column(treeview, column);
+}
+
+static GdkColor *
+get_diff_color(G_GNUC_UNUSED GeanyDocument * doc, gint style)
+{
+ static GdkColor c = { 0, 0, 0, 0 };
+ const HighlightingStyle *s;
+
+ s = p_highlighting->get_style(GEANY_FILETYPES_DIFF, style);
+ c.red = (s->foreground % 256) * 257;
+ c.green = s->foreground & -16711936;
+ c.blue = (s->foreground & 0xff0000) / 256;
+
+ return &c;
+}
+
+#define GLADE_HOOKUP_OBJECT(component,widget,name) \
+ g_object_set_data_full (G_OBJECT (component), name, \
+ gtk_widget_ref (widget), (GDestroyNotify) gtk_widget_unref)
+
+#define GLADE_HOOKUP_OBJECT_NO_REF(component,widget,name) \
+ g_object_set_data (G_OBJECT (component), name, widget)
+
+GtkWidget *
+create_commitDialog(void)
+{
+ GtkWidget *commitDialog;
+ GtkWidget *dialog_vbox1;
+ GtkWidget *vpaned1;
+ GtkWidget *scrolledwindow1;
+ GtkWidget *treeSelect;
+ GtkWidget *vpaned2;
+ GtkWidget *scrolledwindow2;
+ GtkWidget *textDiff;
+ GtkWidget *frame1;
+ GtkWidget *alignment1;
+ GtkWidget *scrolledwindow3;
+ GtkWidget *textCommitMessage;
+ GtkWidget *label1;
+ GtkWidget *dialog_action_area1;
+ GtkWidget *btnCancel;
+ GtkWidget *btnCommit;
+
+ gchar *rcstyle = g_strdup_printf("style \"geanyvc-diff-font\"\n"
+ "{\n"
+ " font_name=\"%s\"\n"
+ "}\n"
+ "widget \"*.GeanyVCCommitDialogDiff\" style \"geanyvc-diff-font\"",
+ geany_data->interface_prefs->editor_font);
+
+ gtk_rc_parse_string(rcstyle);
+ g_free(rcstyle);
+
+ commitDialog = gtk_dialog_new();
+ gtk_container_set_border_width(GTK_CONTAINER(commitDialog), 5);
+ gtk_widget_set_events(commitDialog,
+ GDK_POINTER_MOTION_MASK | GDK_POINTER_MOTION_HINT_MASK |
+ GDK_BUTTON_PRESS_MASK | GDK_BUTTON_RELEASE_MASK);
+ gtk_window_set_title(GTK_WINDOW(commitDialog), _("Commit"));
+ gtk_window_set_position(GTK_WINDOW(commitDialog), GTK_WIN_POS_CENTER_ON_PARENT);
+ gtk_window_set_modal(GTK_WINDOW(commitDialog), TRUE);
+ gtk_window_set_destroy_with_parent(GTK_WINDOW(commitDialog), TRUE);
+ gtk_window_set_type_hint(GTK_WINDOW(commitDialog), GDK_WINDOW_TYPE_HINT_DIALOG);
+ gtk_dialog_set_has_separator(GTK_DIALOG(commitDialog), FALSE);
+
+ dialog_vbox1 = GTK_DIALOG(commitDialog)->vbox;
+ gtk_widget_show(dialog_vbox1);
+
+ vpaned1 = gtk_vpaned_new();
+ gtk_widget_show(vpaned1);
+ gtk_box_pack_start(GTK_BOX(dialog_vbox1), vpaned1, TRUE, TRUE, 0);
+
+ scrolledwindow1 = gtk_scrolled_window_new(NULL, NULL);
+ gtk_widget_show(scrolledwindow1);
+ gtk_paned_pack1(GTK_PANED(vpaned1), scrolledwindow1, FALSE, TRUE);
+ gtk_scrolled_window_set_policy(GTK_SCROLLED_WINDOW(scrolledwindow1), GTK_POLICY_AUTOMATIC,
+ GTK_POLICY_AUTOMATIC);
+
+ treeSelect = gtk_tree_view_new();
+ gtk_widget_show(treeSelect);
+ gtk_container_add(GTK_CONTAINER(scrolledwindow1), treeSelect);
+ gtk_widget_set_events(treeSelect,
+ GDK_POINTER_MOTION_MASK | GDK_POINTER_MOTION_HINT_MASK |
+ GDK_BUTTON_PRESS_MASK | GDK_BUTTON_RELEASE_MASK);
+
+ vpaned2 = gtk_vpaned_new();
+ gtk_widget_show(vpaned2);
+ gtk_paned_pack2(GTK_PANED(vpaned1), vpaned2, TRUE, TRUE);
+
+ scrolledwindow2 = gtk_scrolled_window_new(NULL, NULL);
+ gtk_widget_show(scrolledwindow2);
+ gtk_paned_pack1(GTK_PANED(vpaned2), scrolledwindow2, TRUE, TRUE);
+ gtk_scrolled_window_set_policy(GTK_SCROLLED_WINDOW(scrolledwindow2), GTK_POLICY_AUTOMATIC,
+ GTK_POLICY_AUTOMATIC);
+ gtk_scrolled_window_set_shadow_type(GTK_SCROLLED_WINDOW(scrolledwindow2), GTK_SHADOW_IN);
+
+ textDiff = gtk_text_view_new();
+ gtk_widget_set_name(textDiff, "GeanyVCCommitDialogDiff");
+ gtk_widget_show(textDiff);
+ gtk_container_add(GTK_CONTAINER(scrolledwindow2), textDiff);
+ gtk_widget_set_events(textDiff,
+ GDK_POINTER_MOTION_MASK | GDK_POINTER_MOTION_HINT_MASK |
+ GDK_BUTTON_PRESS_MASK | GDK_BUTTON_RELEASE_MASK);
+ gtk_text_view_set_editable(GTK_TEXT_VIEW(textDiff), FALSE);
+
+ frame1 = gtk_frame_new(NULL);
+ gtk_widget_show(frame1);
+ gtk_paned_pack2(GTK_PANED(vpaned2), frame1, TRUE, TRUE);
+ gtk_frame_set_shadow_type(GTK_FRAME(frame1), GTK_SHADOW_NONE);
+
+ alignment1 = gtk_alignment_new(0.5, 0.5, 1, 1);
+ gtk_widget_show(alignment1);
+ gtk_container_add(GTK_CONTAINER(frame1), alignment1);
+ gtk_alignment_set_padding(GTK_ALIGNMENT(alignment1), 0, 0, 12, 0);
+
+ scrolledwindow3 = gtk_scrolled_window_new(NULL, NULL);
+ gtk_widget_show(scrolledwindow3);
+ gtk_container_add(GTK_CONTAINER(alignment1), scrolledwindow3);
+ gtk_scrolled_window_set_policy(GTK_SCROLLED_WINDOW(scrolledwindow3), GTK_POLICY_AUTOMATIC,
+ GTK_POLICY_AUTOMATIC);
+ gtk_scrolled_window_set_shadow_type(GTK_SCROLLED_WINDOW(scrolledwindow3), GTK_SHADOW_IN);
+
+ textCommitMessage = gtk_text_view_new();
+ gtk_widget_show(textCommitMessage);
+ gtk_container_add(GTK_CONTAINER(scrolledwindow3), textCommitMessage);
+ gtk_widget_set_events(textCommitMessage,
+ GDK_POINTER_MOTION_MASK | GDK_POINTER_MOTION_HINT_MASK |
+ GDK_BUTTON_PRESS_MASK | GDK_BUTTON_RELEASE_MASK);
+
+ label1 = gtk_label_new(_("<b>Commit message:</b>"));
+ gtk_widget_show(label1);
+ gtk_frame_set_label_widget(GTK_FRAME(frame1), label1);
+ gtk_label_set_use_markup(GTK_LABEL(label1), TRUE);
+
+ dialog_action_area1 = GTK_DIALOG(commitDialog)->action_area;
+ gtk_widget_show(dialog_action_area1);
+ gtk_button_box_set_layout(GTK_BUTTON_BOX(dialog_action_area1), GTK_BUTTONBOX_END);
+
+ btnCancel = gtk_button_new_from_stock("gtk-cancel");
+ gtk_widget_show(btnCancel);
+ gtk_dialog_add_action_widget(GTK_DIALOG(commitDialog), btnCancel, GTK_RESPONSE_CANCEL);
+
+ btnCommit = gtk_button_new_with_mnemonic(_("_Commit"));
+ gtk_widget_show(btnCommit);
+ gtk_dialog_add_action_widget(GTK_DIALOG(commitDialog), btnCommit, GTK_RESPONSE_APPLY);
+
+ /* Store pointers to all widgets, for use by lookup_widget(). */
+ GLADE_HOOKUP_OBJECT_NO_REF(commitDialog, commitDialog, "commitDialog");
+ GLADE_HOOKUP_OBJECT_NO_REF(commitDialog, dialog_vbox1, "dialog_vbox1");
+ GLADE_HOOKUP_OBJECT(commitDialog, vpaned1, "vpaned1");
+ GLADE_HOOKUP_OBJECT(commitDialog, scrolledwindow1, "scrolledwindow1");
+ GLADE_HOOKUP_OBJECT(commitDialog, treeSelect, "treeSelect");
+ GLADE_HOOKUP_OBJECT(commitDialog, vpaned2, "vpaned2");
+ GLADE_HOOKUP_OBJECT(commitDialog, scrolledwindow2, "scrolledwindow2");
+ GLADE_HOOKUP_OBJECT(commitDialog, textDiff, "textDiff");
+ GLADE_HOOKUP_OBJECT(commitDialog, frame1, "frame1");
+ GLADE_HOOKUP_OBJECT(commitDialog, alignment1, "alignment1");
+ GLADE_HOOKUP_OBJECT(commitDialog, scrolledwindow3, "scrolledwindow3");
+ GLADE_HOOKUP_OBJECT(commitDialog, textCommitMessage, "textCommitMessage");
+ GLADE_HOOKUP_OBJECT(commitDialog, label1, "label1");
+ GLADE_HOOKUP_OBJECT_NO_REF(commitDialog, dialog_action_area1, "dialog_action_area1");
+ GLADE_HOOKUP_OBJECT(commitDialog, btnCancel, "btnCancel");
+ GLADE_HOOKUP_OBJECT(commitDialog, btnCommit, "btnCommit");
+
+ return commitDialog;
+}
+
+static void
+vccommit_activated(G_GNUC_UNUSED GtkMenuItem * menuitem, G_GNUC_UNUSED gpointer gdata)
+{
+ GeanyDocument *doc;
+ gint result;
+ const VC_RECORD *vc;
+ GSList *lst;
+ GtkTreeModel *model;
+ GtkWidget *commit = create_commitDialog();
+ GtkWidget *treeview = p_support->lookup_widget(commit, "treeSelect");
+ GtkWidget *diffView = p_support->lookup_widget(commit, "textDiff");
+ GtkWidget *messageView = p_support->lookup_widget(commit, "textCommitMessage");
+ GtkWidget *vpaned1 = p_support->lookup_widget(commit, "vpaned1");
+ GtkWidget *vpaned2 = p_support->lookup_widget(commit, "vpaned2");
+
+ GtkTextBuffer *mbuf;
+ GtkTextBuffer *diffbuf;
+
+ GtkTextIter begin;
+ GtkTextIter end;
+ GSList *selected_files = NULL;
+
+ gchar *dir;
+ gchar *message;
+ gchar *diff;
+
+ gint height;
+
+#ifdef USE_GTKSPELL
+ GtkSpell *speller = NULL;
+ GError *spellcheck_error = NULL;
+#endif
+
+ doc = p_document->get_current();
+ g_return_if_fail(doc);
+ g_return_if_fail(doc->file_name);
+ dir = g_path_get_dirname(doc->file_name);
+
+ vc = find_vc(dir);
+ g_return_if_fail(vc);
+
+ lst = vc->get_commit_files(dir);
+ if (!lst)
+ {
+ g_free(dir);
+ p_ui->set_statusbar(FALSE, _("Nothing to commit."));
+ return;
+ }
+
+ model = create_commit_model(lst);
+ gtk_tree_view_set_model(GTK_TREE_VIEW(treeview), model);
+ g_object_unref(model);
+
+ /* add columns to the tree view */
+ add_commit_columns(GTK_TREE_VIEW(treeview));
+
+ diff = get_commit_diff(GTK_TREE_VIEW(treeview));
+ diffbuf = gtk_text_view_get_buffer(GTK_TEXT_VIEW(diffView));
+
+ gtk_text_buffer_create_tag(diffbuf, "deleted", "foreground-gdk",
+ get_diff_color(doc, SCE_DIFF_DELETED), NULL);
+
+ gtk_text_buffer_create_tag(diffbuf, "added", "foreground-gdk",
+ get_diff_color(doc, SCE_DIFF_ADDED), NULL);
+
+ gtk_text_buffer_create_tag(diffbuf, "default", "foreground-gdk",
+ get_diff_color(doc, SCE_DIFF_POSITION), NULL);
+
+ set_diff_buff(diffbuf, diff);
+
+ if (set_maximize_commit_dialog)
+ {
+ gtk_window_maximize(GTK_WINDOW(commit));
+ gtk_widget_show_now(commit);
+ gtk_window_get_size(GTK_WINDOW(commit), NULL, &height);
+ gtk_paned_set_position(GTK_PANED(vpaned1), height * 30 / 100);
+ gtk_paned_set_position(GTK_PANED(vpaned2), height * 15 / 100);
+ }
+ else
+ {
+ gtk_widget_set_size_request(commit, 700, 500);
+ gtk_widget_show_now(commit);
+ gtk_window_get_size(GTK_WINDOW(commit), NULL, &height);
+ gtk_paned_set_position(GTK_PANED(vpaned1), height * 30 / 100);
+ gtk_paned_set_position(GTK_PANED(vpaned2), height * 55 / 100);
+ }
+
+#ifdef USE_GTKSPELL
+ speller = gtkspell_new_attach(GTK_TEXT_VIEW(messageView), NULL, &spellcheck_error);
+ if (speller == NULL)
+ {
+ p_ui->set_statusbar(FALSE, _("Error initializing spell checking: %s"),
+ spellcheck_error->message);
+ g_error_free(spellcheck_error);
+ spellcheck_error = NULL;
+ }
+ else if (lang != NULL)
+ {
+ gtkspell_set_language(speller, lang, &spellcheck_error);
+ if (spellcheck_error != NULL)
+ {
+ p_ui->set_statusbar(TRUE,
+ _
@@ Diff output truncated at 100000 characters. @@
This was sent by the SourceForge.net collaborative development platform, the world's largest Open Source development site.