I'm using the geany 1.32 default installation on ubuntu 18.04 64bit to edit test.md file.
for H1 - H6 headers, the "#" signs are bold, but not the rest of header, i.e. "# Header" only has bold for '#' not for the word 'Header'.
`**bold**` does not show bold, neither does `*italiic*` displays italic.
I can customize them all using filetypes.markdown, except for the H1-H6 headers, the header is not impacted at all as mentioned above, for example:
`header1=0xFFCB4F;0x1E1E1E;true;false` this change will make `#` bold with specified background/front color, but not the header content, i.e. "Header1" in `# Header1` stays non-bold.
At least I would like to have all markdown headers shown as bold inside Geany without the need of any previewer
--
You are receiving this because you are subscribed to this thread.
Reply to this email directly or view it on GitHub:
https://github.com/geany/geany/issues/2026
Most likely the string doesn't make sense to be transalted
--
You are receiving this because you are subscribed to this thread.
Reply to this email directly or view it on GitHub:
https://github.com/geany/geany-plugins/issues/587
It would be convenient to append items "copy filename" and "copy filepath" on tabs right click menu
---
Reply to this email directly or view it on GitHub:
https://github.com/geany/geany/issues/868
Like the documentation says, Reflow Lines/Block breaks lines **at** the long line marker if the line breaking is disabled. The problem is that the long line marker marks characters **after** the given column. This means that Reflow Lines/Block should probably reflow at `eprefs->long_line_column + 1`:
https://github.com/geany/geany/blob/b6fe9f17aeae40ab48e73481e618877e65db464…
--
You are receiving this because you are subscribed to this thread.
Reply to this email directly or view it on GitHub:
https://github.com/geany/geany/issues/2078
I have been attempting to compile geany from git and although it appears to build successfully, when I try to run it, the following error is displayed:
> (geany:29825): Geany-ERROR **: 16:14:48.297: Cannot create user-interface: Failed to open file “geany.glade”: No such file or directory
Trace/breakpoint trap
I have configured the build with './autogen.sh --prefix=/opt/geany' and when I type in the following:
> /opt/geany/bin/geany --print-prefix
the following is displayed:
> /opt/geany
/opt/geany/share
/opt/geany/lib
/opt/geany/share/locale
Due to the error, I tried to install from the repository for my linux distribution (Debian testing/buster) on a 64 bit machine and even their version has the same problem.
I can change to the /opt/geany/share/geany directory and then run the program and it will start up (as the glade file is in that directory) but then it will not load the plugins that I have also built from git.
I note that in the Makefile that GEANY_DATA_DIR is being set to /opt/geany/share/geany which seems to be correct but it does not seem to be getting taken into account in the final executable or libraries.
Any help in this matter would be much appreciated.
--
You are receiving this because you are subscribed to this thread.
Reply to this email directly or view it on GitHub:
https://github.com/geany/geany/issues/1915
It would be great to have the ability to create multiple carets, select multiple pieces, or progressively clone a selection of a word to the next identical match creating multiple selections, not necessarily square, and then be able to type, delete, replace, etc. using the multiple carets until Esc is hit, pasting into all carets with Ctrl-V, and so on.
Here's an animated demonstration of these features: https://www.sublimetext.com/
This is Sublime Text's killer feature, and this would put Geany closer to one of the most reputed, feature rich commercial multiplatform editors, while still being free software. I believe there's support for this in Scintilla, at least to some extent.
This supersets #850.
---
You are receiving this because you are subscribed to this thread.
Reply to this email directly or view it on GitHub:
https://github.com/geany/geany/issues/1141
I'm using Geany 1.30.1 on Windows 7.
After happily editing a file over some time, suddenly Geany refuses to save it with this error message:
I know that Windows sometimes grabs a lock on a file when I'm just looking at it with another tool, but I am pretty sure that the only way I'm operating on this file since the last bootup of my machine, is by editing it in Geany. Still, for the safe side, I run the [Handle](https://technet.microsoft.com/en-us/sysinternals/bb896653) utility to see whether someone has a handle to either the file or the directory where the file is in - nothing. I also used Geany's "File/Properties" to check, whether maybe the file secretly became readonly; this is also not the case. Finally I turned on the gio_unsafe_save_backup and tried again, but same result. Note that it is a local file, so there can't be network issues involved either.
Then I tried "save as" with "rename", to store it under a new name in the same directory. This was refused with the same error message. I could see that the file got renamed, but still had the old content. This is weird: If the cause would be a directory lock, the rename should ALSO have failed.
Needless to say that it is not a disk space problem either.
I resolved the problem temporarily by using the following strategy:
1. Using "Save as" to save it to a completely different directory.
2. Copying the file back (on the command line)
3. Closing the Buffer in Geany
4. Reopening it
I then checked with my remaining open files in Geany. Modifying the buffer and saving, caused the same error with two of the files, while it worked fine with two others. One of the two where the error occured too, belonged to a different directory, while all the others - including those which could be saved - belonged to the same directory as the file where the problem occured initially.
I don't see yet in what respect the two files which did not have the problem, differed significantly from the two files where the problem occured.
Closing Geany, starting it, and I can continue editing like normal, but my feeling is that it will be only a question of time until the problem occurs again. Is there anything I can do to help the Geany developers to nail down the cause of this strange problem?
--
You are receiving this because you are subscribed to this thread.
Reply to this email directly or view it on GitHub:
https://github.com/geany/geany/issues/1500
Given that Markdown has lots of undefined semantics, this may very well be a valid interpretation of certain broken Markdown documents. But I guess most would agree that the priority should be the other way around.
Example: (Save as `something.md` and open with Geany)
_This is "underlined"
```
should_be code
```
This sentence is considered code, because the
"matching" underscores had priority (?)
Note that the "stray underline" can also occur in HTML inline-comments, where they don't stand for underlining anyway.
<!-- Like this one. I know very well that this won't usually appear. -->
--
You are receiving this because you are subscribed to this thread.
Reply to this email directly or view it on GitHub:
https://github.com/geany/geany/issues/1439