SF.net SVN: geany-plugins: [6] trunk
mcginleyr1 at users.sourceforge.net
mcginleyr1 at xxxxx
Mon May 12 23:26:25 UTC 2008
Revision: 6
http://geany-plugins.svn.sourceforge.net/geany-plugins/?rev=6&view=rev
Author: mcginleyr1
Date: 2008-05-12 16:26:24 -0700 (Mon, 12 May 2008)
Log Message:
-----------
2008-05-12 Robert McGinley <mcginleyr1(at)gmail(dot)com>
* *: Initial import of plugin
Added Paths:
-----------
trunk/filetree/
trunk/filetree/AUTHORS
trunk/filetree/COPYING
trunk/filetree/ChangeLog
trunk/filetree/INSTALL
trunk/filetree/NEWS
trunk/filetree/README
trunk/filetree/po/
trunk/filetree/po/ChangeLog
trunk/filetree/po/LINGUAS
trunk/filetree/po/POTFILES
trunk/filetree/po/POTFILES.in
trunk/filetree/po/POTFILES.skip
trunk/filetree/po/stamp-it
trunk/filetree/src/
trunk/filetree/src/filetree.c
Added: trunk/filetree/AUTHORS
===================================================================
--- trunk/filetree/AUTHORS (rev 0)
+++ trunk/filetree/AUTHORS 2008-05-12 23:26:24 UTC (rev 6)
@@ -0,0 +1 @@
+Robert McGinley <mcginleyr1(at)gmail(dot)com>
Property changes on: trunk/filetree/AUTHORS
___________________________________________________________________
Name: svn:executable
+ *
Added: trunk/filetree/COPYING
===================================================================
--- trunk/filetree/COPYING (rev 0)
+++ trunk/filetree/COPYING 2008-05-12 23:26:24 UTC (rev 6)
@@ -0,0 +1,340 @@
+ GNU GENERAL PUBLIC LICENSE
+ Version 2, June 1991
+
+ Copyright (C) 1989, 1991 Free Software Foundation, Inc.
+ 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+ Preamble
+
+ The licenses for most software are designed to take away your
+freedom to share and change it. By contrast, the GNU General Public
+License is intended to guarantee your freedom to share and change free
+software--to make sure the software is free for all its users. This
+General Public License applies to most of the Free Software
+Foundation's software and to any other program whose authors commit to
+using it. (Some other Free Software Foundation software is covered by
+the GNU Library General Public License instead.) You can apply it to
+your programs, too.
+
+ When we speak of free software, we are referring to freedom, not
+price. Our General Public Licenses are designed to make sure that you
+have the freedom to distribute copies of free software (and charge for
+this service if you wish), that you receive source code or can get it
+if you want it, that you can change the software or use pieces of it
+in new free programs; and that you know you can do these things.
+
+ To protect your rights, we need to make restrictions that forbid
+anyone to deny you these rights or to ask you to surrender the rights.
+These restrictions translate to certain responsibilities for you if you
+distribute copies of the software, or if you modify it.
+
+ For example, if you distribute copies of such a program, whether
+gratis or for a fee, you must give the recipients all the rights that
+you have. You must make sure that they, too, receive or can get the
+source code. And you must show them these terms so they know their
+rights.
+
+ We protect your rights with two steps: (1) copyright the software, and
+(2) offer you this license which gives you legal permission to copy,
+distribute and/or modify the software.
+
+ Also, for each author's protection and ours, we want to make certain
+that everyone understands that there is no warranty for this free
+software. If the software is modified by someone else and passed on, we
+want its recipients to know that what they have is not the original, so
+that any problems introduced by others will not reflect on the original
+authors' reputations.
+
+ Finally, any free program is threatened constantly by software
+patents. We wish to avoid the danger that redistributors of a free
+program will individually obtain patent licenses, in effect making the
+program proprietary. To prevent this, we have made it clear that any
+patent must be licensed for everyone's free use or not licensed at all.
+
+ The precise terms and conditions for copying, distribution and
+modification follow.
+
+ GNU GENERAL PUBLIC LICENSE
+ TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
+
+ 0. This License applies to any program or other work which contains
+a notice placed by the copyright holder saying it may be distributed
+under the terms of this General Public License. The "Program", below,
+refers to any such program or work, and a "work based on the Program"
+means either the Program or any derivative work under copyright law:
+that is to say, a work containing the Program or a portion of it,
+either verbatim or with modifications and/or translated into another
+language. (Hereinafter, translation is included without limitation in
+the term "modification".) Each licensee is addressed as "you".
+
+Activities other than copying, distribution and modification are not
+covered by this License; they are outside its scope. The act of
+running the Program is not restricted, and the output from the Program
+is covered only if its contents constitute a work based on the
+Program (independent of having been made by running the Program).
+Whether that is true depends on what the Program does.
+
+ 1. You may copy and distribute verbatim copies of the Program's
+source code as you receive it, in any medium, provided that you
+conspicuously and appropriately publish on each copy an appropriate
+copyright notice and disclaimer of warranty; keep intact all the
+notices that refer to this License and to the absence of any warranty;
+and give any other recipients of the Program a copy of this License
+along with the Program.
+
+You may charge a fee for the physical act of transferring a copy, and
+you may at your option offer warranty protection in exchange for a fee.
+
+ 2. You may modify your copy or copies of the Program or any portion
+of it, thus forming a work based on the Program, and copy and
+distribute such modifications or work under the terms of Section 1
+above, provided that you also meet all of these conditions:
+
+ a) You must cause the modified files to carry prominent notices
+ stating that you changed the files and the date of any change.
+
+ b) You must cause any work that you distribute or publish, that in
+ whole or in part contains or is derived from the Program or any
+ part thereof, to be licensed as a whole at no charge to all third
+ parties under the terms of this License.
+
+ c) If the modified program normally reads commands interactively
+ when run, you must cause it, when started running for such
+ interactive use in the most ordinary way, to print or display an
+ announcement including an appropriate copyright notice and a
+ notice that there is no warranty (or else, saying that you provide
+ a warranty) and that users may redistribute the program under
+ these conditions, and telling the user how to view a copy of this
+ License. (Exception: if the Program itself is interactive but
+ does not normally print such an announcement, your work based on
+ the Program is not required to print an announcement.)
+
+These requirements apply to the modified work as a whole. If
+identifiable sections of that work are not derived from the Program,
+and can be reasonably considered independent and separate works in
+themselves, then this License, and its terms, do not apply to those
+sections when you distribute them as separate works. But when you
+distribute the same sections as part of a whole which is a work based
+on the Program, the distribution of the whole must be on the terms of
+this License, whose permissions for other licensees extend to the
+entire whole, and thus to each and every part regardless of who wrote it.
+
+Thus, it is not the intent of this section to claim rights or contest
+your rights to work written entirely by you; rather, the intent is to
+exercise the right to control the distribution of derivative or
+collective works based on the Program.
+
+In addition, mere aggregation of another work not based on the Program
+with the Program (or with a work based on the Program) on a volume of
+a storage or distribution medium does not bring the other work under
+the scope of this License.
+
+ 3. You may copy and distribute the Program (or a work based on it,
+under Section 2) in object code or executable form under the terms of
+Sections 1 and 2 above provided that you also do one of the following:
+
+ a) Accompany it with the complete corresponding machine-readable
+ source code, which must be distributed under the terms of Sections
+ 1 and 2 above on a medium customarily used for software interchange; or,
+
+ b) Accompany it with a written offer, valid for at least three
+ years, to give any third party, for a charge no more than your
+ cost of physically performing source distribution, a complete
+ machine-readable copy of the corresponding source code, to be
+ distributed under the terms of Sections 1 and 2 above on a medium
+ customarily used for software interchange; or,
+
+ c) Accompany it with the information you received as to the offer
+ to distribute corresponding source code. (This alternative is
+ allowed only for noncommercial distribution and only if you
+ received the program in object code or executable form with such
+ an offer, in accord with Subsection b above.)
+
+The source code for a work means the preferred form of the work for
+making modifications to it. For an executable work, complete source
+code means all the source code for all modules it contains, plus any
+associated interface definition files, plus the scripts used to
+control compilation and installation of the executable. However, as a
+special exception, the source code distributed need not include
+anything that is normally distributed (in either source or binary
+form) with the major components (compiler, kernel, and so on) of the
+operating system on which the executable runs, unless that component
+itself accompanies the executable.
+
+If distribution of executable or object code is made by offering
+access to copy from a designated place, then offering equivalent
+access to copy the source code from the same place counts as
+distribution of the source code, even though third parties are not
+compelled to copy the source along with the object code.
+
+ 4. You may not copy, modify, sublicense, or distribute the Program
+except as expressly provided under this License. Any attempt
+otherwise to copy, modify, sublicense or distribute the Program is
+void, and will automatically terminate your rights under this License.
+However, parties who have received copies, or rights, from you under
+this License will not have their licenses terminated so long as such
+parties remain in full compliance.
+
+ 5. You are not required to accept this License, since you have not
+signed it. However, nothing else grants you permission to modify or
+distribute the Program or its derivative works. These actions are
+prohibited by law if you do not accept this License. Therefore, by
+modifying or distributing the Program (or any work based on the
+Program), you indicate your acceptance of this License to do so, and
+all its terms and conditions for copying, distributing or modifying
+the Program or works based on it.
+
+ 6. Each time you redistribute the Program (or any work based on the
+Program), the recipient automatically receives a license from the
+original licensor to copy, distribute or modify the Program subject to
+these terms and conditions. You may not impose any further
+restrictions on the recipients' exercise of the rights granted herein.
+You are not responsible for enforcing compliance by third parties to
+this License.
+
+ 7. If, as a consequence of a court judgment or allegation of patent
+infringement or for any other reason (not limited to patent issues),
+conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License. If you cannot
+distribute so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you
+may not distribute the Program at all. For example, if a patent
+license would not permit royalty-free redistribution of the Program by
+all those who receive copies directly or indirectly through you, then
+the only way you could satisfy both it and this License would be to
+refrain entirely from distribution of the Program.
+
+If any portion of this section is held invalid or unenforceable under
+any particular circumstance, the balance of the section is intended to
+apply and the section as a whole is intended to apply in other
+circumstances.
+
+It is not the purpose of this section to induce you to infringe any
+patents or other property right claims or to contest validity of any
+such claims; this section has the sole purpose of protecting the
+integrity of the free software distribution system, which is
+implemented by public license practices. Many people have made
+generous contributions to the wide range of software distributed
+through that system in reliance on consistent application of that
+system; it is up to the author/donor to decide if he or she is willing
+to distribute software through any other system and a licensee cannot
+impose that choice.
+
+This section is intended to make thoroughly clear what is believed to
+be a consequence of the rest of this License.
+
+ 8. If the distribution and/or use of the Program is restricted in
+certain countries either by patents or by copyrighted interfaces, the
+original copyright holder who places the Program under this License
+may add an explicit geographical distribution limitation excluding
+those countries, so that distribution is permitted only in or among
+countries not thus excluded. In such case, this License incorporates
+the limitation as if written in the body of this License.
+
+ 9. The Free Software Foundation may publish revised and/or new versions
+of the General Public License from time to time. Such new versions will
+be similar in spirit to the present version, but may differ in detail to
+address new problems or concerns.
+
+Each version is given a distinguishing version number. If the Program
+specifies a version number of this License which applies to it and "any
+later version", you have the option of following the terms and conditions
+either of that version or of any later version published by the Free
+Software Foundation. If the Program does not specify a version number of
+this License, you may choose any version ever published by the Free Software
+Foundation.
+
+ 10. If you wish to incorporate parts of the Program into other free
+programs whose distribution conditions are different, write to the author
+to ask for permission. For software which is copyrighted by the Free
+Software Foundation, write to the Free Software Foundation; we sometimes
+make exceptions for this. Our decision will be guided by the two goals
+of preserving the free status of all derivatives of our free software and
+of promoting the sharing and reuse of software generally.
+
+ NO WARRANTY
+
+ 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
+FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN
+OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
+PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS
+TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE
+PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
+REPAIR OR CORRECTION.
+
+ 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
+REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
+INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
+OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
+TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
+YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
+PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGES.
+
+ END OF TERMS AND CONDITIONS
+
+ How to Apply These Terms to Your New Programs
+
+ If you develop a new program, and you want it to be of the greatest
+possible use to the public, the best way to achieve this is to make it
+free software which everyone can redistribute and change under these terms.
+
+ To do so, attach the following notices to the program. It is safest
+to attach them to the start of each source file to most effectively
+convey the exclusion of warranty; and each file should have at least
+the "copyright" line and a pointer to where the full notice is found.
+
+ <one line to give the program's name and a brief idea of what it does.>
+ Copyright (C) <year> <name of author>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+
+
+Also add information on how to contact you by electronic and paper mail.
+
+If the program is interactive, make it output a short notice like this
+when it starts in an interactive mode:
+
+ Gnomovision version 69, Copyright (C) year name of author
+ Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
+ This is free software, and you are welcome to redistribute it
+ under certain conditions; type `show c' for details.
+
+The hypothetical commands `show w' and `show c' should show the appropriate
+parts of the General Public License. Of course, the commands you use may
+be called something other than `show w' and `show c'; they could even be
+mouse-clicks or menu items--whatever suits your program.
+
+You should also get your employer (if you work as a programmer) or your
+school, if any, to sign a "copyright disclaimer" for the program, if
+necessary. Here is a sample; alter the names:
+
+ Yoyodyne, Inc., hereby disclaims all copyright interest in the program
+ `Gnomovision' (which makes passes at compilers) written by James Hacker.
+
+ <signature of Ty Coon>, 1 April 1989
+ Ty Coon, President of Vice
+
+This General Public License does not permit incorporating your program into
+proprietary programs. If your program is a subroutine library, you may
+consider it more useful to permit linking proprietary applications with the
+library. If this is what you want to do, use the GNU Library General
+Public License instead of this License.
Property changes on: trunk/filetree/COPYING
___________________________________________________________________
Name: svn:executable
+ *
Added: trunk/filetree/ChangeLog
===================================================================
Property changes on: trunk/filetree/ChangeLog
___________________________________________________________________
Name: svn:executable
+ *
Added: trunk/filetree/INSTALL
===================================================================
--- trunk/filetree/INSTALL (rev 0)
+++ trunk/filetree/INSTALL 2008-05-12 23:26:24 UTC (rev 6)
@@ -0,0 +1,182 @@
+Basic Installation
+==================
+
+ These are generic installation instructions.
+
+ The `configure' shell script attempts to guess correct values for
+various system-dependent variables used during compilation. It uses
+those values to create a `Makefile' in each directory of the package.
+It may also create one or more `.h' files containing system-dependent
+definitions. Finally, it creates a shell script `config.status' that
+you can run in the future to recreate the current configuration, a file
+`config.cache' that saves the results of its tests to speed up
+reconfiguring, and a file `config.log' containing compiler output
+(useful mainly for debugging `configure').
+
+ If you need to do unusual things to compile the package, please try
+to figure out how `configure' could check whether to do them, and mail
+diffs or instructions to the address given in the `README' so they can
+be considered for the next release. If at some point `config.cache'
+contains results you don't want to keep, you may remove or edit it.
+
+ The file `configure.in' is used to create `configure' by a program
+called `autoconf'. You only need `configure.in' if you want to change
+it or regenerate `configure' using a newer version of `autoconf'.
+
+The simplest way to compile this package is:
+
+ 1. `cd' to the directory containing the package's source code and type
+ `./configure' to configure the package for your system. If you're
+ using `csh' on an old version of System V, you might need to type
+ `sh ./configure' instead to prevent `csh' from trying to execute
+ `configure' itself.
+
+ Running `configure' takes awhile. While running, it prints some
+ messages telling which features it is checking for.
+
+ 2. Type `make' to compile the package.
+
+ 3. Optionally, type `make check' to run any self-tests that come with
+ the package.
+
+ 4. Type `make install' to install the programs and any data files and
+ documentation.
+
+ 5. You can remove the program binaries and object files from the
+ source code directory by typing `make clean'. To also remove the
+ files that `configure' created (so you can compile the package for
+ a different kind of computer), type `make distclean'. There is
+ also a `make maintainer-clean' target, but that is intended mainly
+ for the package's developers. If you use it, you may have to get
+ all sorts of other programs in order to regenerate files that came
+ with the distribution.
+
+Compilers and Options
+=====================
+
+ Some systems require unusual options for compilation or linking that
+the `configure' script does not know about. You can give `configure'
+initial values for variables by setting them in the environment. Using
+a Bourne-compatible shell, you can do that on the command line like
+this:
+ CC=c89 CFLAGS=-O2 LIBS=-lposix ./configure
+
+Or on systems that have the `env' program, you can do it like this:
+ env CPPFLAGS=-I/usr/local/include LDFLAGS=-s ./configure
+
+Compiling For Multiple Architectures
+====================================
+
+ You can compile the package for more than one kind of computer at the
+same time, by placing the object files for each architecture in their
+own directory. To do this, you must use a version of `make' that
+supports the `VPATH' variable, such as GNU `make'. `cd' to the
+directory where you want the object files and executables to go and run
+the `configure' script. `configure' automatically checks for the
+source code in the directory that `configure' is in and in `..'.
+
+ If you have to use a `make' that does not supports the `VPATH'
+variable, you have to compile the package for one architecture at a time
+in the source code directory. After you have installed the package for
+one architecture, use `make distclean' before reconfiguring for another
+architecture.
+
+Installation Names
+==================
+
+ By default, `make install' will install the package's files in
+`/usr/local/bin', `/usr/local/man', etc. You can specify an
+installation prefix other than `/usr/local' by giving `configure' the
+option `--prefix=PATH'.
+
+ You can specify separate installation prefixes for
+architecture-specific files and architecture-independent files. If you
+give `configure' the option `--exec-prefix=PATH', the package will use
+PATH as the prefix for installing programs and libraries.
+Documentation and other data files will still use the regular prefix.
+
+ In addition, if you use an unusual directory layout you can give
+options like `--bindir=PATH' to specify different values for particular
+kinds of files. Run `configure --help' for a list of the directories
+you can set and what kinds of files go in them.
+
+ If the package supports it, you can cause programs to be installed
+with an extra prefix or suffix on their names by giving `configure' the
+option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
+
+Optional Features
+=================
+
+ Some packages pay attention to `--enable-FEATURE' options to
+`configure', where FEATURE indicates an optional part of the package.
+They may also pay attention to `--with-PACKAGE' options, where PACKAGE
+is something like `gnu-as' or `x' (for the X Window System). The
+`README' should mention any `--enable-' and `--with-' options that the
+package recognizes.
+
+ For packages that use the X Window System, `configure' can usually
+find the X include and library files automatically, but if it doesn't,
+you can use the `configure' options `--x-includes=DIR' and
+`--x-libraries=DIR' to specify their locations.
+
+Specifying the System Type
+==========================
+
+ There may be some features `configure' can not figure out
+automatically, but needs to determine by the type of host the package
+will run on. Usually `configure' can figure that out, but if it prints
+a message saying it can not guess the host type, give it the
+`--host=TYPE' option. TYPE can either be a short name for the system
+type, such as `sun4', or a canonical name with three fields:
+ CPU-COMPANY-SYSTEM
+
+See the file `config.sub' for the possible values of each field. If
+`config.sub' isn't included in this package, then this package doesn't
+need to know the host type.
+
+ If you are building compiler tools for cross-compiling, you can also
+use the `--target=TYPE' option to select the type of system they will
+produce code for and the `--build=TYPE' option to select the type of
+system on which you are compiling the package.
+
+Sharing Defaults
+================
+
+ If you want to set default values for `configure' scripts to share,
+you can create a site shell script called `config.site' that gives
+default values for variables like `CC', `cache_file', and `prefix'.
+`configure' looks for `PREFIX/share/config.site' if it exists, then
+`PREFIX/etc/config.site' if it exists. Or, you can set the
+`CONFIG_SITE' environment variable to the location of the site script.
+A warning: not all `configure' scripts look for a site script.
+
+Operation Controls
+==================
+
+ `configure' recognizes the following options to control how it
+operates.
+
+`--cache-file=FILE'
+ Use and save the results of the tests in FILE instead of
+ `./config.cache'. Set FILE to `/dev/null' to disable caching, for
+ debugging `configure'.
+
+`--help'
+ Print a summary of the options to `configure', and exit.
+
+`--quiet'
+`--silent'
+`-q'
+ Do not print messages saying which checks are being made. To
+ suppress all normal output, redirect it to `/dev/null' (any error
+ messages will still be shown).
+
+`--srcdir=DIR'
+ Look for the package's source code in directory DIR. Usually
+ `configure' can determine that directory automatically.
+
+`--version'
+ Print the version of Autoconf used to generate the `configure'
+ script, and exit.
+
+`configure' also accepts some other, not widely useful, options.
Property changes on: trunk/filetree/INSTALL
___________________________________________________________________
Name: svn:executable
+ *
Added: trunk/filetree/NEWS
===================================================================
Property changes on: trunk/filetree/NEWS
___________________________________________________________________
Name: svn:executable
+ *
Added: trunk/filetree/README
===================================================================
--- trunk/filetree/README (rev 0)
+++ trunk/filetree/README 2008-05-12 23:26:24 UTC (rev 6)
@@ -0,0 +1,58 @@
+Filetree Plugin
+------------------
+
+
+About
+-----
+Based off the filebrowser plugin. Allows for file system tree structure instead of
+only seeing current directories.
+
+Requirements
+------------
+For compiling the plugin yourself, you will need the GTK (>= 2.6.0) libraries
+and header files. You will also need its dependency libraries and header
+files, such as Pango, Glib and ATK. All these files are available at
+http://www.gtk.org.
+
+And obviously, you will need have Geany installed. If you have Geany installed
+from the sources, you should be ready to go.
+If you used a preprared package e.g. from your distribution you probably need
+to install an additional package, this might be called geany-dev or geany-devel.
+
+Furthermore you need, of course, a C compiler and the Make tool.
+The GNU versions of these tools are recommended.
+
+
+Installation
+------------
+Compiling and installing the code is done by the following three commands:
+$ ./configure
+$ make
+$ make install
+
+For more configuration details run
+$ ./configure --help
+
+If there are any errors during compilation, check your build environment
+and try to find the error, otherwise contact one of the authors.
+
+
+Usage
+-----
+After installed successfully, load the plugin in Geany's plugin manager
+and after this every file is copied into a configurable directory when it
+is saved in Geany.
+
+
+License
+-------
+copyonsave is distributed under the terms of the GNU General Public License
+as published by the Free Software Foundation; either version 2 of the
+License, or (at your option) any later version. A copy of this license
+can be found in the file COPYING included with the source code of this
+program.
+
+
+Ideas, questions, patches and bug reports
+-----------------------------------------
+Send it to me at mcginleyr1(at)gmail(dot)com
Property changes on: trunk/filetree/README
___________________________________________________________________
Name: svn:executable
+ *
Added: trunk/filetree/po/ChangeLog
===================================================================
Property changes on: trunk/filetree/po/ChangeLog
___________________________________________________________________
Name: svn:executable
+ *
Added: trunk/filetree/po/LINGUAS
===================================================================
--- trunk/filetree/po/LINGUAS (rev 0)
+++ trunk/filetree/po/LINGUAS 2008-05-12 23:26:24 UTC (rev 6)
@@ -0,0 +1,2 @@
+# set of available languages (in alphabetic order)
+
Property changes on: trunk/filetree/po/LINGUAS
___________________________________________________________________
Name: svn:executable
+ *
Added: trunk/filetree/po/POTFILES
===================================================================
--- trunk/filetree/po/POTFILES (rev 0)
+++ trunk/filetree/po/POTFILES 2008-05-12 23:26:24 UTC (rev 6)
@@ -0,0 +1 @@
+ ../src/filetree.c
Property changes on: trunk/filetree/po/POTFILES
___________________________________________________________________
Name: svn:executable
+ *
Added: trunk/filetree/po/POTFILES.in
===================================================================
--- trunk/filetree/po/POTFILES.in (rev 0)
+++ trunk/filetree/po/POTFILES.in 2008-05-12 23:26:24 UTC (rev 6)
@@ -0,0 +1,3 @@
+# List of source files containing translatable strings.
+
+src/filetree.c
Property changes on: trunk/filetree/po/POTFILES.in
___________________________________________________________________
Name: svn:executable
+ *
Added: trunk/filetree/po/POTFILES.skip
===================================================================
--- trunk/filetree/po/POTFILES.skip (rev 0)
+++ trunk/filetree/po/POTFILES.skip 2008-05-12 23:26:24 UTC (rev 6)
@@ -0,0 +1 @@
+# List of source files containing translatable strings but should be ignored.
Property changes on: trunk/filetree/po/POTFILES.skip
___________________________________________________________________
Name: svn:executable
+ *
Added: trunk/filetree/po/stamp-it
===================================================================
Property changes on: trunk/filetree/po/stamp-it
___________________________________________________________________
Name: svn:executable
+ *
Added: trunk/filetree/src/filetree.c
===================================================================
--- trunk/filetree/src/filetree.c (rev 0)
+++ trunk/filetree/src/filetree.c 2008-05-12 23:26:24 UTC (rev 6)
@@ -0,0 +1,884 @@
+/*
+ * filetree.c
+ *
+ * Robert McGinley - mcginleyr1(at)gmail(dot)com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ *
+ */
+
+
+/* Sidebar file tree plugin. */
+
+#include "geany.h"
+
+#include <gdk/gdkkeysyms.h>
+
+#include "support.h"
+#include "prefs.h"
+#include "document.h"
+#include "utils.h"
+#include "keybindings.h"
+#include "project.h"
+
+#include "plugindata.h"
+#include "pluginmacros.h"
+
+
+PluginFields *plugin_fields;
+GeanyData *geany_data;
+
+
+PLUGIN_VERSION_CHECK(26)
+
+PLUGIN_INFO(_("File Tree"), _("Adds a file tree tab to the sidebar."), VERSION,
+ _("The Geany developer team"))
+
+
+/* Keybinding(s) */
+enum
+{
+ KB_FOCUS_FILE_LIST,
+ KB_COUNT
+};
+
+PLUGIN_KEY_GROUP(file_tree, KB_COUNT)
+
+
+/* number of characters to skip the root of an absolute path("c:" or "d:" on Windows) */
+#ifdef G_OS_WIN32
+# define ROOT_OFFSET 2
+#else
+# define ROOT_OFFSET 0
+#endif
+
+enum
+{
+ FILEVIEW_COLUMN_ICON = 0,
+ FILEVIEW_COLUMN_NAME,
+ FILEVIEW_N_COLUMNS
+};
+
+static gboolean show_hidden_files = FALSE;
+static gboolean hide_object_files = TRUE;
+
+
+static GtkWidget *file_view_vbox;
+static GtkWidget *file_view;
+static GtkListStore *file_store;
+static GtkTreeIter *last_dir_iter = NULL;
+static GtkEntryCompletion *entry_completion = NULL;
+
+static gchar *open_cmd; /* in locale-encoding */
+static gchar *config_file;
+
+static struct
+{
+ GtkWidget *open;
+ GtkWidget *open_external;
+ GtkWidget *find_in_files;
+} popup_items;
+
+/* Returns: whether name should be hidden. */
+static gboolean check_hidden(const gchar *base_name)
+{
+ gsize len;
+
+ if (! NZV(base_name))
+ return FALSE;
+
+ if (base_name[0] == '.')
+ return TRUE;
+
+ len = strlen(base_name);
+ if (base_name[len - 1] == '~')
+ return TRUE;
+
+ if (hide_object_files)
+ {
+ const gchar *exts[] = {".o", ".obj", ".so", ".dll", ".a", ".lib"};
+ guint i;
+
+ for (i = 0; i < G_N_ELEMENTS(exts); i++)
+ {
+ const gchar *ext = exts[i];
+
+ if (p_utils->str_equal(&base_name[len - strlen(ext)], ext))
+ return TRUE;
+ }
+ }
+ return FALSE;
+}
+
+
+/* name is in locale encoding */
+static void add_item(const gchar *name)
+{
+ GtkTreeIter iter;
+ gchar *fname, *utf8_name;
+ gboolean dir;
+
+ if (! show_hidden_files && check_hidden(name))
+ return;
+
+ fname = g_strconcat(current_dir, G_DIR_SEPARATOR_S, name, NULL);
+ dir = g_file_test(fname, G_FILE_TEST_IS_DIR);
+ g_free(fname);
+
+ if (dir)
+ {
+ if (last_dir_iter == NULL)
+ gtk_list_store_prepend(file_store, &iter);
+ else
+ {
+ gtk_list_store_insert_after(file_store, &iter, last_dir_iter);
+ gtk_tree_iter_free(last_dir_iter);
+ }
+ last_dir_iter = gtk_tree_iter_copy(&iter);
+ }
+ else
+ gtk_list_store_append(file_store, &iter);
+
+ utf8_name = p_utils->get_utf8_from_locale(name);
+
+ gtk_list_store_set(file_store, &iter,
+ FILEVIEW_COLUMN_ICON, (dir) ? GTK_STOCK_DIRECTORY : GTK_STOCK_FILE,
+ FILEVIEW_COLUMN_NAME, utf8_name, -1);
+ g_free(utf8_name);
+}
+
+
+static void clear(void)
+{
+ gtk_list_store_clear(file_store);
+
+ /* reset the directory item pointer */
+ if (last_dir_iter != NULL)
+ gtk_tree_iter_free(last_dir_iter);
+ last_dir_iter = NULL;
+}
+
+
+/* recreate the tree model from current_dir. */
+static void refresh(void)
+{
+ gchar *utf8_dir;
+ GSList *list;
+
+ /* don't clear when the new path doesn't exist */
+ if (! g_file_test(current_dir, G_FILE_TEST_EXISTS))
+ return;
+
+ clear();
+
+
+ list = p_utils->get_file_list(current_dir, NULL, NULL);
+ if (list != NULL)
+ {
+ add_top_level_entry();
+ g_slist_foreach(list, (GFunc) add_item, NULL);
+ g_slist_foreach(list, (GFunc) g_free, NULL);
+ g_slist_free(list);
+ }
+ gtk_entry_completion_set_model(entry_completion, GTK_TREE_MODEL(file_store));
+}
+
+
+static void on_expand_all(void)
+{
+
+}
+
+static void on_collapse_all(void)
+{
+
+}
+
+
+static gchar *get_default_dir(void)
+{
+ const gchar *dir = NULL;
+
+ if (project)
+ dir = project->base_path;
+ if (NZV(dir))
+ return p_utils->get_locale_from_utf8(dir);
+
+ return g_get_current_dir();
+}
+
+
+static void on_current_path(void)
+{
+ gchar *fname;
+ gchar *dir;
+ gint idx = p_document->get_cur_idx();
+
+ if (! DOC_IDX_VALID(idx) || doc_list[idx].file_name == NULL ||
+ ! g_path_is_absolute(doc_list[idx].file_name))
+ {
+ setptr(current_dir, get_default_dir());
+ refresh();
+ return;
+ }
+ fname = doc_list[idx].file_name;
+ fname = p_utils->get_locale_from_utf8(fname);
+ dir = g_path_get_dirname(fname);
+ g_free(fname);
+
+ setptr(current_dir, dir);
+ refresh();
+}
+
+
+static gboolean check_single_selection(GtkTreeSelection *treesel)
+{
+ if (gtk_tree_selection_count_selected_rows(treesel) == 1)
+ return TRUE;
+
+ p_ui->set_statusbar(FALSE, _("Too many items selected!"));
+ return FALSE;
+}
+
+
+/* Returns: TRUE if at least one of selected_items is a folder. */
+static gboolean is_folder_selected(GList *selected_items)
+{
+ GList *item;
+ GtkTreeModel *model = GTK_TREE_MODEL(file_store);
+ gboolean dir_found = FALSE;
+
+ for (item = selected_items; item != NULL; item = g_list_next(item))
+ {
+ gchar *icon;
+ GtkTreeIter iter;
+ GtkTreePath *treepath;
+
+ treepath = (GtkTreePath*) item->data;
+ gtk_tree_model_get_iter(model, &iter, treepath);
+ gtk_tree_model_get(model, &iter, FILEVIEW_COLUMN_ICON, &icon, -1);
+
+ if (p_utils->str_equal(icon, GTK_STOCK_DIRECTORY))
+ {
+ dir_found = TRUE;
+ g_free(icon);
+ break;
+ }
+ g_free(icon);
+ }
+ return dir_found;
+}
+
+
+/* Returns: the full filename in locale encoding. */
+static gchar *get_tree_path_filename(GtkTreePath *treepath)
+{
+ GtkTreeModel *model = GTK_TREE_MODEL(file_store);
+ GtkTreeIter iter;
+ gchar *name, *fname;
+
+ gtk_tree_model_get_iter(model, &iter, treepath);
+ gtk_tree_model_get(model, &iter, FILEVIEW_COLUMN_NAME, &name, -1);
+
+ if (p_utils->str_equal(name, ".."))
+ {
+ fname = g_path_get_dirname(current_dir);
+ }
+ else
+ {
+ setptr(name, p_utils->get_locale_from_utf8(name));
+ fname = g_build_filename(current_dir, name, NULL);
+ }
+ g_free(name);
+
+ return fname;
+}
+
+
+static void open_external(const gchar *fname, gboolean dir_found)
+{
+ gchar *cmd;
+ gchar *locale_cmd;
+ gchar *dir;
+ GString *cmd_str = g_string_new(open_cmd);
+ GError *error = NULL;
+
+ if (! dir_found)
+ dir = g_path_get_dirname(fname);
+ else
+ dir = g_strdup(fname);
+
+ p_utils->string_replace_all(cmd_str, "%f", fname);
+ p_utils->string_replace_all(cmd_str, "%d", dir);
+
+ cmd = g_string_free(cmd_str, FALSE);
+ locale_cmd = p_utils->get_locale_from_utf8(cmd);
+ if (! g_spawn_command_line_async(locale_cmd, &error))
+ {
+ gchar *c = strchr(cmd, ' ');
+
+ if (c != NULL)
+ *c = '\0';
+ p_ui->set_statusbar(TRUE,
+ _("Could not execute configured external command '%s' (%s)."),
+ cmd, error->message);
+ g_error_free(error);
+ }
+ g_free(locale_cmd);
+ g_free(cmd);
+ g_free(dir);
+}
+
+
+static void on_external_open(GtkMenuItem *menuitem, gpointer user_data)
+{
+ GtkTreeSelection *treesel;
+ GtkTreeModel *model;
+ GList *list;
+ gboolean dir_found;
+
+ treesel = gtk_tree_view_get_selection(GTK_TREE_VIEW(file_view));
+
+ list = gtk_tree_selection_get_selected_rows(treesel, &model);
+ dir_found = is_folder_selected(list);
+
+ if (! dir_found || check_single_selection(treesel))
+ {
+ GList *item;
+
+ for (item = list; item != NULL; item = g_list_next(item))
+ {
+ GtkTreePath *treepath = item->data;
+ gchar *fname = get_tree_path_filename(treepath);
+
+ open_external(fname, dir_found);
+ g_free(fname);
+ }
+ }
+
+ g_list_foreach(list, (GFunc) gtk_tree_path_free, NULL);
+ g_list_free(list);
+}
+
+
+/* We use p_document->open_files() as it's more efficient. */
+static void open_selected_files(GList *list)
+{
+ GSList *files = NULL;
+ GList *item;
+
+ for (item = list; item != NULL; item = g_list_next(item))
+ {
+ GtkTreePath *treepath = item->data;
+ gchar *fname = get_tree_path_filename(treepath);
+
+ files = g_slist_append(files, fname);
+ }
+ p_document->open_files(files, FALSE, NULL, NULL);
+ g_slist_foreach(files, (GFunc) g_free, NULL); /* free filenames */
+ g_slist_free(files);
+}
+
+
+static void open_folder(GtkTreePath *treepath)
+{
+ gchar *fname = get_tree_path_filename(treepath);
+
+ setptr(current_dir, fname);
+ refresh();
+}
+
+
+static void on_open_clicked(GtkMenuItem *menuitem, gpointer user_data)
+{
+ GtkTreeSelection *treesel;
+ GtkTreeModel *model;
+ GList *list;
+ gboolean dir_found;
+
+ treesel = gtk_tree_view_get_selection(GTK_TREE_VIEW(file_view));
+
+ list = gtk_tree_selection_get_selected_rows(treesel, &model);
+ dir_found = is_folder_selected(list);
+
+ if (dir_found)
+ {
+ if (check_single_selection(treesel))
+ {
+ GtkTreePath *treepath = list->data; /* first selected item */
+
+ expand_folder(treepath);
+ }
+ }
+ else
+ open_selected_files(list);
+
+ g_list_foreach(list, (GFunc) gtk_tree_path_free, NULL);
+ g_list_free(list);
+}
+
+
+static void on_find_in_files(GtkMenuItem *menuitem, gpointer user_data)
+{
+ GtkTreeSelection *treesel;
+ GtkTreeModel *model;
+ GList *list;
+ gchar *dir;
+ gboolean is_dir = FALSE;
+
+ treesel = gtk_tree_view_get_selection(GTK_TREE_VIEW(file_view));
+ if (! check_single_selection(treesel))
+ return;
+
+ list = gtk_tree_selection_get_selected_rows(treesel, &model);
+ is_dir = is_folder_selected(list);
+
+ if (is_dir)
+ {
+ GtkTreePath *treepath = list->data; /* first selected item */
+
+ dir = get_tree_path_filename(treepath);
+ }
+ else
+ dir = g_strdup(current_dir);
+
+ g_list_foreach(list, (GFunc) gtk_tree_path_free, NULL);
+ g_list_free(list);
+
+ setptr(dir, p_utils->get_utf8_from_locale(dir));
+ p_search->show_find_in_files_dialog(dir);
+ g_free(dir);
+}
+
+
+static void on_hidden_files_clicked(GtkCheckMenuItem *item)
+{
+ show_hidden_files = gtk_check_menu_item_get_active(item);
+ refresh();
+}
+
+
+static void on_hide_sidebar(void)
+{
+ p_keybindings->send_command(GEANY_KEY_GROUP_VIEW, GEANY_KEYS_VIEW_SIDEBAR);
+}
+
+
+static GtkWidget *create_popup_menu(void)
+{
+ GtkWidget *item, *menu, *image;
+
+ menu = gtk_menu_new();
+
+ item = gtk_image_menu_item_new_from_stock(GTK_STOCK_OPEN, NULL);
+ gtk_widget_show(item);
+ gtk_container_add(GTK_CONTAINER(menu), item);
+ g_signal_connect((gpointer) item, "activate",
+ G_CALLBACK(on_open_clicked), NULL);
+ popup_items.open = item;
+
+ image = gtk_image_new_from_stock(GTK_STOCK_OPEN, GTK_ICON_SIZE_MENU);
+ gtk_widget_show(image);
+ item = gtk_image_menu_item_new_with_mnemonic(_("Open _externally"));
+ gtk_image_menu_item_set_image(GTK_IMAGE_MENU_ITEM(item), image);
+ gtk_widget_show(item);
+ gtk_container_add(GTK_CONTAINER(menu), item);
+ g_signal_connect((gpointer) item, "activate",
+ G_CALLBACK(on_external_open), NULL);
+ popup_items.open_external = item;
+
+// image = gtk_image_new_from_stock(GTK_STOCK_FIND, GTK_ICON_SIZE_MENU);
+// gtk_widget_show(image);
+// item = gtk_image_menu_item_new_with_mnemonic(_("_Find in Files"));
+// gtk_image_menu_item_set_image(GTK_IMAGE_MENU_ITEM(item), image);
+// gtk_widget_show(item);
+// gtk_container_add(GTK_CONTAINER(menu), item);
+// g_signal_connect((gpointer) item, "activate", G_CALLBACK(on_find_in_files), NULL);
+// popup_items.find_in_files = item;
+
+ item = gtk_separator_menu_item_new();
+ gtk_widget_show(item);
+ gtk_container_add(GTK_CONTAINER(menu), item);
+
+ item = gtk_check_menu_item_new_with_mnemonic(_("Show _Hidden Files"));
+ gtk_widget_show(item);
+ gtk_container_add(GTK_CONTAINER(menu), item);
+ g_signal_connect((gpointer) item, "activate", G_CALLBACK(on_hidden_files_clicked), NULL);
+
+ item = gtk_separator_menu_item_new();
+ gtk_widget_show(item);
+ gtk_container_add(GTK_CONTAINER(menu), item);
+
+ item = gtk_image_menu_item_new_with_mnemonic(_("H_ide Sidebar"));
+ gtk_image_menu_item_set_image(GTK_IMAGE_MENU_ITEM(item),
+ gtk_image_new_from_stock("gtk-close", GTK_ICON_SIZE_MENU));
+ gtk_widget_show(item);
+ gtk_container_add(GTK_CONTAINER(menu), item);
+ g_signal_connect((gpointer) item, "activate", G_CALLBACK(on_hide_sidebar), NULL);
+
+ return menu;
+}
+
+
+static gboolean on_button_press(GtkWidget *widget, GdkEventButton *event, gpointer user_data)
+{
+ if (event->button == 1 && event->type == GDK_2BUTTON_PRESS)
+ on_open_clicked(NULL, NULL);
+ return FALSE;
+}
+
+
+static void update_popup_menu(GtkWidget *popup_menu)
+{
+ GtkTreeSelection *treesel = gtk_tree_view_get_selection(GTK_TREE_VIEW(file_view));
+ gboolean have_sel = (gtk_tree_selection_count_selected_rows(treesel) > 0);
+ gboolean multi_sel = (gtk_tree_selection_count_selected_rows(treesel) > 1);
+
+ gtk_widget_set_sensitive(popup_items.open, have_sel);
+ gtk_widget_set_sensitive(popup_items.open_external, have_sel);
+ gtk_widget_set_sensitive(popup_items.find_in_files, have_sel && ! multi_sel);
+}
+
+
+/* delay updating popup menu until the selection has been set */
+static gboolean on_button_release(GtkWidget *widget, GdkEventButton *event, gpointer user_data)
+{
+ if (event->button == 3)
+ {
+ static GtkWidget *popup_menu = NULL;
+
+ if (popup_menu == NULL)
+ popup_menu = create_popup_menu();
+
+ update_popup_menu(popup_menu);
+
+ gtk_menu_popup(GTK_MENU(popup_menu), NULL, NULL, NULL, NULL,
+ event->button, event->time);
+ }
+ return FALSE;
+}
+
+
+static gboolean on_key_press(GtkWidget *widget, GdkEventKey *event, gpointer data)
+{
+ if (event->keyval == GDK_Return
+ || event->keyval == GDK_ISO_Enter
+ || event->keyval == GDK_KP_Enter
+ || event->keyval == GDK_space)
+ on_open_clicked(NULL, NULL);
+
+ if ((event->keyval == GDK_Up ||
+ event->keyval == GDK_KP_Up) &&
+ (event->state & GDK_MOD1_MASK)) /* FIXME: Alt-Up doesn't seem to work! */
+ on_go_up();
+ return FALSE;
+}
+
+
+
+static void prepare_file_view(void)
+{
+ GtkCellRenderer *text_renderer, *icon_renderer;
+ GtkTreeViewColumn *expandColumn *column;
+ GtkTreeSelection *select;
+ PangoFontDescription *pfd;
+
+ file_store = gtk_list_store_new(FILEVIEW_N_COLUMNS, G_TYPE_STRING, G_TYPE_STRING);
+
+ gtk_tree_view_set_model(GTK_TREE_VIEW(file_view), GTK_TREE_MODEL(file_store));
+
+ icon_renderer = gtk_cell_renderer_pixbuf_new();
+ text_renderer = gtk_cell_renderer_text_new();
+ column = gtk_tree_view_column_new();
+ gtk_tree_view_column_pack_start(column, icon_renderer, FALSE);
+ gtk_tree_view_column_set_attributes(column, icon_renderer, "stock-id", FILEVIEW_COLUMN_ICON, NULL);
+ gtk_tree_view_column_pack_start(column, text_renderer, TRUE);
+ gtk_tree_view_column_set_attributes(column, text_renderer, "text", FILEVIEW_COLUMN_NAME, NULL);
+ gtk_tree_view_append_column(GTK_TREE_VIEW(file_view), column);
+ gtk_tree_view_set_headers_visible(GTK_TREE_VIEW(file_view), FALSE);
+
+ gtk_tree_view_set_enable_search(GTK_TREE_VIEW(file_view), TRUE);
+ gtk_tree_view_set_search_column(GTK_TREE_VIEW(file_view), FILEVIEW_COLUMN_NAME);
+
+ pfd = pango_font_description_from_string(prefs->tagbar_font);
+ gtk_widget_modify_font(file_view, pfd);
+ pango_font_description_free(pfd);
+
+ /* selection handling */
+ select = gtk_tree_view_get_selection(GTK_TREE_VIEW(file_view));
+ gtk_tree_selection_set_mode(select, GTK_SELECTION_MULTIPLE);
+
+ g_signal_connect(G_OBJECT(file_view), "realize", G_CALLBACK(on_current_path), NULL);
+ g_signal_connect(G_OBJECT(file_view), "button-press-event",
+ G_CALLBACK(on_button_press), NULL);
+ g_signal_connect(G_OBJECT(file_view), "button-release-event",
+ G_CALLBACK(on_button_release), NULL);
+ g_signal_connect(G_OBJECT(file_view), "key-press-event",
+ G_CALLBACK(on_key_press), NULL);
+}
+
+
+static GtkWidget *make_toolbar(void)
+{
+ GtkWidget *wid, *toolbar;
+ GtkTooltips *tooltips = GTK_TOOLTIPS(p_support->lookup_widget(
+ app->window, "tooltips"));
+
+ toolbar = gtk_toolbar_new();
+ gtk_toolbar_set_icon_size(GTK_TOOLBAR(toolbar), GTK_ICON_SIZE_MENU);
+ gtk_toolbar_set_style(GTK_TOOLBAR(toolbar), GTK_TOOLBAR_ICONS);
+
+ wid = (GtkWidget *) gtk_tool_button_new_from_stock(GTK_STOCK_GO_DOWN);
+ gtk_tool_item_set_tooltip(GTK_TOOL_ITEM(wid), tooltips,
+ _("Expand All"), NULL);
+ g_signal_connect(G_OBJECT(wid), "clicked", G_CALLBACK(on_expand_all), NULL);
+ gtk_container_add(GTK_CONTAINER(toolbar), wid);
+
+ wid = (GtkWidget *) gtk_tool_button_new_from_stock(GTK_STOCK_GO_UP);
+ gtk_tool_item_set_tooltip(GTK_TOOL_ITEM(wid), tooltips,
+ _("Collapse All"), NULL);
+ g_signal_connect(G_OBJECT(wid), "clicked", G_CALLBACK(on_collapse_all), NULL);
+ gtk_container_add(GTK_CONTAINER(toolbar), wid);
+
+ return toolbar;
+}
+
+
+static gboolean completion_match_func(GtkEntryCompletion *completion, const gchar *key,
+ GtkTreeIter *iter, gpointer user_data)
+{
+ gchar *str, *icon;
+ gboolean result = FALSE;
+
+ gtk_tree_model_get(GTK_TREE_MODEL(file_store), iter,
+ FILEVIEW_COLUMN_ICON, &icon, FILEVIEW_COLUMN_NAME, &str, -1);
+
+ if (str != NULL && icon != NULL && p_utils->str_equal(icon, GTK_STOCK_DIRECTORY) &&
+ ! g_str_has_suffix(key, G_DIR_SEPARATOR_S))
+ {
+ /* key is something like "/tmp/te" and str is a filename like "test",
+ * so strip the path from key to make them comparable */
+ gchar *base_name = g_path_get_basename(key);
+ gchar *str_lowered = g_utf8_strdown(str, -1);
+ result = g_str_has_prefix(str_lowered, base_name);
+ g_free(base_name);
+ g_free(str_lowered);
+ }
+ g_free(str);
+ g_free(icon);
+
+ return result;
+}
+
+
+static gboolean completion_match_selected(GtkEntryCompletion *widget, GtkTreeModel *model,
+ GtkTreeIter *iter, gpointer user_data)
+{
+ gchar *str;
+ gtk_tree_model_get(model, iter, FILEVIEW_COLUMN_NAME, &str, -1);
+ if (str != NULL)
+ {
+
+ }
+ g_free(str);
+
+ return TRUE;
+}
+
+
+static void completion_create(void)
+{
+ entry_completion = gtk_entry_completion_new();
+
+ gtk_entry_completion_set_inline_completion(entry_completion, FALSE);
+ gtk_entry_completion_set_popup_completion(entry_completion, TRUE);
+ gtk_entry_completion_set_text_column(entry_completion, FILEVIEW_COLUMN_NAME);
+ gtk_entry_completion_set_match_func(entry_completion, completion_match_func, NULL, NULL);
+
+ g_signal_connect(entry_completion, "match-selected",
+ G_CALLBACK(completion_match_selected), NULL);
+
+}
+
+
+#define CHECK_READ_SETTING(var, error, tmp) \
+ if ((error) != NULL) \
+ { \
+ g_error_free((error)); \
+ (error) = NULL; \
+ } \
+ else \
+ (var) = (tmp);
+
+static void load_settings(void)
+{
+ GKeyFile *config = g_key_file_new();
+ GError *error = NULL;
+ gboolean tmp;
+
+ config_file = g_strconcat(app->configdir, G_DIR_SEPARATOR_S, "plugins", G_DIR_SEPARATOR_S,
+ "filetree", G_DIR_SEPARATOR_S, "filetree.conf", NULL);
+ g_key_file_load_from_file(config, config_file, G_KEY_FILE_NONE, NULL);
+ open_cmd = g_key_file_get_string(config, "filetree", "open_command", &error);
+ if (error != NULL)
+ {
+ open_cmd = g_strdup("nautilus \"%d\"");
+ g_error_free(error);
+ error = NULL;
+ }
+ tmp = g_key_file_get_boolean(config, "filetree", "show_hidden_files", &error);
+ CHECK_READ_SETTING(show_hidden_files, error, tmp);
+ tmp = g_key_file_get_boolean(config, "filetree", "hide_object_files", &error);
+ CHECK_READ_SETTING(hide_object_files, error, tmp);
+
+ g_key_file_free(config);
+}
+
+
+static void kb_activate(guint key_id)
+{
+ switch (key_id)
+ {
+ case KB_FOCUS_FILE_LIST:
+ gtk_widget_grab_focus(file_view);
+ break;
+ }
+}
+
+
+void init(GeanyData *data)
+{
+ GtkWidget *scrollwin, *toolbar;
+
+ file_view_vbox = gtk_vbox_new(FALSE, 0);
+ toolbar = make_toolbar();
+ gtk_box_pack_start(GTK_BOX(file_view_vbox), toolbar, FALSE, FALSE, 0);
+
+ file_view = gtk_tree_view_new();
+// prepare_file_view();
+ completion_create();
+
+ scrollwin = gtk_scrolled_window_new(NULL, NULL);
+ gtk_scrolled_window_set_policy(
+ GTK_SCROLLED_WINDOW(scrollwin),
+ GTK_POLICY_AUTOMATIC, GTK_POLICY_AUTOMATIC);
+ gtk_container_add(GTK_CONTAINER(scrollwin), file_view);
+ gtk_container_add(GTK_CONTAINER(file_view_vbox), scrollwin);
+
+ gtk_widget_show_all(file_view_vbox);
+ gtk_notebook_append_page(GTK_NOTEBOOK(app->treeview_notebook), file_view_vbox,
+ gtk_label_new(_("Files")));
+
+ load_settings();
+
+ /* setup keybindings */
+ p_keybindings->set_item(plugin_key_group, KB_FOCUS_FILE_LIST, kb_activate,
+ 0, 0, "focus_file_list", _("Focus File List"), NULL);
+}
+
+
+void configure(GtkWidget *parent)
+{
+ GtkWidget *dialog, *label, *entry, *checkbox_of, *checkbox_hf, *vbox;
+ GtkTooltips *tooltips = gtk_tooltips_new();
+
+ dialog = gtk_dialog_new_with_buttons(_("File Browser"),
+ GTK_WINDOW(parent), GTK_DIALOG_DESTROY_WITH_PARENT,
+ GTK_STOCK_CANCEL, GTK_RESPONSE_CANCEL, GTK_STOCK_OK, GTK_RESPONSE_ACCEPT, NULL);
+ vbox = p_ui->dialog_vbox_new(GTK_DIALOG(dialog));
+ gtk_widget_set_name(dialog, "GeanyDialog");
+ gtk_box_set_spacing(GTK_BOX(vbox), 6);
+
+ label = gtk_label_new(_("External open command:"));
+ gtk_misc_set_alignment(GTK_MISC(label), 0, 0.5);
+ gtk_container_add(GTK_CONTAINER(vbox), label);
+
+ entry = gtk_entry_new();
+ gtk_widget_show(entry);
+ if (open_cmd != NULL)
+ gtk_entry_set_text(GTK_ENTRY(entry), open_cmd);
+ gtk_tooltips_set_tip(tooltips, entry,
+ _("The command to execute when using \"Open with\". You can use %f and %d wildcards.\n"
+ "%f will be replaced with the filename including full path\n"
+ "%d will be replaced with the path name of the selected file without the filename"),
+ NULL);
+ gtk_container_add(GTK_CONTAINER(vbox), entry);
+
+ checkbox_hf = gtk_check_button_new_with_label(_("Show hidden files"));
+ gtk_button_set_focus_on_click(GTK_BUTTON(checkbox_hf), FALSE);
+ gtk_toggle_button_set_active(GTK_TOGGLE_BUTTON(checkbox_hf), show_hidden_files);
+ gtk_box_pack_start(GTK_BOX(vbox), checkbox_hf, FALSE, FALSE, 5);
+
+ checkbox_of = gtk_check_button_new_with_label(_("Hide object files"));
+ gtk_button_set_focus_on_click(GTK_BUTTON(checkbox_of), FALSE);
+ gtk_toggle_button_set_active(GTK_TOGGLE_BUTTON(checkbox_of), hide_object_files);
+ gtk_tooltips_set_tip(tooltips, checkbox_of,
+ _("Don't show generated object files in the file browser, this includes "
+ "*.o, *.obj. *.so, *.dll, *.a, *.lib"),
+ NULL);
+ gtk_box_pack_start(GTK_BOX(vbox), checkbox_of, FALSE, FALSE, 5);
+
+
+ gtk_widget_show_all(vbox);
+
+ /* run the dialog and check for the response code */
+ if (gtk_dialog_run(GTK_DIALOG(dialog)) == GTK_RESPONSE_ACCEPT)
+ {
+ GKeyFile *config = g_key_file_new();
+ gchar *data;
+ gchar *config_dir = g_path_get_dirname(config_file);
+
+ g_free(open_cmd);
+ open_cmd = g_strdup(gtk_entry_get_text(GTK_ENTRY(entry)));
+ show_hidden_files = gtk_toggle_button_get_active(GTK_TOGGLE_BUTTON(checkbox_hf));
+ hide_object_files = gtk_toggle_button_get_active(GTK_TOGGLE_BUTTON(checkbox_of));
+
+ g_key_file_load_from_file(config, config_file, G_KEY_FILE_NONE, NULL);
+
+ g_key_file_set_string(config, "filebrowser", "open_command", open_cmd);
+ g_key_file_set_boolean(config, "filebrowser", "show_hidden_files", show_hidden_files);
+ g_key_file_set_boolean(config, "filebrowser", "hide_object_files", hide_object_files);
+
+ if (! g_file_test(config_dir, G_FILE_TEST_IS_DIR) && p_utils->mkdir(config_dir, TRUE) != 0)
+ {
+ p_dialogs->show_msgbox(GTK_MESSAGE_ERROR,
+ _("Plugin configuration directory could not be created."));
+ }
+ else
+ {
+ /* write config to file */
+ data = g_key_file_to_data(config, NULL, NULL);
+ p_utils->write_file(config_file, data);
+ g_free(data);
+ }
+
+ /* apply the changes */
+ refresh();
+
+ g_free(config_dir);
+ g_key_file_free(config);
+ }
+ gtk_widget_destroy(dialog);
+}
+
+
+void cleanup(void)
+{
+ g_free(config_file);
+ g_free(open_cmd);
+ gtk_widget_destroy(file_view_vbox);
+ g_object_unref(G_OBJECT(entry_completion));
+}
Property changes on: trunk/filetree/src/filetree.c
___________________________________________________________________
Name: svn:executable
+ *
This was sent by the SourceForge.net collaborative development platform, the world's largest Open Source development site.
More information about the Plugins-Commits
mailing list