On 23 May 2018 at 12:01, Joe McCarron via Users <users@lists.geany.org> wrote:
>
>
> On Tuesday, May 22, 2018, 9:34:41 PM EDT, Lex Trotman <elextr@gmail.com>
> wrote:
> pythonbuild.py  is in /home/joe
>
>
>
> What directory is 'pythonbuild.py' located in and what was the working
> directory when you ran the CLI command?
>
> has always been in /home/joe    I am running the CLI from there also
> the working directory is dev/Arduino/sample/sample.ino  which is relative
> to my ~ location. The abs path of the working directory would be
> /home/joe/dev/Arduino/sample/sample.ino
>
> If your command is 'python pythonbuild.py
> dev/Arduino/sample/sample.ino' then it must be executed in the
> directory that contains 'pythonbuild.py' since the path is given
> relative to the working directory (and so is
> 'dev/Arduino/sample/sample.ino' but we havn't gotten to it yet :).
>
> yes, that is true
>
> Geany commands (by default) run with a working directory that is the
> directory of the current file displayed in the edit area, you can
> change this in the "working directory" column of the "set build
> commands" dialog to make it a fixed location such as the directory
> where 'pythonbuild.py' lives.
>
> so your saying move pythonbuild to my working directory, correct ?
> Ok, I will try that. So maybe the problem is the there is no way for the
> working
> directory to get to reference the up stream directory ? as in its ok to
> drill down but
> not up ?? I will try try moving the *.py file to the working directory.
>
> Yes, so the working directory is just use  %d%f so the whole thing in Geany
> python home/joe/pythonbuild.py  %d/%f
>
> but I get Invalid working directory
> "/home/joe/dev/Arduino/4X20OLED/4X20OLED.ino"
>
>
>
>
_______________________________________________
Users mailing list
Users@lists.geany.org
https://lists.geany.org/cgi-bin/mailman/listinfo/users