Revision: 2156 http://geany-plugins.svn.sourceforge.net/geany-plugins/?rev=2156&view=re... Author: frlan Date: 2011-08-16 09:26:43 +0000 (Tue, 16 Aug 2011)
Log Message: ----------- GeanyLaTeX: Also merging latest version of docu
Modified Paths: -------------- trunk/geany-plugins/geanylatex/doc/geanylatex.tex
Modified: trunk/geany-plugins/geanylatex/doc/geanylatex.tex =================================================================== --- trunk/geany-plugins/geanylatex/doc/geanylatex.tex 2011-08-16 09:26:20 UTC (rev 2155) +++ trunk/geany-plugins/geanylatex/doc/geanylatex.tex 2011-08-16 09:26:43 UTC (rev 2156) @@ -2,13 +2,11 @@ paper=a4,% fontsize=11pt,% twoside=false,% -DIV18, -headsepline, -plainheadsepline, -footsepline, -plainfootsepline, -%appendixprefix, -%automark,% +DIV18,% +headsepline,% +plainheadsepline,% +footsepline,% +plainfootsepline,% bibliography=totoc,% listof=totoc,% BCOR10mm,% @@ -18,11 +16,9 @@ \usepackage[utf8]{inputenc} \usepackage[english]{babel} \usepackage{float} -\usepackage{setspace} -\usepackage{mathpazo,courier} -\usepackage{listings,color} -\usepackage{courier} -\usepackage{tikz} +\usepackage{graphicx} +\usepackage{color} +\usepackage{listings} \lstset{basicstyle=\ttfamily\scriptsize} \lstset{showspaces=false} \lstset{showtabs=false} @@ -47,7 +43,7 @@ \hypersetup{pdftex=true, colorlinks=true, breaklinks=true, linkcolor=black, urlcolor=darkblue}
\title{Geany\LaTeX{} -- A \LaTeX{} plugin for Geany \[1.5ex] - \normalsize Version 0.6svn preview} + \normalsize Version 0.6svn} \author{Frank Lanitz \ \small{\href{mailto:frank@frank.uvena.de}{frank@frank.uvena.de}}} \date{\today}
@@ -62,11 +58,13 @@
\pagenumbering{Roman} -\maketitle -\tableofcontents -\listoftables -\listoffigures -\newpage +\maketitle{} +\tableofcontents{} +\listoftables{} +\listoffigures{} +\lstlistoflistings{} + +\newpage{} \pagenumbering{arabic} \section{About the plugin}
@@ -186,13 +184,11 @@ Compiling and installing the code is done by the following three commands:
-\begin{figure}[h!] -\begin{lstlisting} +\begin{lstlisting}[caption={Compiling with waf}] $ ./waf configure $ ./waf build $ ./waf install %$ \end{lstlisting} -\end{figure}
For more configuration details, run \texttt{./waf --help}
@@ -216,12 +212,11 @@ might like to use \texttt{htlatex}. The HTML version of this documentation shipped with source tarball has been compiled with
-\begin{figure}[h!] -\begin{lstlisting} +\begin{lstlisting}[caption={Compiling of documentation}] htlatex geanylatex.tex xhtml -cvalidate -interaction=batchmode \end{lstlisting} -\end{figure}
+ \section{Usage} \begin{figure}[h!] \centering{\includegraphics[height=7cm]{img/plugin_manager.png}} @@ -408,8 +403,7 @@ no be moved during the process. As an example for a book, this will be inserted to the document:
-\begin{figure}[h!] -\begin{lstlisting} +\begin{lstlisting}[caption={Example of BibTeX entry for a book}] @Book{ Author = {}, Editor = {}, @@ -418,8 +412,8 @@ Year = {}, } \end{lstlisting} -\end{figure}
+ \subsubsection{Inserting cite-reference}
Geany\LaTeX{} is searching here for *.bib-files inside the directory @@ -467,23 +461,21 @@ current position of cursor. If there is a selection activ, the selection will be included into environment.
-\begin{figure}[h!] \begin{lstlisting} \begin{your_environment} ... selected text ... \end{your_environment} \end{lstlisting} -\end{figure}
In case of an empty (= no selection) an empty environment with -\begin{figure}[h!] + \begin{lstlisting} \begin{your_environment} ... \end{your_environment} \end{lstlisting} -\end{figure}
+ will be inserted to the document.
\begin{figure}[h!] @@ -567,6 +559,7 @@ \caption{Dialog for inserting \textbackslash{}usepackage{}} \end{figure}
+ \section{Configuration}
GeanyLaTeX{} can be configured in three major ways: @@ -662,6 +655,8 @@ Insert description list & Inserts an description environment as well as a 1\up{st} \textbackslash{}item element.\\hline Insert itemize list & Inserts an itemize environment as well as a 1\up{st} \textbackslash{}item element.\\hline Insert enumerate list & Inserts an enumerate environment as well as a 1\up{st} \textbackslash{}item element.\\hline +Insert BibTeX reference dialog & Opens up a dialog which is supporting insertion of BibTeX-references based on \texttt{bib}-files inside current directory.\\hline +Toggle autocompletion for _ and ^ & Controlls whether braces should be inserted after _ and ^ \ or not. \end{tabular} \end{table}
@@ -684,7 +679,9 @@ \texttt{glatex_deactivate_toolbaritems_with_non_latex=false}. As a result, your config file could look similar to this:
-\begin{lstlisting} +\begin{lstlisting}[caption={Configuration to enable toolbar buttons if % + no \LaTeX{} is active}] + [general] glatex_set_koma_active=false glatex_set_toolbar_active=true @@ -706,7 +703,7 @@ two documents it can be set to keep even there is no LaTeX document activ.
-\begin{lstlisting} +\begin{lstlisting}[caption={Configuration to keep \LaTeX{} menu inside menubar}] [general] glatex_set_koma_active=false glatex_set_toolbar_active=true @@ -727,7 +724,7 @@ time you might set \texttt{glatex_add_menu_on_startup} inside menu section of configuration file to true.
-\begin{lstlisting} +\begin{lstlisting}[caption={Configuration add \LaTeX{} menu on startup of Geany}] [general] glatex_set_koma_active=false glatex_set_toolbar_active=true @@ -752,8 +749,7 @@ \texttt{glatex_set_autocompletion_contextsize} followed by an integer value. An example could look like this:
-\begin{figure}[h!] -\begin{lstlisting} +\begin{lstlisting}[caption={Example configuration for contextsize of autocompletion}] [general] glatex_set_koma_active=true glatex_set_toolbar_active=false @@ -762,14 +758,12 @@ [autocompletion] glatex_set_autocompletion_contextsize=2 \end{lstlisting} -\caption{general.conf example for contextsize} -\end{figure}
\subsubsection{Apply autocompletion only to \TeX{}-like files} With this option, you can force Geany\LaTeX{} to apply all autocompletion functions also to non-\TeX{} file types as for example an C-source code file. As this is only in a very low number of cases a really good idea, the option is by default turned on.
-\begin{figure}[h!] -\begin{lstlisting} +\begin{lstlisting}[caption={general.conf example for deactivating file % + type specific restrictions for autocompletion}] [general] glatex_set_koma_active=true glatex_set_toolbar_active=false @@ -778,8 +772,6 @@ [autocompletion] glatex_autocompletion_only_for_latex=false \end{lstlisting} -\caption{general.conf example for deactivating file type specific restrictions for autocompletion} -\end{figure}
\subsubsection{Customized reference strings}
@@ -790,7 +782,7 @@ \texttt{glatex_reference_all} inside configuration file as shown inside the example configuration snippet.
-\begin{lstlisting} +\begin{lstlisting}[caption={Configuration example for customized reference strings}] [general] glatex_set_koma_active=true glatex_set_toolbar_active=true @@ -820,7 +812,8 @@ inside \texttt{[autocompletion]} section of configuration file. An example which is turning off the feature might can look like this:
-\begin{lstlisting} +\begin{lstlisting}[caption={Configuration example for autocompletion of % + {} after _ and \symbol{94}}] [general] glatex_set_koma_active=true glatex_set_toolbar_active=true @@ -997,8 +990,7 @@
A possible snippet for snippets.conf could be:
-\begin{figure}[h!] -\begin{lstlisting} +\begin{lstlisting}[caption={Minimal snippets.conf for \LaTeX{}}] [LaTeX] frame=\begin{frame}\n%ws%\frametitle{%cursor%}\n%ws%%cursor%\n\end{frame} block=\begin{block}{%cursor%}\n%ws%%cursor%\n\end{block} @@ -1006,7 +998,6 @@ enumerate=\begin{enumerate}\n%ws%\item %cursor%\n\end{enumerate} description=\begin{description}\n%ws%\item %cursor%\n\end{description} \end{lstlisting} -\end{figure}
A snapshot of the authors' last version for LaTeX can be found on \url{http://www.geany.org/Download/Extras%7D @@ -1047,6 +1038,19 @@ another tab in Geany's message widget.\ \textbf{Homepage:} \url{http://plugins.geany.org/addons/%7D
+ +\subsubsection{Tableconvert to convert a tabulator separated list into a table} + +Its an quiet annyoing problem which happens from time to time: There +is a list of values e.g. from some experiment which needs to be +included into your document. The \LaTeX{}-export filter of your +spreadsheet tool is not very adavanced and you just want to insert a +couple of lines and have to do it manually. + +Tableconvert is offering to convert a tabular separated list into an +table. The plugin is also offering to convert such a list into a +\LaTeX{}-like table and therefor is maybe useful on daily work. + \section{License} Geany\LaTeX{} and all its parts is distributed under the terms of the GNU General Public License as published by the Free Software
This was sent by the SourceForge.net collaborative development platform, the world's largest Open Source development site.
plugins-commits@lists.geany.org