Revision: 980 http://geany-plugins.svn.sourceforge.net/geany-plugins/?rev=980&view=rev Author: frlan Date: 2009-10-11 19:59:59 +0000 (Sun, 11 Oct 2009)
Log Message: ----------- GeanySendMail: Use waf instead of autotools for compiling plugin
Modified Paths: -------------- trunk/geanysendmail/ChangeLog trunk/geanysendmail/INSTALL trunk/geanysendmail/NEWS trunk/geanysendmail/README
Added Paths: ----------- trunk/geanysendmail/waf trunk/geanysendmail/wscript
Removed Paths: ------------- trunk/geanysendmail/Makefile.am trunk/geanysendmail/autogen.sh trunk/geanysendmail/configure.in trunk/geanysendmail/depcomp trunk/geanysendmail/indent-all.sh trunk/geanysendmail/install-sh trunk/geanysendmail/makefile.win32 trunk/geanysendmail/missing
Modified: trunk/geanysendmail/ChangeLog =================================================================== --- trunk/geanysendmail/ChangeLog 2009-10-11 19:58:40 UTC (rev 979) +++ trunk/geanysendmail/ChangeLog 2009-10-11 19:59:59 UTC (rev 980) @@ -1,3 +1,8 @@ +2009-10-08 Frank Lanitz <frank(at)frank(dot)uvena(dot)de> + + * Use waf for building plugin in faovr of autotools. + + 2009-07-18 Frank Lanitz <frank(at)frank(dot)uvena(dot)de>
* Update to Geany plugin API v147 and make usage of single header includes.
Modified: trunk/geanysendmail/INSTALL =================================================================== --- trunk/geanysendmail/INSTALL 2009-10-11 19:58:40 UTC (rev 979) +++ trunk/geanysendmail/INSTALL 2009-10-11 19:59:59 UTC (rev 980) @@ -1,16 +1,18 @@ These installation instructions are written for a Linux system.
At the time of this writing, building the plugin requires a recent SVN checkout -of the Geany sources (API version 104, Geany v0.16svn+). +of the Geany sources (API version 149, Geany v0.19svn+).
To compile and install just follow the typical three steps:
- % configure - % make - % make install + % ./waf configure + % ./waf build + % ./waf install
The plugin will be installed into your $prefix/lib/geany of your Geany -installation. This should be in most cases /usr/ or /usr/local. So you will -need in most cases to run make install under root. If you don't want to -install it global, but on your own home dir, just --prefix option for configure. +installation. This should be in most cases /usr/ or /usr/local. So you +will need in most cases to run make install under root. If you don't +want to install it global, but on your own home dir, just --prefix +option for ./waf configure. + Please check README for more detailed information.
Deleted: trunk/geanysendmail/Makefile.am =================================================================== --- trunk/geanysendmail/Makefile.am 2009-10-11 19:58:40 UTC (rev 979) +++ trunk/geanysendmail/Makefile.am 2009-10-11 19:59:59 UTC (rev 980) @@ -1,17 +0,0 @@ -SUBDIRS = src po - -EXTRA_DIST = \ - autogen.sh \ - makefile.win32 \ - po/LINGUAS - -dist-bzip2: distdir - BZIP2=$(BZIP2_ENV) $(AMTAR) --bzip2 -chof $(distdir).tar.bz2 $(distdir) - -rm -rf $(distdir) - -sign: - if test -f $(PACKAGE)-$(VERSION).tar.gz; then \ - gpg --detach-sign --digest-algo SHA512 $(PACKAGE)-$(VERSION).tar.gz; fi - if test -f $(PACKAGE)-$(VERSION).tar.bz2; then \ - gpg --detach-sign --digest-algo SHA512 $(PACKAGE)-$(VERSION).tar.bz2; fi -
Modified: trunk/geanysendmail/NEWS =================================================================== --- trunk/geanysendmail/NEWS 2009-10-11 19:58:40 UTC (rev 979) +++ trunk/geanysendmail/NEWS 2009-10-11 19:59:59 UTC (rev 980) @@ -1,4 +1,4 @@ -GeanySendMail 0.4.2 (26. May 2009=: +GeanySendMail 0.4.2 (26. May 2009): * Added cancel button to recipient's address dialog * Some minor code cleanup
Modified: trunk/geanysendmail/README =================================================================== --- trunk/geanysendmail/README 2009-10-11 19:58:40 UTC (rev 979) +++ trunk/geanysendmail/README 2009-10-11 19:59:59 UTC (rev 980) @@ -26,8 +26,8 @@ geany-devel. Please note that in order to compile and use this plugin, you need Geany 0.18 or later (Geany Plugin API v147 or higher).
-Furthermore you need, of course, a C compiler and the Make tool. The -GNU versions of these tools are recommended. +Furthermore you need, of course, a C compiler and Python +installed. The GNU versions of C compiler is recommended.
Installation @@ -36,12 +36,12 @@ Compiling and installing the code is done by the following three commands:
-$ ./configure -$ make -$ make install +$ ./waf configure +$ ./waf build +$ ./waf install
For more configuration details run -$ ./configure --help +$ ./waf --help
If there are any errors during compilation, check your build environment and try to find the error, otherwise contact one of the authors. (See below)
Deleted: trunk/geanysendmail/autogen.sh =================================================================== --- trunk/geanysendmail/autogen.sh 2009-10-11 19:58:40 UTC (rev 979) +++ trunk/geanysendmail/autogen.sh 2009-10-11 19:59:59 UTC (rev 980) @@ -1,159 +0,0 @@ -#!/bin/sh -# Run this to generate all the initial makefiles, etc. - -srcdir=`dirname $0` -test -z "$srcdir" && srcdir=. - -DIE=0 - -if [ -n "$GNOME2_DIR" ]; then - ACLOCAL_FLAGS="-I $GNOME2_DIR/share/aclocal $ACLOCAL_FLAGS" - LD_LIBRARY_PATH="$GNOME2_DIR/lib:$LD_LIBRARY_PATH" - PATH="$GNOME2_DIR/bin:$PATH" - export PATH - export LD_LIBRARY_PATH -fi - -(test -f $srcdir/configure.in) || { - echo -n "**Error**: Directory "`$srcdir'" does not look like the" - echo " top-level package directory" - exit 1 -} - -(autoconf --version) < /dev/null > /dev/null 2>&1 || { - echo - echo "**Error**: You must have `autoconf' installed." - echo "Download the appropriate package for your distribution," - echo "or get the source tarball at ftp://ftp.gnu.org/pub/gnu/" - DIE=1 -} - -(grep "^AC_PROG_INTLTOOL" $srcdir/configure.in >/dev/null) && { - (intltoolize --version) < /dev/null > /dev/null 2>&1 || { - echo - echo "**Error**: You must have `intltool' installed." - echo "You can get it from:" - echo " ftp://ftp.gnome.org/pub/GNOME/" - DIE=1 - } -} - -(grep "^AM_PROG_XML_I18N_TOOLS" $srcdir/configure.in >/dev/null) && { - (xml-i18n-toolize --version) < /dev/null > /dev/null 2>&1 || { - echo - echo "**Error**: You must have `xml-i18n-toolize' installed." - echo "You can get it from:" - echo " ftp://ftp.gnome.org/pub/GNOME/" - DIE=1 - } -} - -(grep "^AM_PROG_LIBTOOL" $srcdir/configure.in >/dev/null) && { - (libtool --version) < /dev/null > /dev/null 2>&1 || { - echo - echo "**Error**: You must have `libtool' installed." - echo "You can get it from: ftp://ftp.gnu.org/pub/gnu/" - DIE=1 - } -} - -(grep "^AM_GLIB_GNU_GETTEXT" $srcdir/configure.in >/dev/null) && { - (grep "sed.*POTFILES" $srcdir/configure.in) > /dev/null || \ - (glib-gettextize --version) < /dev/null > /dev/null 2>&1 || { - echo - echo "**Error**: You must have `glib' installed." - echo "You can get it from: ftp://ftp.gtk.org/pub/gtk" - DIE=1 - } -} - -(automake --version) < /dev/null > /dev/null 2>&1 || { - echo - echo "**Error**: You must have `automake' installed." - echo "You can get it from: ftp://ftp.gnu.org/pub/gnu/" - DIE=1 - NO_AUTOMAKE=yes -} - - -# if no automake, don't bother testing for aclocal -test -n "$NO_AUTOMAKE" || (aclocal --version) < /dev/null > /dev/null 2>&1 || { - echo - echo "**Error**: Missing `aclocal'. The version of `automake'" - echo "installed doesn't appear recent enough." - echo "You can get automake from ftp://ftp.gnu.org/pub/gnu/" - DIE=1 -} - -if test "$DIE" -eq 1; then - exit 1 -fi - -if test -z "$*"; then - echo "**Warning**: I am going to run `configure' with no arguments." - echo "If you wish to pass any to it, please specify them on the" - echo `$0'" command line." - echo -fi - -case $CC in -xlc ) - am_opt=--include-deps;; -esac - -for coin in `find $srcdir -path $srcdir/CVS -prune -o -name configure.in -print` -do - dr=`dirname $coin` - if test -f $dr/NO-AUTO-GEN; then - echo skipping $dr -- flagged as no auto-gen - else - echo processing $dr - ( cd $dr - - aclocalinclude="$ACLOCAL_FLAGS" - - if grep "^AM_GLIB_GNU_GETTEXT" configure.in >/dev/null; then - echo "Creating $dr/aclocal.m4 ..." - test -r $dr/aclocal.m4 || touch $dr/aclocal.m4 - echo "Running glib-gettextize... Ignore non-fatal messages." - echo "no" | glib-gettextize --force --copy - echo "Making $dr/aclocal.m4 writable ..." - test -r $dr/aclocal.m4 && chmod u+w $dr/aclocal.m4 - fi - if grep "^AC_PROG_INTLTOOL" configure.in >/dev/null; then - echo "Running intltoolize..." - intltoolize --copy --force --automake - fi - if grep "^AM_PROG_XML_I18N_TOOLS" configure.in >/dev/null; then - echo "Running xml-i18n-toolize..." - xml-i18n-toolize --copy --force --automake - fi - if grep "^AM_PROG_LIBTOOL" configure.in >/dev/null; then - if test -z "$NO_LIBTOOLIZE" ; then - echo "Running libtoolize..." - libtoolize --force --copy - fi - fi - echo "Running aclocal $aclocalinclude ..." - aclocal $aclocalinclude - if grep "^AM_CONFIG_HEADER" configure.in >/dev/null; then - echo "Running autoheader..." - autoheader - fi - echo "Running automake --gnu $am_opt ..." - automake --add-missing --gnu $am_opt - echo "Running autoconf ..." - autoconf - ) - fi -done - -conf_flags="--enable-maintainer-mode" - -if test x$NOCONFIGURE = x; then - echo Running $srcdir/configure $conf_flags "$@" ... - $srcdir/configure $conf_flags "$@" \ - && echo Now type `make' to compile. || exit 1 -else - echo Skipping configure process. -fi
Deleted: trunk/geanysendmail/configure.in =================================================================== --- trunk/geanysendmail/configure.in 2009-10-11 19:58:40 UTC (rev 979) +++ trunk/geanysendmail/configure.in 2009-10-11 19:59:59 UTC (rev 980) @@ -1,61 +0,0 @@ -# Process this file with autoconf to produce a configure script. - -AC_INIT(configure.in) -AM_INIT_AUTOMAKE(geanysendmail, 0.4.2) - -AM_CONFIG_HEADER(config.h) - -AC_PROG_CC - -AC_DISABLE_STATIC -AM_PROG_LIBTOOL -LIBTOOL="$LIBTOOL --silent" - -AC_PROG_INSTALL - -# checking for Geany -PKG_CHECK_MODULES(GEANY, [geany >= 0.18]) -AC_SUBST(GTK_CFLAGS) -AC_SUBST(GTK_LIBS) - -GEANY_VERSION=`$PKG_CONFIG --modversion geany` -GTK_VERSION=`$PKG_CONFIG --modversion gtk+-2.0` - -# i18n -GETTEXT_PACKAGE=geanysendmail -AC_SUBST(GETTEXT_PACKAGE) -AC_DEFINE_UNQUOTED(GETTEXT_PACKAGE,"$GETTEXT_PACKAGE", [Gettext package.]) - -ALL_LINGUAS="`sed -e '/^#/d' $srcdir/po/LINGUAS`" # take all languages found in file po/LINGUAS - -AM_GLIB_GNU_GETTEXT -# workaround for intltool bug (http://bugzilla.gnome.org/show_bug.cgi?id=490845) -if test "x$MSGFMT" = "xno"; then - AC_MSG_ERROR([msgfmt not found. Please install the gettext package.]) -fi - -# intltool hack to define install_sh on Debian/Ubuntu systems -if test "x$install_sh" = "x"; then - install_sh="`pwd`/install-sh" - AC_SUBST(install_sh) -fi - -# get the plugin installed at the correct location for Geany -# TODO find a way to NOT override --libdir command line option if given -libdir="`$PKG_CONFIG --variable=libdir geany`/geany" - - -AC_OUTPUT([ -Makefile -src/Makefile -po/Makefile.in -]) - -echo "----------------------------------------" -echo "Install geanysendmail plugin binary in : ${libdir}" -echo "Install geanysendmail in : ${prefix}" -echo "Using Geany version : ${GEANY_VERSION}" -echo "Using GTK version : ${GTK_VERSION}" -echo "" -echo "Configuration is done OK." -echo ""
Deleted: trunk/geanysendmail/depcomp =================================================================== --- trunk/geanysendmail/depcomp 2009-10-11 19:58:40 UTC (rev 979) +++ trunk/geanysendmail/depcomp 2009-10-11 19:59:59 UTC (rev 980) @@ -1,584 +0,0 @@ -#! /bin/sh -# depcomp - compile a program generating dependencies as side-effects - -scriptversion=2006-10-15.18 - -# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2006 Free Software -# Foundation, Inc. - -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2, or (at your option) -# any later version. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. - -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA -# 02110-1301, USA. - -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. - -# Originally written by Alexandre Oliva oliva@dcc.unicamp.br. - -case $1 in - '') - echo "$0: No command. Try `$0 --help' for more information." 1>&2 - exit 1; - ;; - -h | --h*) - cat <<\EOF -Usage: depcomp [--help] [--version] PROGRAM [ARGS] - -Run PROGRAMS ARGS to compile a file, generating dependencies -as side-effects. - -Environment variables: - depmode Dependency tracking mode. - source Source file read by `PROGRAMS ARGS'. - object Object file output by `PROGRAMS ARGS'. - DEPDIR directory where to store dependencies. - depfile Dependency file to output. - tmpdepfile Temporary file to use when outputing dependencies. - libtool Whether libtool is used (yes/no). - -Report bugs to bug-automake@gnu.org. -EOF - exit $? - ;; - -v | --v*) - echo "depcomp $scriptversion" - exit $? - ;; -esac - -if test -z "$depmode" || test -z "$source" || test -z "$object"; then - echo "depcomp: Variables source, object and depmode must be set" 1>&2 - exit 1 -fi - -# Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po. -depfile=${depfile-`echo "$object" | - sed 's|[^\/]*$|'${DEPDIR-.deps}'/&|;s|.([^.]*)$|.P\1|;s|Pobj$|Po|'`} -tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/.([^.]*)$/.T\1/'`} - -rm -f "$tmpdepfile" - -# Some modes work just like other modes, but use different flags. We -# parameterize here, but still list the modes in the big case below, -# to make depend.m4 easier to write. Note that we *cannot* use a case -# here, because this file can only contain one case statement. -if test "$depmode" = hp; then - # HP compiler uses -M and no extra arg. - gccflag=-M - depmode=gcc -fi - -if test "$depmode" = dashXmstdout; then - # This is just like dashmstdout with a different argument. - dashmflag=-xM - depmode=dashmstdout -fi - -case "$depmode" in -gcc3) -## gcc 3 implements dependency tracking that does exactly what -## we want. Yay! Note: for some reason libtool 1.4 doesn't like -## it if -MD -MP comes after the -MF stuff. Hmm. -## Unfortunately, FreeBSD c89 acceptance of flags depends upon -## the command line argument order; so add the flags where they -## appear in depend2.am. Note that the slowdown incurred here -## affects only configure: in makefiles, %FASTDEP% shortcuts this. - for arg - do - case $arg in - -c) set fnord "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" "$arg" ;; - *) set fnord "$@" "$arg" ;; - esac - shift # fnord - shift # $arg - done - "$@" - stat=$? - if test $stat -eq 0; then : - else - rm -f "$tmpdepfile" - exit $stat - fi - mv "$tmpdepfile" "$depfile" - ;; - -gcc) -## There are various ways to get dependency output from gcc. Here's -## why we pick this rather obscure method: -## - Don't want to use -MD because we'd like the dependencies to end -## up in a subdir. Having to rename by hand is ugly. -## (We might end up doing this anyway to support other compilers.) -## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like -## -MM, not -M (despite what the docs say). -## - Using -M directly means running the compiler twice (even worse -## than renaming). - if test -z "$gccflag"; then - gccflag=-MD, - fi - "$@" -Wp,"$gccflag$tmpdepfile" - stat=$? - if test $stat -eq 0; then : - else - rm -f "$tmpdepfile" - exit $stat - fi - rm -f "$depfile" - echo "$object : \" > "$depfile" - alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz -## The second -e expression handles DOS-style file names with drive letters. - sed -e 's/^[^:]*: / /' \ - -e 's/^['$alpha']:/[^:]*: / /' < "$tmpdepfile" >> "$depfile" -## This next piece of magic avoids the `deleted header file' problem. -## The problem is that when a header file which appears in a .P file -## is deleted, the dependency causes make to die (because there is -## typically no way to rebuild the header). We avoid this by adding -## dummy dependencies for each header file. Too bad gcc doesn't do -## this for us directly. - tr ' ' ' -' < "$tmpdepfile" | -## Some versions of gcc put a space before the `:'. On the theory -## that the space means something, we add a space to the output as -## well. -## Some versions of the HPUX 10.20 sed can't process this invocation -## correctly. Breaking it into two sed invocations is a workaround. - sed -e 's/^\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" - rm -f "$tmpdepfile" - ;; - -hp) - # This case exists only to let depend.m4 do its work. It works by - # looking at the text of this script. This case will never be run, - # since it is checked for above. - exit 1 - ;; - -sgi) - if test "$libtool" = yes; then - "$@" "-Wp,-MDupdate,$tmpdepfile" - else - "$@" -MDupdate "$tmpdepfile" - fi - stat=$? - if test $stat -eq 0; then : - else - rm -f "$tmpdepfile" - exit $stat - fi - rm -f "$depfile" - - if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files - echo "$object : \" > "$depfile" - - # Clip off the initial element (the dependent). Don't try to be - # clever and replace this with sed code, as IRIX sed won't handle - # lines with more than a fixed number of characters (4096 in - # IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines; - # the IRIX cc adds comments like `#:fec' to the end of the - # dependency line. - tr ' ' ' -' < "$tmpdepfile" \ - | sed -e 's/^.*.o://' -e 's/#.*$//' -e '/^$/ d' | \ - tr ' -' ' ' >> $depfile - echo >> $depfile - - # The second pass generates a dummy entry for each header file. - tr ' ' ' -' < "$tmpdepfile" \ - | sed -e 's/^.*.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \ - >> $depfile - else - # The sourcefile does not contain any dependencies, so just - # store a dummy comment line, to avoid errors with the Makefile - # "include basename.Plo" scheme. - echo "#dummy" > "$depfile" - fi - rm -f "$tmpdepfile" - ;; - -aix) - # The C for AIX Compiler uses -M and outputs the dependencies - # in a .u file. In older versions, this file always lives in the - # current directory. Also, the AIX compiler puts `$object:' at the - # start of each line; $object doesn't have directory information. - # Version 6 uses the directory in both cases. - stripped=`echo "$object" | sed 's/(.*)..*$/\1/'` - tmpdepfile="$stripped.u" - if test "$libtool" = yes; then - "$@" -Wc,-M - else - "$@" -M - fi - stat=$? - - if test -f "$tmpdepfile"; then : - else - stripped=`echo "$stripped" | sed 's,^.*/,,'` - tmpdepfile="$stripped.u" - fi - - if test $stat -eq 0; then : - else - rm -f "$tmpdepfile" - exit $stat - fi - - if test -f "$tmpdepfile"; then - outname="$stripped.o" - # Each line is of the form `foo.o: dependent.h'. - # Do two passes, one to just change these to - # `$object: dependent.h' and one to simply `dependent.h:'. - sed -e "s,^$outname:,$object :," < "$tmpdepfile" > "$depfile" - sed -e "s,^$outname: (.*)$,\1:," < "$tmpdepfile" >> "$depfile" - else - # The sourcefile does not contain any dependencies, so just - # store a dummy comment line, to avoid errors with the Makefile - # "include basename.Plo" scheme. - echo "#dummy" > "$depfile" - fi - rm -f "$tmpdepfile" - ;; - -icc) - # Intel's C compiler understands `-MD -MF file'. However on - # icc -MD -MF foo.d -c -o sub/foo.o sub/foo.c - # ICC 7.0 will fill foo.d with something like - # foo.o: sub/foo.c - # foo.o: sub/foo.h - # which is wrong. We want: - # sub/foo.o: sub/foo.c - # sub/foo.o: sub/foo.h - # sub/foo.c: - # sub/foo.h: - # ICC 7.1 will output - # foo.o: sub/foo.c sub/foo.h - # and will wrap long lines using \ : - # foo.o: sub/foo.c ... \ - # sub/foo.h ... \ - # ... - - "$@" -MD -MF "$tmpdepfile" - stat=$? - if test $stat -eq 0; then : - else - rm -f "$tmpdepfile" - exit $stat - fi - rm -f "$depfile" - # Each line is of the form `foo.o: dependent.h', - # or `foo.o: dep1.h dep2.h ', or ` dep3.h dep4.h '. - # Do two passes, one to just change these to - # `$object: dependent.h' and one to simply `dependent.h:'. - sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile" - # Some versions of the HPUX 10.20 sed can't process this invocation - # correctly. Breaking it into two sed invocations is a workaround. - sed 's,^[^:]*: (.*)$,\1,;s/^\$//;/^$/d;/:$/d' < "$tmpdepfile" | - sed -e 's/$/ :/' >> "$depfile" - rm -f "$tmpdepfile" - ;; - -hp2) - # The "hp" stanza above does not work with aCC (C++) and HP's ia64 - # compilers, which have integrated preprocessors. The correct option - # to use with these is +Maked; it writes dependencies to a file named - # 'foo.d', which lands next to the object file, wherever that - # happens to be. - # Much of this is similar to the tru64 case; see comments there. - dir=`echo "$object" | sed -e 's|/[^/]*$|/|'` - test "x$dir" = "x$object" && dir= - base=`echo "$object" | sed -e 's|^.*/||' -e 's/.o$//' -e 's/.lo$//'` - if test "$libtool" = yes; then - tmpdepfile1=$dir$base.d - tmpdepfile2=$dir.libs/$base.d - "$@" -Wc,+Maked - else - tmpdepfile1=$dir$base.d - tmpdepfile2=$dir$base.d - "$@" +Maked - fi - stat=$? - if test $stat -eq 0; then : - else - rm -f "$tmpdepfile1" "$tmpdepfile2" - exit $stat - fi - - for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" - do - test -f "$tmpdepfile" && break - done - if test -f "$tmpdepfile"; then - sed -e "s,^.*.[a-z]*:,$object:," "$tmpdepfile" > "$depfile" - # Add `dependent.h:' lines. - sed -ne '2,${; s/^ *//; s/ \*$//; s/$/:/; p;}' "$tmpdepfile" >> "$depfile" - else - echo "#dummy" > "$depfile" - fi - rm -f "$tmpdepfile" "$tmpdepfile2" - ;; - -tru64) - # The Tru64 compiler uses -MD to generate dependencies as a side - # effect. `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'. - # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put - # dependencies in `foo.d' instead, so we check for that too. - # Subdirectories are respected. - dir=`echo "$object" | sed -e 's|/[^/]*$|/|'` - test "x$dir" = "x$object" && dir= - base=`echo "$object" | sed -e 's|^.*/||' -e 's/.o$//' -e 's/.lo$//'` - - if test "$libtool" = yes; then - # With Tru64 cc, shared objects can also be used to make a - # static library. This mechanism is used in libtool 1.4 series to - # handle both shared and static libraries in a single compilation. - # With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d. - # - # With libtool 1.5 this exception was removed, and libtool now - # generates 2 separate objects for the 2 libraries. These two - # compilations output dependencies in $dir.libs/$base.o.d and - # in $dir$base.o.d. We have to check for both files, because - # one of the two compilations can be disabled. We should prefer - # $dir$base.o.d over $dir.libs/$base.o.d because the latter is - # automatically cleaned when .libs/ is deleted, while ignoring - # the former would cause a distcleancheck panic. - tmpdepfile1=$dir.libs/$base.lo.d # libtool 1.4 - tmpdepfile2=$dir$base.o.d # libtool 1.5 - tmpdepfile3=$dir.libs/$base.o.d # libtool 1.5 - tmpdepfile4=$dir.libs/$base.d # Compaq CCC V6.2-504 - "$@" -Wc,-MD - else - tmpdepfile1=$dir$base.o.d - tmpdepfile2=$dir$base.d - tmpdepfile3=$dir$base.d - tmpdepfile4=$dir$base.d - "$@" -MD - fi - - stat=$? - if test $stat -eq 0; then : - else - rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4" - exit $stat - fi - - for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4" - do - test -f "$tmpdepfile" && break - done - if test -f "$tmpdepfile"; then - sed -e "s,^.*.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile" - # That's a tab and a space in the []. - sed -e 's,^.*.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile" - else - echo "#dummy" > "$depfile" - fi - rm -f "$tmpdepfile" - ;; - -#nosideeffect) - # This comment above is used by automake to tell side-effect - # dependency tracking mechanisms from slower ones. - -dashmstdout) - # Important note: in order to support this mode, a compiler *must* - # always write the preprocessed file to stdout, regardless of -o. - "$@" || exit $? - - # Remove the call to Libtool. - if test "$libtool" = yes; then - while test $1 != '--mode=compile'; do - shift - done - shift - fi - - # Remove `-o $object'. - IFS=" " - for arg - do - case $arg in - -o) - shift - ;; - $object) - shift - ;; - *) - set fnord "$@" "$arg" - shift # fnord - shift # $arg - ;; - esac - done - - test -z "$dashmflag" && dashmflag=-M - # Require at least two characters before searching for `:' - # in the target name. This is to cope with DOS-style filenames: - # a dependency such as `c:/foo/bar' could be seen as target `c' otherwise. - "$@" $dashmflag | - sed 's:^[ ]*[^: ][^:][^:]*:[ ]*:'"$object"': :' > "$tmpdepfile" - rm -f "$depfile" - cat < "$tmpdepfile" > "$depfile" - tr ' ' ' -' < "$tmpdepfile" | \ -## Some versions of the HPUX 10.20 sed can't process this invocation -## correctly. Breaking it into two sed invocations is a workaround. - sed -e 's/^\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" - rm -f "$tmpdepfile" - ;; - -dashXmstdout) - # This case only exists to satisfy depend.m4. It is never actually - # run, as this mode is specially recognized in the preamble. - exit 1 - ;; - -makedepend) - "$@" || exit $? - # Remove any Libtool call - if test "$libtool" = yes; then - while test $1 != '--mode=compile'; do - shift - done - shift - fi - # X makedepend - shift - cleared=no - for arg in "$@"; do - case $cleared in - no) - set ""; shift - cleared=yes ;; - esac - case "$arg" in - -D*|-I*) - set fnord "$@" "$arg"; shift ;; - # Strip any option that makedepend may not understand. Remove - # the object too, otherwise makedepend will parse it as a source file. - -*|$object) - ;; - *) - set fnord "$@" "$arg"; shift ;; - esac - done - obj_suffix="`echo $object | sed 's/^.*././'`" - touch "$tmpdepfile" - ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@" - rm -f "$depfile" - cat < "$tmpdepfile" > "$depfile" - sed '1,2d' "$tmpdepfile" | tr ' ' ' -' | \ -## Some versions of the HPUX 10.20 sed can't process this invocation -## correctly. Breaking it into two sed invocations is a workaround. - sed -e 's/^\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" - rm -f "$tmpdepfile" "$tmpdepfile".bak - ;; - -cpp) - # Important note: in order to support this mode, a compiler *must* - # always write the preprocessed file to stdout. - "$@" || exit $? - - # Remove the call to Libtool. - if test "$libtool" = yes; then - while test $1 != '--mode=compile'; do - shift - done - shift - fi - - # Remove `-o $object'. - IFS=" " - for arg - do - case $arg in - -o) - shift - ;; - $object) - shift - ;; - *) - set fnord "$@" "$arg" - shift # fnord - shift # $arg - ;; - esac - done - - "$@" -E | - sed -n -e '/^# [0-9][0-9]* "([^"]*)".*/ s:: \1 \:p' \ - -e '/^#line [0-9][0-9]* "([^"]*)".*/ s:: \1 \:p' | - sed '$ s: \$::' > "$tmpdepfile" - rm -f "$depfile" - echo "$object : \" > "$depfile" - cat < "$tmpdepfile" >> "$depfile" - sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \$//;s/$/ :/' >> "$depfile" - rm -f "$tmpdepfile" - ;; - -msvisualcpp) - # Important note: in order to support this mode, a compiler *must* - # always write the preprocessed file to stdout, regardless of -o, - # because we must use -o when running libtool. - "$@" || exit $? - IFS=" " - for arg - do - case "$arg" in - "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI") - set fnord "$@" - shift - shift - ;; - *) - set fnord "$@" "$arg" - shift - shift - ;; - esac - done - "$@" -E | - sed -n '/^#line [0-9][0-9]* "([^"]*)"/ s::echo "`cygpath -u \"\1\"`":p' | sort | uniq > "$tmpdepfile" - rm -f "$depfile" - echo "$object : \" > "$depfile" - . "$tmpdepfile" | sed 's% %\ %g' | sed -n '/^(.*)$/ s:: \1 \:p' >> "$depfile" - echo " " >> "$depfile" - . "$tmpdepfile" | sed 's% %\ %g' | sed -n '/^(.*)$/ s::\1::p' >> "$depfile" - rm -f "$tmpdepfile" - ;; - -none) - exec "$@" - ;; - -*) - echo "Unknown depmode $depmode" 1>&2 - exit 1 - ;; -esac - -exit 0 - -# Local Variables: -# mode: shell-script -# sh-indentation: 2 -# eval: (add-hook 'write-file-hooks 'time-stamp) -# time-stamp-start: "scriptversion=" -# time-stamp-format: "%:y-%02m-%02d.%02H" -# time-stamp-end: "$" -# End:
Deleted: trunk/geanysendmail/indent-all.sh =================================================================== --- trunk/geanysendmail/indent-all.sh 2009-10-11 19:58:40 UTC (rev 979) +++ trunk/geanysendmail/indent-all.sh 2009-10-11 19:59:59 UTC (rev 980) @@ -1,4 +0,0 @@ -#!/bin/sh -indent -bli0 -i8 -cli8 -npcs -l100 *.c -rm *~ -
Deleted: trunk/geanysendmail/install-sh =================================================================== --- trunk/geanysendmail/install-sh 2009-10-11 19:58:40 UTC (rev 979) +++ trunk/geanysendmail/install-sh 2009-10-11 19:59:59 UTC (rev 980) @@ -1,507 +0,0 @@ -#!/bin/sh -# install - install a program, script, or datafile - -scriptversion=2006-10-14.15 - -# This originates from X11R5 (mit/util/scripts/install.sh), which was -# later released in X11R6 (xc/config/util/install.sh) with the -# following copyright and license. -# -# Copyright (C) 1994 X Consortium -# -# Permission is hereby granted, free of charge, to any person obtaining a copy -# of this software and associated documentation files (the "Software"), to -# deal in the Software without restriction, including without limitation the -# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or -# sell copies of the Software, and to permit persons to whom the Software is -# furnished to do so, subject to the following conditions: -# -# The above copyright notice and this permission notice shall be included in -# all copies or substantial portions of the Software. -# -# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR -# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, -# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE -# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN -# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC- -# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. -# -# Except as contained in this notice, the name of the X Consortium shall not -# be used in advertising or otherwise to promote the sale, use or other deal- -# ings in this Software without prior written authorization from the X Consor- -# tium. -# -# -# FSF changes to this file are in the public domain. -# -# Calling this script install-sh is preferred over install.sh, to prevent -# `make' implicit rules from creating a file called install from it -# when there is no Makefile. -# -# This script is compatible with the BSD install script, but was written -# from scratch. - -nl=' -' -IFS=" "" $nl" - -# set DOITPROG to echo to test this script - -# Don't use :- since 4.3BSD and earlier shells don't like it. -doit="${DOITPROG-}" -if test -z "$doit"; then - doit_exec=exec -else - doit_exec=$doit -fi - -# Put in absolute file names if you don't have them in your path; -# or use environment vars. - -mvprog="${MVPROG-mv}" -cpprog="${CPPROG-cp}" -chmodprog="${CHMODPROG-chmod}" -chownprog="${CHOWNPROG-chown}" -chgrpprog="${CHGRPPROG-chgrp}" -stripprog="${STRIPPROG-strip}" -rmprog="${RMPROG-rm}" -mkdirprog="${MKDIRPROG-mkdir}" - -posix_glob= -posix_mkdir= - -# Desired mode of installed file. -mode=0755 - -chmodcmd=$chmodprog -chowncmd= -chgrpcmd= -stripcmd= -rmcmd="$rmprog -f" -mvcmd="$mvprog" -src= -dst= -dir_arg= -dstarg= -no_target_directory= - -usage="Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE - or: $0 [OPTION]... SRCFILES... DIRECTORY - or: $0 [OPTION]... -t DIRECTORY SRCFILES... - or: $0 [OPTION]... -d DIRECTORIES... - -In the 1st form, copy SRCFILE to DSTFILE. -In the 2nd and 3rd, copy all SRCFILES to DIRECTORY. -In the 4th, create DIRECTORIES. - -Options: --c (ignored) --d create directories instead of installing files. --g GROUP $chgrpprog installed files to GROUP. --m MODE $chmodprog installed files to MODE. --o USER $chownprog installed files to USER. --s $stripprog installed files. --t DIRECTORY install into DIRECTORY. --T report an error if DSTFILE is a directory. ---help display this help and exit. ---version display version info and exit. - -Environment variables override the default commands: - CHGRPPROG CHMODPROG CHOWNPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG -" - -while test $# -ne 0; do - case $1 in - -c) shift - continue;; - - -d) dir_arg=true - shift - continue;; - - -g) chgrpcmd="$chgrpprog $2" - shift - shift - continue;; - - --help) echo "$usage"; exit $?;; - - -m) mode=$2 - shift - shift - case $mode in - *' '* | *' '* | *' -'* | *'*'* | *'?'* | *'['*) - echo "$0: invalid mode: $mode" >&2 - exit 1;; - esac - continue;; - - -o) chowncmd="$chownprog $2" - shift - shift - continue;; - - -s) stripcmd=$stripprog - shift - continue;; - - -t) dstarg=$2 - shift - shift - continue;; - - -T) no_target_directory=true - shift - continue;; - - --version) echo "$0 $scriptversion"; exit $?;; - - --) shift - break;; - - -*) echo "$0: invalid option: $1" >&2 - exit 1;; - - *) break;; - esac -done - -if test $# -ne 0 && test -z "$dir_arg$dstarg"; then - # When -d is used, all remaining arguments are directories to create. - # When -t is used, the destination is already specified. - # Otherwise, the last argument is the destination. Remove it from $@. - for arg - do - if test -n "$dstarg"; then - # $@ is not empty: it contains at least $arg. - set fnord "$@" "$dstarg" - shift # fnord - fi - shift # arg - dstarg=$arg - done -fi - -if test $# -eq 0; then - if test -z "$dir_arg"; then - echo "$0: no input file specified." >&2 - exit 1 - fi - # It's OK to call `install-sh -d' without argument. - # This can happen when creating conditional directories. - exit 0 -fi - -if test -z "$dir_arg"; then - trap '(exit $?); exit' 1 2 13 15 - - # Set umask so as not to create temps with too-generous modes. - # However, 'strip' requires both read and write access to temps. - case $mode in - # Optimize common cases. - *644) cp_umask=133;; - *755) cp_umask=22;; - - *[0-7]) - if test -z "$stripcmd"; then - u_plus_rw= - else - u_plus_rw='% 200' - fi - cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;; - *) - if test -z "$stripcmd"; then - u_plus_rw= - else - u_plus_rw=,u+rw - fi - cp_umask=$mode$u_plus_rw;; - esac -fi - -for src -do - # Protect names starting with `-'. - case $src in - -*) src=./$src ;; - esac - - if test -n "$dir_arg"; then - dst=$src - dstdir=$dst - test -d "$dstdir" - dstdir_status=$? - else - - # Waiting for this to be detected by the "$cpprog $src $dsttmp" command - # might cause directories to be created, which would be especially bad - # if $src (and thus $dsttmp) contains '*'. - if test ! -f "$src" && test ! -d "$src"; then - echo "$0: $src does not exist." >&2 - exit 1 - fi - - if test -z "$dstarg"; then - echo "$0: no destination specified." >&2 - exit 1 - fi - - dst=$dstarg - # Protect names starting with `-'. - case $dst in - -*) dst=./$dst ;; - esac - - # If destination is a directory, append the input filename; won't work - # if double slashes aren't ignored. - if test -d "$dst"; then - if test -n "$no_target_directory"; then - echo "$0: $dstarg: Is a directory" >&2 - exit 1 - fi - dstdir=$dst - dst=$dstdir/`basename "$src"` - dstdir_status=0 - else - # Prefer dirname, but fall back on a substitute if dirname fails. - dstdir=` - (dirname "$dst") 2>/dev/null || - expr X"$dst" : 'X(.*[^/])//*[^/][^/]*/*$' | \ - X"$dst" : 'X(//)[^/]' | \ - X"$dst" : 'X(//)$' | \ - X"$dst" : 'X(/)' | . 2>/dev/null || - echo X"$dst" | - sed '/^X(.*[^/])//*[^/][^/]*/*$/{ - s//\1/ - q - } - /^X(//)[^/].*/{ - s//\1/ - q - } - /^X(//)$/{ - s//\1/ - q - } - /^X(/).*/{ - s//\1/ - q - } - s/.*/./; q' - ` - - test -d "$dstdir" - dstdir_status=$? - fi - fi - - obsolete_mkdir_used=false - - if test $dstdir_status != 0; then - case $posix_mkdir in - '') - # Create intermediate dirs using mode 755 as modified by the umask. - # This is like FreeBSD 'install' as of 1997-10-28. - umask=`umask` - case $stripcmd.$umask in - # Optimize common cases. - *[2367][2367]) mkdir_umask=$umask;; - .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;; - - *[0-7]) - mkdir_umask=`expr $umask + 22 \ - - $umask % 100 % 40 + $umask % 20 \ - - $umask % 10 % 4 + $umask % 2 - `;; - *) mkdir_umask=$umask,go-w;; - esac - - # With -d, create the new directory with the user-specified mode. - # Otherwise, rely on $mkdir_umask. - if test -n "$dir_arg"; then - mkdir_mode=-m$mode - else - mkdir_mode= - fi - - posix_mkdir=false - case $umask in - *[123567][0-7][0-7]) - # POSIX mkdir -p sets u+wx bits regardless of umask, which - # is incompatible with FreeBSD 'install' when (umask & 300) != 0. - ;; - *) - tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$ - trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0 - - if (umask $mkdir_umask && - exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1 - then - if test -z "$dir_arg" || { - # Check for POSIX incompatibilities with -m. - # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or - # other-writeable bit of parent directory when it shouldn't. - # FreeBSD 6.1 mkdir -m -p sets mode of existing directory. - ls_ld_tmpdir=`ls -ld "$tmpdir"` - case $ls_ld_tmpdir in - d????-?r-*) different_mode=700;; - d????-?--*) different_mode=755;; - *) false;; - esac && - $mkdirprog -m$different_mode -p -- "$tmpdir" && { - ls_ld_tmpdir_1=`ls -ld "$tmpdir"` - test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1" - } - } - then posix_mkdir=: - fi - rmdir "$tmpdir/d" "$tmpdir" - else - # Remove any dirs left behind by ancient mkdir implementations. - rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null - fi - trap '' 0;; - esac;; - esac - - if - $posix_mkdir && ( - umask $mkdir_umask && - $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir" - ) - then : - else - - # The umask is ridiculous, or mkdir does not conform to POSIX, - # or it failed possibly due to a race condition. Create the - # directory the slow way, step by step, checking for races as we go. - - case $dstdir in - /*) prefix=/ ;; - -*) prefix=./ ;; - *) prefix= ;; - esac - - case $posix_glob in - '') - if (set -f) 2>/dev/null; then - posix_glob=true - else - posix_glob=false - fi ;; - esac - - oIFS=$IFS - IFS=/ - $posix_glob && set -f - set fnord $dstdir - shift - $posix_glob && set +f - IFS=$oIFS - - prefixes= - - for d - do - test -z "$d" && continue - - prefix=$prefix$d - if test -d "$prefix"; then - prefixes= - else - if $posix_mkdir; then - (umask=$mkdir_umask && - $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break - # Don't fail if two instances are running concurrently. - test -d "$prefix" || exit 1 - else - case $prefix in - *'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\''/g"`;; - *) qprefix=$prefix;; - esac - prefixes="$prefixes '$qprefix'" - fi - fi - prefix=$prefix/ - done - - if test -n "$prefixes"; then - # Don't fail if two instances are running concurrently. - (umask $mkdir_umask && - eval "$doit_exec $mkdirprog $prefixes") || - test -d "$dstdir" || exit 1 - obsolete_mkdir_used=true - fi - fi - fi - - if test -n "$dir_arg"; then - { test -z "$chowncmd" || $doit $chowncmd "$dst"; } && - { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } && - { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false || - test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1 - else - - # Make a couple of temp file names in the proper directory. - dsttmp=$dstdir/_inst.$$_ - rmtmp=$dstdir/_rm.$$_ - - # Trap to clean up those temp files at exit. - trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0 - - # Copy the file name to the temp name. - (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") && - - # and set any options; do chmod last to preserve setuid bits. - # - # If any of these fail, we abort the whole thing. If we want to - # ignore errors from any of these, just make sure not to ignore - # errors from the above "$doit $cpprog $src $dsttmp" command. - # - { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } \ - && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } \ - && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } \ - && { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } && - - # Now rename the file to the real destination. - { $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null \ - || { - # The rename failed, perhaps because mv can't rename something else - # to itself, or perhaps because mv is so ancient that it does not - # support -f. - - # Now remove or move aside any old file at destination location. - # We try this two ways since rm can't unlink itself on some - # systems and the destination file might be busy for other - # reasons. In this case, the final cleanup might fail but the new - # file should still install successfully. - { - if test -f "$dst"; then - $doit $rmcmd -f "$dst" 2>/dev/null \ - || { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null \ - && { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }; }\ - || { - echo "$0: cannot unlink or rename $dst" >&2 - (exit 1); exit 1 - } - else - : - fi - } && - - # Now rename the file to the real destination. - $doit $mvcmd "$dsttmp" "$dst" - } - } || exit 1 - - trap '' 0 - fi -done - -# Local variables: -# eval: (add-hook 'write-file-hooks 'time-stamp) -# time-stamp-start: "scriptversion=" -# time-stamp-format: "%:y-%02m-%02d.%02H" -# time-stamp-end: "$" -# End:
Deleted: trunk/geanysendmail/makefile.win32 =================================================================== --- trunk/geanysendmail/makefile.win32 2009-10-11 19:58:40 UTC (rev 979) +++ trunk/geanysendmail/makefile.win32 2009-10-11 19:59:59 UTC (rev 980) @@ -1,60 +0,0 @@ -# -# localwin32.mk is an optional file to override make variables. -# Use localwin32.mk instead of editing variables as it is included in sub -# makefiles. -# localwin32.mk to set PREFIX instead of the default C:\libs -# For MSYS use localwin32.mk to set CP and RM. -# By default this will work in a Windows command prompt. - -CC = gcc -CP = copy -RM = del -PREFIX = C:\libs - -GEANY_SRC = c:\geany_svn -TARGET = geanysendmail.dll -.SUFFIXES: .c .o --include localwin32.mk - - -OBJS = geanysendmail.o -INCLUDEDIRS= -I. \ - -I$(GEANY_SRC) \ - -I$(GEANY_SRC)\src \ - -I$(GEANY_SRC)\plugins \ - -I$(GEANY_SRC)\tagmanager\include \ - -I$(GEANY_SRC)\scintilla\include \ - -I$(PREFIX)/include/gtk-2.0 \ - -I$(PREFIX)/lib/gtk-2.0/include \ - -I$(PREFIX)/include/atk-1.0 \ - -I$(PREFIX)/include/pango-1.0 \ - -I$(PREFIX)/include/cairo \ - -I$(PREFIX)/include/glib-2.0 \ - -I$(PREFIX)/lib/glib-2.0/include \ - -I$(PREFIX)/include/gettext \ - -I$(PREFIX)/include \ - -I$(ASPELL_PREFIX)/interfaces/cc - -ALL_GTK_LIBS= \ - -L"$(PREFIX)/lib" \ - -lgtk-win32-2.0 -lgdk-win32-2.0 -latk-1.0 -lgdk_pixbuf-2.0 -lpangowin32-1.0 -lgdi32 \ - -lpango-1.0 -lgobject-2.0 -lgmodule-2.0 -lgthread-2.0 -lglib-2.0 -lintl -liconv -CCFLAGS=-Wall -O2 -mms-bitfields -DHAVE_CONFIG_H -DLOCALEDIR="share" - - -all: $(TARGET) - -deps.mak: - $(CC) -MM $(CCFLAGS) $(INCLUDEDIRS) src/*.c >deps.mak - -geanysendmail.o: - $(CC) $(CCFLAGS) $(INCLUDEDIRS) -c $< - -$(TARGET): deps.mak $(OBJS) - $(CC) -shared $(OBJS) $(ALL_GTK_LIBS) -o $(TARGET) - -clean: - -$(RM) deps.mak *.o *.dll - -# Generate header dependencies with "make deps.mak" -include deps.mak
Deleted: trunk/geanysendmail/missing =================================================================== --- trunk/geanysendmail/missing 2009-10-11 19:58:40 UTC (rev 979) +++ trunk/geanysendmail/missing 2009-10-11 19:59:59 UTC (rev 980) @@ -1,367 +0,0 @@ -#! /bin/sh -# Common stub for a few missing GNU programs while installing. - -scriptversion=2006-05-10.23 - -# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006 -# Free Software Foundation, Inc. -# Originally by Fran,cois Pinard pinard@iro.umontreal.ca, 1996. - -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2, or (at your option) -# any later version. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. - -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA -# 02110-1301, USA. - -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. - -if test $# -eq 0; then - echo 1>&2 "Try `$0 --help' for more information" - exit 1 -fi - -run=: -sed_output='s/.* --output[ =]([^ ]*).*/\1/p' -sed_minuso='s/.* -o ([^ ]*).*/\1/p' - -# In the cases where this matters, `missing' is being run in the -# srcdir already. -if test -f configure.ac; then - configure_ac=configure.ac -else - configure_ac=configure.in -fi - -msg="missing on your system" - -case $1 in ---run) - # Try to run requested program, and just exit if it succeeds. - run= - shift - "$@" && exit 0 - # Exit code 63 means version mismatch. This often happens - # when the user try to use an ancient version of a tool on - # a file that requires a minimum version. In this case we - # we should proceed has if the program had been absent, or - # if --run hadn't been passed. - if test $? = 63; then - run=: - msg="probably too old" - fi - ;; - - -h|--h|--he|--hel|--help) - echo "\ -$0 [OPTION]... PROGRAM [ARGUMENT]... - -Handle `PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an -error status if there is no known handling for PROGRAM. - -Options: - -h, --help display this help and exit - -v, --version output version information and exit - --run try to run the given command, and emulate it if it fails - -Supported PROGRAM values: - aclocal touch file `aclocal.m4' - autoconf touch file `configure' - autoheader touch file `config.h.in' - autom4te touch the output file, or create a stub one - automake touch all `Makefile.in' files - bison create `y.tab.[ch]', if possible, from existing .[ch] - flex create `lex.yy.c', if possible, from existing .c - help2man touch the output file - lex create `lex.yy.c', if possible, from existing .c - makeinfo touch the output file - tar try tar, gnutar, gtar, then tar without non-portable flags - yacc create `y.tab.[ch]', if possible, from existing .[ch] - -Send bug reports to bug-automake@gnu.org." - exit $? - ;; - - -v|--v|--ve|--ver|--vers|--versi|--versio|--version) - echo "missing $scriptversion (GNU Automake)" - exit $? - ;; - - -*) - echo 1>&2 "$0: Unknown `$1' option" - echo 1>&2 "Try `$0 --help' for more information" - exit 1 - ;; - -esac - -# Now exit if we have it, but it failed. Also exit now if we -# don't have it and --version was passed (most likely to detect -# the program). -case $1 in - lex|yacc) - # Not GNU programs, they don't have --version. - ;; - - tar) - if test -n "$run"; then - echo 1>&2 "ERROR: `tar' requires --run" - exit 1 - elif test "x$2" = "x--version" || test "x$2" = "x--help"; then - exit 1 - fi - ;; - - *) - if test -z "$run" && ($1 --version) > /dev/null 2>&1; then - # We have it, but it failed. - exit 1 - elif test "x$2" = "x--version" || test "x$2" = "x--help"; then - # Could not run --version or --help. This is probably someone - # running `$TOOL --version' or `$TOOL --help' to check whether - # $TOOL exists and not knowing $TOOL uses missing. - exit 1 - fi - ;; -esac - -# If it does not exist, or fails to run (possibly an outdated version), -# try to emulate it. -case $1 in - aclocal*) - echo 1>&2 "\ -WARNING: `$1' is $msg. You should only need it if - you modified `acinclude.m4' or `${configure_ac}'. You might want - to install the `Automake' and `Perl' packages. Grab them from - any GNU archive site." - touch aclocal.m4 - ;; - - autoconf) - echo 1>&2 "\ -WARNING: `$1' is $msg. You should only need it if - you modified `${configure_ac}'. You might want to install the - `Autoconf' and `GNU m4' packages. Grab them from any GNU - archive site." - touch configure - ;; - - autoheader) - echo 1>&2 "\ -WARNING: `$1' is $msg. You should only need it if - you modified `acconfig.h' or `${configure_ac}'. You might want - to install the `Autoconf' and `GNU m4' packages. Grab them - from any GNU archive site." - files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(([^)]*)).*/\1/p' ${configure_ac}` - test -z "$files" && files="config.h" - touch_files= - for f in $files; do - case $f in - *:*) touch_files="$touch_files "`echo "$f" | - sed -e 's/^[^:]*://' -e 's/:.*//'`;; - *) touch_files="$touch_files $f.in";; - esac - done - touch $touch_files - ;; - - automake*) - echo 1>&2 "\ -WARNING: `$1' is $msg. You should only need it if - you modified `Makefile.am', `acinclude.m4' or `${configure_ac}'. - You might want to install the `Automake' and `Perl' packages. - Grab them from any GNU archive site." - find . -type f -name Makefile.am -print | - sed 's/.am$/.in/' | - while read f; do touch "$f"; done - ;; - - autom4te) - echo 1>&2 "\ -WARNING: `$1' is needed, but is $msg. - You might have modified some files without having the - proper tools for further handling them. - You can get `$1' as part of `Autoconf' from any GNU - archive site." - - file=`echo "$*" | sed -n "$sed_output"` - test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` - if test -f "$file"; then - touch $file - else - test -z "$file" || exec >$file - echo "#! /bin/sh" - echo "# Created by GNU Automake missing as a replacement of" - echo "# $ $@" - echo "exit 0" - chmod +x $file - exit 1 - fi - ;; - - bison|yacc) - echo 1>&2 "\ -WARNING: `$1' $msg. You should only need it if - you modified a `.y' file. You may need the `Bison' package - in order for those modifications to take effect. You can get - `Bison' from any GNU archive site." - rm -f y.tab.c y.tab.h - if test $# -ne 1; then - eval LASTARG="${$#}" - case $LASTARG in - *.y) - SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'` - if test -f "$SRCFILE"; then - cp "$SRCFILE" y.tab.c - fi - SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'` - if test -f "$SRCFILE"; then - cp "$SRCFILE" y.tab.h - fi - ;; - esac - fi - if test ! -f y.tab.h; then - echo >y.tab.h - fi - if test ! -f y.tab.c; then - echo 'main() { return 0; }' >y.tab.c - fi - ;; - - lex|flex) - echo 1>&2 "\ -WARNING: `$1' is $msg. You should only need it if - you modified a `.l' file. You may need the `Flex' package - in order for those modifications to take effect. You can get - `Flex' from any GNU archive site." - rm -f lex.yy.c - if test $# -ne 1; then - eval LASTARG="${$#}" - case $LASTARG in - *.l) - SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'` - if test -f "$SRCFILE"; then - cp "$SRCFILE" lex.yy.c - fi - ;; - esac - fi - if test ! -f lex.yy.c; then - echo 'main() { return 0; }' >lex.yy.c - fi - ;; - - help2man) - echo 1>&2 "\ -WARNING: `$1' is $msg. You should only need it if - you modified a dependency of a manual page. You may need the - `Help2man' package in order for those modifications to take - effect. You can get `Help2man' from any GNU archive site." - - file=`echo "$*" | sed -n "$sed_output"` - test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` - if test -f "$file"; then - touch $file - else - test -z "$file" || exec >$file - echo ".ab help2man is required to generate this page" - exit 1 - fi - ;; - - makeinfo) - echo 1>&2 "\ -WARNING: `$1' is $msg. You should only need it if - you modified a `.texi' or `.texinfo' file, or any other file - indirectly affecting the aspect of the manual. The spurious - call might also be the consequence of using a buggy `make' (AIX, - DU, IRIX). You might want to install the `Texinfo' package or - the `GNU make' package. Grab either from any GNU archive site." - # The file to touch is that specified with -o ... - file=`echo "$*" | sed -n "$sed_output"` - test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` - if test -z "$file"; then - # ... or it is the one specified with @setfilename ... - infile=`echo "$*" | sed 's/.* ([^ ]*) *$/\1/'` - file=`sed -n ' - /^@setfilename/{ - s/.* ([^ ]*) *$/\1/ - p - q - }' $infile` - # ... or it is derived from the source name (dir/f.texi becomes f.info) - test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info - fi - # If the file does not exist, the user really needs makeinfo; - # let's fail without touching anything. - test -f $file || exit 1 - touch $file - ;; - - tar) - shift - - # We have already tried tar in the generic part. - # Look for gnutar/gtar before invocation to avoid ugly error - # messages. - if (gnutar --version > /dev/null 2>&1); then - gnutar "$@" && exit 0 - fi - if (gtar --version > /dev/null 2>&1); then - gtar "$@" && exit 0 - fi - firstarg="$1" - if shift; then - case $firstarg in - *o*) - firstarg=`echo "$firstarg" | sed s/o//` - tar "$firstarg" "$@" && exit 0 - ;; - esac - case $firstarg in - *h*) - firstarg=`echo "$firstarg" | sed s/h//` - tar "$firstarg" "$@" && exit 0 - ;; - esac - fi - - echo 1>&2 "\ -WARNING: I can't seem to be able to run `tar' with the given arguments. - You may want to install GNU tar or Free paxutils, or check the - command line arguments." - exit 1 - ;; - - *) - echo 1>&2 "\ -WARNING: `$1' is needed, and is $msg. - You might have modified some files without having the - proper tools for further handling them. Check the `README' file, - it often tells you about the needed prerequisites for installing - this package. You may also peek at any GNU archive site, in case - some other package would contain this missing `$1' program." - exit 1 - ;; -esac - -exit 0 - -# Local variables: -# eval: (add-hook 'write-file-hooks 'time-stamp) -# time-stamp-start: "scriptversion=" -# time-stamp-format: "%:y-%02m-%02d.%02H" -# time-stamp-end: "$" -# End:
Added: trunk/geanysendmail/waf =================================================================== --- trunk/geanysendmail/waf (rev 0) +++ trunk/geanysendmail/waf 2009-10-11 19:59:59 UTC (rev 980) @@ -0,0 +1,153 @@ +#!/usr/bin/env python +# encoding: utf-8 +# Thomas Nagy, 2005-2009 + +""" +Redistribution and use in source and binary forms, with or without +modification, are permitted provided that the following conditions +are met: + +1. Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + +2. Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + +3. The name of the author may not be used to endorse or promote products + derived from this software without specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE AUTHOR "AS IS" AND ANY EXPRESS OR +IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, +INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR +SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) +HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, +STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING +IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +POSSIBILITY OF SUCH DAMAGE. +""" + +import os, sys +if sys.hexversion<0x203000f: raise ImportError("Waf requires Python >= 2.3") + +if 'PSYCOWAF' in os.environ: + try:import psyco;psyco.full() + except:pass + +VERSION="1.5.7" +REVISION="8edda22ed216daab7aed3d430dc291cf" +INSTALL='' +C1='#+' +C2='#)' +cwd = os.getcwd() +join = os.path.join + +WAF='waf' +def b(x): + return x + +if sys.hexversion>0x300000f: + WAF='waf3' + def b(x): + return x.encode() + +def err(m): + print(('\033[91mError: %s\033[0m' % m)) + sys.exit(1) + +def unpack_wafdir(dir): + f = open(sys.argv[0],'rb') + c = "corrupted waf (%d)" + while 1: + line = f.readline() + if not line: err("run waf-light from a folder containing wafadmin") + if line == b('#==>\n'): + txt = f.readline() + if not txt: err(c % 1) + if f.readline()!=b('#<==\n'): err(c % 2) + break + if not txt: err(c % 3) + txt = txt[1:-1].replace(b(C1), b('\n')).replace(b(C2), b('\r')) + + import shutil, tarfile + try: shutil.rmtree(dir) + except OSError: pass + try: os.makedirs(join(dir, 'wafadmin', 'Tools')) + except OSError: err("Cannot unpack waf lib into %s\nMove waf into a writeable directory" % dir) + + os.chdir(dir) + tmp = 't.tbz2' + t = open(tmp,'wb') + t.write(txt) + t.close() + + try: + t = tarfile.open(tmp) + for x in t: t.extract(x) + t.close() + except: + os.chdir(cwd) + try: shutil.rmtree(dir) + except OSError: pass + err("Waf cannot be unpacked, check that bzip2 support is present") + + os.chmod(join('wafadmin','Tools'), 493) + + os.unlink(tmp) + + if sys.hexversion>0x300000f: + sys.path = [join(dir, 'wafadmin')] + sys.path + import py3kfixes + py3kfixes.fixdir(dir) + + os.chdir(cwd) + +def test(dir): + try: os.stat(join(dir, 'wafadmin')); return os.path.abspath(dir) + except OSError: pass + +def find_lib(): + name = sys.argv[0] + base = os.path.dirname(os.path.abspath(name)) + + #devs use $WAFDIR + w=test(os.environ.get('WAFDIR', '')) + if w: return w + + #waf-light + if name.endswith('waf-light'): + w = test(base) + if w: return w + err("waf-light requires wafadmin -> export WAFDIR=/folder") + + dir = "/lib/%s-%s-%s/" % (WAF, VERSION, REVISION) + for i in [INSTALL,'/usr','/usr/local','/opt']: + w = test(i+dir) + if w: return w + + #waf-local + s = '.%s-%s-%s' + if sys.platform == 'win32': s = s[1:] + dir = join(base, s % (WAF, VERSION, REVISION)) + w = test(dir) + if w: return w + + #unpack + unpack_wafdir(dir) + return dir + +wafdir = find_lib() +w = join(wafdir, 'wafadmin') +t = join(w, 'Tools') +sys.path = [w, t] + sys.path + +import Scripting +Scripting.prepare(t, cwd, VERSION, wafdir) +sys.exit(0) + +#==>
@@ Diff output truncated at 100000 characters. @@
This was sent by the SourceForge.net collaborative development platform, the world's largest Open Source development site.