Reply to this email directly, view it on GitHub, or unsubscribe.
You are receiving this because you are subscribed to this thread.
@nomadbyte,
I think i found the reason. The problem is with [Step into] and not [Step over] as i mentioned.
Please, see if you can advise how to overcome the error.
In fact, the debugger closes the debugging section and not Geany.
Below is the error:
sudo gdb --args ./minicom -D /dev/ttyUSB1
GNU gdb (Ubuntu 8.1.1-0ubuntu1) 8.1.1
Copyright (C) 2018 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law. Type "show copying"
and "show warranty" for details.
This GDB was configured as "x86_64-linux-gnu".
Type "show configuration" for configuration details.
For bug reporting instructions, please see:
<http://www.gnu.org/software/gdb/bugs/>.
Find the GDB manual and other documentation resources online at:
<http://www.gnu.org/software/gdb/documentation/>.
For help, type "help".
Type "apropos word" to search for commands related to "word"...
Reading symbols from ./minicom...done.
(gdb) b 77
Breakpoint 1 at 0x5365: file minicom.c, line 77.
(gdb) s
The program is not being run.
(gdb) run
Starting program: /apps/minicom-2.7.1/debian/minicom/usr/bin/minicom -D /dev/ttyUSB1
Lockfile is stale. Overriding it..
Breakpoint 1, port_init () at minicom.c:77
77 m_setparms(portfd, P_BAUDRATE, P_PARITY, P_BITS, P_STOPB,
(gdb) s
78 P_HASRTS[0] == 'Y', P_HASXON[0] == 'Y');
(gdb) s
77 m_setparms(portfd, P_BAUDRATE, P_PARITY, P_BITS, P_STOPB,
(gdb) s
m_setparms (fd=3, baudr=0x5555557866e0 <mpars+4032> "1500000",
par=0x555555786800 <mpars+4320> "N", bits=0x555555786770 <mpars+4176> "8",
stopb=0x555555786890 <mpars+4464> "1", hwf=1, swf=0) at sysdep1.c:396
396 {
(gdb) s
397 int spd = -1;
(gdb) s
399 int bit = bits[0];
(gdb) s
408 if (portfd_is_socket)
(gdb) s
413 tcgetattr(fd, &tty);
(gdb) s
__GI___tcgetattr (fd=3, termios_p=0x7fffffffde30)
at ../sysdeps/unix/sysv/linux/tcgetattr.c:34
34 ../sysdeps/unix/sysv/linux/tcgetattr.c: No such file or directory.
(gdb) s
38 in ../sysdeps/unix/sysv/linux/tcgetattr.c
(gdb) s
34 in ../sysdeps/unix/sysv/linux/tcgetattr.c
(gdb) s
38 in ../sysdeps/unix/sysv/linux/tcgetattr.c
(gdb) s
40 in ../sysdeps/unix/sysv/linux/tcgetattr.c
(gdb) s
46 in ../sysdeps/unix/sysv/linux/tcgetattr.c
(gdb) s
63 in ../sysdeps/unix/sysv/linux/tcgetattr.c
(gdb) s
42 in ../sysdeps/unix/sysv/linux/tcgetattr.c
(gdb) s
63 in ../sysdeps/unix/sysv/linux/tcgetattr.c
(gdb) s
42 in ../sysdeps/unix/sysv/linux/tcgetattr.c
(gdb) n
Warning:
Cannot insert breakpoint 0.
Cannot access memory at address 0x1ec4635941ad2a3e
__longjmp () at ../sysdeps/x86_64/__longjmp.S:45
45 ../sysdeps/x86_64/__longjmp.S: No such file or directory.
(gdb)
—
Reply to this email directly, view it on GitHub, or unsubscribe.
You are receiving this because you are subscribed to this thread.